Error on new windows 8.1 project: The type or namespace name 'Foundation' does not exist in the namespace
I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.
I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step.
Similar Messages
-
we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'
App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\). -
I am trying to compile my SharePoint 2010 solution(VS2010) in VS2013 to deploy in SP2013, i have removed all old 14 ref and added 15 ref for microsoft.SharePoint, office.server and other assemblies.
still i am getting "The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint'
(are you missing an assembly reference?)"
did i miss any step here or any version issue?
any suggestions to resolve
Thanks
S.Venkata AppajiHi,
Just confirm that Target Frame work has been changed to 4.5 or not, if not changed it to 4.5 and give it a try. Then also it gives error then check the SP reference, dll properties and check its version(it should be 15.0.).
PS:-You can fine target framework under project properties->Application-> Target Framework.
Regards,
MS -
I am just starting to implement a new user login authentication process wherein after prompting user for username & password, I hope to authenticate them againts our company Active Directory user data. Since I am just starting, I only have very few things
done at this point which is how I wanted to work on this so that my development environment is still at its simplest state.
I am using the following for development:
MS-Visual Studios Professional 2013 Version 12.0.30501.00 Update 2, and
MS .NET Framework Version 4.5.50938.
Here are my project solution's current items:
Web.config:
<?xml version="1.0"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
</system.web>
<system.webServer>
<defaultDocument enabled="true">
<files>
<add value="Login.aspx" />
</files>
</defaultDocument>
</system.webServer>
</configuration>
Web.Debug.config:
<?xml version="1.0" encoding="utf-8"?>
<!-- For more information on using web.config transformation visit http://go.microsoft.com/fwlink/?LinkId=125889 -->
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
<!--
In the example below, the "SetAttributes" transform will change the value of
"connectionString" to use "ReleaseSQLServer" only when the "Match" locator
finds an attribute "name" that has a value of "MyDB".
<connectionStrings>
<add name="MyDB"
connectionString="Data Source=ReleaseSQLServer;Initial Catalog=MyReleaseDB;Integrated Security=True"
xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
</connectionStrings>
-->
<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />
<!--
In the example below, the "Replace" transform will replace the entire
<customErrors> section of your web.config file.
Note that because there is only one customErrors section under the
<system.web> node, there is no need to use the "xdt:Locator" attribute.
<customErrors defaultRedirect="GenericError.htm"
mode="RemoteOnly" xdt:Transform="Replace">
<error statusCode="500" redirect="InternalError.htm"/>
</customErrors>
-->
</system.web>
</configuration>
Web.Assemblies.config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="false" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<assemblies>
<add assembly="System.DirectoryServices, Version=4.0.0.0, Culture=neutral PublicKeyToken=b03f5f7f11d50a3a"/>
</assemblies>
</system.web>
</configuration>
Login.aspx:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="Login" %>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div id="loginForm" style="height: 562px; width: 399px; margin-left: 0px" title="Login Form">
<asp:Label ID="loginPageLabel" runat="server" Font-Bold="True" Font-Names="Arial Black" Font-Size="Large" Text="Please Log In"></asp:Label>
<br />
<br />
<asp:Label ID="loginUsernameLabel" runat="server" Text="Username:"></asp:Label>
<asp:TextBox ID="loginUserNameTextBox" runat="server" OnTextChanged="loginUserNameTextBox_TextChanged" Width="213px" Wrap="False" AutoPostBack="True" TabIndex="1"></asp:TextBox>
<br />
<br />
<asp:Label ID="loginPasswordLabel" runat="server" Text="Password:"></asp:Label>
<asp:TextBox ID="loginPasswordTextBox" runat="server" OnTextChanged="loginPasswordTextBox_TextChanged" Width="212px" Wrap="False" AutoPostBack="True" TabIndex="2"></asp:TextBox>
<br />
<br />
<asp:RadioButton ID="loginUAradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginUAradioButton_CheckedChanged" Text="TUPSS Associate" AutoPostBack="True" TabIndex="3" />
<asp:RadioButton ID="loginAFradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginAFradioButton_CheckedChanged" Text="Area Franchisee" AutoPostBack="True" TabIndex="4" />
<br />
<br />
<br />
<asp:Button ID="loginSubmitButton" runat="server" Font-Bold="True" OnClick="loginSubmitButton_Click" Text="Log In" TabIndex="5" />
<asp:Button ID="loginCancelButton" runat="server" Font-Bold="True" OnClick="loginCancelButton_Click" Text="Cancel" TabIndex="6" />
<br />
<br />
<asp:Label ID="loginStatusInstructionLabel" runat="server" Text="Status/Instruction:"></asp:Label>
<br />
<asp:TextBox ID="loginStatusInstructionTextBox" runat="server" Height="230px" MaxLength="100" Rows="12" TextMode="MultiLine" Width="360px" EnableViewState="False" OnTextChanged="loginStatusInstructionTextBox_TextChanged" ReadOnly="True" TabIndex="-1"></asp:TextBox>
