Error on installing the EM 12c installation on Oracle Linux x86 32bit

Helloo,,
I was trying to install Oracle EM 12c on Linux , when i reach to the step of inserting the password of SYS administator , i pressed next button , then a pop message came, to do a deconfig process, so i did as follows, the the error came
[oracle@localhost bin]$ emca -deconfig dbcontrol db -repos drop -SYS_PWD ***** -SYSMAN_PWD ******
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/assista nts/util/sqlEngine/SQLFatalErrorException
Caused by: java.lang.ClassNotFoundException: oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: oracle.sysman.emcp.EMConfigAssistant. Program will exit.
NOTE: this is on the Virtual Box
Regards,
Smartguy

So ...
After a lot of searches, it was necessary a help from a Weblogic Administrator to find out what was going on with the installation process. The problem was with the memory allocation to the Weblogic VM. The process EMGC_OMS1 could not be started cos it was not possible to create a VM into SERVERADMIN.
With just my DB experience I could not find any logs besides emctl.log and that one that it's shown in OEM Installler interface. The Weblogic Administrator was browsing the HOME where the Weblogic was installed and he found logs that showed the error telling where the problem was. Even downloading the OEM 12c 32bit, it was allocated memory to the java as if it was 64bit. The solution was decreasing the values of memory and clicking in Retry. So, my OEM Cloud Control 12c it's working now.
Regards
Bruno Palma

