Error on opening file

Hi All,
I am beginer, sorry for stupid question
I saved a flash file from the internet by the program "Save
Flash" the extention is swf.
Now when I try to open the file a get an error message in
Output tub :
"Error opening URL 'file://filename and path/undefined"
Can someone please help.
Thanks
Shaul

how are you trying to "open" the file?

Similar Messages

Upgrade Plug-ins error (Cannot Open File)

I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
Cannot Open File
IMAGE.RPLN
IMAGE FILTERS.RPLN
HYPERLINKS.RPLN
"Cannot open "Masters_book dec.indd".
Please upgrade your plug-ins to their latest
versions, or upgrade to the latest version of
Adobe InDesign."
I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

I probably shouldn't dwell, on this, but I can get really worked up over it.
I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
(You can imagine how well these conversations with Adobe Support go...)
Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
(*) Yes, I know, this incident would not have been "today." Consider it time dilation.

Execute ABAP Program - Error in Open File Cust_Dim.dat

HI All,
I am trying to Implement scenario of Data Service designer for Extract SAP Application data (page no. 181 Onwards). It is for transfer data from SAP ECC - KNA1 to MSSQL table.
I have Data Service server install on my system.
I have implement all the steps. When I execute job server. I am getting error like
"Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/ZCUSTDIM_1.aba> error < Open File Error -- C:\Program Files\Business Objects\/Cust_Dim.dat>"
Does anyone knows about this? I have tried to find lot in SDN but didn't find any solution.
Thanks
Ratnakar

Hi all
I was having the exact same problem as the one explained here.
I was a little mixed up because I assigned full privileges on the destination folder to one specific account called installsap
I used this account for installing SAP BO Data Services. This account is the one configured on the Business Objects Data Services Service:
However, I kept getting the same error, as if this account had not enough privileges over the folder.
I saw that there is another Service called Server Intelligent Agent. I went through its configuration Properties by using the Central Configuration Manager, specifically within the Log On As Property and it seemed like a non specific System Account was configured there.
Then I open the services.msc (Windows application) in order to see this very same service configuration and it had NOTHING specified there, nor a Local System Account nor an specific user account.
So, I stopped the service and specified the installsap account I used for the Business Objects Data Services Service. After that I verified I could see this configuration through the Central Configuration Manager and now both tools showed the same.
Then I started the SIA Service retried again executing the ABAP Data Flow and the Error in Open File was gone.
It is how the SIA Service configuration looks like.
By the way, I am not sure if the "Job Server Service" which was cited before in this thread is the same as the Server Intelligence Agent Service I modified
Besides, although I've been using DS for quite a considerable amount of time, I have never heard of such "Job Server Service". Let me know if I am wrong.
Anyways it worked for me and I hope it works for someone else who faces the same error.
Best regards!

What does the error message "Opening file in iCloud(state=5) mean?

I have been ushing iCloud to backup my data for Ascendo DataVault for my iPhone 5 (iOS 7.0.4) and original iPad (iOS 5.1.1) very successfully for some time. Both devices are synchronized with my PC using Wi-Fi. The DataVault data on my PC is also synchronized on my wife's iPhone 5 (iOS 7.0.4) and iPad Mini (iOS 7.0.4). Recently, every attempt to synchronize my iPhone or iPad with my iCloud results in the error message "Opening file in iCloud(state=5)," but my wife's iPhone and iPad continue to synchronize with her iCloud without any problems. What does this error message mean, and is there a cure for the problem?

OK found a solution!
It is really lame!
NEVER add a reminder in iCal dragging them into the Week or Day view!!!
Change to Month view and then drag the reminder on the desired day!
You can now change to Week or Day view and move the reminder to the selected hours.
Please help share this solution and click like to get Apple to finally fix this issue, which is clearly on their side.
Thank you

Error " ulimit: open files: cannot modify limit: Invalid argument" when open a terminal window

Every time I open a terminal (bash), it shows error " ulimit: open files: cannot modify limit: Invalid argument". I googled it but did not find the solution that works. My OS is 10.8.2. I followed the instruction here http://wordpress.org/support/topic/upgraded-to-php-530-on-mac-now-no-database-co nnection but it doesn't work.(basically, I just commented some lines in that file). Can anyone help?

Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Copy and paste the following line into the text box that opens:
mkdir disabled_shell_files; mv .profile .bash* $_
Your old shell initialization and history files will be saved in a directory with the indicated name at the top level of your home directory. Test.

Flash CS5 ِAn error occurred opening file and WinRar The archive is either in unknown format or damaged

I have fla files and when I opened by flash cs5 11.5.1 it says "An error occurred opening file". I tried sure to make it rar or zip and repair it. When I opened by WinRar it says "The archive is either in unknown format or damaged"
Please Please Please Help ME !!!!! .. I have been done a lot of work on it .. I am so tired .. Please Help Me Please
Thank you so much

do you have a working swf?
if so, you can decompile it and recover some or all your work.
if not, are you able to rename the fla to a rar and then unrar it?

