Error on config save/copy

Hi
We are getting below error on 7600 router
Router#copy startup-config running-config
Destination filename [running-config]?
%% Non-volatile configuration memory invalid or not present
What could be the possible issue
Br.Subhojit

Hi
Can you show us the output of
show file system
dir nvram
Do you get the startup config when you do a show start
And by the way why are you copying the startup config into the running config?
Thanks
Ankur
"Please rate the post if found useful"

Similar Messages

  • Error message: Could not save copy as "C:..." because the file is already in use or left open by another application

    I always get the Errormessage: Could not save copy as "C:..." bacause the file is already in use or left open by another alpplication
    while trying to save a file as a jpg. even when the file is not left open or in use.. .

    Without knowing exact technical details, nobody can say anything. From genuine issues with your storage devices like block errors or fragmentation to specific security stuff causing delays and blockages in writing files anything is imaginable. Your info is simply insufficient to make even a superficial diagnosis beyond those generics.
    Mylenium

  • SpaceFM Error - Error: Unable to save session file. Permission denied

    Hi.
    I have just installed linux-rt from AUR
    https://aur.archlinux.org/packages.php?ID=51360
    Everything installed correctly and is working so far.
    It's just that whenever I'm with a folder open (even if I dont do anything) and click the X to close the window, this error appears:
    SpaceFM Error
    Error: Unable to save session file.
    Do you want to exit without saving?
    ( Permission denied )
    I usually click yes and nothing happens - or seems to.
    If it helps, I AM able to read, write, copy and delete files.
    The problem ( I THINK ) seems to be just aesthetics AND/OR not affecting me at the moment?
    Any thoughts?
    Thanks in advance.
    EDIT: In fact LOTS of issues just showed up...
    1- Transmission doesn't resume downloads.
    I closed it and opened again and there were no downloads and when I tried to start them again, there was an error saying: Unable to save resume file (or something close)
    2- I just logged in (at the login screen, lol) as root and ALL problems disappeared, transmission saves things again, no more SpaceFM error etc.
    Anyone has any clues what is this permissions problem ?? The whole OS is new and I didn't install anything, it wasn't supposed to be happening.
    Last edited by AndreProgressive (2012-10-28 12:57:21)

    Just stumbled on this, dunno about your other problems, but as far as your spacefm problem, go to ~/.config and sudo rm -r spacefm

  • I am getting an error message that "A copy of Firefox is already open. Only one copy of Firefox can be open at a time" and I don't have any copy open.

    I am getting an error message that "A copy of Firefox is already open. Only one copy of Firefox can be open at a time" and I don't have any copy open. How do I correct this problem? I really like firefox because it runs many technical programs on the web that do not work with safari. I have FireFox version 32.0.1 installed on my MacPro PowerBook OS X 10.7.5. My activity monitor does not show any FireFox activity, so do not know what it is seeing

    This worked, I used the method described in this link http://forums.mozillazine.org/viewtopic.php?t=365156, and opened the Mozilla profile screen with the terminal on my mac, using the language given in the links. Then I duplicated my original profile to save the bookmarks, etc. Put them in a folder listed Duplicate profile with the date. With the open profile screen, I deleted my original profile, created new profile folder and then a new profile. Note that profile cannot be created in the system library, it must be created on the disc, because the library will not allow writing into it. After I created my new profile folder, I dragged all my old information into it, and it worked. Firefox closed and the error disappeared. You must be VERY careful to make sure Firefox is closed anytime you are doing anything with the profile folders. I think that is what caused my original problem.

