Error on Linux 64 bit "Failed to load LDAP Library: libibmldap.so"

Hi Experts,
Currently i am testing out OBIEE 11g application on Linux (64bit). I am running into the following exception when i try to configure the LDAP authentication provider for authentication. The error message is "Failed to load LDAP Library: libibmldap.so" However i cannot be able to reproduce in this same issue on my windows environment. I am sure this is some lib issue on Linux 64bit. Please advice me in case if i miss out any configuration or in case if you know the work around to resolve this issue.
Thank you
Edited by: user10476276 on Oct 13, 2010 8:47 PM

Hi Srikanth ,
Iam stuck with the same above error configuring LDAP connectivity for OBIEE 11g and I get the same error . I tried following John's blog but I dont see the libibmldap file at all in our linux 64bit set up . Any ideas pls ...
Thanks
Karthik

Similar Messages

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Error date20.dll module failed to load

I just loaded my Palm Desktop software onto a new PC with Vista. When I try to load the Palm Desktop I get this error message: "Error date20.dll module failed to load". Each time this happens, when I try to close this error message box for the 3rd time the Palm desktop finally loads. How can I stop this from happening every time I try to open palm Desktop?
Post relates to: Palm TX

Not sure why I couldn't find this answer in my earlier searches...
But this thread solved it for me:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
Essentially I had to install SSIS on the build machine so that the 64-bit version for
ExecPackageTask.dll, was available. I did this from the original media CD selection Integration Services as a feature.
Hope this helps someone in the future.

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Sybase gateway problem - Failed to load dynamic library 'hsdbsyb'

Having problems getting the Sybase gateway working on XP. Environment in Oracle 9.2.0.6 on Linux, Sybase on AIX 5.1 (moving to linux, gateway currently working well on this box) gateway on XP. I get the following error when trying to use my db link: Help appreciated
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for SYBASE]DRV_InitTdp: DBTYPE.C (473): ; The specified module could not be found.
; at FIND_IMAGE_SYMBOL
DBTYPE.C (7): ; [C079] Failed to load dynamic library 'hsdbsyb'
tnsnames on linux box has:
CIT001TSTW =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = lons00106694)(PORT = 1521))
(CONNECT_DATA =
(SID = cit001tst)
(HS = OK)
on gateway windows box (has oracle client and gateway software and sybase client)
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = c:\progra~1\oracle)
(PROGRAM = extproc)
(SID_DESC=
(SID_NAME = cit001tst)
(ORACLE_HOME = c:\progra~1\oracle)
(PROGRAM = tg4sybs)
initcit001tst.ora
HS_FDS_CONNECT_INFO=CIT1_LON_TST_SQL.cit001tst
HS_FDS_TRACE_LEVEL=ON
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
HS_FDS_TRACE_LEVEL=4
HS_FDS_FILE_NAME=trace
# Environment variables required for Sybase
set SYBASE=c:\progra~1\sybase\oc1251
sql.ini
[CIT1_LON_TST_SQL]
win3_query=WNLWNSCK,loncmxs0004.uk.net.intra.,5000
query=NLWNSCK,loncmxs0004.uk.net.intra.,5000

Yes, this VI is damaged. I can not open it.
Colin
LV7.1/8.2/8.2.1/8.5/8.6/9.0/2010/2013; testing system development
Please Mark the solution as accepted if your problem is solved and donate kudoes
Home--www.colinzhang.net

