Error on new install

Just installed the BI Publisher desktop. Install appeared to be fine.
Open Word.
Select BI Publisher/Logon
Type in username and password
Type in report server name
get error stating:
"Error while trying to access server location"
"Illegal characters in path"
The server has a dash in it.
Ex: 'Server-Name'
Ideas?

What did you fill in on report server name,
this must be the same url as you go to publisher, so something like:
http://publisherserver:9703/xmlpserver/

Similar Messages

Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
                Abort    Retry     Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name           OEMID Value     OEMTableID Value
APIC                                    ALASKA
A M I
FACP                                   ALASKA
A M I
HPET                                    ALASKA
A M I
MCFG                                 ALASKA
OEMMCFG.
SSDT                                    AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>

Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
          File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned.                                           0
unindexed files recovered.                                       CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
     43468 KB in 21139 indexes.
         0 KB in bad sectors.
    253139 KB in use by the system.
     65536 KB occupied by the log file.
1905048300 KB available on disk.
      4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts.

Program Error in new install w/FontAgent Pro

Just built a new Leopard 10.5.4 system on my new 2008 Mac Pro 8 core, got my CS3 apps installed & activated. Opened up my first file in Photoshop, fooled around a bit & closed it. Everything fine, but the file needed a font that was not installed. So I opened FontAgent Pro & installed the CS3 plugin, reopened Photoshop to see if it would load my font automatically. FAP tried to load the font, but was cut off by the Program Error dialog. Tried a couple more times to open this file, no dice. This is a brand new Mac, virgin Leopard install, 10 GB RAM, no reason I can see for this error. Your suggestions would be most welcome.

Gary,
Just out of curiosity I looked at my Photoshop CS3 Plugin folder and found two FontAgent plugins: FontAgent Pro.plugin and FontAgent Pro Helper.plugin. As my auto activation works without issue I wondered if you had both plugins installed?

EXCHANGE 2013 - ECP AND OWA INTERNAL ERROR 500 - NEW INSTALL

Really hoping someone can help me here.
I first installed 2012 OS and 2013 exchange and users were getting 'Unable to open your default folder' when trying to open outlook. After much googling and nothing working I decided to put 2008 R2 on the server with 2013 Exchange. Now i am running into massive
issues.
Firstly i get Internal Errror 500 after putting in credentials for ECP and OWA. I did notice that it is also defaulting straight to this URL after entering password https://localhost/owa/auth.owa
I check the management shell and that connects without any issues. I also logged on to a computer to see what it did. After autodiscover it is not able to log onto server and then it looks like it is look for the old server information from previous server.
Any help would be appreciated. Can i do another reinstall of OS and how am i meant to remove the previous data that it seems the server has found?

Hi,
According to your description, I understand that cannot login internal ECP\OWA with error 500, also autodiscover failed.
If I misunderstand your concern, please do not hesitate to let me know.
I notice that autodiscover “looks like it is look for the old server information from previous server”, have you installed multiple version Exchange in your environment?
Please run below command to double check the virtual directory configuration:
Get-OutlookAnywhere | FL Identity,*Host*,*Auth*
Get-OwaVirtualDirectory | FL Identity,*url*,*auth*
Get-EcpVirtualDirectory | FL Identity,*url*,*auth*
Get-WebServicesVirtualDirectory | FL Identity,*url*,*auth*
Get-ClientAccessServer | FL Identity,*URI*,*auth*
Then, open IIS and check on the Application Pools to view whether MSExchangeOWAAppPool and MSExchangeECPAppPool is running on .NET Framework v4.0, and recycle virtual directory for test.
Additional, here’s a thread about “Removing Old Exchange and installing a new one”, for your reference:
https://social.technet.microsoft.com/forums/exchange/en-US/46ca107c-7ece-4da7-8aea-46b705793f37/removing-old-exchange-and-installing-a-new-one
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