Similar Messages

  • Error installing OEM 12 in Oracle Linux x86 32bit-Error Starting EMGC_OMS1

    Dear all.
    I've got a issue that I'm not able to figure out what's going on anymore. I'm preparing a new server to be the Oracle Enterprise Manager 12c Server. I've installed Oracle Database 11g Enterprise, 11g Grid Infrastructure, create a database (SID=oem12rep) using +ASM instance to the disks. Now I'm trying to install OEM 12c and when the installer gets 89% done, I'm stuck in Start OMS process. I don't undestand much about Weblogic but when I have a look to the logs I can see the message "Error Starting server EMGC_OMS1: weblogic.nodemanager.NMException: Exception while starting server 'EMGC_OMS1'" and then the process fails with the message "timed out waiting for EMGC_OMS1 to be RUNNING".
    My server:
    Oracle Enterprise Linux 5 Update 7
    Database: Oracle Enterprise Edition 11g
    Grid Infrastructure: 11g
    Could anyone please help me with this issue? The logs I have are:
    OEM Installer log:
    INFO: oracle.sysman.top.oms:Starting OMS ...
    INFO: oracle.sysman.top.oms:Executing command: /u01/app/middleware/oms/bin/emctl start oms
    INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
    INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
    INFO: oracle.sysman.top.oms:Starting WebTier...
    INFO: oracle.sysman.top.oms:WebTier Successfully Started
    INFO: oracle.sysman.top.oms:Starting Oracle Management Server...
    INFO: oracle.sysman.top.oms:Oracle Management Server Could Not Be Started
    INFO: oracle.sysman.top.oms:Oracle Management Server is Down
    INFO: oracle.sysman.top.oms:Please check /u01/app/middleware/gc_inst/em/EMGC_OMS1/sysman/log/emctl.log for error details
    SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
    INFO: oracle.sysman.top.oms:The plug-in Start Oracle Management Service has failed its optional perform method
    INFO: oracle.sysman.top.oms:About to execute plug-in Start Oracle Management Service
    INFO: oracle.sysman.top.oms:The plug-in Start Oracle Management Service is running
    INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.StartOMS
    INFO: oracle.sysman.top.oms:Classpath = /u01/app/middleware/oms/sysman/jlib/omsConfig.jar:/u01/app/middleware/oms/jdbc/lib/ojdbc6.jar:/u01/app/middleware/oms/sysman/jlib/emcore_client.jar:/u01/app/middleware/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/u01/app/middleware/oms/jlib/rcucommon.jar:/u01/app/middleware/oms/jdbc/lib/ojdbc6.jar:/u01/app/middleware/oms/sysman/jlib/emagentSDK.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/u01/app/middleware/oms/jlib/rcu.jar
    INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=9:microstep=0
    INFO: oracle.sysman.top.oms:Fetcing ports from teh static ports file: /u01/app/middleware/.gcinstall_temp/staticports.ini
    INFO: oracle.sysman.top.oms:Starting OMS ...
    INFO: oracle.sysman.top.oms:Executing command: /u01/app/middleware/oms/bin/emctl start oms
    INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
    INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
    INFO: oracle.sysman.top.oms:Starting WebTier...
    INFO: oracle.sysman.top.oms:WebTier Successfully Started
    INFO: oracle.sysman.top.oms:Starting Oracle Management Server...
    INFO: oracle.sysman.top.oms:Oracle Management Server Could Not Be Started
    INFO: oracle.sysman.top.oms:Oracle Management Server is Down
    INFO: oracle.sysman.top.oms:Please check /u01/app/middleware/gc_inst/em/EMGC_OMS1/sysman/log/emctl.log for error details
    SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
    INFO: oracle.sysman.top.oms:The plug-in Start Oracle Management Service has failed its optional perform method
    INFO: oracle.sysman.top.oms:About to execute plug-in Start Oracle Management Service
    INFO: oracle.sysman.top.oms:The plug-in Start Oracle Management Service is running
    INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.oms.StartOMS
    INFO: oracle.sysman.top.oms:Classpath = /u01/app/middleware/oms/sysman/jlib/omsConfig.jar:/u01/app/middleware/oms/jdbc/lib/ojdbc6.jar:/u01/app/middleware/oms/sysman/jlib/emcore_client.jar:/u01/app/middleware/oms/../modules/com.bea.core.apache.log4j_1.2.13.jar:/u01/app/middleware/oms/jlib/rcucommon.jar:/u01/app/middleware/oms/jdbc/lib/ojdbc6.jar:/u01/app/middleware/oms/sysman/jlib/emagentSDK.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.dms_11.1.1/dms.jar:/u01/app/middleware/oms/../oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/u01/app/middleware/oms/jlib/rcu.jar
    INFO: oracle.sysman.top.oms:BaseConfiguration:invoke:Starting BaseConfiguration invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=9:microstep=0
    INFO: oracle.sysman.top.oms:Fetcing ports from teh static ports file: /u01/app/middleware/.gcinstall_temp/staticports.ini
    INFO: oracle.sysman.top.oms:Starting OMS ...
    INFO: oracle.sysman.top.oms:Executing command: /u01/app/middleware/oms/bin/emctl start oms
    INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 12.1.0.1.0
    INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
    INFO: oracle.sysman.top.oms:Starting WebTier...
    INFO: oracle.sysman.top.oms:WebTier Successfully Started
    INFO: oracle.sysman.top.oms:Starting Oracle Management Server...
    INFO: oracle.sysman.top.oms:Oracle Management Server Could Not Be Started
    INFO: oracle.sysman.top.oms:Oracle Management Server is Down
    INFO: oracle.sysman.top.oms:Please check /u01/app/middleware/gc_inst/em/EMGC_OMS1/sysman/log/emctl.log for error details
    SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
    INFO: oracle.sysman.top.oms:The plug-in Start Oracle Management Service has failed its optional perform method
    /u01/app/middleware/gc_inst/em/EMGC_OMS1/sysman/log/
    emctl.log
    2012-03-14 08:38:58,970 [Thread-1] INFO wls.OMSController run.1744 - <OUT>Successfully Connected to Node Manager.
    2012-03-14 08:38:58,971 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of node manager:
    2012-03-14 08:38:58,972 [Thread-1] INFO wls.OMSController run.1744 - <OUT>Currently connected to Node Manager to monitor the domain GCDomain.
    2012-03-14 08:38:58,973 [Thread-1] INFO wls.OMSController run.1744 - <OUT>current status of EMGC_ADMINSERVER:
    2012-03-14 08:38:58,974 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:58,974 [Thread-1] INFO wls.OMSController run.1744 - <OUT>RUNNING
    2012-03-14 08:38:58,975 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:58,975 [Thread-1] INFO wls.OMSController run.1744 - <OUT>current status of EMGC_OMS1:
    2012-03-14 08:38:58,976 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:58,976 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:38:58,977 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:58,977 [Thread-1] INFO wls.OMSController run.1744 - <OUT>Starting server EMGC_OMS1
    2012-03-14 08:38:58,977 [Thread-1] INFO wls.OMSController run.1744 - <OUT>Starting server EMGC_OMS1 ...
    2012-03-14 08:38:59,559 [Thread-1] INFO wls.OMSController run.1744 - <OUT>Error Starting server EMGC_OMS1: weblogic.nodemanager.NMException: Exception while starting server 'EMGC_OMS1'
    2012-03-14 08:38:59,560 [Thread-1] INFO wls.OMSController run.1744 - <OUT>new status of EMGC_OMS1:
    2012-03-14 08:38:59,562 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:59,563 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:38:59,563 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:59,563 [Thread-1] INFO wls.OMSController run.1744 - <OUT>wait until EMGC_OMS1 becomes RUNNING
    2012-03-14 08:38:59,564 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:59,564 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:38:59,565 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:38:59,565 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:39:09,569 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:39:09,571 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:09,571 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:39:09,571 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:09,572 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:39:19,571 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:39:19,573 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:19,573 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:39:19,574 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:19,574 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:39:29,574 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:39:29,575 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:29,576 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:39:29,576 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:29,576 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:39:39,576 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:39:39,577 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:39,583 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:39:39,583 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:39,584 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:39:49,578 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:39:49,580 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:49,580 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:39:49,581 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:49,581 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:39:59,580 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:39:59,582 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:59,583 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:39:59,583 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:39:59,583 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:40:09,583 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:40:09,585 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:09,585 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:40:09,585 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:09,586 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:40:19,585 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:40:19,587 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:19,588 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:40:19,588 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:19,588 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:40:29,588 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:40:29,589 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:29,590 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:40:29,590 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:29,590 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:40:39,590 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:40:39,592 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:39,592 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:40:39,592 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:39,593 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:40:49,592 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:40:49,594 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:49,594 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:40:49,595 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:49,595 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:40:59,594 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:40:59,597 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:59,598 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:40:59,598 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:40:59,598 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:41:09,598 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:41:09,599 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:09,600 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:41:09,600 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:09,600 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:41:19,600 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:41:19,602 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:19,602 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:41:19,603 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:19,603 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:41:29,602 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:41:29,604 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:29,604 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:41:29,605 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:29,605 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:41:39,606 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:41:39,607 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:39,608 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:41:39,608 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:39,609 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:41:49,608 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:41:49,610 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:49,610 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:41:49,610 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:49,611 [Thread-1] INFO wls.OMSController run.1744 - <OUT>sleep for 10 seconds...
    2012-03-14 08:41:59,610 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of EMGC_OMS1:
    2012-03-14 08:41:59,612 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:59,612 [Thread-1] INFO wls.OMSController run.1744 - <OUT>FAILED_NOT_RESTARTABLE
    2012-03-14 08:41:59,613 [Thread-1] INFO wls.OMSController run.1744 - <OUT>
    2012-03-14 08:41:59,613 [Thread-1] INFO wls.OMSController run.1744 - <OUT>timed out waiting for EMGC_OMS1 to be RUNNING
    2012-03-14 08:41:59,613 [Thread-1] INFO wls.OMSController run.1744 - <OUT>status of node manager:
    2012-03-14 08:41:59,614 [Thread-1] INFO wls.OMSController run.1744 - <OUT>Currently connected to Node Manager to monitor the domain GCDomain.
    2012-03-14 08:41:59,614 [Thread-1] INFO wls.OMSController run.1744 - <OUT>1
    2012-03-14 08:41:59,614 [Thread-1] INFO wls.OMSController run.1744 - <OUT>Successfully disconnected from Node Manager.
    2012-03-14 08:41:59,617 [Thread-1] INFO wls.OMSController run.1744 - <OUT>END
    2012-03-14 08:41:59,617 [Thread-2] INFO wls.OMSController run.1744 - <ERR>END
    2012-03-14 08:41:59,713 [main] INFO wls.OMSController processCmd.1392 - wlst process is finished
    2012-03-14 08:41:59,714 [main] INFO wls.OMSController processCmd.1394 - wlst process exited with code 1
    2012-03-14 08:41:59,714 [main] INFO wls.OMSController processCmd.1396 - wlst outstream joined
    2012-03-14 08:41:59,715 [main] INFO wls.OMSController processCmd.1398 - wlst errstream joined
    2012-03-14 08:41:59,715 [main] INFO wls.OMSController processCmd.1406 - process exited with code 1
    2012-03-14 08:41:59,721 [main] DEBUG oms.StatusOMSCmd processStatusOMS.159 - HTTP port in emgc property file: 7203
    2012-03-14 08:41:59,721 [main] DEBUG oms.StatusOMSCmd processStatusOMS.160 - HTTPS port in emgc property file: 7302
    2012-03-14 08:41:59,721 [main] DEBUG oms.StatusOMSCmd processStatusOMS.166 - Webtier HTTP port in emgc property file: 7789
    2012-03-14 08:41:59,722 [main] DEBUG oms.StatusOMSCmd processStatusOMS.167 - Webtier HTTPS port in emgc property file: 7801
    2012-03-14 08:41:59,722 [main] DEBUG oms.StatusOMSCmd processStatusOMS.186 - Using https port.
    2012-03-14 08:41:59,722 [main] DEBUG oms.StatusOMSCmd processStatusOMS.203 - Using webtier https port.
    2012-03-14 08:41:59,972 [main] DEBUG oms.StatusOMSCmd pingOMSCheck.341 - Attempting to connect to https://nsaosv0369:7302/em/faces/logon/core-uifwk-console-login
    2012-03-14 08:42:00,003 [main] INFO oms.StatusOMSCmd processStatusOMS.294 - Failed to connect to em login page
    2012-03-14 08:42:00,004 [main] INFO oms.StatusOMSCmd processStatusOMS.295 - Connection refused
    2012-03-14 08:42:00,004 [main] INFO oms.StatusOMSCmd processStatusOMS.296 - Connection exception when trying to hit OMS page. OMS is down
    2012-03-14 08:42:00,005 [main] INFO wls.OMSController statusOMS.1354 - statusOMS finished with result: 8
    2012-03-14 08:42:00,005 [main] INFO wls.OMSController startOMS.940 - startOMS finished with result: 1
    2012-03-14 08:42:00,007 [main] DEBUG oms.StatusOMSCmd processStatusOMS.159 - HTTP port in emgc property file: 7203
    2012-03-14 08:42:00,007 [main] DEBUG oms.StatusOMSCmd processStatusOMS.160 - HTTPS port in emgc property file: 7302
    2012-03-14 08:42:00,007 [main] DEBUG oms.StatusOMSCmd processStatusOMS.166 - Webtier HTTP port in emgc property file: 7789
    2012-03-14 08:42:00,008 [main] DEBUG oms.StatusOMSCmd processStatusOMS.167 - Webtier HTTPS port in emgc property file: 7801
    2012-03-14 08:42:00,008 [main] DEBUG oms.StatusOMSCmd processStatusOMS.186 - Using https port.
    2012-03-14 08:42:00,009 [main] DEBUG oms.StatusOMSCmd processStatusOMS.203 - Using webtier https port.
    2012-03-14 08:42:00,010 [main] DEBUG oms.StatusOMSCmd pingOMSCheck.341 - Attempting to connect to https://nsaosv0369:7302/em/faces/logon/core-uifwk-console-login
    2012-03-14 08:42:00,011 [main] INFO oms.StatusOMSCmd processStatusOMS.294 - Failed to connect to em login page
    2012-03-14 08:42:00,012 [main] INFO oms.StatusOMSCmd processStatusOMS.295 - Connection refused
    2012-03-14 08:42:00,012 [main] INFO oms.StatusOMSCmd processStatusOMS.296 - Connection exception when trying to hit OMS page. OMS is down
    2012-03-14 08:42:00,044 [main] INFO wls.OMSController statusOMS.1354 - statusOMS finished with result: 8
    Thanks in advance
    Bruno Palma

    So ...
    After a lot of searches, it was necessary a help from a Weblogic Administrator to find out what was going on with the installation process. The problem was with the memory allocation to the Weblogic VM. The process EMGC_OMS1 could not be started cos it was not possible to create a VM into SERVERADMIN.
    With just my DB experience I could not find any logs besides emctl.log and that one that it's shown in OEM Installler interface. The Weblogic Administrator was browsing the HOME where the Weblogic was installed and he found logs that showed the error telling where the problem was. Even downloading the OEM 12c 32bit, it was allocated memory to the java as if it was 64bit. The solution was decreasing the values of memory and clicking in Retry. So, my OEM Cloud Control 12c it's working now.
    Regards
    Bruno Palma

  • [SOLVED] Error while installing the RVL200 Virtual Passage on Debian Linux

    When running the install applet in Firefox on a Debian machine, there is an error:
    File Permissions not set.
    Needed permissions couldn't be set on some files.
    "Root" privileges required for setting permissions.
    This is caused by the /vpclient/linuxconfig.sh script. Its last line is "exit" instead of "exit 0"; this (in my case) returns the exit code of "modprobe -q n_hdlc" which is non-0 (this module is compiled into the kernel). Thus the installer fails for no reason.
    The solution was to modify the script and turn "exit" into "exit 0". It now works perfectly.