  • Generic file I/O error. Cannot save VI "filename.VI"

    Hi, I have LV 8.2.  I am having problems saving VI's after editing them.  I am getting the message:
    Generic file I/O error.  Cannot save VI "filename.VI"
    I can recreate the problem by creating a blank VI, placing a property node on the block diagram, right clicking on property and choosing, select property and in the window that pops up expanding Application and clicking on Directory path and clicking OK.  I save this VI to disk.  Then I load the file again and delete the property node. Now if I try to save that I get: Generic file I/O error.  Cannot save VI "filename.VI"
    Furthermore with the real VI that I am having problems with.  If, when I get the cannot save message, I do a "Save as" and save a copy as "filename backup" and then quit labview without saving the "filename" vi, when I run LabVIEW again I get:
    The last time you ran LabVIEW, an internal rror or crash occured at save.cpp, line 821.
    I click investigate internal error message now and get told there is a logfile of the error.  The contents of the file on one occasion were, quote:
    #Date: Thu, 9 Nov 2006 10:56:40 a.m.
    #OSName: Windows NT
    #OSVers: 5.1
    #AppName: LabVIEW
    #Version: 8.2
    #AppKind: FDS
    #AppModDate: 07/27/2006 00:08 GMT
    .\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics.vi" (0x05332ed0)] ident: [LinkIdentity "Instance          43 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
    $Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
    0x008CCBB6 - LabVIEW <unknown> + 0
    0x008D17CE - LabVIEW <unknown> + 0
    0x0100F864 - LabVIEW <unknown> + 0
    0x00528E26 - LabVIEW <unknown> + 0
    0x00529342 - LabVIEW <unknown> + 0
    0x0052960C - LabVIEW <unknown> + 0
    0x004D6D2F - LabVIEW <unknown> + 0
    0x004D7C95 - LabVIEW <unknown> + 0
    0x004D7CD8 - LabVIEW <unknown> + 0
    0x004DBA95 - LabVIEW <unknown> + 0
    0x004DBD50 - LabVIEW <unknown> + 0
    0x0051FD4C - LabVIEW <unknown> + 0
    0x0051FD6F - LabVIEW <unknown> + 0
    0x0122CA73 - LabVIEW <unknown> + 0
    0x77E735DD - kernel32 <unknown> + 0
    .\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics 9 nov BU1.vi" (0x05332ed0)] ident: [LinkIdentity "Instance          45 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
    $Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
    0x00D0FE4B - LabVIEW <unknown> + 0
    0x008C8E17 - LabVIEW <unknown> + 0
    0x008D1726 - LabVIEW <unknown> + 0
    0x008D212C - LabVIEW <unknown> + 0
    0x00C41E5E - LabVIEW <unknown> + 0
    0x00C46F31 - LabVIEW <unknown> + 0
    0x00C4796D - LabVIEW <unknown> + 0
    0x00C497C6 - LabVIEW <unknown> + 0
    0x004CCB39 - LabVIEW <unknown> + 0
    0x004D7C95 - LabVIEW <unknown> + 0
    0x004DF19A - LabVIEW <unknown> + 0
    0x77D48654 - USER32 <unknown> + 0
    0x77D48723 - USER32 <unknown> + 0
    0x77D48999 - USER32 <unknown> + 0
    0x77D48FD2 - USER32 <unknown> + 0
    End of Quote:
    Any ideas?

    Hello,
    Sorry you've encountered this problem.  The cpp error is a known issue, which is filed under corrective action request number : 42BI4OO5.  In a nutshell, this means R&D is looking into the problem.  I attempted to reproduce the problem as you described below, but I did not get the "Generic file I/O error" as you did.
    If you have any further insight or detail which perhaps is the key to reproducing this, please repost, and I'll try to reproduce this again!  In the mean time, does it help to copy and paste your code to a new VI, or does that VI suffer the same problem?
    Thank you,
    Best Regards,
    JLS
    PS -
    Standard CAR Response:
    "This was reported to R&D (42BI4OO5 CAR ID) for further investigation. Thanks for the feedback!"
    Best,
    JLS
    Sixclear

  • The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

    When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
    error 0x80042316"
    The odd thing is that when I start the backup manually, it works fine. When  it runs automatically the error appears.
    When doing a SFC /scannow I do get errors that can't be corrected.
    Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

