Error on outbound processing (- to IDoc), nodetailed error message
Hi guys!
I'm facing a problem with sending IDocs to R/3. My messages have red flag in outbound status, but there is no detailed error message. Everything seems to be ok, but my IDoc doesn't arrive to R/3 and there is that red flag in XI.
What could cause this? It seems like there is some communication problem. Any ideas?
Thank you,
Olian
Hi,
IT will give the status number,what is the status number in IDOC check it and update the thread.
if u find its a data problem u can debugg the FM,go to WE19 and give ur IDOC number and there u will find the option start out bound processing form this opion u can debugg the code and know wat is the error.
Check ur ALE settings.
STEP 1:ALE SETTINGS TO POST IDOC OUT OF SAP R/3
We need to do the following settings in XI
1) Create an RFC Destination to the Sending System in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client
d) Enter the RFC Destination created in SAP R/3 towards other system
e) Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
SETTINGS IN SAP R/3
We need to do the following settings in R/3
Logon to Sap R/3 System
1) Create an RFC Destination to XI in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both must be succesful
2) Create communication Port for Idoc processing Using Transaction(We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile with Outbound Parameters (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang
Then Save
e) Select Partner no. and LS which were create above
f) Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter
g) Select Message type
h) Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type
I) save
4) In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
and then assign logical systems
b) Double click on Define the logical systems
c) Give data for your Logicaal System and Name
d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e) Assign the logical system name to the client
5) Create Customer Distribution model in the transaction code BD64
1) Click on the Create modal View button and enter the short text, Technical name etc as shown below
2) Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type
3) Save the Distribution model
Generate Partner Profiles
Click on Menu Item Generate Partner Profiles
It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute
Then, you will be intimated about the partners, port creation, and outbound parameters creation
4) Distribute Customer Distribution Model
In the menu item GO to Edit->Modal View-> Distribute to the destination client
Popup window appears ,press Enter
You will be intimated about the the Modal View Distributed
Regards,
Phani
Reward points if Helpful
Similar Messages
-
Error in outbound processing:ALE/IDOC
Dear all,
I am getting an error in outbound processing as follows(I have extended the BD12 IDOC for customer master).
The issue is that there is no hierarchie of segments in IDOC transaction we05.(Thogh the hierarchie can be observed in WE30)
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment Z1KNA1M_ADRC does not occur at the current level of the basic type DEBMAS06 (extension ).
This error can have several reasons:
u2022 The segment Z1KNA1M_ADRC is assigned to a group whose header segment does not occur.
u2022 The segment Z1KNA1M_ADRC does not exist in the syntax description of the basic type DEBMAS06 (extension ).
u2022 The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type DEBMAS06 (extension ).
I will be thankful if anybody can help resolve the issue.
thanks.
Edited by: sanjivrd on Aug 4, 2009 2:17 PMhi,
after adding those segments you need to release it.
check it menu you can see the release option, you need to release it.
then only it will work
[Refer following link|EDI: Syntax error in IDoc (segment cannot be identified)]
In the menu edit-> set release
click on it and release
Even check If the Hierrarchy of the segment is correct. This also will result in Syntax Errors.
thanks & Regards,
ShreeMohan -
Hello Rescue Team,
I am facing the following error :\
16.06.2014 23:22:42.164
Error
Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.166
Error
MP: exception caught with cause com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.190
Error
Exception caught by adapter framework: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.190
Error
Transmitting the message to endpoint <local> using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
and the payload transferred is as attached in the attachment below.
I have refered various blogs, however I am still not able to understand how to get the exact location of the error location..According to me, the value that is giving trouble is OTH in <BSARK> however I have checked the permitted values for BSARK on ECC and OTH is maintained.
Can you please help how I can resolve this error.
Thanks
SaurabhHi Guys,
This is solved..I corrected the date format of the ZZTIME segment from 1157 to 115700.
Thanks
Saurabh -
Error while outbound processing
Hi
In WE19, when i enter control record details( sender and receiver port, partner etc ) and then when i
click outbound processing button i am getting a warning saying that "IDOC saved successfully but it
should not or cannot be sent". i am tring to send the IDOC out from ecc6 to xi . can anyone tell me
what would the problem?
thanks and regards
manoharanhi
is this ALE configuration specific to any message or idoc types used because if i use message type
FLCUSTOMER_CREATEFROMDATA iam not getting the warning message. in this case the required
message is displayed( idoc created sucessfully and sent to sap or external system).
regards
mano -
CRM Error in MW_BDoc processing , Type BUPA_REL (work flow messages)
Hello,
We have Messages cominin to our workplace from workflow!! saying RM Error in MW_BDoc processing , Type BUPA_REL..and other info messages..