[SOLVED] Disk full errors on new install despite disk not being full

Hi,
I just installed Arch on my Thinkpad laptop as a way of trying out the distro. I followed the Beginner's Guide quite closely and used the latest install medium. My system is up to date.
However, I did diverge a bit from the beaten path, as I re-used an old LVM-on-LUKS setup from the previous installation (Debian). It took a while to figure out how to make it work, but I managed and yesterday the machine seemed to run fine. Basically, my modifications to the default setup is adding encrypt and lvm to hooks in mkinitcpio.conf, and adding a kernel command line to decrypt my LUKS device containing the LVM volume to /etc/defaults/grub (this was tricky to figure out, by the way, since all documentation I could find spoke of the now-deprecated rc.conf). All that seems to work fine; the computer now boots and mounts root as expected.
However, today when I started the laptop, I noticed that the password dialog in GDM wouldn't load. When I looked into the logs, I found that I had mostly the same problems as described in this thread, but the strange thing is that I'm not low on disk space:
deanna% df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 303565176 17339120 270805848 7% /
dev 953648 0 953648 0% /dev
run 957312 488 956824 1% /run
/dev/mapper/deanna-root 303565176 17339120 270805848 7% /
tmpfs 957312 96 957216 1% /dev/shm
tmpfs 957312 0 957312 0% /sys/fs/cgroup
tmpfs 957312 212 957100 1% /tmp
/dev/sda1 240972 34562 193969 16% /boot
So I thought I'd run into some bug, but then it turned out that systemctl scripts started complaining about lack of disk space, and then I got concerned:
deanna% sudo systemctl start gdm.service
Error: No space left on device
deanna% sudo systemctl status gdm.service
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Thu, 2012-12-20 11:17:03 CET; 41s ago
Main PID: 1964 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├─1964 /usr/sbin/gdm-binary
├─1968 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├─1971 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-ZOCjk8/database -seat se...
├─1981 gdm-session-worker [pam/gdm-launch-environment]
└─2051 gdm-session-worker [pam/gdm-password]
Dec 20 11:17:03 deanna systemd[1]: Starting GNOME Display Manager...
Dec 20 11:17:03 deanna systemd[1]: Started GNOME Display Manager.
Dec 20 11:17:04 deanna gdm-simple-slave[1968]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Dec 20 11:17:17 deanna gdm-password][2051]: AccountsService-WARNING: Failed to monitor logind session changes: No spac...device
deanna%
Any help debugging would be greatly appreciated. Also, I may have missed something since I'm new to Arch. Not a new GNU/Linux user however, so you'd think I'd not manage to blow everything up.
Last edited by albins (2012-12-28 13:56:30)

No:
deanna% df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 290G 17G 259G 7% /
dev 932M 0 932M 0% /dev
run 935M 516K 935M 1% /run
/dev/mapper/deanna-root 290G 17G 259G 7% /
tmpfs 935M 76K 935M 1% /dev/shm
tmpfs 935M 0 935M 0% /sys/fs/cgroup
tmpfs 935M 216K 935M 1% /tmp
/dev/sda1 236M 34M 190M 16% /boot
Also, I just dd:d up a 1.5 GB file from /dev/zero into my home directory without any problems.
Last edited by albins (2012-12-21 08:48:35)

Errors on new installed SOA suite

Hi,
I install SOA suite 10.1.3.1.0 and start it. BPEL Control, ESB Control, Rules Author is accessible, but when click Application Server Control I only get a HTTP 404 error, and Web Services Manager Control login page always prompt "login failure".
what happens? how can i do then? any suggestion?
Peter Wang

Hi Jude,
Find the content of the default-web-site.xml file below:
<?xml version="1.0"?>
<web-site xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/web-site-10_0.xsd" port="8888" display-name="OC4J 10g (10.1.3) Default Web Site" schema-major-version="10" schema-minor-version="0" >
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />
     <web-app application="system" name="dms" root="/dmsoc4j" />
     <web-app application="system" name="JMXSoapAdapter-web" root="/JMXSoapAdapter" />
     <web-app application="default" name="jmsrouter_web" load-on-startup="true" root="/jmsrouter" />
     <web-app application="javasso" name="javasso-web" root="/jsso" />
     <web-app application="ascontrol" name="ascontrol" load-on-startup="true" root="/em" />
     <web-app application="datatags" name="webapp" load-on-startup="true" root="/webapp" />
     <web-app application="orainfra" name="orainfra" load-on-startup="true" root="/orainfra" />
     <web-app application="WSIL-App" name="wsil-ias" load-on-startup="true" root="/inspection.wsil" />
     <web-app application="orabpel" name="httpbinding" load-on-startup="true" root="/httpbinding" />
     <web-app application="orabpel" name="admin" load-on-startup="true" root="/BPELAdmin" />
     <web-app application="orabpel" name="console" load-on-startup="true" root="/BPELConsole" />
     <web-app application="orabpel" name="startup" load-on-startup="true" root="/orabpel" />
     <web-app application="hw_services" name="deploy" load-on-startup="true" root="/integration/services/deploy" />
     <web-app application="hw_services" name="testconnection" load-on-startup="true" root="/integration/services/testconnection" />
     <web-app application="hw_services" name="taskservice" load-on-startup="true" root="/integration/services/TaskService" />
     <web-app application="hw_services" name="taskmetadataservice" load-on-startup="true" root="/integration/services/TaskMetadataService" />
     <web-app application="hw_services" name="taskqueryservice" load-on-startup="true" root="/integration/services/TaskQueryService" />
     <web-app application="hw_services" name="IdentityService" load-on-startup="true" root="/integration/services/IdentityService" />
     <web-app application="hw_services" name="hw_services" load-on-startup="true" root="/integration/services" />
     <web-app application="hw_services" name="worklistxpress" load-on-startup="true" root="/integration/oldworklistapp" />
     <web-app application="hw_services" name="worklistapp" load-on-startup="true" root="/integration/worklistapp" />
     <web-app application="rulehelp" name="rulehelp" load-on-startup="true" root="/ruleauthor/help" />
     <web-app application="ruleauthor" name="ruleauthor" load-on-startup="true" root="/ruleauthor" />
     <web-app application="esb-dt" name="esb_console" load-on-startup="true" root="/esb" />
     <web-app application="esb-rt" name="provider-war" load-on-startup="true" root="/event" />
     <web-app application="gateway" name="gateway" load-on-startup="true" root="/gateway" />
     <web-app application="ccore" name="ccore" load-on-startup="true" root="/ccore" />
     <web-app application="policymanager" name="policymanager" load-on-startup="true" root="/policymanager" />
     <web-app application="coreman" name="coreman" load-on-startup="true" root="/coreman" />
     <access-log path="../log/default-web-access.log" split="day" />
</web-site>

