Error on Micro SD While taking picture. Micro SD Undetected.

Hello this is my first time using a Micro SD, my last phone was Xperia S. While I was taking picture I got an error, my phone does not detect my Micro SD and also my Laptop can't detect it. It's a 32GIG Transcender. My phone is fine but no more Micro SD. 
Anyone knows what to do and how to fix an undetected Micro SD? This is my first time using a Micro SD. 
Thanks! 

I am currently testing the **bleep** out of a 16GB Sony UHS1 40MB/s.
The results are very promising. Heavy file transfers, deleting and recopying. Switching between media (like playing music, then going to movie app and switching straight to movie from SD card while music is playing from SD card). And so far no corruption.
Unfortunately it doesnt rule out 64GB SD problems, but it might. 16GB could be more rugged - perhaps the internals are thicker?? They certainly come much cheaper.
Maybe top end cards only will work without fault.
Not really wanting to spend $100 on an SD card, but I think it could be a solution.
I have seen many stories of top end cards getting roasted, but if mine works, then it works with a high end Sony SD Card.

Similar Messages

  • How to zoom while taking picture in sony ericsson walkman w8

    how to zoom while taking picture in sony ericsson walkman w8

    Hi,
    There is no zoom feature on the XPeria™ w8, however you may be able to install an application from the Android™ market that could add this feature. You can try one called "Vignette".

  • Can we Zoom while taking pictures by the iPhone 3 GS camera?

    Hello Friends,
    I have a very simple query, that I am not being able to get answer to !
    Can we Zoom in while taking pictures by I phone 3GS camera?
    I couldn't find any specification in the User guide about the same.
    Pls reply.
    Thanks a lot !
    regards

    As already provided, the iPhone includes a fixed lens and does not include a digital zoom feature. Although there are some 3rd party apps that provide for a digital zoom, you can accomplish the same with photo viewing/editing software on your computer after importing a photo that was captured by your iPhone.

  • I have a Canon Elura 60. Problem is it zooms in automatically while taking pictures

    My Elura 60 zooms in automatically while taking pictures or reviewing pictures that have already been taken

    Hi boosted!
    Thanks for posting.
    Please make sure the Zoom Lever is centered.  If it is not, try moving it back and forth a few times, leaving it at center.  If it continues to zoom on its own, then the camcorder needs repair.
    The Elura 60 is no longer in service life, so it is no longer serviced by our Factory Service Centers.  However, you have the option to participate in the Canon Loyalty Program instead. 
    The Canon Loyalty Program option allows you to replace your current camcorder for a discounted fee.  The original non-functioning camcorder would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight.  Let them know you have been working with online technical support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camcorder at the time of your call.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Spot on the photos- while taking pictures from Iphone 4s against bright light.

    Hello, 
    I am using the iPhone 4s.. n i have noticed lately that i get a spot on the photos while taking pictures from iphone 4s against light/bright light.  If I take a normal photo with the lens not facing directly to the light, I dont get the spot.  I have attached some of d pics taken by me both against the direct sunlight and one against the night street lights.  Please let me know if this is a minor issue or shall I get it replcaed..
    Appreciate your help in advance.
    Happy New Year 2012.
    Thanks
    Prakash

    There may be something corrupt in your camera roll, or a photo you saved from an email, text message or from the internet preventing them from importing.  You might try transferring them wirelessly to your computer using an app like PhotoSync.  If they transfer successfully, delete them from camera roll then take a new photo and see if iPhoto will import it now.

  • Lumia 800- Red eye coming while taking picture

    Hi friends,
    while taking pictures red eye is coming. 
    Also in darker background picture comes not perfect.
    Please give solution.
    OS version:- 7.10.8773.98
    Firmware:- 1750.0805.8773.12220

    @parag4485
    Look in Windows Marketplace:-
    http://www.windowsphone.com/en-us/store/app/red-eye-fix/197b5b69-dc00-e011-9264-00237de2db9e
    http://www.windowsphone.com/en-us/store/app/red-eye-remover/a93f4a5c-3e5b-49a3-8834-19e2594f18c2
    Happy to have helped forum with a Support Ratio = 42.5

  • How to turn off sound while taking picture

    How to turn off sound while taking picture

    As already provided:
    Flip the Ring/Silent switch. There is no other setting.