    When running the install applet in Firefox on a Debian machine, there is an error:
    File Permissions not set.
    Needed permissions couldn't be set on some files.
    "Root" privileges required for setting permissions.
    This is caused by the /vpclient/linuxconfig.sh script. Its last line is "exit" instead of "exit 0"; this (in my case) returns the exit code of "modprobe -q n_hdlc" which is non-0 (this module is compiled into the kernel). Thus the installer fails for no reason.
    The solution was to modify the script and turn "exit" into "exit 0". It now works perfectly.

  • Error while installing the SAP J2EE add-on for SAP NW XI installation

    Error while installing the SAP J2EE add-on for SAP NW XI installation  
    Posted: Jan 24, 2007 5:23 PM         Reply      E-mail this post 
    Hello,
    When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
    CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
    Could some one help me to resolve this error and install the SAP J2EE add-on?
    Thanks,
    George

    Hi George,
    Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
    Regards
    Vivek

  • Error while installing the NerWeaver Platform

    Error While installing the NetWeaver Instance
    Posted: Nov 22, 2004 2:37 PM        Reply      E-mail this post 
    When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
    MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
    The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
    For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
    Please help me out the error.

    Hi George,
    Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
    Regards
    Vivek

  • Error while installing the Oracle BI 10.1.3.3.1

    Hi ,
    I got the following error while installing 10.1.3.3.1 Oracle BI Suite .
    [nQSError: 46036] Internal Assertion: Condition GetAdaptersinfo( pAdapterinfo.get(), &ulOutBufLen) == NO_ERROR, file .\Config\SUSystemConfig.cpp, line 1297.
    while the installation shows it is completed successfully ..
    but admin tool is not started ....
    even the BI server also is down and says - process terminated unexpectedly ..
    Please help me out in this regards ....

    HI Venkat ..
    THanks for your response ....
    No ..
    The installaion doesnot succeed ....
    Especially the admin tool installation is consistently throwing this error -
    [nQSError: 46036] Internal Assertion: Condition GetAdaptersinfo( pAdapterinfo.get(), &ulOutBufLen) == NO_ERROR, file .\Config\SUSystemConfig.cpp, line 1297.
    The services are runing fine ..
    but I cannot enter to admin tool after installation ....
    It is giving the same error as of installation ...
    any remedies ??
    Thanks and regards ,

  • Error while installing the named instance SQL 2012 Sp1

    Hi,
    I am getting below error while installing the named instance with features Data base engine. on same server box 2 named instance already installed and working...please suggest. i have done a lot of troubleshooting..(configure local system for Db engines
    during installation, tried to install after another domain ID., repair and uninstalled existing and retried.) .. please s if i need to do anything else to resolve the issue.. installation account is domain admin account...
    Can i rename the installation domain account profile from sql server that used for 2 named instance and for 3 rd named instance i am trying... is any impact after profile rename from the local sql server on any instance already configured...
    Shailendra Dev

