Error on Forms 9i execution

When i execute Forms Builder appears the follow error:
It wasn't possible to find the dinamic link library OCI.DLL in the specified path c:\oracle\ora90\bin; .........
And this error doesn't allow me to run or compile a form.
Thanks.
Oracle 9i forms developer - oracle 9iDS release 2.

You must have your environment mixed up. iDS doesn't have any dependencies on an Oracle9i Database.
Make that in the environment you are running the Forms Builder, you have the right values (e.g. the Forms ones) in the front of the your environment variables.
Regards,
Robin Zimmermann
Forms Product Management

Similar Messages

System Error: RSDRC / FORM AUTHORITY_CHECK RSDRC

Hello,
I am having a problem regarding the execution of an Infospoke. This infospoke has an ODS as source and a DB table as a destination. Whenever I try to start the extraction of data a window pops up telling an error has occurred during exportation process. The monitor shows the following message: "System Error: RSDRC / FORM AUTHORITY_CHECK RSDRC". Its ID message is DBMAN.
I have been trying to solve this problem through several ways but I didn't succed. I look forward to receive some helping comment so that I can get throuh this problem.
Many thanks in advanced
Matias

This is a authorization errror. Please make sure you have enuff authorizations to run the infospoke. Refer to the following thread...
RFC destination error in transport
Hope this helps.

Error Running Forms: Failure of server APACHE bridge

Hi Everyone,
I have this problem on windows 7 64-bit... installation went fine without any errors.
Forms was working fine, i was able to run test form, and a form that i created, and both were running properly..
suddenly, while testing a new form module, it didn't work, and its showing :
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF. I stopped and started the wls_forms and it didn't solve the problem..
i couldn't get to a solution anywhere, is it a problem with weblogic configuration? but how was it working well at the begining... if weblogic services are not starting, then what's the fix for that?
Help would be appreciated...
Thanks..

No, but as said you installed components (the HTTP Server) you wouldn't need for development. Did you start WLS_FORMS?
In any case the latest version of forms would be 11.1.2 where the installation process for a development machine is much easier.
You'd need
- wls1035_generic.jar and a 64bit java runtime
- the 64bit version of forms 11.1.2: http://download.oracle.com/otn/nt/middleware/11g/111200/ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1.zip
of course you can install the 32bit version of forms too on your 64bit machine.
then during installation just check "development mode", and you get a development installation like you got with iDS 10.1.2 with one weblogic instance instead of 3 and all the components you won't need (like webcache or the http server) won't be installed.
cheers

"Invalid Cursor" Error in Form

Hi,
I wrote a procedure that take a REF CURSOR as an IN OUT argument. This procedure does an "OPEN cursor FOR qry" with a dynamic query:
OPEN l_cursor FOR
       'SELECT A '||
         'FROM B '||
        'WHERE C = :l_var'
     USING myVar;After calling the procedure, I do a LOOP with FETCH.
It works well when I use it in SQL*Plus with DBMS_OUTPUT but it returns a "ORA-01001 invalid cursor" error in Forms.
Any help is welcome!
Regards,
Olivier.

I found a solution on Metalink:
Note:170881.1
Note: 1007395.6
Olivier.

Getting an error when i am execution a BI query using ABAP.

Hi Expert,
I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
Property Data Integrity has been set differently to the system default.
Current setting: 0 for GHRGPDM12
System default: u2019 7 u2018
As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
when i am debugging , I am getting error from
create instance of cl_rsr_request
CREATE OBJECT r_request
EXPORTING
i_genuniid = p_genuniid.
this FM. Its not able to create the object. Can any one please help me out.
Thanks in advance.
Regards
Satrajit

Hi,
I am able to solve this problem
Regards
Satrajit

Error while posting GR "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX

Dear Experts,
While posting GR for any non-valuated material, I am getting an error "Internal error in FORM/FUNCTION CKML_F_BUILD_INDEX in position 1 with RC 0
Message no. C+099"
Kindly explore the possibilities of solution for the above error. The abve error only showing at the time of posting and not whicle Check.
Regards,
Tushar

Hi Tushar,
Your problem is happening because of the applicaiton of an SAP Note. I think PM has nothing to do with this Error. Pl. read the following (which I read this from one SAP website) & check the relevant SAP notes and take action or write to SAP for solution.
Symptom
The posting of goods receipts results in a long runtime.
Other terms
ACTUPD, MIGO, performance, material ledger
Reason and Prerequisites
The actual costing is active.
The performance problems usually occur when there are several procurement alternatives or procurement processes (tables CKMLMV001 and CKMLMV002) for certain materials.
This can be caused by implementing the modification according to Note 1017470 or 919869, [...]
Regards,
Bala.

ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-10700: preference does not exist: global_lexer ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

database version 11.2.0.4
rac two node
CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
(DESCRIPTION)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('lexer global_lexer language column LANGCODE')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

Like the error message says, you don't have a global_lexer. So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters. Please see the demonstration below, including reproduction of the error and solution.
SCOTT@orcl12c> -- reproduction of problem:
SCOTT@orcl12c> CREATE TABLE actci
2    (description VARCHAR2(60),
3      langcode     VARCHAR2(30))
4 /
Table created.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
SCOTT@orcl12c> -- solution:
SCOTT@orcl12c> DROP INDEX actci_ndx3
2 /
Index dropped.
SCOTT@orcl12c> BEGIN
2    CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
3    CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
4    CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
5 END;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
Index created.

Fatal error distributing forms with Adobe Acrobat 9 Pro

Fatal error distributing forms with Adobe Acrobat 9 Pro.
I click
"Adobe Acrobat Pro/Formularer/Distribuer formularer/"
("Adobe Acrobat Pro/Forms/Distribute forms/")
and chose a form for distribution and in the picture "Distribute Form" chose
"Automatically download & organize responsees with Acrobat.com".
I then click "Next" and write an email-address to send it to (i.g. to my own)
and then click "Send".
The program quickly writes
"Authenticating email-addresses"
and then gives the following error message
"Borland Database er ikke installeret. Kan ikke indlæse tjenesteudbyder af Corel-adressekartotetek."
("Borland Database is not installed. Can not read load service provider of Corel address directory.")
When I clik "OK" I get the error message
"Adobe Acrobat has encountered a problem and needs to close. We are sorry for the inconvenience."
I have undeleted and reinstalled Adobe Acrobat many times without any effect.
The same procedure has been tried on another computer without any problem.
What is my problem and how do I resolve it ?
Operating System Windows XP
Has worked may times before
Same results with other files
No recent system hardware or software change

This is the image that I have plus....
Reader 9.0 AcroRd32.exe caused Microsoft Visual C++ Runtime Library error
Preinstalled Adobe 9 Standard doesn't work on a new Dell out of the box - why would it?
Need help in creating a batch file that will add and remove some registy keys.
%userprofile%

ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine

I am receiving the following error from FME(safe software) when creating a spatial index. I have ruled out several of the common causes as reported in this forum because the procedure works for dataset with 300,000 rows of less but fails with the full dataset of 455,412 rows.
I am using 10G 10.2.0.2.0 - 64bi
Any hints/tips would be much appreciated.
Thanks
Richard
-----Error text follows ----------------------------------------------------------------------------------------
Executing SQL statement `CREATE INDEX CARTO_TEXT_LL_IXS ON CARTO_TEXT_LL(GEOM) INDEXTYPE IS MDSYS.SPATIAL_INDEX' to create spatial index on Oracle table
Executing SQL statement `DROP INDEX CARTO_TEXT_LL_IXS FORCE' to clean up failed spatial index creation
Database Writer: Translation aborted -- rerun specifing "ORACLE8I_2_START_TRANSACTION 227"
Execution of statement `CREATE INDEX CARTO_TEXT_LL_IXS ON CARTO_TEXT_LL(GEOM) INDEXTYPE IS MDSYS.SPATIAL_INDEX' did not succeed; error was `ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-29400: data cartridge error
Error - OCI_NODATA
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10