    Hi,
    0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
    Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
    Meanwhile please provide the result of:
    vssadmin list providers
    vssadmin list writers
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
    Hi,
    I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
    Also:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Provider name: 'Microsoft Software Shadow Copy provider 1.0'
       Provider type: System
       Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
       Version: 1.0.0.7
    AND:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Writer name: 'System Writer'
       Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
       Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
       State: [1] Stable
       Last error: No error
    Writer name: 'SqlServerWriter'
       Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
       Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
       State: [1] Stable
       Last error: No error
    Writer name: 'ASR Writer'
       Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
       Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
       State: [1] Stable
       Last error: No error
    Writer name: 'Shadow Copy Optimization Writer'
       Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
       Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
       State: [1] Stable
       Last error: No error
    Writer name: 'COM+ REGDB Writer'
       Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
       Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
       State: [1] Stable
       Last error: No error
    Writer name: 'Registry Writer'
       Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
       Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
       State: [1] Stable
       Last error: No error
    Writer name: 'DFS Replication service writer'
       Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
       Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
       State: [1] Stable
       Last error: No error
    Writer name: 'Dhcp Jet Writer'
       Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
       Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
       State: [1] Stable
       Last error: No error
    Writer name: 'NTDS'
       Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
       Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Metabase Writer'
       Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
       Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
       State: [1] Stable
       Last error: No error
    Writer name: 'BITS Writer'
       Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
       Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Config Writer'
       Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
       Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'WMI Writer'
       Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
       Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
       State: [1] Stable
       Last error: No error
    Writer name: 'NPS VSS Writer'
       Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
       Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
       State: [1] Stable
       Last error: No error

  • Microsoft.WebApplication.targets 182 5 error MSB3030 Could not copy the file because it was not found

    We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
    getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
    We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
    We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
    update.
    <package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
    <package id="angularjs" version="1.2.23" targetFramework="net451" />
    <package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
    <package id="angularjs" version="1.3.8" targetFramework="net451" />
    After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
    Task "Copy" (TaskId:395)
    16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
    Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
    Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
    16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
    Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
    Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
    Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
    Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
    I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
    in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS. 
    Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
    The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
    <Content Include="Scripts\angular-animate.js" />
    <Content Include="Scripts\angular-animate.min.js" />
    <Content Include="Scripts\angular-aria.js" />
    <Content Include="Scripts\angular-aria.min.js" />
    <Content Include="Scripts\angular-cookies.js" />
    <Content Include="Scripts\angular-cookies.min.js" />
    <Content Include="Scripts\angular-csp.css" />
    <Content Include="Scripts\angular-loader.js" />
    <Content Include="Scripts\angular-loader.min.js" />
    <Content Include="Scripts\angular-messages.js" />
    <Content Include="Scripts\angular-messages.min.js" />
    <Content Include="Scripts\angular-mocks.js" />
    <Content Include="Scripts\angular-resource.js" />
    <Content Include="Scripts\angular-resource.min.js" />
    <Content Include="Scripts\angular-route.js" />
    <Content Include="Scripts\angular-route.min.js" />
    <Content Include="Scripts\angular-sanitize.js" />
    <Content Include="Scripts\angular-sanitize.min.js" />
    <Content Include="Scripts\angular-scenario.js" />
    <Content Include="Scripts\angular-touch.js" />
    <Content Include="Scripts\angular-touch.min.js" />
    Is there anything I forgot to mention that would help me figure out what is going on?
    What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
    Thank you very much in advance!
    -Igor
    -Igor

    Hi Igor,
    For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
    You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
    https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
    https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
    Best regards, 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • PPT has found an error and cannot save the file in Microsoft Powerpoint2010

    I have been working in 2010 for 6 months and this is the 3rd time I have experienced this error.  I am using my own 2010- created, macro-enabled template - I want to save the file but I get an error message stating PPT
    has found an error and cannot save the file. 
    This has happened on both newly created files using this template, and files previously successfully saved.  The template has been used without error many, many times.
    I have on occassion been able to save as a 97-2003 file and then resave (with some loss of function) as a 2010 macro-enabled file, on another occassion I was not able to do this and lost some work.
    Copying into a new document didn't solve the problem. Copying into a different template didn't solve the problem.
    Any ideas what is happening, and how I can stop it happening?
    Kind regards