    thanks alberto.
    here is 
    2015-03-24 19:48:49.42 Server      Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64) 
    Oct 19 2012 13:38:57 
    Copyright (c) Microsoft Corporation
    Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    2015-03-24 19:48:49.42 Server      (c) Microsoft Corporation.
    2015-03-24 19:48:49.42 Server      All rights reserved.
    2015-03-24 19:48:49.42 Server      Server process ID is 3460.
    2015-03-24 19:48:49.42 Server      System Manufacturer: 'Xen', System Model: 'HVM domU'.
    2015-03-24 19:48:49.42 Server      Authentication mode is WINDOWS-ONLY.
    2015-03-24 19:48:49.42 Server      Logging SQL Server messages in file 'D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG'.
    2015-03-24 19:48:49.42 Server      The service account is 'AIRWORKS\scadmin'. This is an informational message; no user action is required.
    2015-03-24 19:48:49.42 Server      Registry startup parameters: 
    -d D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\master.mdf
    -e D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\Log\ERRORLOG
    -l D:\Program Files\Microsoft SQL Server\MSSQL11.SCSMDB\MSSQL\DATA\mastlog.ldf
    2015-03-24 19:48:49.42 Server      Command Line Startup Parameters:
    -s "SCSMDB"
    -m "SqlSetup"
    -T 4022
    -T 4010
    -T 1905
    -T 3701
    -T 8015
    2015-03-24 19:48:49.69 Server      SQL Server detected 1 sockets with 1 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
    no user action is required.
    2015-03-24 19:48:49.69 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2015-03-24 19:48:49.69 Server      Detected 15624 MB of RAM. This is an informational message; no user action is required.
    2015-03-24 19:48:49.69 Server      Using conventional memory in the memory manager.
    2015-03-24 19:48:49.98 Server      Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
    2015-03-24 19:48:50.01 Server      This instance of SQL Server last reported using a process ID of 5124 at 3/24/2015 7:48:48 PM (local) 3/24/2015 2:18:48 PM (UTC). This is an informational message only; no user action is required.
    2015-03-24 19:48:50.03 Server      Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
    only. No user action is required.
    2015-03-24 19:48:50.07 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2015-03-24 19:48:50.30 Server      Database Mirroring Transport is disabled in the endpoint configuration.
    2015-03-24 19:48:50.58 spid5s      Warning ******************
    2015-03-24 19:48:50.65 spid5s      SQL Server started in single-user mode. This an informational message only. No user action is required.
    2015-03-24 19:48:50.66 spid5s      Starting up database 'master'.
    2015-03-24 19:48:50.90 spid5s      9 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:51.04 Server      CLR version v4.0.30319 loaded.
    2015-03-24 19:48:51.17 spid5s      0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:51.17 spid5s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2015-03-24 19:48:51.39 Server      Software Usage Metrics is enabled.
    2015-03-24 19:48:51.81 spid5s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
    2015-03-24 19:48:51.83 Server      Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
    2015-03-24 19:48:51.86 spid5s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
    2015-03-24 19:48:52.02 spid5s      SQL Trace ID 1 was started by login "sa".
    2015-03-24 19:48:52.16 spid5s      Server name is 'AWISCDB\SCSMDB'. This is an informational message only. No user action is required.
    2015-03-24 19:48:52.35 spid12s     The certificate [Cert Hash(sha1) "151C8B90A9A8AF12F5EFAE3439F691E2C01A7355"] was successfully loaded for encryption.
    2015-03-24 19:48:52.35 spid12s     Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SCSMDB ].
    2015-03-24 19:48:52.40 spid12s     Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
    This is an informational message only. No user action is required.
    2015-03-24 19:48:52.43 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: 0x490, state: 16. Failure to register a SPN might cause integrated
    authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
    2015-03-24 19:48:52.45 Server      SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
    message. No user action is required.
    2015-03-24 19:48:54.03 Server      The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service. 
    2015-03-24 19:48:54.03 spid14s     A new instance of the full-text filter daemon host process has been successfully started.
    2015-03-24 19:48:54.86 spid6s      Starting up database 'mssqlsystemresource'.
    2015-03-24 19:48:54.86 spid5s      Starting up database 'msdb'.
    2015-03-24 19:48:54.87 spid6s      The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
    2015-03-24 19:48:55.21 spid5s      12 transactions rolled forward in database 'msdb' (4:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:55.32 spid5s      0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
    2015-03-24 19:48:55.32 spid6s      Starting up database 'model'.
    2015-03-24 19:48:55.32 spid5s      Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
    2015-03-24 19:48:55.72 spid6s      Clearing tempdb database.
    2015-03-24 19:48:57.22 spid6s      Starting up database 'tempdb'.
    2015-03-24 19:48:59.04 spid5s      Database 'master' is upgrading script 'msdb110_upgrade.sql' from level 184551476 to level 184552376.
    2015-03-24 19:48:59.04 spid5s      ----------------------------------
    2015-03-24 19:48:59.04 spid5s      Starting execution of PRE_MSDB.SQL
    2015-03-24 19:48:59.04 spid5s      ----------------------------------
    2015-03-24 19:49:00.23 spid5s      Setting database option COMPATIBILITY_LEVEL to 100 for database 'msdb'.
    2015-03-24 19:49:00.57 spid5s      -----------------------------------------
    2015-03-24 19:49:00.57 spid5s      Starting execution of PRE_SQLAGENT100.SQL
    2015-03-24 19:49:00.57 spid5s      -----------------------------------------
    2015-03-24 19:49:00.61 spid5s      Setting database option COMPATIBILITY_LEVEL to 110 for database 'msdb'.
    2015-03-24 19:49:00.73 spid5s      Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:00.73 spid5s      Configuration option 'allow updates' changed from 1 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:01.78 spid5s      Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
    2015-03-24 19:49:01.79 spid5s      Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
    2015-03-24 19:49:01.80 spid5s      DBCC TRACEOFF 1717, server process ID (SPID) 5. This is an informational message only; no user action is required.
    2015-03-24 19:49:01.80 spid5s      DBCC execution completed. If DBCC printed error messages, contact your system administrator.
    2015-03-24 19:49:01.81 spid5s       
    2015-03-24 19:49:01.81 spid5s      Creating table temp_sysjobschedules
    2015-03-24 19:49:01.91 spid5s       
    2015-03-24 19:49:01.91 spid5s      Alter table sysdownloadlist...
    2015-03-24 19:49:01.92 spid5s       
    2015-03-24 19:49:01.92 spid5s      Alter table sysjobhistory...
    2015-03-24 19:49:01.92 spid5s       
    2015-03-24 19:49:01.92 spid5s      Alter table systargetservers...
    2015-03-24 19:49:01.92 spid5s       
    2015-03-24 19:49:01.92 spid5s      Alter table sysjobsteps...
    2015-03-24 19:49:01.99 spid5s      Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:01.99 spid5s      Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:01.99 spid5s       
    2015-03-24 19:49:01.99 spid5s      -----------------------------------------
    2015-03-24 19:49:01.99 spid5s      Execution of PRE_SQLAGENT100.SQL complete
    2015-03-24 19:49:01.99 spid5s      -----------------------------------------
    2015-03-24 19:49:02.01 spid5s      DMF pre-upgrade steps...
    2015-03-24 19:49:02.13 spid5s      DC pre-upgrade steps...
    2015-03-24 19:49:02.13 spid5s      Check if Data collector config table exists...
    2015-03-24 19:49:02.13 spid5s      Data Collector state before upgrade: 0
    2015-03-24 19:49:02.13 spid5s      pre_dc100::Check if syscollector_collection_sets_internal table exists...
    2015-03-24 19:49:02.13 spid5s      pre_dc100::Capturing Collection set status in temp table...
    2015-03-24 19:49:02.19 spid5s      Deleting cached auto-generated T-SQL Data Collection packages from msdb...
    2015-03-24 19:49:02.19 spid5s      End of DC pre-upgrade steps.
    2015-03-24 19:49:02.19 spid5s      DAC pre-upgrade steps...
    2015-03-24 19:49:02.19 spid5s      Starting DAC pre-upgrade steps ...
    2015-03-24 19:49:02.19 spid5s      End of DAC pre-upgrade steps.
    2015-03-24 19:49:02.19 spid5s      ----------------------------------
    2015-03-24 19:49:02.19 spid5s      Starting execution of MSDB.SQL
    2015-03-24 19:49:02.19 spid5s      ----------------------------------
    2015-03-24 19:49:02.23 spid5s      Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:02.23 spid5s      Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
    2015-03-24 19:49:02.27 spid5s      Checking the size of MSDB...
    2015-03-24 19:49:02.53 spid5s       
    2015-03-24 19:49:02.53 spid5s      Setting database option TRUSTWORTHY to ON for database 'msdb'.
    2015-03-24 19:49:02.53 spid5s      Setting database option RECOVERY to SIMPLE for database 'msdb'.
    2015-03-24 19:49:02.64 spid5s      ----------------------------------
    2015-03-24 19:49:02.64 spid5s      Finished execution of MSDB.SQL
    2015-03-24 19:49:02.64 spid5s      ----------------------------------
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      Starting execution of MSDB_VERSIONING.SQL
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      Finished execution of MSDB_VERSIONING.SQL
    2015-03-24 19:49:02.64 spid5s      -----------------------------------------
    2015-03-24 19:49:02.64 spid5s      Dropping view MSdatatype_mappings...
    2015-03-24 19:49:02.65 spid5s      Dropping view sysdatatypemappings...
    2015-03-24 19:49:02.65 spid5s      Dropping table MSdbms_datatype_mapping...
    2015-03-24 19:49:02.66 spid5s      Dropping table MSdbms_map...
    2015-03-24 19:49:02.67 spid5s      Dropping table MSdbms_datatype...
    2015-03-24 19:49:02.67 spid5s      Dropping table MSdbms...
    2015-03-24 19:49:02.73 spid5s      Creating table MSdbms
    2015-03-24 19:49:02.75 spid5s      Creating table MSdbms_datatype
    2015-03-24 19:49:03.01 spid5s      Creating table MSdbms_map
    2015-03-24 19:49:03.02 spid5s      Creating table MSdbms_datatype_mapping
    2015-03-24 19:49:03.03 spid5s      Definining default datatype mappings
    2015-03-24 19:49:03.04 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE8
    2015-03-24 19:49:03.21 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE9
    2015-03-24 19:49:03.29 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE10
    2015-03-24 19:49:03.37 spid5s      Creating datatype mappings for MSSQLSERVER to ORACLE11
    2015-03-24 19:49:03.46 spid5s      Creating datatype mappings for MSSQLSERVER to DB2
    2015-03-24 19:49:03.54 spid5s      Creating datatype mappings for MSSQLSERVER to SYBASE
    2015-03-24 19:49:03.62 spid5s      Creating datatype mappings for ORACLE8 to MSSQLSERVER
    2015-03-24 19:49:03.71 spid5s      Creating datatype mappings for ORACLE9 to MSSQLSERVER
    2015-03-24 19:49:03.83 spid5s      Creating datatype mappings for ORACLE10 to MSSQLServer
    2015-03-24 19:49:03.95 spid5s      Creating datatype mappings for ORACLE11 to MSSQLServer