Thank you both for replies.
The error does ocurr when I try to create the index from SQL, see message text below.
With the spatial index creation disabled in FME the run completes sucessfully, so the data is ok, well thats a maybe.
So I omitted the first 200,000 input rows and ran the last 255,413 rows and the index was sucessfully created (in FME) so now I conclude that the data IS ok (I had previously done a successful run with the first 300,000 rows)
Therefore I am thinking that my database has a problem when it is asked to create a spatial index with the full 455,412 rows. Could this be configuration, a space problem . . . .
Any more suggestions?
Thanks
Richard
=Error when running from SQL =====================================
SQL> CREATE INDEX CARTO_TEXT_LL_IXS ON CARTO_TEXT_LL(GEOM) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX CARTO_TEXT_LL_IXS ON CARTO_TEXT_LL(GEOM) INDEXTYPE IS MDSYS.SPATIAL_INDEX
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-29400: data cartridge error
Error - OCI_NODATA
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
SQL>
=End error message=============================================

Error in form server6i ifweb60

Error in form server6i ifweb60
Hi all
We are using oracle formsserver6i on win2003 server as application server . Usually each ifweb60 gets 18 – 25 MB memory, but Sometimes one or more of them starting to get more and more memory (I've seen 250MB) and then finally we get an Microsoft visual C++ runtime library error window with following text:
Assertion Error in ifweb60.exec
File=e:\994w32\src\if\iff\ifzexe.c
Line: 1183
Exception: hifxc == hifxc_old
Pres Retry to debug application – JIT must be enabled
Is it a application related error or it’s a bug?
Does any body have any workaround this problem?
Thank you in advance.
Alireza
Message was edited by:
areh74

I am with Mediware Information Systems and we have an opening for a Senior Oracle 6i DBA if you know of anyone who has 5 yrs. of Oracle 6i DBA experience. If so, they can send their resume to [email protected] with the subject line 06-029.
Thanks!

Webutil form giving error "oracle.forms.webutil.* bean not found.

i have done all settings as per given in documentation of webutil.
forms is compiling but at runtime it gives error:
oracle.forms.webutil.clientinfo.getclientinfo bean not found.
what could be the reason.plz. help.
shikha...

Hi Shika,
Probably, the issue could be because of any one of the following.
 
 
1. Check whether you have added $OARCLE_HOME\forms90\java\frmwebutil.jar in the default.env under $ORACLE_HOME\Forms90\server folder.
 
 
2. Check whether you have added the virtual directory
<virtual-directory virtual-path="/webutil" real-path="$OARCLE_HOME/forms90/webutil" />
in the file orion-web.xml under $ORACLE_HOME\j2ee\DevSuite\application-deployments\forms\forms90web folder
<bCorrectly
 
 
HTH.
 
Regards,
 
Arun

Webutil error in forms

Hi,
I am using client_host to navigate to the URL on the browser and freeze the form while working on the url and when we close the browser then we should be able to work on the form, for this I used client_host
client_host('C:\Program Files\Internet Explorer\iexplore.EXE http://www.google.com');
I attached webutil.pll library and even I added webutil object group and subclass it to my form. still getting the following error
oracle.forms.webutil.host.Host bean not found. webutil_host.Execute will not work
Is there anything I need to change in configuration file or any of the functions code in webutil pl/sql library? Please let me know I need it immediately.

First, review this: http://blogs.oracle.com/shay/2007/03/02
Any time you get a bean not found error, it will be caused when one of two things is true:
1. The bean is not in or correctly in the form
2. The necessary jar files are not being downloaded to the client (in this case frmwebutil.jar).
So, do the following in exactly the order shown:
1. Close ALL open browsers
2. Open your form in the Builder
3. With the form (Module) selected in the Object Navigator, press Ctrl+Shift+K (this will execute a compile_all)
4. Save the form (Ctrl+S)
5. Generate a new fmx by pressing Ctrl+T (Be sure that you have also generated a webutil.plx file before running)
6. Run the form manually in a browser. Do not use the Builder's "Run form" button. For example, the url will look something like this (use your machine name and port):
http://mymachine:port/forms/frmservlet?form=myForm&config=webutil
Notice the config=webutil at the end. This will cause the form to run using the default WebUtil configuration we (Oracle) provide in the formsweb.cfg.