</div>
</form>
</body>
</html>
Login.aspx.cs:
using System;
using System.DirectoryServices;
public partial class Login : System.Web.UI.Page
private string uName; // user-entered username
private string pWord; // user-entered password
private int loginLoadCycles; // just keeping track of how many times Page_Load is called
protected void Page_Load(object sender, EventArgs e)
if (this.loginUserNameTextBox.Text == String.Empty &&
this.loginPasswordTextBox.Text == String.Empty &&
this.loginUAradioButton.Checked == false &&
this.loginAFradioButton.Checked == false)
this.loginInit();
this.setLoginVisibilityAndFocus();
this.loginLoadCycles += 1;
private void loginInit()
this.uName = String.Empty;
this.pWord = String.Empty;
this.loginLoadCycles = 0;
private void setLoginVisibilityAndFocus()
// Decide on whether or not the Login submit & cancel buttons should be enabled or not
if ( this.loginUserNameTextBox.Text == String.Empty ||
(this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false) )
this.loginSubmitButton.Enabled = false;
this.loginCancelButton.Enabled = false;
this.loginStatusInstructionTextBox.Text = "Please specify if you are a TUPSS Associate or an Area Franchisee by checking either the 'TUPSS Associate' or 'Area Franchisee' checkbox.";
else
this.loginSubmitButton.Enabled = true;
this.loginCancelButton.Enabled = true;
if (this.loginPasswordTextBox.Text == String.Empty)
this.loginStatusInstructionTextBox.Text = "Now that you have entered your username & type, please enter your password.";
else
this.loginStatusInstructionTextBox.Text = "When you are ready, please select either the Log In button to login, or the Cancel button to abort.";
if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false)
this.SetFocus(this.loginUAradioButton);
else if (this.loginUserNameTextBox.Text == String.Empty)
this.SetFocus(this.loginUserNameTextBox);
else if (this.loginPasswordTextBox.Text == String.Empty)
this.SetFocus(this.loginPasswordTextBox);
else
this.SetFocus(this.loginSubmitButton);
protected void loginUserNameTextBox_TextChanged(object sender, EventArgs e)
protected void loginPasswordTextBox_TextChanged(object sender, EventArgs e)
// For some reason, after specifying that the password entry box's textmode to 'Password' setting,
// the UI's password textbox is emptied
this.loginStatusInstructionTextBox.Text = "NOTICE:\nThis application is still under development.\n\n" +
"This is why the password you entered is visible. Once this portion of the application is ready, it will be masked.\n\n" +
"Also, still need to figure out why when changing this to Password entry mode to mask its entered data, password is getting reset.";
protected void loginSubmitButton_Click(object sender, EventArgs e)
this.loginLoadCycles = 0;
this.uName = this.loginUserNameTextBox.Text;
this.pWord = this.loginPasswordTextBox.Text;
if (this.loginUAradioButton.Checked == true && this.loginAFradioButton.Checked == false)
this.loginLADPauthenticate('U'); // authenticate UPS Associates against UPS Corp's Active Directory
else if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == true)
this.loginLADPauthenticate('A'); // authenticate Area Franchisees against UPS Store's iNet Active Directory
else
// set colors to show that this is an error instead of a status message or instruction
this.loginStatusInstructionTextBox.Text = "ERROR: Cannot log in without specifying if you are an UPS Associate or an Area Franchisee!";
protected void loginCancelButton_Click(object sender, EventArgs e)
this.loginStatusInstructionTextBox.Text = "You have selected to cancel from logging in...";
// Still need to plan what to do when user cancels out of logging in. For now, just initialize class attributes
this.loginInit();
protected void loginUAradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginUAradioButton.Checked == true)
this.loginAFradioButton.Checked = false;
msg = "Thanks for specifying that you are a TUPSS Associate. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
protected void loginAFradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginAFradioButton.Checked == true)
this.loginUAradioButton.Checked = false;
msg = "Thanks for specifying that you are an Area Franchisee. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
private void loginLADPauthenticate(char whichActiveDirectory)
String msg = "Authenticating user '" + this.uName + "' with password '" + this.pWord + "' against ";
if (whichActiveDirectory == 'U')
msg += "UPS Corp's Active Directory...";
else if (whichActiveDirectory == 'A')
msg += "The UPS Store's Franchisee Active Directory...";
msg += "\n\nNOTICE:\nThis is still under development.\n\nAt this point, this application is supposed to do something else now but is not yet ready.";
this.loginStatusInstructionTextBox.Text = msg;
this.loginStatusInstructionTextBox.AutoPostBack = true;
// Authenticate using LDAP
protected void loginStatusInstructionTextBox_TextChanged(object sender, EventArgs e)
I confirmed that I have System.DirectoryServices.dll located in
C:\Windows\Microsoft.NET\assembly\GAC_MSIL\v4.0_4.0.0.0__b03f5f7f11d50a3a\ folder and that I as well as System have read as well as read&execute privileges
not only to all folders in its path but also to the DLL file itself.