    2015-03-24 19:49:04.08 spid5s      Creating view MSdatatype_mappings
    2015-03-24 19:49:04.08 spid5s      Creating view sysdatatypemappings
    2015-03-24 19:49:05.08 spid5s       
    2015-03-24 19:49:05.08 spid5s      Creating table syssubsystems...
    2015-03-24 19:49:05.09 spid5s       
    2015-03-24 19:49:05.09 spid5s      Creating view sysproxyloginsubsystem_view...
    2015-03-24 19:49:05.11 spid5s       
    2015-03-24 19:49:05.11 spid5s      Creating trigger trig_sysoriginatingservers_delete...
    2015-03-24 19:49:05.11 spid5s       
    2015-03-24 19:49:05.11 spid5s      Creating view sysoriginatingservers_view...
    2015-03-24 19:49:05.12 spid5s       
    2015-03-24 19:49:05.12 spid5s      Creating trigger trig_sysjobs_insert_update...
    2015-03-24 19:49:05.13 spid5s       
    2015-03-24 19:49:05.13 spid5s      Creating view sysjobs_view...
    2015-03-24 19:49:05.15 spid5s       
    2015-03-24 19:49:05.15 spid5s      Creating trigger trig_sysschedules_insert_update...
    2015-03-24 19:49:05.16 spid5s       
    2015-03-24 19:49:05.16 spid5s      Creating view sysschedules_localserver_view...
    2015-03-24 19:49:05.21 spid5s       
    2015-03-24 19:49:05.21 spid5s      Creating view systargetservers_view...
    2015-03-24 19:49:05.23 spid5s       
    2015-03-24 19:49:05.23 spid5s      Creating view sysalerts_performance_counters_view...
    2015-03-24 19:49:05.25 spid5s       
    2015-03-24 19:49:05.25 spid5s      Creating function SQLAGENT_SUSER_SNAME ...
    2015-03-24 19:49:05.25 spid5s       
    2015-03-24 19:49:05.25 spid5s      Creating function SQLAGENT_SUSER_SID ...
    2015-03-24 19:49:05.26 spid5s       
    2015-03-24 19:49:05.26 spid5s      Creating procedure SP_SQLAGENT_IS_SRVROLEMEMBER...
    2015-03-24 19:49:05.27 spid5s       
    2015-03-24 19:49:05.27 spid5s      Creating procedure sp_verify_category_identifiers...
    2015-03-24 19:49:05.27 spid5s       
    2015-03-24 19:49:05.27 spid5s      Creating function agent_datetime...
    2015-03-24 19:49:05.27 spid5s       
    2015-03-24 19:49:05.27 spid5s      Creating procedure sp_verify_proxy_identifiers...
    2015-03-24 19:49:05.28 spid5s       
    2015-03-24 19:49:05.28 spid5s      Creating procedure sp_verify_credential_identifiers...
    2015-03-24 19:49:05.29 spid5s       
    2015-03-24 19:49:05.29 spid5s      Creating procedure sp_verify_subsystems...
    2015-03-24 19:49:05.30 spid5s       
    2015-03-24 19:49:05.30 spid5s      Creating procedure sp_verify_subsystem_identifiers...
    2015-03-24 19:49:05.30 spid5s       
    2015-03-24 19:49:05.30 spid5s      Creating procedure sp_verify_login_identifiers...
    2015-03-24 19:49:05.31 spid5s       
    2015-03-24 19:49:05.31 spid5s      Creating procedure sp_verify_proxy...
    2015-03-24 19:49:05.31 spid5s       
    2015-03-24 19:49:05.31 spid5s      Creating procedure sp_add_proxy...
    2015-03-24 19:49:05.32 spid5s       
    2015-03-24 19:49:05.32 spid5s      Creating procedure sp_delete_proxy...
    2015-03-24 19:49:05.32 spid5s       
    2015-03-24 19:49:05.32 spid5s      Creating procedure sp_update_proxy...
    2015-03-24 19:49:05.33 spid5s       
    2015-03-24 19:49:05.33 spid5s      Creating procedure sp_sqlagent_is_member...
    2015-03-24 19:49:05.33 spid5s       
    2015-03-24 19:49:05.33 spid5s      Creating procedure sp_verify_proxy_permissions...
    2015-03-24 19:49:05.34 spid5s       
    2015-03-24 19:49:05.34 spid5s      Creating procedure sp_help_proxy...
    2015-03-24 19:49:05.35 spid5s       
    2015-03-24 19:49:05.35 spid5s      Creating procedure sp_get_proxy_properties...
    2015-03-24 19:49:05.36 spid5s       
    2015-03-24 19:49:05.36 spid5s      Creating procedure sp_grant_proxy_to_subsystem...
    2015-03-24 19:49:05.36 spid5s       
    2015-03-24 19:49:05.36 spid5s      Creating procedure sp_grant_login_to_proxy...
    2015-03-24 19:49:05.37 spid5s       
    2015-03-24 19:49:05.37 spid5s      Creating procedure sp_revoke_login_from_proxy...
    2015-03-24 19:49:05.37 spid5s       
    2015-03-24 19:49:05.37 spid5s      Creating procedure sp_revoke_proxy_from_subsystem...
    2015-03-24 19:49:05.38 spid5s       
    2015-03-24 19:49:05.38 spid5s      Creating procedure sp_enum_proxy_for_subsystem...
    2015-03-24 19:49:05.38 spid5s       
    2015-03-24 19:49:05.38 spid5s      Creating procedure sp_enum_login_for_proxy...
    2015-03-24 19:49:05.39 spid5s       
    2015-03-24 19:49:05.39 spid5s      Creating procedure sp_reassign_proxy...
    2015-03-24 19:49:05.40 spid5s       
    2015-03-24 19:49:05.40 spid5s      Creating procedure sp_sqlagent_get_startup_info...
    2015-03-24 19:49:05.41 spid5s       
    2015-03-24 19:49:05.41 spid5s      Creating procedure sp_sqlagent_update_agent_xps...
    2015-03-24 19:49:05.42 spid5s       
    2015-03-24 19:49:05.42 spid5s      Creating procedure sp_sqlagent_has_server_access...
    2015-03-24 19:49:05.45 spid5s       
    2015-03-24 19:49:05.45 spid5s      Creating procedure sp_sqlagent_get_perf_counters...
    2015-03-24 19:49:05.46 spid5s       
    2015-03-24 19:49:05.46 spid5s      Creating procedure sp_sqlagent_notify...
    2015-03-24 19:49:05.47 spid5s       
    2015-03-24 19:49:05.47 spid5s      Creating procedure sp_is_sqlagent_starting...
    2015-03-24 19:49:05.47 spid5s       
    2015-03-24 19:49:05.47 spid5s      Creating procedure sp_verify_job_identifiers...
    2015-03-24 19:49:05.48 spid5s       
    2015-03-24 19:49:05.48 spid5s      Creating procedure sp_verify_schedule_identifiers...
    2015-03-24 19:49:05.49 spid5s       
    2015-03-24 19:49:05.49 spid5s      Creating procedure sp_verify_jobproc_caller...
    2015-03-24 19:49:05.50 spid5s       
    2015-03-24 19:49:05.50 spid5s      Creating procedure sp_downloaded_row_limiter...
    2015-03-24 19:49:05.51 spid5s       
    2015-03-24 19:49:05.51 spid5s      Creating procedure sp_post_msx_operation...
    2015-03-24 19:49:05.54 spid5s       
    2015-03-24 19:49:05.54 spid5s      Creating procedure sp_verify_performance_condition...
    2015-03-24 19:49:05.58 spid5s       
    2015-03-24 19:49:05.58 spid5s      Creating procedure sp_verify_job_date...
    2015-03-24 19:49:05.59 spid5s       
    2015-03-24 19:49:05.59 spid5s      Creating procedure sp_verify_job_time...
    2015-03-24 19:49:05.61 spid5s       
    2015-03-24 19:49:05.61 spid5s      Creating procedure sp_verify_alert...
    2015-03-24 19:49:05.62 spid5s       
    2015-03-24 19:49:05.62 spid5s      Creating procedure sp_update_alert...
    2015-03-24 19:49:05.63 spid5s       
    2015-03-24 19:49:05.63 spid5s      Creating procedure sp_delete_job_references...
    2015-03-24 19:49:05.65 spid5s       
    2015-03-24 19:49:05.65 spid5s      Creating procedure sp_delete_all_msx_jobs...
    2015-03-24 19:49:05.66 spid5s       
    2015-03-24 19:49:05.66 spid5s      Creating procedure sp_generate_target_server_job_assignment_sql...
    2015-03-24 19:49:05.66 spid5s       
    2015-03-24 19:49:05.66 spid5s      Creating procedure sp_generate_server_description...
    2015-03-24 19:49:05.67 spid5s       
    2015-03-24 19:49:05.67 spid5s      Creating procedure sp_msx_set_account...
    2015-03-24 19:49:05.68 spid5s       
    2015-03-24 19:49:05.68 spid5s      Creating procedure sp_msx_get_account...
    2015-03-24 19:49:05.69 spid5s       
    2015-03-24 19:49:05.69 spid5s      Creating procedure sp_delete_operator...
    2015-03-24 19:49:05.70 spid5s       
    2015-03-24 19:49:05.70 spid5s      Creating procedure sp_msx_defect...
    2015-03-24 19:49:05.71 spid5s       
    2015-03-24 19:49:05.71 spid5s      Creating procedure sp_msx_enlist...
    2015-03-24 19:49:05.72 spid5s       
    2015-03-24 19:49:05.72 spid5s      Creating procedure sp_delete_targetserver...
    2015-03-24 19:49:05.73 spid5s       
    2015-03-24 19:49:05.73 spid5s      Creating procedure sp_enlist_tsx
    2015-03-24 19:49:05.74 spid5s       
    2015-03-24 19:49:05.74 spid5s      Creating procedure sp_get_sqlagent_properties...
    2015-03-24 19:49:05.76 spid5s       
    2015-03-24 19:49:05.76 spid5s      Create procedure sp_set_sqlagent_properties...
    2015-03-24 19:49:05.76 spid5s       
    2015-03-24 19:49:05.76 spid5s      Creating procedure sp_add_targetservergroup...
    2015-03-24 19:49:05.77 spid5s       
    2015-03-24 19:49:05.77 spid5s      Creating procedure sp_update_targetservergroup...
    2015-03-24 19:49:05.78 spid5s       
    2015-03-24 19:49:05.78 spid5s      Creating procedure sp_delete_targetservergroup...
    2015-03-24 19:49:05.78 spid5s       
    2015-03-24 19:49:05.78 spid5s      Creating procedure sp_help_targetservergroup...
    2015-03-24 19:49:05.79 spid5s       
    2015-03-24 19:49:05.79 spid5s      Creating procedure sp_add_targetsvgrp_member...
    2015-03-24 19:49:05.80 spid5s       
    2015-03-24 19:49:05.80 spid5s      Creating procedure sp_delete_targetsvrgrp_member...
    2015-03-24 19:49:05.81 spid5s       
    2015-03-24 19:49:05.81 spid5s      Creating procedure sp_verify_category...
    2015-03-24 19:49:05.81 spid5s       
    2015-03-24 19:49:05.81 spid5s      Creating procedure sp_add_category...
    2015-03-24 19:49:05.82 spid5s       
    2015-03-24 19:49:05.82 spid5s      Creating procedure sp_update_category...
    2015-03-24 19:49:05.83 spid5s       
    2015-03-24 19:49:05.83 spid5s      Creating procedure sp_delete_category...
    2015-03-24 19:49:05.83 spid5s       
    2015-03-24 19:49:05.84 spid5s      Creating procedure sp_help_category...
    2015-03-24 19:49:05.84 spid5s       
    2015-03-24 19:49:05.84 spid5s      Creating procedure sp_help_targetserver...
    2015-03-24 19:49:05.85 spid5s       
    2015-03-24 19:49:05.85 spid5s      Creating procedure sp_resync_targetserver...
    2015-03-24 19:49:06.06 spid5s       
    2015-03-24 19:49:06.06 spid5s      Creating procedure sp_purge_jobhistory...
    2015-03-24 19:49:06.09 spid5s       
    2015-03-24 19:49:06.09 spid5s      Creating procedure sp_help_jobhistory...
    2015-03-24 19:49:06.10 spid5s       
    2015-03-24 19:49:06.10 spid5s      Creating procedure sp_add_jobserver...
    2015-03-24 19:49:06.11 spid5s       
    2015-03-24 19:49:06.11 spid5s      Creating procedure sp_delete_jobserver...
    2015-03-24 19:49:06.11 spid5s      Error: 10011, Severity: 16, State: 1.
    2015-03-24 19:49:06.11 spid5s      Access denied.
    2015-03-24 19:49:06.11 spid5s      Error: 917, Severity: 15, State: 1.
    2015-03-24 19:49:06.11 spid5s      An upgrade script batch failed to execute for database 'master' due to compilation error. Check the previous error message  for the line which caused compilation to fail.
    2015-03-24 19:49:06.11 spid5s      Error: 912, Severity: 21, State: 2.
    2015-03-24 19:49:06.11 spid5s      Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 917, state 1, severity 15. This is a serious error condition which might interfere with regular
    operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective
    actions and re-start the database so that the script upgrade steps run to completion.
    2015-03-24 19:49:06.11 spid5s      Error: 3417, Severity: 21, State: 3.
    2015-03-24 19:49:06.11 spid5s      Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books
    Online.
    2015-03-24 19:49:06.12 spid5s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
    2015-03-24 19:49:06.50 spid12s     The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ MSSQLSvc/AWISCDB.AIRWORKS.IN:SCSMDB ] for the SQL Server service. 
    Shailendra Dev