System Check error : Actual open files limit:7000, needed 8000 nodes:

Hi,
System check showing up error 'Actual open files limit:7000, needed 8000 nodes:' in our BIA system.
SAP BIA Admin guide suggested open files limit should not be less than 8000. I verified at OS level
ulimit for open files (-n) is displayed as '8000' which is good.
Please suggest me how to fix this error. What if we increase ulimit value for open files at OS level?
Thanks in advance
Regards,
Srinivas.

Hello Srinivas,
please see SAP Note <a href="http://service.sap.com/sap/support/notes/1273695">1273695</a>.
Regards,
Marc
SAP Customer Solution Adoption (CSA)

Cics eventQueue Error - Error in Opening file SYS2.CICS.OCL1012.DEF.NOS.ICS

How can fix this error.
trace ---> onConnect()
trace ---> onBind (BPRM_CICS_EVENT)
eventQueue: trace ---> onBind()
eventQueue: trace ---> onBind NOS name is BPRM_CICS_EVENT
Error in Opening file SYS2.CICS.OCL1012.DEF.NOS.ICSEVENT
[N001] Can't open bprm_cics_event object store.
Failed openning adapter NOS BPRM_CICS_EVENT
acxdisp (2007-03-15T10:55:14.486144): connect --> rc=0

"An error occured opening file".

Hello, I am using flash cs 6 on Win 7, i was working on a project and my machine got shutdown due to lights, now i am getting error "An error occured opening file". Can anybody please help me to recover this file?

There is a way to try to recover it, and it may work. That is to take the couurpt .fla file, rename the ".fla" extension to ".rar" and open it in winrar. (When doing this, at some point yo will get a warning saying "this could damage the file", you can safely ignore this message.) Next, you open the file with winrar, and under one of the drop-dwon menus you have the opition that says "fix". click that. It'll load for a second then say "fix successful". Take the new .rar file that was just made, rename it back to the.fla extention, and try to open it in flash.
I've read where people said it worked, but it never did for me (mine has gotten corrupt twice)

Loadjava Error while opening file: –resolve Exception java.io.FileNotFound

Dears,
I'm having Oracle 11gr2 on Windows 2008r2. I have very strange issue while trying to load ordinary Java source. I get error that loadjava can't open file. I'm using the following command in loading:
%ORACLE_HOME%\dbhome_1\BIN\loadjava -thin -user ORAMQ/***@localhost:1521:DEVAR -verbose -fileout %C:\temp\loadjava-9-MQReasonCodeResolver.java.log C:\src\MQReasonCodeResolver.java –resolve-----
I got the following error in the verbose file out:
arguments: '-user' 'ORAMQ/***@localhost:1521:DEVAR' '-thin' '-verbose' '-fileout' 'C:\temp\loadjava-9-MQReasonCodeResolver.java.log' 'C:\src\MQReasonCodeResolver.java' '–resolve'
creating : source MQReasonCodeResolver
loading : source MQReasonCodeResolver
Error while opening file: –resolve
    Exception java.io.FileNotFoundException: –resolve (The system cannot find the file specified)
creating : –resolve
The following operations failed
     –resolve: opening file-----
The code is very simple and doesn't have any issue:
import java.lang.reflect.Field;
public class MQReasonCodeResolver
    public MQReasonCodeResolver()
    public static final String MQ_EXCEPTION_CLASS = "com.ibm.mq.MQException";
    public static final String RC_FIELD_PREFIX = "MQRC_";
    public static final String RC_VALUE_FIELD = "reasonCode";
    public static String resolve( Exception mqex )
        if ( !canResolve( mqex ) )
            return mqex.getClass().toString() + mqex.getMessage();
        Class class1 = mqex.getClass();
        try
            Field field = class1.getField( RC_VALUE_FIELD );
            Object key = field.get( mqex );
            Field[] fields = class1.getFields();
            for ( int i = 0; i < fields.length; i++ )
                Field ff = fields;
String name = ff.getName();
if ( name.startsWith( RC_FIELD_PREFIX ) && ff.get( null ).equals( key ) )
return mqex.getMessage() + " " + name;
catch ( Exception ex )
return "unknown";
public static boolean canResolve( Exception exx )
Class class1 = exx.getClass();
while ( Exception.class.isAssignableFrom( class1 ) )
if ( MQ_EXCEPTION_CLASS.equals( class1.getName() ) )
return true;
class1 = class1.getSuperclass();
return false;
I load other classes and no issue, even jar files, I don't know what is the problem with this file? Also, it is strange is creating class and loading it has no issue, but the issue comes when resolve.
Can anyone help?

Hi:
Put your -resolve flag at the beginning of the list of arguments.
Latest arguments should be files to be uploaded by loadjava.
Best regards, Marcelo.

