Error on Inst.10-Thrown when the IP address of a host cannot be determined

Hi,
I got this error "Thrown when the IP address of a host cannot be determined" when I was installing the Oracle 10g after make choice "What type of installation do you want?" and press botton Next.
Anybody knows what this error means?
Thanks.

Hi,
Do you mean to say that the system should not be connected to internet when installing. Please reply ASAP.. Thanks a lot.
Ok.. I fix it. Is just start installation without use
the Internet conection. I guess it's because Oracle
is trying use the file host that is in the
C:\WINDOWS\system32\drivers\etc and has within the
content 127.0.0.1 localhost, instead the IP from the
Internet conection. Please, correct me because I
might be wrong.
Thank you very much.

Similar Messages

Error: Thrown when the IP address of a host cannot be determined

hi,
While i install oracle 10g on Windows XP SP2, i got the error "Thrown when the IP address of a host cannot be determined". I am not connected to any network and my host file contains the loopback IP address (127.0.0.1). I don't know why did i get this error. If somebody knows then, please help me as quickly as possible.

Hi.
I can't say I've ever tried to install Oracle on an non-networked PC :(
My first guess would be to add an entry on the hosts file (C:\WINDOWS\system32\drivers\etc\hosts) for the local PC so you have something like:
127.0.0.1 localhost
127.0.0.1 machinenameWhere "machinename" is your machine name :)
This might resolve the issue.
Cheers
Tim...

Error message to be thrown when multiple enteries are not entered

Hello Guys,
I have used a select-options with no intervals in the selection screen.
If the user enters one value in the range, its working.
But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
I used low and high but its not working.
Kindly guide me.

No intervals only works on the main screen. If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic. If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
Something like this:
Select <your field> from <your table> into table <your internal table>
where <your field> IN <your select-options>.
if lines( <your internal table> ) lt 2.
<your error message>.
endif.

Script task error: exception has been thrown by the target of an invocation

Hi,
I have a script task which find the sheet name in an excel and assigned it to variable, this package works perfect while executing using BIDS but when I try to execute it using project deployment it throws the error.
Script task error: exception has been thrown by the target of an invocation

Hi Shoaib,
You use the Microsoft.Office.Interop.Excel namespace in the Script Task, right? If so, please check whether you can find the Microsoft.Office.Interop.Excel.dll in the following folder on the SSIS server:
%ProgramFiles%\Microsoft Visual Studio XX.X\Visual Studio Tools for Office\PIA\OfficeXX
(or %ProgramFiles(x86)%\Microsoft Visual Studio XX.X\Visual Studio Tools for Office\PIA\OfficeXX on 64-bit operating systems)
To install Office primary interop assemblies (PIAs), you can use one of the following methods:
Install the .NET Programmability Support feature when installing Microsoft Office.
Install the
Microsoft Office 2010: Primary Interop Assemblies Redistributable.
Regards,
Mike Yin
TechNet Community Support

Login Error: Exception Has been thrown by the target of an invocation

Hi Guys
When i am trying to Validate the Logic in BPC Admin its giving the the above error.
Login Error: Exception Has been thrown by the target of an invocation
can anyone tell me why.
Thanks
Narsi
Osoft
SA

HI Thanks for u r Reply.
The error is cleared. Just i cleared the System Log in the EventViwer.
THen i refreshed. Then its working fine.
Thanks
Narsi
SAP BPC Consultant
Outlooksoft SA
0027-787082639

I try to run a SSIS 2012 package a come with this error Exception has been thrown by the target of an invocation.

Hi,,
I making a package in SSIS 2012 that read a Excel file and copy the data into a Excel Destination , I did via Scrip Task using VB 2010 (Visual Studio 2010) the package stop with these error, I try to solve but I don't know, any clue ??
Thanks
I execute a SSIS package copy data from a Excel workbook to another using a VB scrip, it show with this error
Exception has been thrown by the target of an invocation. Also appears this : at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes,
RuntimeType typeOwner)   at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)   at System.Reflection.RuntimeMethodInfo.Invoke(Object
obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo
culture)   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
An the package stop , I wan to know really what is happened?, any one please

>Exception has been thrown by the target of an invocation
In your script taks you need to "unwrap" this exception by examining its .InnerException. An easy way is to catch TargetInocationException and re-throw its .InnerException.
David
David http://blogs.msdn.com/b/dbrowne/

[svn:fx-4.0.0] 13468: (commit on behalf of Hans): The following ASyncListView methods now ignore IPEs thrown when the operation is delegated : 'get length()', addItem(), addItemAt(), setItemAt().