I can go and check the error from SMW01... But i dont want these messages to be sent to users.
Can you please suggest me how can i make the seting?
thanks and regards,
Lata.Hi Latha.
You can find a button with pencil sign. It says maintain configuration. When you click on that it will take you to next screen where you can maintain the user information to whom you want to send the mail.
E-Mail Address of Receivers : email-id
E-Mail Type : U
Make sure that your basis admin has maintained the batch job : SWWERRE which actually sends the mail. You can check in transaction SOST to see if the email was sent or not if you were expecting it to send the mail.
Regards
Apoorva -
Error in re-processing inbound idocs of status 51
Hi
We are facing problems in reprocessing inbound idoc from BD87 transaction
We have an inbound process code 'STA1' which is pointing to a standard task 'TS30000206'. we have an errored inbound idoc(status 51) of message type 'STATUS' ( standard status change idoc pointing to process code STA1 for a valid port. Whenever we try to process it using BD87 transaction, we are getting errors B1033-'No function module for input process code STA1'.
We dont understand what we were missing. When we try the same for a process code which points to a function module, BD87 reprocesses it correctly.
We tried adding an entry in BD67 with an inbound function module 'APPL_IDOC_INPUT1'. Note that we still had the process code pointing to the same task. This time BD87 reprocessed idoc, but gave 51 again saying that 'Function module not allowed: APPL_IDOC_INPUT1'.
Any pointers or help in this regard will be highly appreciated.Hi,
Please check IDOC TYPE, MESSAGE TYPE & PROCESS CODE and also check the we30, we42. & try BD87 reprocess of an IDOC. -
Process overdue error asynchronus transmission of info idoc 2 error
Hi
For an r/3 job i am getting the below message and it is not progressing from last 2 days and failing in BW with Process overdue error. Can somebody advise me on this.
data soucrce :0CO_OM_OPA_6
The job stucked for last 10 hrs and showing 0 records in BW.
Thanks
SubbuHi,
What are you trying to do...
are you performing any loads from the above said DataSource from R/3 to BW or
are you replicating the DataSource from your source system to BW side...
in any of the above cases..please check whether you have connected well to your source system from your BW system...
for this right click on source system in source system section of RSA1..and check..if everything is fine...then it should take such long time to complete your activity.
if not check in Tcode:SM59 to make sure the connectivity..which your problem can be solved sucessfully...
hope this is clear for you...
Regards
Ramsunder -
Setting EOIO for outbound processing of idoc
Hi ,
In case of standard Idoc processing ( using ALE Services ), we are not configuring Idoc adapter and sender communication channel. I want to set the quality of service as EOIO. How can I do the same??
Please help.
Pragati.hey
have a look at the following
Re: Posting idocs in sequence in SAP from file (without BPM)
thanx
ahmad -
Automatic Payment Process through IDOC and Receive Message Acknowledgement and BANST file format
Hi Experts,
We are implementing payment process to our client through Idoc.
Normally the process will go like below. Once Payment Initiated --> IDoc will generate --> This Idoc process through PI system and send to Bank.--> Once payment data received bank --> it will generate acknowledgement receipt and Bansta file and send it PI system --> This PI system system again send it --> SAP system. Here I want to know the required configuration from PI system to SAP system while receiving acknowledgement and Bansta file. And let me know if u guys have steps...
Thanks,
RaviramHi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo -
Procedure to Error Out Outbound IDocs
Hello,
I have a Requirement in which I am using ORDERS05 IDoc Type and extended it to ZORDER05 to populate Custom Fields and sending the Purchase Order Outbound IDoc to the Vendor from SAP System. Now, my requirement is that if any of the Custom Fields are not maintained in SAP and not populated in the IDoc, I need to Error Out the IDoc with Error Status 26. I am currently working on the SAP ECC 5.0. I have implemented similar Error Handling Mechanism earlier by using Enhancement Framework as I was working in ECC 6.0 environment where I've added the Code by Creating an Enhancement Implementation in the Function Module IDOC_CREATE_ON_DATABASE. But since ECC 5.0 does not have the Enhancement Framework feature, please let me know how to achieve this.