Failed to load ODBC library symbol: /export/home/odbc/ODBC60/lib/libodbc.so

I've been trying to create a database link from a MySQL database to Oracle using the Oracle dg4odbc gateway. I downloaded and installed DataDirect's ODBC package which includes mysql ODBC library (ddmysql24.so) and a generic ODBC libary (libodbc.so). After creating the DSN in odbc.ini, I tested it and it can connect to the mysql database. Then I created the init{SID}.ora file in hs/admin directory, added dg4odbc lines in the listener.ora, and added lines in tnsnames.ora. Then I tnspinged the new SID with success. Finally, I created the database link. However, when I tried to access the database, I got the ORA-28500 error. In the trace log, I found the following:
Entered hgolofns at 2009/11/01-06:27:20
libname=/export/home/odbc/ODBC60/lib/libodbc.so, funcname=SQLAllocHandle
hoaerr:28500
Exiting hgolofns at 2009/11/01-06:27:20
Failed to load ODBC library symbol: /export/home/odbc/ODBC60/lib/libodbc.so(SQLAllocHandle)
Exiting hgolofn, rc=28500 at 2009/11/01-06:27:20
Exiting hgoinit, rc=28500 at 2009/11/01-06:27:20 with error ptr FILE:hgoinit.c LINE:282 ID:Loading ODBC aray of function ptrs
Entered hgoexit at 2009/11/01-06:27:20
I searched the functions within libodbc.so and found all the SQLAlloc* functions in this library. Why do I still get the error?
Thanks for your help. Jeffrey
Here's the entire trace log:
Oracle Corporation --- SUNDAY NOV 01 2009 06:27:20.637
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "4"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL32UTF8"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
HOSGIP returned value of "FALSE" for HS_FDS_SUPPORT_STATISTICS
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStat
istics"
Exiting hgosdip, rc=0
ORACLE_SID is "MOODLE"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.1.0.6.0_0006, Instance:MOODLE
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=10
HOCXU_DRV_NCHAR=873
HOCXU_DB_CSET=873
HOCXU_SEM_VER=102000
Entered hgolofn at 2009/11/01-06:27:20
HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/export/home/odbc/ODBC60/lib/libodbc.so"
Entered hgolofns at 2009/11/01-06:27:20
libname=/export/home/odbc/ODBC60/lib/libodbc.so, funcname=SQLAllocHandle
hoaerr:28500
Exiting hgolofns at 2009/11/01-06:27:20
Failed to load ODBC library symbol: /export/home/odbc/ODBC60/lib/libodbc.so(SQLAllocHandle)
Exiting hgolofn, rc=28500 at 2009/11/01-06:27:20
Exiting hgoinit, rc=28500 at 2009/11/01-06:27:20 with error ptr FILE:hgoinit.c LINE:282 ID:Loading ODBC aray of function ptrs
Entered hgoexit at 2009/11/01-06:27:20

on which platform did you install DG4ODBC? On a 64bit? In this case did you install the 64bit DD ODBC driver?
What is the output of: file dg4odbc
and: file /export/home/odbc/ODBC60/lib/libodbc.so
can you also please clarify your statement: .. and a generic ODBC libary (libodbc.so). Datadirect ODBC drivers come with their own driver manager ... and you have to use their driver manager with their drivers.

CRIO Fails to Load Shared Library

All,
I'm getting an odd error every other time I tried to load my code onto a cRIO in the dev environment.
Deploying NI_AALPro.lvlib:Linear Fit (LS).viNI_AALPro.lvlib:Linear Fit (LS).vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library lvanlys.*:LinFit_head:C on RT target device.
This VI works the first time, and then fails to run the second time you hit run.
If I reboot the device this corrects the problem, but I have to say this bug costs me quite a lot of time.
Regards,
Ken

xkenneth,
Did that solve your problem? If so, is it reproducible with a small project?
Verne D. // LabVIEW & SignalExpress Product Support Engineer // National Instruments

Failed to load shared library

I am getting a "Failed to load shared library myDLL.dll:myFunction:C on RT Target Device" error when attempting to deploy a VI which contains a call to myDLL on a RT PXI. If I open the VI with the Call Library Function Node and simply reselect myDLL within the Library name or Path box and save the VI, it will then deploy without error. This continues to work until I start changing the VI at which point I attempt to deploy the VI again and get the failed to load error. Once again I open the VI, reselect myDLL, save, and the failed to deploy error goes away.
Does anyone have any ideas about whats going on here?
Thanks in advance
Kevin C.

Hi Bob,
Thanks for responding. I am running LabVIEW 8.5 and running on an 8106 Embedded Controller. Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box. If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue. I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem. Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL. Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
Thanks again,
Kevin C.

Failed to load shared library on RT target device.