Documents backup failure in commvault with error Cannot open file ReportViewer.dwp

Hi,
SharePoint Documents backup failure in commvault with error "Cannot open file ReportViewer.dwp" even all necessary permissions are available for all the sites , sql

Hi Praveen,
Whether you tried to backup the library using PowerShell exporting command.
Export sites, lists, or document libraries in SharePoint 2013:
http://technet.microsoft.com/en-us/library/ee428301(v=office.15).aspx
As the commvault is a third party tool and I am not familar with it, I suggest you ask the third party support or forum for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Program Error- cannot open file? Please help! I lost my whole project!

When I try to open an animation psd file, I keep getting a box that says my request could not be completed due to a program error. The file is 23.7 MB and I am using a PC.... I at least need to get the file open so i can export the animation.

I don't personally know how to repair such a file, but I can suggest a utility that will be able to fetch an uncorrupted backup copy if it is in Window's Shadow copy.
http://shadowexplorer.com/ It's a free and easy to use utility. I personally have it.
Gene

Error while opening file from search result in SharePoint Server 2013

Hi All,
I have configured a file system search in SharePoint serve 2013, it is crawling the data and displaying in search result.
But while click on file to open, it gives error "Cannot find 'file://filesystemPath/filename'. Make sure the path or internet address is correct.".
I have given 'Everyone' to read and execute rights on shared folder (used in file system).
Please guide me.
Thanks in advance
Dharmender Sharma

Hi,
Please check whether this issue occurred on all files or a specific file from the shared folder.
1. If this issue occurred on a specific file, please check if the file exists in the shared folder, whether someone deleted it.
2. If this issue occurred on all files , please check the network and make sure the shared folder is online
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

Error when opening file; see image for details

I receive the following error when opening an ai file that was emailed to me.

sk the sender to ZIP the file before sending and then send again.

Win32 exception error when opening file from RH6 in RH7

I received the following error when opening a help file
(.xpj) that was developed in RoboHelp 6 in RoboHelp 7:
An unhandled win32 exception error occurred in RoboHTML.exe
[4692].
This occurred after receiving the notice to upgrade the
project since it was created in an older version. After selecting
Upgrade, I received a runtime error message prompt. After clicking
OK, I received the message above.
Does anyone know how to resolve this issue so that I can open
the project without any problems in RH 7?

Thanks a lot for replying.
waldemar.hersacher wrote:
I have Acrobat Reader 5.1 at home and 6 at work and both work fine with the LV 7.1.1 bookshelf and help file.
Yep, I just uninstalled Adobe Reader 7.0 and installed version 6.0.1. The links now work perfectly, so evidently this is a problem with Adobe Reader 7.0. I'd still like to solve the problem, though, as I really like version 7.0. (Something has finally been done about the program's lengthy start-up time!)
You can reach the PDF-Files also by using Help>>Search the LabVIEW Bookshelf. Does this link work for you?
It works perfectly.
javascript:AcrobatLink('../manuals/lvuser.pdf');
This is a call to a java script function located in pdf.js.
Other reasons:
The Active-X control of Reader 7 has a bug.
Your Internet security settings will not allow this operation. The Active-X will be loaded but will have no access to the file and yo get a wrong error message.
Fair enough. If that is indeed the case, which Internet security setting should I try changing? I haven't done anything unusual to any of those settings. And where is pdf.js located? I tried searching for it but could not find it.
Your advice is greatly apreciated.

Error 7 open file+.vi when opening multiple csv files

Hi,
I it was interesting (and frustrating) that I, intermitantly, got the open file error #7 when I was sitting in a loop opening csv files using ReadFromSpreadsheet file.vi. The ReadFromSpreadsheetFile.vi is a higher level vi which should open the file, read the number of specified lines, then close the file afterwards. IT reads the csv files correctly for one iteration of the outside loop (reads one line from 45 .csv files) then it gives the open file error the second time I try to read them. Perhaps the file is not being closed correctly on the first iteration? This only happens about half the time, and always on the second iteration.
LV 7.1
WIN 2000
Any Help is much apreciated.
Greg
Greg Hahn
Engineering Intern
Digalog Systems Inc.
New Berlin, WI

Hello Greg,
Error 7 indicates the file could not be found - are you moving or deleting files somewhere in your sequence? It's actually better to use dataflow to control your "sequence" of events than to use a sequence structure. It looks like you are building your paths programmatically as well, so that could be part of the problem... you could be building a path to a file which doesn't always exist! I would suggest setting some breakpoints and probes, so you can check your file system against the file paths you're building in your code at strategic times and places. This way hopefully you'll find that the file you're trying to access doesn't exist at the time you're trying to access it - after that it's just a matter of tidying up the logic a bit to make sure that doesn't happen. If you find that file does exist, and you think this is a bug, try to filter out all the unnecessary code so that you have something very simple, and I'll try to reproduce it!
Regards,
AG

Error on opening file

Similar Messages

Maybe you are looking for