Error on Output type

We have an output type ZHAD setup for EDI and in the shipment document this output type has a Red status and when i click on it, it says "no communication data has been defined for transmission medium 6". I checked this output in NACE and the Transmission Medium is set to 6.
Please help!

Shiva,
The error message says "No communication data has been defined for transmission medium 6".
When i double click on the error it just shows the same message.
So there are three output types coming up for this shipment document. the two output types are print outs and this third output type is EDI which has Red status, other two has Green status.
And yes partner functions are indeed setup correctly. Just cant figure out why this output type for EDI is not working.
thanks

Similar Messages

Error with Output Type NEU - External Send

Hello Gurus,
I try to send Purchase Order by email, and I got this error message;
Access                    Message               Description
20                    540               Output not found
Access                    (complete)
Field in condition table                                               Field in document                          Value in doc.
Purchasing Doc. Type                                                Purchasing Doc. Type                           ZNB
Please, I really appreciate any help.
Regards,
Hector

Hi ,
Check if you miss any settings in the following steps,
Go to NACE
- Select EF and click on OUTPUT TYPES.
- Then select Output Type NEU and click on processing routines
- In that you have to add a new entry - medium 5
- Then you need to assign a program, form routine and form.
- You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
- Then in PARTNER FUNCTION you need to add a new entry: medium - 5 and function - VN
- For subject of the mail go to Mail Title and Texts. In title give PO No. &EKKO-EBELN &
- Under General data -> Replacement of text symbols give program as SAPMM06E and Form Routine as
TEXT_SYMBOL_REPLACE
- Now the subject will be PO No. xxxxxxxxx.
- You need to maintain your email id in tcode SU01 and also the vendor's email id. - Now while creating a new purchase order change the medium to External Send
- Then go to Communication Method and select CS01 ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN&
- Go to tcode ME9F
- Execute.
- Select the checkbox and click on Output Message.
- You will get a message MAII XXXXXXXXXXX generated
SAP NOTE FOR EMAILING PO :SAP note 191470
Regards,
Prabu

PO Print Error ---- Using output Types+

Dear Experts
we hv defined output type to take PO Print. When We taking the print for service order,
getting the dump.
"ShrtText
    &INCLUDE INCL_INSTALLATION_ERROR
What happened?
    The current program had to be terminated because of an
    error when installing the R/3 System.
    The program had already requested 226785696 bytes from the operating
    system with 'malloc' when the operating system reported after a
    further memory request that there was no more memory space
    available."
Cany anyone hv idea about this.
With Best Regards,
Jaspal Kumar

Hi,
It seems it is a memory allocation problem delete old spool request using the report RSPO1041,
if problem still persists check printer setting in t-code SPAD also have a talk with basis guys.
Hope this solve your problem.
Regards
Bikas

Output type for V2 does not show up in Vl02n

Hello all,
I have following problem:
in transaction NACE, I have marked V2 (Shipping) and clicked on the output type button to create a new output type. I've created the output type with all parameters required.
But now, when I go to Vl02n - Extras - Delivery Output - Header, I get the error message: output type does not exist, when I enter my output type.
What I am doing wrong?
Thanks
Anne

You need to maintain
1) Output types
with Processing routines with the medium and program etc (You must have already done that)
2) Add newly created output type in the respective procedure.
3) Check right access sequence is used if you want to maintain condition record.
4) Maintain the condition record for this output.
Please check onece again your settings.

Output type assign to VF02

Hi All,
I created Output type through NACE transaction.
When i was trying to assign that in tranx VF02>billing #->enter->goto>header--->output.
Here i was trying to assigning my output type.
I am getting error that 'Output type is not defined'.
But when I go to NACE tranx there it exists.
please suggest what went wrong or am i missing some thing.
Thanks in advance,
Deepak.

Hi deepak,
After creating OUTPUT TYPE in NACE ,
U have to assign the output type in SPRO transcation
SPRO - > SD - BILLING -> detemine output type
this is done by SD consultants.Please get their help.
regards,
Prabhu
reward if it is helful

Error while trying to assign an output type to medium external send in smar

Hi,
My requirement is to send a smartform through e-mail as PDF attachment.I have made the changes in the print program of the smart form.When I try to assign the output type to the medium external send in vt02n transaction,it is being saved but it is showing the status as 'not processed'.When I check the processing log it is showing 'Please maintain a output device in your user master data'.But I am able to send the mail and open the attachment.When I try to assign the same o/p type to medium special function,this is being successfully processed .Why am I getting error when I try to assign theo/p type to external send?
Regards,
Hema

Check the logic in the entity adapter ENT_Prov_Permitted_Resources.
This adapter is causing problems when you are trying to assign the resource.

How to extract error message for each output type.

Hi All,
Need your advice on the problem that I have.
Expected Solution:
1. Create an extra column for displaying header output error message from VF02 into a report program.
Steps that i have did:
1. Go to transaction VF02.
2. Enter a billing document number.
3. Hit enter. Click "Goto" > Header> Output
4. Click on the status that is red colour. Click on "processing log".
5. Press "F1" on the red colour message type. (Found out that it is a structure).
Need your advice on the question that I have:
1) How do we know that which "not successfully" process output type belong to which error message class?