Problem in posting GR due to FY closeing error in new instalation of BPP

Hi Friends ,
I am geting following error when posting GR in new system of development , Please suggest , it was not possible to sort through MMPV .
"Posting only possible in periods 2008/01 and 2007/12 in company code 1000
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed.
When running MMPV it's showing following error .
Mode: Check and close period
Client:100
Period entered (month/year):012008
Incorrect period in control rec. of CoCd 1000; no conversion
The current period (month/year) of the control record is012008
Period closing complete; log issued."
Please help me it's very urgent
Regards
Raghu

Hi,
First check the Current period in OMSY trx...for your Comp code..
Then go to MMPV and enter Comp code, Period & Year
and execute...
Ex: if the current period in OMSY for your Comp code is 01,2008
then you need to enter period 02, 2008 in MMPV trx...
so, that period 01 will be closed & Period 02 will be opened automatically...
You need to close periods one by one like this..
until the period you want use...
Remember you can not Roll back the closed period
Be careful in closing the MM period in PRD client.
Thx
Raju

Team Foundation Server 2013 update 4 New Install - Error 503 Service Unavailable for Sharepoint Central Admin

Hello,
I ran a new install of Team Foundation Server and let it install the built in SharePoint pieces on a single server setup. After the install i'm able to access the
http://teamfoundation:8080/tfs/ address without issue but am unable to create a project. When I attempt to create a project I get the following error:
TF30172: You do not have permission to create a new team project (when checking security i'm a member of the project collection administrators and Team Foundation Administrators)
This led me to look at the sharepoint central administration site where I receive the following error:
Error 503 Service Unavailable
I've gone through and validated the identity is set correctly in IIS for the following services:
SharePoint Central Admin v4
SharePoint15AppPool
The SharePoint Web Services Root is set as LocalService instead of the domain user.
The identity domain user is setup as local administrator on the Team Foundation Server. They are all set to use .net v4.0.30319 with integrated Pipeline mode.
Any help would be great!
Thanks!
Eric

Hi Eric,
Thanks for your post.
Please share your detailed team project creation log here.
In your TFS Admin Console>>Extensions for SharePoint Products tab, ensure SharePoint Web Application shows correctly in the right panel. And go to TFS Admin Console>>Application Tier>>SharePoint Web Applications tab, ensure your SharePoint
web application displays in the right panel, then select your SharePoint web application and click Repair Connection, ensure can repair successfully.
In your IIS Manager, select your SharePoint Central Administration V4 site and click Browser:17012(http) in the right panel, check if your SharePoint Central site can be opened successfully or not. If your SharePoint Central site cannot be accessed, I think
this issue relate to your SharePoint site, you should contact SharePoint experts to resolve this issue first. After you resolved this issue and your SharePoint Central Admin site can be accessed correctly, then try to create your team project(within SharePoint
site) again, if there still has issue when creating team project, please share the detailed error message here, we will try to resolve it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