    Hi,
    Have you tried saving the file in *.pptm format (basically this extension is for powerpoint presentation with macros)
    Maybe try Save As and see if you can save it under a different name.
    Once you get the file closed, then reopen PPT and go to Office Button | PPT Options | Resources. Run Office Diagnostics there.
    In addition, make sure you have a local printer driver installed and set as the default printer. And it really might fix the issue.
    Here's info on what to do:http://www.pptfaq.com/FAQ00952.htm
    Sincerely

  • OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

    Hi,
    Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
    I check free space at both server and client side, they are very sufficient.
    I also checked directory exists for REPORTXX_TMP variable.
    My user call reports via URL (rwservlet) and it occur for all reports.
    How I can solve this problem?
    Thanks in advance.
    Tawatchai R.

    Hi,
    have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
    Thanks in advance. Axel

  • Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

    Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
    The paid upgrade of "Converter" doesn't work.
    Instructive documentation - not very good.
    Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
    Could use timer tracking of the record process.
    Are there operating system limitations? (Have Windows XP Pro)

    That is an issue for the developer of that Download Helper.

  • Error 7 occurred at Copy in ABAPI Dist New VI Library.vi​- ABAPI Dist Chk for Destinatio​ns.vi- ABA​PI Copy Files and Apply Settings.v​i- EBEP_In​voke_Build​_Engine.vi​- EBUIP_Bu​ild_Invoke​.vi- EBUIP​_Build_Inv​oke.vi.Pro​xyCaller

    When I try to build executables in LabView 8.01 I get message:
    Error 7 occurred at Copy in ABAPI Dist New VI Library.vi->ABAPI Dist Chk for Destinations.vi->ABAPI Copy Files and Apply Settings.vi->EBEP_Invoke_Build_Engine.vi->EBUIP_Bu​ild_Invoke.vi->EBUIP_Build_Invoke.vi.ProxyCaller
    Best Regards

    I got the same error as I tried to build my application, the reason was the string I set for the 'Build specification name' property of my build.
    I changed from '3DC - Dlog Data Compacter ' to '3DC' and it worked afterwards..quite strange behaviour..

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • When I try to download and open Firefox with OS 10.6.3 I get an error message saying "A copy of Firefox is already open" -- and it's not.

    I have a new MacBook Pro running OS 10.6.3. Every time I download Firefox and try to open it, I get an error message saying, "A copy of Firefox is already open." And it's not.
    == This happened ==
    Just once or twice
    == I bought my new computer. ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Bonjour,
    Je ne peux pas ouvrir Firefox. Voici le message que je reçois : " Firefox est déjà en cours d'exécution mais ne répond pas. Pour ouvrir une nouvelle fenêtre, vous devez d'abord arrêter le processus Firefox existant ou redémarrer votre système." Je ne vois pas de processus existant.
    Si je me sers de copie de documents PDF et qu'il y a des liens dans le document, les liens ne fonctionnent pas.
    Armande

  • Error while trying to copy template from another application

    Hi,
    I am getting this error while trying to copy template from another application:
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    This report is located here:
    Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
    best regards,

    It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
    Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
    The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
    I would just as a matter of course reset the TC to factory and redo its setup.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
    Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
    No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

  • Getting error while i save sales order

    Hi,
    I am getting error when i save my sales order that
    Company code 1000 and co area 1000 have different period determination – For this i maintain okkp also.
    But still i am getting the same error.
    Thanks in advance

    Chk out for ur Fiscal Year variant in:
    OKKP for ur controlling area and
    OB37 for ur company code
    Hope this helps
    *Reward if does
    Rgds

Maybe you are looking for