  • Software update says I need to do the lastest update which I have tried to do at least 6 times. It downloads the software, the computer restarts, it starts to finish the download and then says ' there was an error in installing the software" What is up?

    Software update says I need to download MacOS 10.6.7. Each time I try, I have tried 6 times, the software downloads, it has me restart the system, it then writes the files to disk and then I get an error measage that "there was error in installing the softare. Anybody have this problem and how do you fix it? I am running 10.6.6

    Try this before trying to install the update.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you still have a problem then I suggest you download the 10.6.7 Combo Updater and install it.

  • Runtime Error when installing the German Photoshop trial

    hi,
    when I try to install the German Photoshop trial I get a "Laufzeitfehler: Objekt erwartet Zeile 31" (Runtime Error: object expected line 31) after initialisation of the installation program. When opening the Script Debugger it points to a file main.html in Common Files\Adobe/\Installers\...\resources. The Debugger stops at the line: "body onload="AhmbedGUIWorkflow()" id="standardBody"" (without quotation marks). What can I do to avoid this error and install the trial?
    Thank you for a fast answer.
    Kind regards
    PT

    Well, what browsers do you use and what version of Java? Also do not forget, that it is not advised to have any Java-dependant app open during installs, including browsers or Adobe Media Player. In any case, I would simply uninstall Java (all versions, including all updates), manually clean out all Java caches (Dokumente und Einstellungen/Peregrin/Anwendungsdaten/Sun/Java,Dokumente und Einstellungen/Peregrin/Lokale Einstellungen/Anwendungsdaten/Sun/Java,Dokumente und Einstellungen/All Users/Anwendungsdaten/Sun/Java,Dokumente und Einstellungen/Peregrin/Lokale Einstellungen/Temp), download the latest version and install with a clean slate. This might bring you back on track, as it should set any bent VM settings back to their defaults.
    Mylenium

  • Assert Failer Error while installing the Trial Version

    Hi,
    I am getting the following error while installing the trail version. any help is greatly appreciated. I am also not able to find XCMDOUT.LOG.
    ERROR      2005-01-27 11:59:43 [iaxabactorext.cpp:420]
               CIaSdbActorExt::sdbSessionExecute_impl
    MDB-07001  No action defined for actor.
    ERROR      2005-01-27 11:59:43 [iaxxinscbk.cpp:223]
               abortInstallation
    CJS-00081  Assertion failed: in
    function sdb_inst_enum() {
        var actn = "SDB_INST_ENUM";
        var call_arr = sdb_action_with_info(actn, "75");
        ASSERT(arguments.callee, call_arr != undefined, "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
        ASSERT(arguments.callee, call_arr[0] != "false", "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
        var e_arr;
        e_arr = new Array();
        for (var a_cnt = 1; a_cnt < call_arr.length; a_cnt++) {
            e_arr.push(call_arr[a_cnt]);
        return e_arr;
    ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE

    Hi Lakshmi,
      Were you ever able to resolve the problem?
    -wael

  • Error while installing the BAM Updater Service in Windows

    Hi all,
    I am getting an error while installing the BAM updater service in Windows. When i type the "oraclebpmdatawarehouse install " command in the command prompt it gives error as follows:
    d:\OraBPMEnterpriseHome\bin>oraclebpmwarehouse install
    Installing...
    wrapper | OpenSCManager failed - Access is denied. (0x5)
    Please can anyone tell me how to get rid of this error.
    I have already done everything else like setting the database and other things.
    Thanks.