How to find trace file error in form

hai all,
i have big problem in my form in apps i open the form one error is ocuured,
i got the trace file and check the error,
PARSE ERROR #82:len=2903 dep=0 uid=173 oct=3 lid=173 tim=4265689973879 err=904 this is the trace file error meassage,
how to find this error in form and also this is occured one select statement,how to find this select statement where can be used in form,
i have one button ,when ever i press the button this error is ocuured,i check this button pl/sql procedure code but in this code not using that sql statement,
if any one know to find the sql statement through trace file.
plz give the replay as soon as possible.
thank's

The newest SQL Developer can converts the trace to readable format too, I'm not shure if you see the sql statement related to the error then.
It seems you get ORA-00904 which says you use an invalid coumn in a dml statement.
Normally such error should pop up in message - do you overwrite the message handling or use exception handling in you form which block this message?
Easiest way to find this is to compile the form against the target database.
If this does not give an error, you should check, if you use dynamic sql statements which are wrong.
If you call database routines from your form, than this could be the errro cause too.

Locator Error ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine

I am trying to setup Intermedia Locator and am trying to create the Locator index per the code below. Any ideas why I am getting the below error, and what I can do about it.
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SQL> desc zip_codes
Name Null? Type
ZIPC_ZIP5 NOT NULL VARCHAR2(5)
ZIPC_SDO_GEOMETRY MDSYS.SDO_GEOMETRY
ZIPC_GEOCODE_RESULT MDSYS.GEOCODE_RESULT
SQL> execute geocoder_http.setup_locator_index('zip_codes','zipc_sdo_geometry');
BEGIN geocoder_http.setup_locator_index('zip_codes','zipc_sdo_geometry'); END;
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13224: specified index name is too long for a spatial index
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 7
ORA-06512: at line 1
ORA-06512: at "MDSYS.GEOCODER_HTTP", line 168
ORA-06512: at line 1
Thanks,
Bob Mann

Hi Raju,
There are a few things I would change below.
The first is that optimized rectangles (which you are using) need to be specified as lower left then upper right, assuming the lowest values are in the lower left corner of the coordinate system.
The way you've specified them is upper left, lower right which will not work.
The second thing I would change is your create index statement. You shouldn't be using locater to create the index - locator is a separate product should be used only with point geometries.
Your create index statement should look something like this:
create index zonetemp_sidx on zonetemp(shape)
indextype is mdsys.spatial_index
parameters ('sdo_level=NN');
where NN above is an integer number representing the tiling level you are going to use for the index. This is workload dependent, but I will give you a range of 8-12 to start with - you can protype using real data and figure out what gives you the best performance - if it is 12 you may want to go higher.
Also, you will have had to preload user_sdo_geom_metadata.
Finally, your query looks good, although I would change it slightly to set the third ordinate to NULL rather than 0, i.e.:
SELECT NAME
FROM ZONETEMP A
WHERE SDO_FILTER (A.SHAPE,
MDSYS.SDO_GEOMETRY(2001,null,
MDSYS.SDO_POINT_TYPE(20,20,NULL),
NULL, NULL)),'QUERYTYPE='WINDOW')
='TRUE'
Hope this helps,
dan

Error occurred in the execution of ODCIINDEXCREATE routine

Hi,
We're using oracle 9.2.0.1. I've created a table with a spatial data column. Then inserted some rows and then created a spatial index on that column. What is peculiar is; depending on the number of the rows inserted I receive below error;
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13236: internal error in R-tree processing: [failed to cluster in memory]
ORA-13249: Internal error in Spatial index: [mdrcrclmem]
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
ORA-06512: at line 1
for 2500 records, I can successfully create the index. However, for 3000 records above error happens. What can be the reason and how can I fix it?
Thanks in advance ;-))

Hi,
I've seen this a few times, and it seems to be related to some memory config issues in the database.
Can you try adding this to your create index statement (after dropping the existing index using the FORCE option [drop index <spatial_index_name> force;]):
parameters ('sdo_max_memory=2000000')
We've found it to be helpful, but we haven't been able to isolate the database or OS parameters that lead to the problem.

Error on Forms 9i execution

Similar Messages

Maybe you are looking for