  • Purple vertical stripes while taking pictures

    Hello
    I noticed my Iphone 5 (bought online from apple not that long ago) has problems (more and more frequently) with vertical striping when taking pictures, especially in "panorama mode".
    Annoying enough , but when they go purple its horrible.
    Its not been dropped, scraped or anything similar, nor exposed to humid conditions.
    Anyone have any ideas?
    I tried to upload the image on the forum, but didnt seem to work (chrome), couldnt get upload box.
    http://bildr.no/view/1422776
    Its not always, and its not the same part of the screen, just seems random, but also more and more frequent.
    Regards
    Thomas

    Unfortunately, I think you're right. You're looking at a serious hardware issue--the LCD display cable being damaged, the LCD itself being damaged or possibly the graphics chipset on the logic board failing. You're going to have to bring/send the machine in for repair.
    ~Lyssa

  • My iPhone Froze While Taking Pictures Using An App.

    I was taking pictures using a photo editing app named Luminance, and after I took a photo the screen froze.
    The lock button nor the home button works. I can't turn it off either.
    What should I do?

    I've had the same thing happen to me when an app starts to lag, shutting it off will burn it on the screen, not allowing you to enter your passcode for the Iphone. It is frustrating but do as @kb1951 said. It worked for me.

  • Can't zoom while taking pictures

    Hey,
    I have a little problem,
    I can't zoom in or out while I'm taking a picture, and I have no idea why it got blocked,
    can someone help me ?

    with your phone on pull out the battery and then put it back in.

  • What's the best ND filter to buy to get the most shallow depth of field while taking pictures?

    I have a Rebel SL1 by the way.  

    This depends on if you're trying to use flash at the same time.
    Outdoors in full mid-day sun, the exposure based on a "Sunny 16" rule is f/16 and the shutter speed set to the inverse of the ISO speed. At ISO 100 you'd use 1/100th. But if you dial the aperture open 5 stops to f/2.8 then you can dial the shutter faster by 5 stops to 1/3200 and have an equivalent exposure.
    f/2.8 is fairly shallow, but it is not the shallowest... f/2 and f/1.4 are even more shallow. Canon makes 50mm and 85mm f/1.2L (L series lenses) which can create especially shallow depth of field (particularly the 85mm). Canon used to have a 50mm f/1.0 lens but they have not made that in years.
    Depending on your subject... there's a point where the depth of field is so shallow that it's not possible to to get your entire subject into acceptable focus. At f/1.4 and f/1.2 the depth of field can get REALLY thin (especially at close focusing distances.)
    While most of my lenses can handle f/2.8 or better, I often find I prefer f/4 unless I can control subject placement well enough that f/2.8 (or lower) can still work.
    Your SL1 caps out at 1/4000th sec shutter speed. So if you were to shoot in full mid-day sun (a bit of an extreme example) and you wanted to use, say, an f/2 aperture, you could not halve the shutter speed to 1/6400th because your shutter doesn't offer that setting. But you COULD do that with just a single stop ND filter (ND 0.3 -- when represented this way each "0.1" worth of density is equal to 1/3rd of a stop of light. So 0.3 is 3/3rds or 1 full stop.).
    I have a 2 stop (ND 0.6), 3 stop (ND 0.9) and 10 stop (ND 3.0) filters in my bag.
    If you use flash, this changes things... with flash (which I usually use during the day to fill the deep shadows and soften the light) you are capped at the flash sync speed. For your SL1 that's 1/200th sec (or slower) unless you have a speedlite that supports "high speed sync" mode.
    In this situation, you might actually want 4 or 5 stops worth of ND if you are shooting in mid-day sun using fill-flash that doesn't support high-speed sync. You can change the shutter from 1/100th to 1/200th (1 stop) but you'd still have 4 more stops to make up to get from f/16 down to f/2.8... one more stop to get to f/2.
    You can "stack" filters, but stacking increases the odds of artifacts from reflections... use high quality anti-reflective coated filters (this is a situation where it doesn't pay to buy budget filters.)
    The major caution is that there is a point where the shallow depth of field is "too shallow" for the subject.
    Tim Campbell
    5D II, 5D III, 60Da

  • Removing blue cast/tint from JPG (wrong white balance setting while taking picture)