Revision: 13468
Revision: 13468
Author:   [email protected]
Date:     2010-01-12 15:59:25 -0800 (Tue, 12 Jan 2010)
Log Message:
(commit on behalf of Hans): The following ASyncListView methods now ignore IPEs thrown when the operation is delegated: 'get length()', addItem(), addItemAt(), setItemAt().
QE notes:
Doc notes:
Bugs: sdk-24975
Reviewer: Alex
Tests run:
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24975
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/collections/AsyncListView.as

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

How do I verify my iCloud account when the email address apple wants to send the instructions to no longer exists?

How do I verify my iCloud account when the email address Apple wants to send the instructions to doesn't exist? I know I need to change the email account associated with iCloud but there doesn't seem to be a way to do so. Any help would be greatly appreciated!!

Did you create an entirely new ID or did you just change the Gmail address to a new email address on your existing ID?

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help?

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help Please?

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

I need to know how to authorize or deauthorize a computer when the email address attached to it no longer exists.

I need to know how to authorize or deauthorize a computer when the email address attached to it no longer exists
I can't access the account because your system doesn't recognize the last password -- and it won't let me change the password because it says the birthday information is wrong -- it's not. There is no help item for that either, so somebody PLEASE tell me how to get around this problem. My music is being held hostage.

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team..

Fireforx cannot find web page when the page address is correct

How do I solve the message that Firefox cannot find the page when the page address is correct?

Do you want to do a Google search instead?
You can check the <b>keyword.enabled</b> on the <b>about:config</b> page and if necessary then you can toggle this pref to true via a double-click.
*https://support.mozilla.org/kb/Location+bar+search
See also:
*http://kb.mozillazine.org/Error_loading_websites

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Adapter: Ralink RT3070 Chipset wifi adapter
Tested: os Windows 8.1 Professional
Hot Spot: 802.11b
The first problem windows 7-8.1 got IP adress and connect he public HotSpot but cannot load login page or any other page. It does not work with it.
The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
On windows XP or linux have a MAC adress Change function allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows need debugging and modernize.The quality of Wi-Fi is now the operating system
is now a thing order which is not good then the operating system is unusable.

Hi,
For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited. To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
bit (locally administered) in the second nibble. Thus possible values for the second nibble are limited to 2, 6, A and E.
In other words
MAC address: “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal. The hexadecimal “Y”, written in binary format, is Y: “kmnp”, where “p” is the least significant bit;
p=0 --> unicast;
p=1 --> multicast;
n=0 --> globally assigned MAC;
n=1 --> locally administered;
So, actually MAC can be changed to any combination in which p=0 and n=1;
“Y” can be 2, 6, A or E.
So the possible MAC addresses in Windows 7 for wireless adapters:
X2-XX-XX-XX-XX-XX
X6-XX-XX-XX-XX-XX
XA-XX-XX-XX-XX-XX
XE-XX-XX-XX-XX-XX
For the wifi hotspot issue, please check this blog to see if it can be helpful.
Windows 7 Connectivity Problems in Public Hotspots
http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
Kate Li
TechNet Community Support

I have an iPod touch but when I tried syncing, it said apps cannot be determined.

I have an iPod touch but when I tried syncing, it said apps cannot be determined. What do i do?

Many developers when they updated their apps fro the newer iOSs dropped support for the older iOSs. That included Skype and other developers. Unless you have a copy of the apps version that was compatible with your iPod/iOS you are out of luck. Do you cave such a copy in a computer file backup??

How to get the MAC address of other hosts in local net

1. Is there any kerner or user function to get the MAC address of other hosts in local net?
2. ire_route_lookup() can only lookup MAC in routing table(arp -a),Is there any way to enable it to find out all MAC of hosts in the local net?
Best Regards
Hann

ChristianEC wrote:
Hi,
I am looking for a way to get the MAC address of a PXI RT controller. I know that there is a VI to do this, but I am looking for a solution for a dll (C-Code).
I use the "Call library node" to call this dll and want to make sure that it is only used on a specific PXI.
Since the VI provides the functionality, I am wondering if it is also available to be called from C-Code?
Thank you,
Christian
If it is available in LabVIEW it is probably available in CVI, which you could then build into a DLL (if there isn't one available already).
CLA, LabVIEW Versions 2010-2013

Error on Inst.10-Thrown when the IP address of a host cannot be determined

Similar Messages

Maybe you are looking for