Hi Brad Bohn,
Thanks for your advice. I am so sorry about that. Thanks so much for your advice. And i have follow your advices and steps given by you. Appreciate it very much.
But for this issue about how to extract message for each output type. I have follow your steps by using SE30 to trace VF03 and I managed to found out that they are using this function module "WFMC_PROTOCOL_SHOW". Need your advice on this, how do we know each different output type with different error message is pulled from?
From my further research and in depth debugging into this function module, i manage to find this global internal table "PROTO_TAB" which stores all the text messages for each output. How does this internal table is populated?
Thanks in advance.
Regards
Shawn

How to display error message in Billing Output Type (VF03).

Hi,
could anyone suggest how do i display error message via billing (VF03) output type?

i want to display an error message from my sapscript program.
*determine discount
it_zmas-discount = it_zmas-gross_value - zkwert.
MODIFY it_zmas.
ELSE.
MESSAGE ID 'Z0' TYPE 'S' NUMBER '999' WITH 'Please maintain cust pricing grp 34 for ' wa_zmas-matnr.
p_proc_screen = 'X'.
ENDIF.
when user enter billing doc no in vf03, user will click 'issue output type' and select their output type to be printed out.
if there's an error in the print program, it should promt out an error message and do not allowed user to print preview and print the form out.
what i had did previously, i prompt the error message and disable the print preview button. i think its not a good solution and i am not sure how to stop the form from not printing it out.
i was wondering is there any user exit of the output type, vofm (which i had this solutions from my previous question, but unsure how to use it) or any other solutions.
please help.

Error log table and output type

Hi All,
While creating an invoice(while saving billing document) is it poosible to capture the error in a log in table?
And how is this error log table related to the output type?
Thanks

You seem to be confusing saving of the billing document with creation of the output. These are two independent updates (LUWs). A document may be saved without any output.
If there are any errors in the billing document creation, the document just won't be created. Such errors should be captured in the log of the Blling Due list, if it's been run properly.
To update the processing log for the output, use FM NAST_PROTOCOL_UPDATE.

Need input for error caused while trggering a output type

I had created a custom program and assigned it to a custom output type. while processing this output type through VF01(billing doc) it is generating an error saying commit_in_posting. can anyone suggest in this regard........

1Check for VF01 is there any control routine written for this output type which blocks it from triggering this output.
2. are there any condition records maintained which are creating problems.
3 check the out put poecedures aslo....

How to add an error message to an Output Type.

Hello SAPients,
Using a User Exit I'm modifying the segments of an outbound IDoc. When certain conditions apply I trigger an exception
RAISE DATA_NOT_RELEVANT_FOR_SENDING.
It's ok because the IDoc is not generated and the Output Type is set to "Incorrectly Processed" status.
But, when the user clicks the "Processing Log" button there is no informatio of the error occurred. How can I add an error message to the Processing Log of the Output Type?
Thanks in advance for your kind help.

Hi,
Try this statement..
      MESSAGE ID      sy-msgid << Your msg class
              TYPE    sy-msgty << Your message type
              NUMBER sy-msgno << Your msg no.
              WITH    sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 << Other info
              RAISING data_not_relevant_for_sending.
Regards,
Joy.

Update was terminated error while trying to attach output type to VA22

Hi
We are getting the below message while trying to attach output type to quotation in VA22 transaction
Can you tell us what exactly the problem is?
It doesn't happen with other output types...
Update was terminated
System ID....   PEQ
Client.......   300
User.....   Swetha
Transaction..   VA21
Update key...   1CB83C9AAEF946C8A1CDE4E19BC94479
Generated....   19.05.2008, 08:22:54
Completed....   19.05.2008, 08:23:41
Error Info...   Application area: /SMB40/SSFCOMPOSER , message no.: 002, no entry found in T100
Regards
Sudha

Hi ,
Please check the message in the table - T100 using transaction se11. You might get the answer.
Thanks
vamshi

Output Type ZF01 for Billing Error...

Hi Experts,
I am trying to configure the OUTPUT Type ZF01 for Archiving Billing docuemnts using Application V3. At present output type is configured with all paramenters for archiving and when we are testing that we are facing below error.
File name
OD0NP-WAG040\arch_exch\ is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name
OD0NP-WAG040\arch_exch\.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
We have the above file path configured and it has all access for sap system and users.
We have configured required details in NACE t.code and not sure if there is some thing else we need to take care off, so appreciate your help around this.
--Thanks
Pankaj

Hi,
Is there any report (like RSNAST00) which needs modification in order to make the output type work as required.
Appreciate your quick help around this.
--Thanks
Pankaj

EDI Output Type error

Hi,
I have an output type ZSVC for sales contracts of a type. When I try to assign the output type ZSVC before saving the sales contract, I get the following error,
Maintain outgoing EDI-connection data for partner
Any idea what it could be. I have maintained the partner profile for that customer, with the requisite data.

Maintain outgoing EDI-connection data for partner
Message no. VN032
Diagnosis
The system could not locate the EDI partner agreements (outbound) for
    partner .
System Response
You cannot use transmission medium 'EDI' with this partner.
Procedure
Maintain the EDI partner agreements for partner . Make sure to create
    entries for output control as well as for outbound parameters.
This is the error I get again and again. I have however maintained the partner data in SPRO EDI Partners - >
Any bright idea guys...

Output type processing error for adobe forms

We have created one output type in NACE transaction for Application V1(Sales) and attached the Adobe form to that output type. Whevener i am creating or saving a quotation / Sales order that output type is not processesed rather it is giving an Express document error that 'Update was terminated'.
Please help me out to solve it.

It is processed as there was a issue in the program.

Error on Output type

Similar Messages

Maybe you are looking for