    Hi,
    Photosohop newb here, still using CS3 (10.0), so please be patient.
    I was at a convention not long ago, where I took lots of pictures with my phone. I only noticed at home, that a few of the pictures came out with an intense blue cast because of a bad white balance setting (I must have accidentally changed it).
    I was trying to fix the image for the last 2 hours, with no real luck. I tried everything under Image -> Adjustments -> "Auto Color", "Color Levels" and "Match Color", moving the sliders up and down to get the best match. The best I could come up with was still far away from the other pictures I took the same day.
    Here is one of the bad pictures: http://imgur.com/vw12aTQ
    And here is one I took just a minute later with the "normal" setting: http://imgur.com/RMFm7fo
    I actually got a pretty good match by cutting out some of the cobblestones from both pictures and using "Match Color" -> "Source", but I couldn't apply this technique to the whole picture.
    Could somebody please help me to make the colors of the first picture similar to the second one?
    Thank you,
    Roland

    Here's an easy fix...
    Choose Image - Adjust - Curves, then click the Gray Point dropper and sample something in the image that should be a neutral gray - say one of the stones on the ground.  Click in various places until you like what you see.
    -Noel

  • Blackberry curve 8520 : while taking picture from camera ,trackpad does not zoom in and out

    Hi
         My BB curve 8520 was working fine but I don't know somehow picture's zoom in and zoom out options are disabled that is not working. I have tried by changing picture size to all but still it doesn't show zoom in and zoom out.
              before occuring this problem i can zoom in and out using trackpad.but now i can't.
                    soplease give me solution as early as possible.
    Thanks in advance.

    Have you tried a reboot? With the power turned ON, remove the battery, wait a couple of seconds, then replace battery and allow to boot up

  • Common errors while taking backup.

    Dear All,
    1)what are the comman errors we will face while taking backups.(OR)
    what are the necessary steps we have to take care in  ONLINE  , OFFLINE backup Process.
    2) i have taken a backup sucessfully using BRTOOLS using offile backup
    How to restore it in the new system  Database is ORACLE.
    while file i have to give.
    Regards
    SNB

    Hello ,
    Please refer Note 605062 - FAQ: Restore and recovery.
    Regards ,
    Santosh Karadkar

  • Ora-00604 error while taking tkprof of a trace file

    Sorry i am giving the full erro but omitting exact table names
    Hi ,
    I have an error while taking tkprof of a trace file.
    I gave the following command ---
    tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela explain= /
    error is --
    Error in create table of EXPLAIN PLAN table : unix_session_user.prof$paln_table
    ORA-00604: error occurred at recursive SQL level 1
    ORA-20001: Step-6:DDL
    Event Security. You are not permitted to perform the requested structural
    changes to PROF (TABLE)
    Event triggered : CREATE
    ora_login_user
    (session_user) : unix_session_user(dummy)
    Search : select count(*) from
    tabl(dummy table name) where obj_name like '%\%%' escape '\' and obj_type =
    'TABLE' and obj_type = 'USER' and ( event_CREATE = 'Y' or status =
    'Override')
    ORA-06512: at line 162
    ORA-06510: PL/SQL: unhandled
    user-defined exception
    EXPLAIN PLAN option disabled.
    i searched for the error and in oracle forum i found a solution .. http://forums.oracle.com/forums/thread.jspa?threadID=844287&tstart=0
    but after giving the table option it is giving the same error
    tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=old_schema.plan_table explain= /
    it again gave the same error.
    In both two cases it gives elapsed time results,library cache missing etc but before giving this it throws ORA-00604 error as stated above
    then i again correct the tkprof statement ..
    tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=new_schema.plan_table explain= /
    say this schema name here i used is dummy schema name.
    My question is did this error came as we had not sufficient previlages in the old_schema but that previleges we have in new_schema?
    My databse version is 9.2.0.4.0
    Thanks in advance
    Edited by: bp on Feb 3, 2009 11:36 PM
    Edited by: bp on Feb 3, 2009 11:40 PM

    Please post here full error message, there should be lines with ORA-00604 and then some other ORA as well.
    And are there any trace files generated during this error?
    And as You can see from error description, probably You will have to contact with Oracle support in order to solve this case:
    oerr ora 00604
    00604, 00000, "error occurred at recursive SQL level %s"
    // *Cause:  An error occurred while processing a recursive SQL statement
    // (a statement applying to internal dictionary tables).
    // *Action: If the situation described in the next error on the stack
    // can be corrected, do so; otherwise contact Oracle Support.

Maybe you are looking for