I would appreciate any help in trying to resolve this compilation error so that I can proceed with implementing LDAP features for this endeavor.
Thanks so much,
hguico @ The UPS StoreHi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later. -
I have a Windows app that was built some 7 years ago on a WinXP machine using VS2005. It uses Crystal Reports for the reporting. We recently got new machines with Win7 x64 and I installed VS 2013 Pro. I moved the app to my machine and upgraded
it to that VS version. It previously had a .NET Framework target of version 2.0. I changed the target to version 4.5.
I want to use the MS Reporting instead of Crystal Reports. However, I cannot get the ReportViewer control to show up in the Toolbox.
I downloaded and installed the ReportViewer Runtime 2012. I installed the ReportViewer using the NuGen GUI and console. I tried adding the control to the Toolbox using Tools > Choose Toolbox Items... but it never shows up after I browse to
the Microsoft.ReportViewer.WinForms.dll file and select it. I manually typed 'Microsoft.Reporting.WinForms.ReportViewer' and the intellisense came up fine. But when I build the project I get the error shown in this post's title.
I'm at a complete loss. I've searched all over and tried everything I can find on the subject with no luck.
Can anybody help?
Thanks.Thank you for taking the time.
The Report Viewer will not appear on the Toolbox, even with references to that assembly. However the Crystal Reports viewer IS in the Toolbox.
I think it may be because Crystal Reports is installed and integrated? I don't know. I just can't get it to work.
Thanks again.
Hello,
From
ReportViewer Controls (Visual Studio), we could get that ReportViewer Controls are included in VS2013, that means we don't need to install that control manually.
To confirm whether this issue is related to your Visual Studio or Crystal Reports, I would recommend you consider testing it with the following ways.
1. Create a simple windows form application, and open a form designer window, and check whether reportviewer is inside the tool box.
If it is available, then we could focus on your project to narrow down this issue.
If it is still missing, we could test it with #2.
2. Uninstall Crystal Reports and disable all add-ins of VS2013, and if possible, you could also uninstall and reinstall VS2013 to make sure the environment is clean enough. Next repeat the steps of #1.
It will be much helpful if you could share the detailed results with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The type or namespace name 'Microsoft' does not exist in the namespace 'System'
I got the reference error while building the code.
I have added the system and microsoft.sharepoint reference error. But still showing the same error.
Need help!Hi
According to the error message, please check that whether the target version of the .NET Framework of your application has been changed.
Please do as follows:
1. Make sure your project is target on .NET 3.5 .
2. Add
the namespace in your code.(using Microsoft.Office.InfoPath)
More information about
Troubleshooting .NET Framework Targeting Errors:
http://msdn.microsoft.com/en-us/library/vstudio/cc668079(v=vs.100).aspx
A sample about
Creating a Basic Form Template with Code for your reference:
http://msdn.microsoft.com/en-us/library/aa942693(v=office.14).aspx
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support -
Hi,
am trying to use simple client object model using console application and have Included the required assembly
microsoft.sharepoint.client
microsoft.sharepoint.client.runtime
and added using directive microsoft.sharepoint.client
then also am getting the error plese help me
thanx in advanceHi,
From the properties of the project solution, change the platform target to x64, and the target framework to .NET Framework 3.5.
Let me know if you have any doubt. -
Hi Folks,
I created SharePoint reusable deigner work flow which has just 2 state approval process.
I generated the wsp file with save template option and I successfully imported it into visual studio 2010 I just removed List from the tag and put my custom content type id
<Association Categories>List<Association Categories>
when I build the solution I got erro which mention in the title.
Thanks in advance.....Hi Shivaprasad,
Check .net version in your project properties, If it isset to .net 2.0, change it to .net version to 3.0 and it should work.
Let me know if it works or not..
Nilesh -
Build Error : The name "LocalizedStrings" does not exist in the namespace
I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes
it shows the following error
The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
Since it is bound, i need to build it, only then the text is visible :(
Any suggestions?