    From the error message you specified, I guess you are trying to install MS Office SP2 package. If you are then its not MS Office package its just a Service Pack; something like a patch. You need to install a Full Base package first. Again, as mentioned by Rajiv - refer to MS Support

  • Root.sh script at the end of installation of Oracle Clusteware software

    When i run the root.sh script at the end of installation of Oracle Clusteware software i receive the following message:.
    Any ideas on how to fix this?
    ====================================================================
    *[root@rac1 cdata]# /ora_dba/crs/oracle/product/10.2.0/db_1/root.sh*
    WARNING: directory '/ora_dba/crs/oracle/product/10.2.0' is not owned by root
    WARNING: directory '/ora_dba/crs/oracle/product' is not owned by root
    WARNING: directory '/ora_dba/crs/oracle' is not owned by root
    WARNING: directory '/ora_dba/crs' is not owned by root
    WARNING: directory '/ora_dba' is not owned by root
    Checking to see if Oracle CRS stack is already configured
    Setting the permissions on OCR backup directory
    Setting up Network socket directories
    PROT-3: Failed to create export file
    Failed to upgrade Oracle Cluster Registry configuration
    ===================================================================
    OS verssion is :
    Linux rac1.localdomain 2.6.18-194.el5PAE #1 SMP Mon Mar 29 20:19:03 EDT 2010 i686 i686 i386 GNU/Linux ( rhel5 32 bit)
    Cluster verssion =11g
    Vmware
    =================================================================================================
    Log file output ----
    [root@rac1 client]# cat $CRS_HOME/log/rac1/client/ocrconfig_10171.log
    Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
    2010-12-20 13:37:16.649: [ OCRCONF][3086510576]ocrconfig starts...
    2010-12-20 13:37:16.650: [ OCRCONF][3086510576]Upgrading OCR data
    2010-12-20 13:37:16.672: [ OCRCONF][3086510576]OCR already in current version.
    2010-12-20 13:37:16.780: [ OCRCONF][3086510576]Exporting OCR data to [ora_dba/crs/oracle/product/10.2.0/db_1/cdata/crs/ocr10.1.0.2.0]
    2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Error encountered during opening export file [ora_dba/crs/oracle/product/10.2.0/db_1/cdata/crs/ocr10.1.0.2.0] [-1]
    2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Failed to call export OCR (-1)
    2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Failed to make a backup copy of OCR
    2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Exiting [status=failed]...
    =======================
    ./runcluvfy.sh out put :
    [oracle@rac1 clusterware]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "rac1"
    Destination Node Reachable?
    rac2 yes
    rac1 yes
    Result: Node reachability check passed from node "rac1".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    rac2 passed
    rac1 passed
    Result: User equivalence check passed for user "oracle".
    Checking administrative privileges...
    Check: Existence of user "oracle"
    Node Name User Exists Comment
    rac2 yes passed
    rac1 yes passed
    Result: User existence check passed for "oracle".
    Check: Existence of group "oinstall"
    Node Name Status Group ID
    rac2 exists 54321
    rac1 exists 54321
    Result: Group existence check passed for "oinstall".
    Check: Membership of user "oracle" in group "oinstall" [as Primary]
    Node Name User Exists Group Exists User in Group Primary Comment
    rac2 yes yes yes yes passed
    rac1 yes yes yes yes passed
    Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.
    Administrative privileges check passed.
    Checking node connectivity...
    Interface information for node "rac2"
    Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
    eth0 10.10.0.67 10.10.0.0 0.0.0.0 10.10.0.1 00:0C:29:82:EB:64
    eth1 10.10.2.102 10.10.2.0 0.0.0.0 10.10.0.1 00:0C:29:82:EB:6E
    Interface information for node "rac1"
    Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
    eth0 10.10.0.66 10.10.0.0 0.0.0.0 10.10.0.1 00:0C:29:C4:E6:1D
    eth1 10.10.2.101 10.10.2.0 0.0.0.0 10.10.0.1 00:0C:29:C4:E6:27
    Check: Node connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    rac2:eth0 rac1:eth0 yes
    Result: Node connectivity check passed for subnet "10.10.0.0" with node(s) rac2,rac1.
    Check: Node connectivity of subnet "10.10.2.0"
    Source Destination Connected?
    rac2:eth1 rac1:eth1 yes
    Result: Node connectivity check passed for subnet "10.10.2.0" with node(s) rac2,rac1.
    Interfaces found on subnet "10.10.0.0" that are likely candidates for a private interconnect:
    rac2 eth0:10.10.0.67
    rac1 eth0:10.10.0.66
    Interfaces found on subnet "10.10.2.0" that are likely candidates for a private interconnect:
    rac2 eth1:10.10.2.102
    rac1 eth1:10.10.2.101
    WARNING:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check passed.
    Checking system requirements for 'crs'...
    Check: Total memory
    Node Name Available Required Comment
    rac2 1.11GB (1161108KB) 1GB (1048576KB) passed
    rac1 1.09GB (1144852KB) 1GB (1048576KB) passed
    Result: Total memory check passed.
    Check: Free disk space in "/tmp" dir
    Node Name Available Required Comment
    rac2 570.36MB (584044KB) 400MB (409600KB) passed
    rac1 461.97MB (473056KB) 400MB (409600KB) passed
    Result: Free disk space check passed.
    Check: Swap space
    Node Name Available Required Comment
    rac2 2.93GB (3068404KB) 1.5GB (1572864KB) passed
    rac1 2.93GB (3068404KB) 1.5GB (1572864KB) passed
    Result: Swap space check passed.
    Check: System architecture
    Node Name Available Required Comment
    rac2 i686 i686 passed
    rac1 i686 i686 passed
    Result: System architecture check passed.
    Check: Kernel version
    Node Name Available Required Comment
    rac2 2.6.18-194.el5PAE 2.6.9 passed
    rac1 2.6.18-194.el5PAE 2.6.9 passed
    Result: Kernel version check passed.
    Check: Package existence for "make-3.81"
    Node Name Status Comment
    rac2 make-3.81-3.el5 passed
    rac1 make-3.81-3.el5 passed
    Result: Package existence check passed for "make-3.81".
    Check: Package existence for "binutils-2.17.50.0.6"
    Node Name Status Comment
    rac2 binutils-2.17.50.0.6-14.el5 passed
    rac1 binutils-2.17.50.0.6-14.el5 passed
    Result: Package existence check passed for "binutils-2.17.50.0.6".
    Check: Package existence for "gcc-4.1.1"
    Node Name Status Comment
    rac2 gcc-4.1.2-48.el5 passed
    rac1 gcc-4.1.2-48.el5 passed
    Result: Package existence check passed for "gcc-4.1.1".
    Check: Package existence for "libaio-0.3.106"
    Node Name Status Comment
    rac2 libaio-0.3.106-5 passed
    rac1 libaio-0.3.106-5 passed
    Result: Package existence check passed for "libaio-0.3.106".
    Check: Package existence for "libaio-devel-0.3.106"
    Node Name Status Comment
    rac2 libaio-devel-0.3.106-5 passed
    rac1 libaio-devel-0.3.106-5 passed
    Result: Package existence check passed for "libaio-devel-0.3.106".
    Check: Package existence for "libstdc++-4.1.1"
    Node Name Status Comment
    rac2 libstdc++-4.1.2-48.el5 passed
    rac1 libstdc++-4.1.2-48.el5 passed
    Result: Package existence check passed for "libstdc++-4.1.1".
    Check: Package existence for "elfutils-libelf-devel-0.125"
    Node Name Status Comment
    rac2 elfutils-libelf-devel-0.137-3.el5 passed
    rac1 elfutils-libelf-devel-0.137-3.el5 passed
    Result: Package existence check passed for "elfutils-libelf-devel-0.125".
    Check: Package existence for "sysstat-7.0.0"
    Node Name Status Comment
    rac2 sysstat-7.0.2-3.el5 passed
    rac1 sysstat-7.0.2-3.el5 passed
    Result: Package existence check passed for "sysstat-7.0.0".
    Check: Package existence for "compat-libstdc++-33-3.2.3"
    Node Name Status Comment
    rac2 compat-libstdc++-33-3.2.3-61 passed
    rac1 compat-libstdc++-33-3.2.3-61 passed
    Result: Package existence check passed for "compat-libstdc++-33-3.2.3".
    Check: Package existence for "libgcc-4.1.1"
    Node Name Status Comment
    rac2 libgcc-4.1.2-48.el5 passed
    rac1 libgcc-4.1.2-48.el5 passed
    Result: Package existence check passed for "libgcc-4.1.1".
    Check: Package existence for "libstdc++-devel-4.1.1"
    Node Name Status Comment
    rac2 libstdc++-devel-4.1.2-48.el5 passed
    rac1 libstdc++-devel-4.1.2-48.el5 passed
    Result: Package existence check passed for "libstdc++-devel-4.1.1".
    Check: Package existence for "unixODBC-2.2.11"
    Node Name Status Comment
    rac2 unixODBC-2.2.11-7.1 passed
    rac1 unixODBC-2.2.11-7.1 passed
    Result: Package existence check passed for "unixODBC-2.2.11".
    Check: Package existence for "unixODBC-devel-2.2.11"
    Node Name Status Comment
    rac2 unixODBC-devel-2.2.11-7.1 passed
    rac1 unixODBC-devel-2.2.11-7.1 passed
    Result: Package existence check passed for "unixODBC-devel-2.2.11".
    Check: Package existence for "glibc-2.5-12"
    Node Name Status Comment
    rac2 glibc-2.5-49 passed
    rac1 glibc-2.5-49 passed
    Result: Package existence check passed for "glibc-2.5-12".
    Check: Group existence for "dba"
    Node Name Status Comment
    rac2 exists passed
    rac1 exists passed
    Result: Group existence check passed for "dba".
    Check: Group existence for "oinstall"
    Node Name Status Comment
    rac2 exists passed
    rac1 exists passed
    Result: Group existence check passed for "oinstall".
    Check: User existence for "nobody"
    Node Name Status Comment
    rac2 exists passed
    rac1 exists passed
    Result: User existence check passed for "nobody".
    System requirement passed for 'crs'
    Pre-check for cluster services setup was successful.
    =========================================================================
    [root@rac1 client]# ps -ef |grep d.bin
    root 10699 7654 0 13:54 pts/3 00:00:00 grep d.bin
    ===================================================================================
    Many thanks for help

    Thank you Helios . As per oracle we need to contract OS team .
    It's My home system can any one help me to fine root cause ?.
    many thanks .