I am using 7030 RT target. When I use Call Library Function Node with specified DLL library the application is working properly on Windows target. When I try to download the application on RT target PCI 7030 I get the following error messages: Failed to download useDLL.vi. Failed to load shared library EasyDLL.dll on RT target device. Because the application (attached to the question) is distributed with NI product I would suppose it is written OK. I would like to know what restrictions are imposed on DLL libraries which should be targeted on PCI 7030 RT target. Why the application useDLL.vi with EasyDLL.dll can't be loaded on PCI 7030? Does it mean that Call Library Function Nodes are not compatibel with PCI
7030 target?! Thank you for any explanation.
Attachments:
useDLL.vi ‏15 KB
EasyDLL.dll ‏80 KB

OK I downloaded your files and tried them with a PXI real time controller and the error you mentioned happened for me as well. After digging for awhile, here's the best explanation I could find:
1 - useDLL is calling other DLLs that are failing to download
2 - useDLL is accessing some of the Win API that is not supported by the RT OS.
Read more about this at:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000...
~cheers,
Darin G

RealTime - Failed to load shared library

Hi everyone,
I'm working with the cRIO 9074 system and programmed a ANC application with LabView. Yesterday I tested my application the first time but it didn't work as expected. Because of my testing- and developing-place are different I have to carry the cRIO-System and my laptop between them. So I just disconneted the powersupply and the networkcable. Then 10min later I tried testing again but I got an error. Today in the morning I got the same error like yesterday, which is the following one:
"Failed to load shared library AdaptivFilter. Ensure that the library is present on the RT target. Use MAX [...]"
I reinstalled the NI software (more than once) how I was adviced with MAX but it didn't fix the problem, maybe the AdaptivFilters-library was not included.
In the project-explorer a library called "NI_AdaptivFilter.lvlib" is included and I also found the path of the file on my harddrive.
It drives my nuts that it worked and than 10min later it doesn't.
I hope you could help me, thanks.
Schue
Attachments:
project_explorer.PNG ‏71 KB
Unbenannt.PNG ‏57 KB

Hi Bob,
Thanks for responding. I am running LabVIEW 8.5 and running on an 8106 Embedded Controller. Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box. If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue. I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem. Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL. Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
Thanks again,
Kevin C.

LabVIEW: Failed to load shared library nisysrpc.out

Errored were detected in the target log when connecting to the target:
LabVIEW:Failed to load shared library nisysrpc.out.Ensure that the library is present to the RT target. Use MAX to install NI software or FTP to transfer custom libraries on the target .
labview 2012
sbrio 9636
已解决！
转到解答。
附件:
Shared Library.jpg ‏3797 KB

这个错误是因为RT系统启动部署时缺失库文件或者加载库文件失败导致的。
库文件加载失败原因有很多，而且就算把库文件重新添加进去可能也不能解决问题。建议你重装sbRIO 9636的RT系统，RT重装系统很快，10分钟就能完成。
在MAX里面远程系统下找到你的9636，右键选择格式化。格式化完成后展开9636，右键软件选择更改删除软件，此时把软件再重新装进去就可以了。

Error: The Task has failed to load on Execute Package Task using TFS Build and MSBuild.exe on dedicated Build Machine.

I'm trying to automate my building and deployment of SSIS packages using TFS build definitionss in conjunction with MSBuild.exe on a separate build machine.
I have successfully built and deployed my projects but receive the following error:
Error: Failed to load task "etl_UWP_Stage_tstg_7_Large",type "". The contact information for this task is "Microsoft Corporation: Microsoft SQL Server .... "
This error happens at runtime as well as if I perform a "Validate..." on the SSIS Catalog on the server.
This only occurs when trying to execute a package that contains an Execute Package Task. Any other packages that are doing the actual work are working just fine.
In addition, when I do the MSBuild from my developer machine with the same deployment process everything works fine, even the Execute Package Task.
I can even open up the project on the build machine in VS2012, rebuild all, then deploy and everything works fine.
Some things I've considered/verified:
1) Visual Studio 2012 and Visual Studio Data Tools 2012 are both on the build machine and my local machine.
2) The .NET version being used by VS2012 is the same on the build machine and my local machine.
3) I find it suspicious that the "Type" referenced in the error above is blank...but not sure where to go with that.
4) Obvious difference is that during the TFS Build and Deploy on the build machine, everything is running under the TFS Service account, rather than my account...once again...not sure where to go with this, but it is a significant difference.
Has anyone had similar issues or have any thoughts on things to try?
Thanks,
Jason