New install of Crystal 2013 Server; getting errors

New install of Crystal 2013 Server on Windows 2012R2 Server
In the Connectivity Services; the ConnectionServer32 shows a state of Initalizing, and Disabled
In the Crystal Report Services; the CrystalReports2013ProcessingServer shows a state of Running with errors and Disabled
In the Crystal Report Services; the CrystalReports2013ReportApplicationServer shows a state of Stopped and Enabled
Hovering over Stopped I get "The Executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess error + 14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log."
Application Event Log Entry:
Log Name:      Application
Source:        BusinessObjects_cms
Date:          4/21/2014 11:43:12 AM
Event ID:      33017
Task Category: General
Level:        Warning
Keywords:      Classic
User:          N/A
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
Unable to contact server DBHTCRYSTAL01.ConnectionServer32 on machine DBH-TCRYSTAL01.sbcounty.gov to perform status notification. Please check the server's system log for errors.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="BusinessObjects_cms" />
    <EventID Qualifiers="0">33017</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T18:43:12.000000000Z" />
    <EventRecordID>32081</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security />
</System>
<EventData>
    <Data>DBHTCRYSTAL01.ConnectionServer32</Data>
    <Data>DBH-TCRYSTAL01.sbcounty.gov</Data>
</EventData>
</Event>
System Event Log Entry:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          4/21/2014 7:49:07 AM
Event ID:      10016
Task Category: None
Level:        Error
Keywords:      Classic
User:          SYSTEM
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}
and APPID
{AD65A69D-3831-40D7-9629-9B0B50A93843}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T14:49:07.818690400Z" />
    <EventRecordID>8228</EventRecordID>
    <Correlation />
    <Execution ProcessID="668" ThreadID="804" />
    <Channel>System</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="param1">application-specific</Data>
    <Data Name="param2">Local</Data>
    <Data Name="param3">Launch</Data>
    <Data Name="param4">{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}</Data>
    <Data Name="param5">{AD65A69D-3831-40D7-9629-9B0B50A93843}</Data>
    <Data Name="param6">NT AUTHORITY</Data>
    <Data Name="param7">SYSTEM</Data>
    <Data Name="param8">S-1-5-18</Data>
    <Data Name="param9">LocalHost (Using LRPC)</Data>
    <Data Name="param10">Unavailable</Data>
    <Data Name="param11">Unavailable</Data>
</EventData>
</Event>
I also have second Windows 2012R2 Server / Crystal 2013 Server install that is working just fine and the only difference is it is not a member of the Domain.
Barry Streets
[email protected]
510-238-2727 ext 2780

In addition to checklists provided by Josh; I would suggest you to perform a repository scan of the system to identify whether any objects were not installed properly and there might be a possible corruption. Use the link mentioned below to perform repository scanning.
How to use Repository Diagnostic Tool - Business Intelligence (BusinessObjects) - SCN Wiki
You can try to repair the install. Also as this is a new install you can directly go for re-installing the software.
PS: Try to re-download the software from the service market place rather than copying the installer from existing one.

HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
I have windows 8

I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

New Install Error on Windows Vista

On a new install I am getting this error when I try to request license.
I am trying to install it locally on a new Windows Vista machine.
Server Error in '/B1WebTools' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
   netpoint.LicenseRequest.Page_Load(Object sender, EventArgs e) +266
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3074; ASP.NET Version:2.0.50727.3074
Has anyone seen this before?
Edited by: Brett Flake on May 28, 2009 9:31 PM

And how can I uninstall it from a Creative Suite ??
And how can I install then the next full version "directly"??
And I don't really understand.
Adobe Updater cannot install this update, and tries it again after a month, it is downloading this update once in a month, and when it fails, closes itself, and says sorry, see you later in november? And when it fails, I cannot say, please stop bugging me with this.
Almost the same problem with the Adobe Media Player, which cannot play even the files advertised in its own browser, : adobe trainings from adobe related sites, and cannot update itself. It's almost brutal. How does this happen?

An error occurred while attempting to change modules while starting up LR 4.1. New install on a new

An error occurred while attempting to change modules while starting up LR 4.1. New install on a new MBP first time trying to start up

Just a guess, but since everything is new, perhaps you have some sort of permissions problem.
Make sure your user has write access to all the locations mentioned in this link:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
Hal

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem.

Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and the software update itself. The itunes version is 10.3.1

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

New Install Win 2000 Server ORA-12560 : TNS : Protocol Adapter Error

I am trying to learn Oracle.
I get the following when logging into SQL*Plus.
ORA-12560 : TNS : Protocol Adapter Error
I have just installed New Install Win 2000 Server and then Oracle 8i for Win2k
null

Step 1 - from a command line on the database machine, enter 'lsnrctl status' and report the output
Step 2 - display the contents of the %ORACLE_HOME%\network\admin\tnsnames.ora file on the machine running sqlplus.
These are the first two stepo, whether on the database machine or in a traditional client-server configuration.

Error on new install

Similar Messages

Maybe you are looking for