Error on program start up

I keep getting message saying my accounts about to expire even though I have auto-renewal and bought a new subscription.
William Campbell

Hi There - when you see the trial expiring message are you able to click on a button labeled "license this software"? if you see that, then you shoudl be able to log on with your Adobe ID that is associated with your Creative Cloud Membership and this will activate your software.
let me knwo if that works.
thanks,
Todd

Similar Messages

Internal Communication Error at Program start.

Hi experts,
We are using the FM 'SXPG_COMMAND_EXECUTE' to execute the external command.Some times the program got canceled and error is 'Internal communication error at program start (see system log)'. But when rerun the same program it get executed successfully. Does anybody have the idea why this is happening.
Thanks in Advance.
Abhishek.

Hi Abhishek,
I recommend to look for the error codes contained in the syslog and for their meaning. Maybe the following SAP Notes might be helpful for you:
[202227|https://service.sap.com/sap/support/notes/202227] Recommended login shells
[10403|https://service.sap.com/sap/support/notes/10403] Starting external programs
Best regards,
Andreas

CS6 crashes with runtime error on program start up

I installed CS6 with no problems but I have had to uninstall it because every time I open the program I get this message:
It is impossible to clear this message and I have to reboot to remove it.
Hard and software: Asus P8Z68 Deluxe/GEN3; 2700K; 16Gb ram, SSDs and HDDs (all programs on one SSD and scratch disk for Photoshop on another, data files on HDDs); Gainward Phantom Nvidia vga card 1Gb. All drivers upto date. OS is Windows 7 Ultimate 64bit; among other installed programs - Photoshop 7, CS4 and CS5 - no problems with them at all).
I would have submitted a crash report but couldn't discover how to despite following a number of links.
I wonder if anyone else has had this problem?

You have a plug-in misinstalled. More details here:
http://forums.adobe.com/message/4282665#4282665

Driver program for adobe form error no job started

Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.

Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

I get this error message when trying to start Itunes - "Runtime Error! Program: C:\Program Files\iTunes\iTunes.exe R6034 Anapplication has made an attempt to load the C runtime library incorrectly. I have tried to have iTunes re-install and correct.

I get this message when I try to start iTunes
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime Library incorrectly.
I have tried to have iTunes re-install but still get the error.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 4 when starting the extraction program

Hello Gurus,
Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
Please find the error message bello.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
Thanks,
Muddu Reddy.

Hi sekhar,
You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
Tell me if you still face some problem.
Thanks
Ram

Adobe Photoshop CS6: Photoshop.exe - System Error The program can't start because ONCoreFoundation7

I get this error after updating ONONE premium edition 8 to 8.1
been to their site no luck in resoving error.
I click ok to error PS cs6 still launches, just annoying.
ONCoreFoundation7.dll is part of ONONE 7

after updating ONONE premium edition 8 to 8.1
does not say windows 8 or 8.1
again, not perfect Suite 7, updating ONONE premium edition 8 to 8.1
does not say 7
here's your more info
I'm trying to fix an error message not covered in the knowledge base.
I open PS CS6 (after updating to PE 8.1) and I get an error message...
Adobe Photoshop CS6: Photoshop.exe - System Error
The program can't start because ONCoreFoundation7.dll is missing
from your computer. Try reinstalling the program to fix this problem
I followed instructions in this article, but still get the error, it doesn't stop PS from launching after clicking ok.
Does anyone know the fix? I even tried reinstalling PE 8.1.
PE=Premium Edition

Hi, I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer".

Hi, I hope some one can help as I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer". I understand that I need to delete and reinstall iTunes but all of my music has been uploaded from CD's and I'd like to know if these are safe if I delete iTunes of if they too will be deleted. I have over 1300 songs so this is a big question for me. Many thanks.

Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Datasource problem - error 8 when starting extraction program

Hello,
we are using a datasource (data mart) to write data from one cube to another.
When running the infopackage we get the 2 errors below. When testing with the extractor checker, everything was fine. Datasource was replicated, transfer rules are active.
1. Message no. R3019 - Error 8 when starting extraction program
2. Message no. RSM340 - Errors in source system
more error info...
" Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API ."
Has anybody any ideas?
Thank you,
Ruairi

Hi Friend,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Regards,
varun.

Message "Error 4 when starting extraction program" with any extraction.

Hi to everyone.
We have a problem in a pre-existing BW system of development.
When we start any extraction (for example 0MATERIAL_ATTR), the monitor give us the following error:
ERROR 4 WHEN STARTING THE EXTRACTION PROGRAM (R3-19).
I've checked the link between the two system, and it may be right. When I check the soursystem from BW I havn't any error.
Then, when I test the extractor on R/3 with RSA3, any error as result and the tester extracts a lot of records.
Anyone have any idea ?
Max

Thanks for your fast help.
Claudio, the messages are only two ...
- Error 4 when starting the extraction program
R3 19
- Errors in source system RSM 340
No dump on the R/3 and BW.
Roberto, I've followed the note 325470 too, but the problem remain. Only one ... the note 147104 say ...
"This server must be capable of starting a background process for data extraction".
Is there a way to check this point ?
Thanks in advance guys.
Max

Acrord32.exe system error the program cant start because msvcp100.dll

Hello Adobe Community,
Im having problems with an XP Pro machine that is joined to a domain where i keep getting the following error message : " acrord32.exe system error the program cant start because msvcp100.dll"
I can temporarily solve this by uninstalling Adobe Reader and then reinstalling it. But the next day the computer restarts the same error comes up again. In other forum there was a solution to install Microsoft Visual C++. I installed it but the same problem happen again the next day. The Adobe Reader version I have installed its XI (11.0.03). If you guys could help me with this issue that would be great

It's not C++ you need to install, but the Microsoft Visual C++ 2010 Redistributable package. But I have no idea why this happens again the next day.

ITunes error: This program can't start because iAdCore.dll is missing from your computer. Try reinstalling the program to fix this problem.

iTunes error: This program can't start because iAdCore.dll is missing from your computer. Try reinstalling the program to fix this problem.
Windows 7 Professional. AMD 64 bit processor. New install of itunes.
Unable to uninstall. Unable to reinstall. Sigh.

THANK YOU! turingest2
See Troubleshooting issues with iTunes for Windows updates.
This Fix WORKED!!!!! And had aready tried MANY others first...
https://discussions.apple.com/docs/DOC-6562#iadcore <-- This is a direct link to solution...

Error on program start up

Similar Messages

Maybe you are looking for