Alfah
AlfahishamThis is the declaration for the LocalizedStrings.cs
namespace LoveCycles_Free
public class LocalizedStrings
public LocalizedStrings()
private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
public LoveCycles_Free.AppResources LocalizedResources
get
return localizedResources;
And this is my App.xaml
<Application
x:Class="LoveCycles_Free.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >
<!--Application Resources-->
<Application.Resources>
<local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
<FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
<FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
<FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
<Style x:Key="AnimatedButtons" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<Style x:Key="AddButton" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
<Application.ApplicationLifetimeObjects>
<!--Required object that handles lifetime events for the application-->
<shell:PhoneApplicationService
Launching="Application_Launching" Closing="Application_Closing"
Activated="Application_Activated" Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
Alfahisham -
Error in script task "The name 'file' does not exist in the current context"
I am new to the c# scripting and SSIS come from PHP and Foxpro.
I am using SSIS with a script task and I am getting am errror "The name 'file' does not exist in the current context" in the following code in the picture below: (See
Why does the object named "file" go away after the first refrence to it?? How do I make it avaliable for the whole script??
public void Main()
String cFileInfo = null;
DateTime dFTPFileDateTime;
bool fireAgain = true;
List<IRemoteFileInfo> fileList = (List<IRemoteFileInfo>)Dts.Variables["SFTPResult"].Value;
foreach (IRemoteFileInfo file in fileList)
cFileInfo = file.Name + "|" +file.ModifiedTime +"|"+ file.Size;
Dts.Events.FireInformation(1, "Name ", cFileInfo, "", 0, ref fireAgain);
dFTPFileDateTime =
file.ModifiedTime;
<< This is where the error is occuring.
Dts.TaskResult = (int)ScriptResults.Success;I think you forgot { and } after the loop... Or is that deliberately?
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter -
When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.
Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen -
The name "Folder" does not exist in the namespace
I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks HalDid you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. -
The name "XYZ" does not exist in the namespace
I was getting error "The name “XYZ” does not exist in the namespace " at here
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>
How to solve?
namespace DictionaryApp.Model
public class VisiableConverter : IValueConverter
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object Convert(
object value,
Type targetType,
object parameter,
CultureInfo culture)
bool visibility = (bool)value;
return visibility ? Visibility.Visible : Visibility.Collapsed;
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object ConvertBack(
object value,
Type targetType,
object parameter,
CultureInfo culture)
Visibility visibility = (Visibility)value;
return (visibility == Visibility.Visible);
Next, add the converter in the UserControl's resources. In m
y simple project, I had to create this section - but hopefully you're already using this in your real apps!
You may also need to add an xmlns attribute in page.xaml for your project's namespace.
x:Class="DictionaryApp.PageDictionary"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:DictionaryApp"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:ms="using:DictionaryApp.Model"
mc:Ignorable="d">
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>I think the not implemented exceptions could be causing the issue. I would implement this functions also
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
and
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException(); -
Azure - The name 'model' does not exist in the current context
I am getting the error below but only on Azure, everything builds and runs fine on multiple machines running locally. But when I deploy to Azure I get the error below trying to login. Not even sure where to start researching this one
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0103: The name 'model' does not exist in the current context
Source Error:
Line 1: @model Web.Models.LoginViewModelhi,
From the error message, it seems like a MVC issue.
I suggest you could re-configure your web configuration follow those solutions The name 'model' does not exist in current context in MVC3
and
Razor View throwing “The name 'model' does not exist in the current context” .
And then you could try to deploy project to azure again. I think this error may be disappeared. Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
i was in firefox doing something and i got a message stating that i needed to update firefox to 28 so l clicked and installed it. well it also installed a freaking yahoo annoying tool bar that i cannot delete. its not in my installed programs so i ca
-
Can I still get updates if I have not bought into the Cloud?
-
File deliverable concern in FTP
Hi All, We have a scenario where we sending the files to FTP with comma delimeted. Now requirement saying that : There is a another file (called .cksum) should write no.of records , filesize, filename in 2nd file based onfirst file(File1.txt) records
-
Steps to start build in Integration Directory
Hi Everyone, I just wanted to start the build in ID for a simple scenario to start with i.e. File to File. Please help me with the steps of starting with screenshots (if & only if possible) or else only steps would be fine. Thanks in Advance, Regards
-
Can iPhoto events be converted en masse into individual albums in Photos?
So far as I can tell, the new Photos software does not allow photos to be organized into events, as in iPhoto. It seems that albums could serve the same purpose, though I may have that wrong too. If I'm going to be making albums now out of what I u