Not sure why I couldn't find this answer in my earlier searches...
But this thread solved it for me:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
Essentially I had to install SSIS on the build machine so that the 64-bit version for
ExecPackageTask.dll, was available. I did this from the original media CD selection Integration Services as a feature.
Hope this helps someone in the future.

Error when creating Report: "Failed to load ..../testReport.xdo"

Hi,
I am new to Publisher an have a problem:
I create a new report "TestReport" under "Shared Folders" (or somewhere else, the error does occur in every situation)
After that I clickt the "Edit" button, to define my report.
But at this point I get the message : "Failed to Load ..../TestReport.xdo"
Does anyone know, how to solve this problem?
Thanks
Michael

I found our a bit more, but still have the error.
First of all, I forgot to say that I run publisher under Windows 2003.
And I fount two files "xmlp-server-config.xml" with different content:
- D:\OracleBI\xmlp\XMLP\Admin\Configuration:
<xmlpConfig xmlns="http://xmlns.oracle.com/oxp/xmlp">
<property name="SAW_PASSWORD_ENC" value=xxxx/>
<property name="BI_SERVER_SECURITY_DRIVER" value="oracle.bi.jdbc.AnaJdbcDriver"/>
<property name="SAW_SESSION_TIMEOUT" value="90"/>
<property name="DEBUG_LEVEL" value="exception"/>
<property name="SAW_SERVER" value=xxxxx/>
<property name="SECURITY_MODEL" value="BI_SERVER"/>
<property name="ENABLE_SUPERUSER" value="false"/>
<property name="GUEST_FOLDER" value="false"/>
<property name="SAW_VERSION" value="v4"/>
<property name="SAW_PROTOCOL" value="http"/>
<property name="BI_SERVER_SECURITY_ADMIN_USERNAME" value="Administrator"/>
<property name="BI_SERVER_SECURITY_URL" value="jdbc:oraclebi://xxxx:9703/"/>
<property name="SAW_URL_SUFFIX" value="analytics/saw.dll"/>
<property name="BI_SERVER_SECURITY_ADMIN_PASSWORD_ENC" value=xxxx/>
<property name="SAW_PORT" value="9704"/>
<property name="SAW_USERNAME" value="Administrator"/>
</xmlpConfig>
- D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF:
<xmlpConfig xmlns="http://xmlns.oracle.com/oxp/xmlp">
<resource>
<file path="D:OracleBI/xmlp/XMLP"/>
</resource>
</xmlpConfig>
In the second file I think the "file path" looks very strange for a windows system, but BI Publisher creates it this way.
Anyone have an idea?
I think the problem comes from the path. I also tried to insert "D:\OracleBI\xmlp\XMLP" but it didn't work either...

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

DIM Error when starting Informatica - Failed to load DLL: HASClient.dll

Hi all,
I have Informatica 8.1.1 SP3 installed and I have installed Hyperion DIM adapter for Essbase 11.1.1.
I have followed all the steps given in the installation guide to install the adapters.
But when I open Informatica I am getting the error - Failed to load DLL: HASClient.dll for plug in HASCONNECTOR.
Beacuse of that I am not getting the option to 'Import from Essbase' in Informatica.
Can anyone give any idea what I may have done wrong and how can I make it working.
Thanks..

You need to run through the instructions again. This sounds like an issue with the environment variables not being set correctly.
Look in the [DIM Install PDF|http://download.oracle.com/docs/cd/E17236_01/epm.1112/dim_11111_install.pdf]

Error on Linux 64 bit "Failed to load LDAP Library: libibmldap.so"

Similar Messages

Maybe you are looking for