Thank You,
Venkata Phani Prasad KHi
why don't you try using the standard method for validation of data?
By implementing the customer-function EXIT_SAPLEINM_002 or BAdI MM_EDI_ORDERS_OUT you can make checks of completeness of the idoc segments (in your case, additional custom data) and, if they were not complete, report an error message raising the exception DATA_NOT_RELEVANT_FOR_SENDING
ie
if <Idoc Custom Field> is initial.
MESSAGE ID 'S1'
TYPE 'E'
NUMBER '333'
WITH Additional data are incomplete'
RAISING data_not_relevant_for_sending.
endif.
Thus you have the evidence of the error in the processing log of the output message while the IDOC is not created.
The solution works very well and is not invasive.
Regards.
Andrea -
Error In inbound Processing IDoc
Dear All,
I am facing error while inbound processing of IDoc
In status record of IDoc following errors are occuring
Status 60 : EDI: Syntax error in IDoc (mandatory segment missing)
The segment E1MAKTM has the attribute 'Mandatory' in the syntax description of the basic type MATMAS05 (customer enhancement ). However, the segment is missing in the IDoc
Status 51: Application Document not posted
Log details :
Error : Material Number should be filled.
When i checked IDoc all 4 fields in E1MAKTM have the values in inbound IDoc.
Please guide me how to resolve these issues so that IDoc will be posted and Material Master will get created in reciever system.
ThanksHi Praveen,
I checked the data in IDoc for this segment.
It is ok as required in basic message type.
e.g. the error says that mandetory segment E1MAKTM is missing.
when i check basic type
MSGFN : Function
internal data type : CHAR
Internal length : 000003 characters
Position in segment : 001, Offset : 0063. external length : 000003
SPRAS : Language Key
internal data type : LANG
Internal length : 000001 characters
Position in segment : 002, Offset : 0066. external length : 000001
MAKTX : Material Description (Short Text)
internal data type : CHAR
Internal length : 000040 characters
Position in segment : 003, Offset : 0067. external length : 000040
SPRAS_ISO : Language according to ISO 639
internal data type : CHAR
Internal length : 000002 characters
Position in segment : 004, Offset : 0107. external length : 000002
is information.
and data in segment of IDoc is
MSGFN 005
SPRAS E
MAKTX MANATA2000 TEST ALE
SPRAS_ISO EN
which i think is ok.
I have no clue why this syntax error is coming.
Thanks
Niketan -
Lock table overflow 1 & Error 7 when sending an IDoc
dear all,
we r getting error in purchasing cube for itm datasource
2lis_o2_itm for delta...
1.Lock table overflow 1
2.Error 7 when sending an IDoc
3.Errors in source system
when i check in details it is showing :
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
its daily delta..plz give me solution its urgent....
at request in manage...we got some records...wat shud the process..
Thanks in adv
pinky reddy
Edited by: pinky reddy on Apr 8, 2008 7:42 AMsolved
-
Hi ,
I am using LSMW using BAPI for BAPI_ACC_DOCUMENT_POST and in the last step I am getting a IDOC status 62 = IDOC passed to application
where in i have to get 53.
I have checked each and every field but still the staus is 62.
Could anybody tell what could be the possible errors for getting 62 instead of 53 and how do i rectify this?
Regards,
RaviHi Sudhakara,
Status by the SAP system (IDoc Basis):
50 IDoc added
56 IDoc with errors added
60 Error during syntax check of IDoc (inbound)
61 Processing despite syntax error (inbound)
62 IDoc passed to application
63 Error passing IDoc to application
64 IDoc ready to be passed to application
65 Error in ALE service
66 IDoc waits for predecessor (Serialization)
68 Error - no further processing
74 IDoc added by test transactionStatus by the SAP system (Applications):
51 Error - Application document not posted
52 Application document incomplete posted
53 Application document posted
If the information is useful, please post the [oint. Don't forget.Please.