  • Error while starting the OIM managed server in oracle VM

    Hi ,
    I am getting the following error , while starting the OIM managed server in Oracle VM.
    <Jun 14, 2012 4:45:38 AM EDT> <Error> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <MisfireHandler: Error handling misfires: Unexpected runtime exception: null
    org.quartz.JobPersistenceException: Unexpected runtime exception: null [See nested exception: java.lang.NullPointerException]
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3042)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
    Caused By: java.lang.NullPointerException
    at org.quartz.SimpleTrigger.computeNumTimesFiredBetween(SimpleTrigger.java:800)
    at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigger(JobStoreSupport.java:944)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs(JobStoreSupport.java:898)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3029)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
    at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
    >
    How to resolve this issue.Any one please suggest me , i am in a big trouble ...
    Thanks in advance ..
    -Deena.

    Hi P.k,
    The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
    What is GTC resource?
    OIM version - 11.1.1.5.0.
    -Deena.

  • 11g Release 2 installation on Oracle Linux 6

    Aloha!
    I I'am installing 11g Release 2 Database on Oracle Linux 6 but i stumble on this problem, that i cant install the said application, either I,m running the wrong file or i downloaded the wrong installation kit for OL 6.
    1) I downloaded "Oracle Database 11g Release 2 (11.2.0.1.0) for Linux x86" installer. Extracted it and paste it on Oracle Linux 6 OS.
    2) I access the directory where i paste the said installer and run "runInstaller" file and i'm having a prompt saying "Permission denied".
    Could it be that the installation kit I downloaded is not for Oracle Linux 6. Is there something that I miss thats why I'm having this prompt?
    Thanks in advance.
    Hades,

    Hi Dude,
    I did manage to install OLE 5 and installed successfully 11gR2 on it. I'm on the process of creating an instance on the said database, but i stumble on several errors;
    1. ORA-09925: Unable to create audit trail file
    after clicking OK i will receive this error;
    2. ORA-01017: invalid username/password; log on denied
    and after;
    3. ORA-01012: not logged on
    This prompts appears during the creation on instance. Please refer below for reference.
    [oracle@ole5 ~]$ id
    uid=501(oracle) gid=501(oinstall) groups=501(oinstall),502(dba),503(oper),504(asmadmin)
    [oracle@ole5 ~]$ env|sort
    CLASSPATH=/u01/app/oracle/product/11.2.0/db_1/jlib:/u01/app/oracle/product/11.2.0/db_1/rdbms/jlib
    COLORTERM=gnome-terminal
    DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-AnrEnr2Rfk,guid=64a668470bd8d74af646f6004e0de25b
    DESKTOP_SESSION=default
    DESKTOP_STARTUP_ID=
    DISPLAY=:0.0
    G_BROKEN_FILENAMES=1
    GDMSESSION=default
    GDM_XSERVER_LOCATION=local
    GNOME_DESKTOP_SESSION_ID=Default
    GNOME_KEYRING_SOCKET=/tmp/keyring-IwnPgJ/socket
    GTK_RC_FILES=/etc/gtk/gtkrc:/home/oracle/.gtkrc-1.2-gnome2
    HISTSIZE=1000
    HOME=/home/oracle
    HOSTNAME=ole5.localdomain
    INPUTRC=/etc/inputrc
    LANG=en_US.UTF-8
    LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/lib:/usr/lib
    LESSOPEN=|/usr/bin/lesspipe.sh %s
    LOGNAME=oracle
    LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:.cmd=00;32:.exe=00;32:.com=00;32:.btm=00;32:.bat=00;32:.sh=00;32:.csh=00;32:.tar=00;31:.tgz=00;31:.arj=00;31:.taz=00;31:.lzh=00;31:.zip=00;31:.z=00;31:.Z=00;31:.gz=00;31:.bz2=00;31:.bz=00;31:.tz=00;31:.rpm=00;31:.cpio=00;31:.jpg=00;35:.gif=00;35:.bmp=00;35:.xbm=00;35:.xpm=00;35:.png=00;35:.tif=00;35:
    MAIL=/var/spool/mail/oracle
    ORACLE_BASE=/u01/app/oracle
    ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
    ORACLE_HOSTNAME=ol5-11gr2.localdomain
    ORACLE_SID=DB11G
    ORACLE_UNQNAME=DB11G
    PATH=/u01/app/oracle/product/11.2.0/db_1/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
    PWD=/home/oracle
    SESSION_MANAGER=local/ole5.localdomain:/tmp/.ICE-unix/2727
    SHELL=/bin/bash
    SHLVL=2
    SSH_AGENT_PID=2763
    SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
    SSH_AUTH_SOCK=/tmp/ssh-AUwvgn2727/agent.2727
    TERM=xterm
    TMPDIR=/tmp
    TMP=/tmp
    USERNAME=oracle
    USER=oracle
    _=/usr/bin/env
    WINDOWID=24117329
    XAUTHORITY=/tmp/.gdmZKBUXV
    XMODIFIERS=@im=none
    [oracle@ole5 ~]$
    Thanks in advance.
    With Thanks,
    Hades

  • 32 Bit Installation or Oracle Linux and Oracle Database 10g

    I have an old E-Machine that I wanted to put Oracle Linux and Oracle Database Express 11G on. I was just wanting to do some testing and development on the system. I'm pretty sure the machine is 32bit.
    I just burned a copy of 32 bit Oracle Linux onto a CD. Is there a version of Oracle Database Express that will run on it?
    It seems like there is only a 64 bit version of Oracle Express Database 11g. Is Oracle Database Express 10g installable on Oracle Linux 32 bit?
    Let me know! Thanks in an advance.

    One (or two) caveats with the 10g version, XE can not be patched and the 10.2.0.1 XEs were created before the current daylight savings time rules went into effect.
    If you have access to My Oracle Support there is a method to get updated timezone files for the oracle binaries, you need at least version 4 of the DST files. I've got the MOS docIDs somewhere let us know if needed and I'll dig 'em up.

Maybe you are looking for

  • 2nd Attempt at a Solution

    This is a second posting of this question, in hopes that someone that can help me missed it the first time: I recently had a bad situation with an external HD. The drive "crashed" and was not mountable among other problems. After paying to get the dr

  • PIR Consumption - Sales Order & Service Order

    All - I've come across an issue in our system as it relates to PIR consumption.  We create a PIR forecast which is designed to be consumed by orders.  (MM strategy group 40, PIR consumption indicator 1).  PIR is successfully consumed upon sales order

  • Bring to front InDesign doc CS4 js

    I have a script for Indesign that opens Ps file runs ps script on it and then updates it in InDesign, and leaves Ps as an active program on the front, and I need for InDesign doc. to come forward as an active app. I've tried few lines and none of the

  • Help with setObject!!

    hi, I'm trying to look for a short cut to insert data into the table with preparedstatement. But I've got this problem saying invalid input type or something when I tried to input my data with setObject(1, "x"). The problem is the data I tried to inp

  • Message tells me itunes inproperly installed, to reinstall.  cannot do.  I have windows 7

    message tells me itunes missing "elements"...need to reinstall...unable to do.  Have Windows 7. trying to set up with iphone/clouds/findmyphone