Regards,
Chandra -
IDOC AAE error:IDOC_ERROR_PARSE_FAILURE
Hello Gurus,
I am facing following error in IDOC AAE channel scenario is SOAP to IDOC we are using Integrated configuration.I have mapped all the attributes in the IDOC to 1 and date formats are fine.On Analsys i found for the IDOC Field MENGE is not accepting Decimal values when the value 868.000 is passed IDOC AAE is failing with following error.
When i pass with out decimal like 868 Idoc is posting successfully.
using connection
File_http://sap.com/xi/XI/System failed, due to:
com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to
idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException
occurred while parsing IDocXML for type :state=READING_FIELD_VALUE_TAG,
charPosition=441, lineNumber=1, columnNumber=442" tabIndex=0
ti="0" lsdata="{0:'Transmitting the message to endpoint using
connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException:
Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE:
An IDocConversionException occurred while parsing IDocXML for type
:\nstate=READING_FIELD_VALUE_TAG, charPosition=441, lineNumber=1,
columnNumber=442',7:true}" ct="TV"
bMarkedAsFocussed="true" bResetTabIndex="true"Transmitting
the message to endpoint <local> using connection
File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException:
Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE:
An IDocConversionException occurred while parsing IDocXML for type
<Z2MAK075IDOC>:
state=READING_FIELD_VALUE_TAG, charPosition=441, lineNumber=1, columnNumber=442
I have explored through forum but i didnt find exact solution how decimal values can be handled in IDOC AAE .Please through some light on the issue any help is higly apprecaited.
Regards
Praveen MaareddyHi Praveen
Looks like it will not allow dot(.) or comma(,) .
Check this
A numc field will not allow you to post values like '.' or ',' to it. You need to get rid of the decimal point/comma. You can do that by multiplying the value by 100 or 1000... depending on your decimal places. Then it is possible to post that values to a numc field. A numc does allow only the numeric characters from 0 to 9. If this is not what you want (because you are dealing with an characteristic) you need to use a char infoobject or you need to use a keyfigure.
Problem with conversion char to numc in transference rules
You can change the data type of MENGE like below
result TYPE p LENGTH 8 DECIMALS 3. -
Internal error occured when processing parallel RFC
Dear Experts,
I have created one FM and calling that FM as prallel process in a report program.
CALL FUNCTION 'ZHR_TIME_EVAL_PARALLEL_PROCESS'
STARTING NEW TASK first_task
DESTINATION IN GROUP srv_grp
EXPORTING
p_job = sub_job
TABLES
rspar_tab = rspar_tab.
In development system its working fine. In quality it throwing a dump saying "Internal error occured when processing parallel RFC" . Error mesage number - BT 857.
Any body came across this problem.Please help me to resolve.
Thanks in advanceHi chen,
I have executed the function modules.Its throwing the floowing exceptions.
SPBT_INITIALIZE is throwing the exception INVALID_GROUP_NAME Message number BT - 831.
Function modules SPBT_GET_CURR_RESOURCE_INFO , SPBT_FIND_FREE_SERVER, SPBT_GET_CURR_RESOURCE_INFO are throwing the exception PBT_ENV_NOT_INITIALIZED_YET message number BT - 838 .
How to resolve this problem.
Thanks in advance.
Maybe you are looking for
-
Hi there. I'm new to the use of visual effects and had some questions I just couldn't find anywhere... Perhaps it is because they are so basic, so my apologies if these are stupid questions. My projects have usually been on 16mm, but I recently moved
-
Is there a way to NOT add "_X4" to the pdf file name after batch processing conversion?
whenever i convert a pdf file to a certain profile in batch processing, the pdf file duplicates with the other one having an "_x4" in the filename. i already tried removing in fixups (preflight) but i can't. do you have any ideas? thanks!
-
Releasing static classes in a browser environment
Hi all, got a problem I can't seem to find a solution for, so hoping someone knows what to do with this! I'm running a Java applet in a browser, under Sun's JVM. It has a custom dynamic class loader, which queries our server and downloads patches to
-
HT1589 Create a New Itunes Library
When I choose to create a new library (by holdin down the option key when opening the program) am I creating only an index, or will Itunes automatically start copying the music files themselves to my Mac hardrive? My music file are large, my mac hard
-
Code generating 'LPX-00651: VM Stack overflow'. What's the fix?
While handling huge data, we are receiving the following error stack: ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00663: VM String-Stack overflow. The suggested fix is to: Increase the size of VM stacks in XmlXslVMCr