Error on pst file When leave outlook opend without any action for a while

Hi,
When I leave my outlook opend without any action for a while it reports an error in the pst file and out of memory error,so i have to close outllok then open it again
this problem is general (not just on my pc ), i tried compact for the pst file but the problem still occure.
i use outlook 2007 and sun java System Connector 7.3
my mail server is :
Sun Java System Communications Express 6.3
sun java System Connector 7.3 patch id is 139162-05

_1-when i click on any message the error is:_
Error on C:\Users\Administrator\AppData\Local\Sun\Outlook Connector\SJOC_1.pst
*2-when i click on folder such as drafts,sent items ..... the error is : out of memory please close..............*
if i close the outlook then open it again every thing is working well
i monitor the outlook process, it was as the following:
at 9:01 am 17.628 K
at 9:17 am 18.348 K
at 9:50 am 25.972 K
at 10:05 am 20.220K
the messaging server version is:
Sun Java(tm) System Messaging Server 6.3-7.04 (built Sep 26 2008; 32bit)
libimta.so 6.3-7.04 (built 18:30:54, Sep 26 2008; 32bit)
SunOS Cegco-Internet 5.9 Generic_122300-22 sun4u sparc SUNW,Sun-Fire-880
the clients os is windows vista bisuniss
all updates are installed
this problem is common in my company
Edited by: Firas_Khadrawi on Dec 8, 2009 9:09 AM

Similar Messages

Duplicate pst files when openning Outlook 2010

Hello,
Each time I open iCloud in Microsoft Outlook 2010, a new .pst file is created. it has the same name, but the number increases. e.g emailaddress(1).pst, emailaddress(2).pst, etc. It also downloads the email items each time and seems to be rebuilding the pst file. Is it possible to setup Outlook, so that only one pst file is used? FYI, I'm setup using IMAP, so that multiple devises can access the email. I'm using windows 7.
Any guidance will be greatly appreciated
Best regards
Tony

Thanks you all for discussing this thread, I too was a victim of email migration (migrating from apple mail to outlook in windows). Thanks to this thread I got Apple mail to pst converter Mac Version: http://applemailtopst.com/download-free-trial-applemail-to-pst-converter/.
To look out for the best tool I downloaded both the version and performed a check in both. The mac version had an extra edge s it could directly access the apple mail data and there was no need to export or archive apple mail data. Possibly it took only three
clicks to complete the coversion process and a few minutes.
Thanks once again for this thread.

Programmatically backup outlook pst file when outlook is in use

Hello,
I want to develop utility to take backup of outlook pst file automatically even if outlook is in use. When outlook is closed then I am able to copy pst file but when outlook is in use then its showing error "The process can not access the file
because another process has locked a portion of the file".
Does anyone have idea how to programmatically copy pst file even if outlook is open? Another question is does anyone have idea of incremental backup of pst file?
Please give some idea if you know the answer.... Its really very urgent..
Akshay Shah

Hi,
You erroneously posted your question on the Project forum which is dedicated to the Microsoft scheduling and planning application.
Please post it on the right forum to have appropriate help, starting from here:
https://social.technet.microsoft.com/Forums/en-US/home?forum=whatforum
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to Repair Database .pst file of MS Outlook?

I am unable to open my Outlook file due to corruption how to repair database .pst file of MS outlook. I was using Microsoft Outlook 2007 from last 2 years and everything is going well. But suddenly I have got an error message “outlook data file cannot
be accessed ” while accessing PST file. It was also suggested me to run scanpst.exe tool. I had tried to repair my inaccessible PST file many times with the help of Inbox repair tool. But this utility is unable to solve my issue, please suggest me how
can I repair my corrupted database.pst file without losing any information. Is there any way to restore all information from inaccessible PST file into new PST file to continue working as previously?

Hi,
My first recommendation is Scanpst.exe from Microsoft, but since you mentioned it didn't fix the issue, you can also try some 3rd-party tools to fix the data file. Please remember to keep a backup before performing any actions on the file.
In case the issue was caused by the corrupted profile, you can also create a new profile and setup an account in Outlook, check if you can open the .pst file.
For reference:
How to create and configure email profiles in Outlook
http://support.microsoft.com/kb/829918/en-us
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

In your experience what are the most common errors in binding files when deploying?

As the title suggest I'm interested in discussing the most common errors in binding files when deploying.
Reason for this is that I'm currently working on a Powershell script that can parse a binding file and create a reader friendly report (rtf format) with various information.
But the main purpose for this script is to find common errors in the binding file used. And so far these are the ones I've thought of:
- Tracking enabled for either services or the pipelines they are using (if it's a binding meant for Prod).
- Orchestrations logical ports not having any ports bound to them.
- URI containing certain words that's not ok. For example if a binding meant for Prod contains the word "test" anywhere in the URI then that should be reported in the created rtf report. This also applies vice versa.
So now I need your help with coming up with more ideas on common errors that need to be looked after and reported on if found!
Additional features the report should contain:
- Listing the details of each orchestration, send port, receive port along with their associated receive location(s). To better understand and get a quick overview on exactly what settings are planned to be deployed. Especially the "TransportTypeData"
section which otherwise can be quite tedious to read.
- List each unique host instance, so that I can easier see directly which ones might need a restart after an import.
I'd appreciate if you can come up with any more features that should be included in this script.
/Christian @ IntegrationAdmin.com

Filter on send port not on the same line as the Filter tag.
This one is a nice one, I ran into it several times. Mostly after copy/paste of a port definition for a binding file, because Visual Studio is formatting after paste the XML in a way the filter will get invalid. This leads to a cryptic error
during importing the binding.
http://winterdom.com/2008/06/biztalkfiltersnotgettingimported
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question.

Error creating AIR file: Unable to build a valid certificate chain for the signer.

Hi, My boss got a certificate from Thawte, and I'm getting this error message when building my AIR app.
Error creating AIR file: Unable to build a valid certificate chain for the signer.
I'm on windows XP.
thanks,
steve

To manage your code signing certificate, please see
http://www.adobe.com/devnet/air/articles/signing_air_applications_print.html
The error you are seeing is typically caused by exporting a cert without the trust chain. On Windows, in IE, you can manage your keystore by going to
Internet Options > Content > Certificates
When you export the certificate needed for signing your app, be sure to check “Include all certificates in the certificate path, if possible”.

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Sometimes, when we open the multiple pdf files, menu bar is disappearing without any reason.

Sometimes, when we open the multiple pdf files, menu bar is disappearing without any reason.

Hi pramodg23752205,
Okay, so are you facing this issue with all the machines or with a particular machine?
Does 'F9' key resolves the issue?
Regards,
Rahul

HT4352 my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary

my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary from where it should show my playlist any sugestion. it was wifif thoufgt it might be that so i tried ethernet wired and does the same any suggestions my connection is up when it shuts down

Did you restore to factory defaults/new iPod and sync stuff to your iPod? If you restore from backup there may be some corruption that is now in the backup.

Error reading Remote file when the connection is slow

I have a program that reads a file from a remote server. The file is an xml file.
This uses URL inputstream.
This works just fine but when the xml that it reads grow in size, the content of the file is not completely sent to the variable string.
I have come to a conclusion that slow connection to the server could somehow cause this. The error is intermittent. Sometimes it works, sometimes it doesn't.
I hope you guys could help me tune this code or if you have suggestions like other ways to read a remote file. Which will work even if the file grows bigger.
Thanks
public String readRemoteFile(String fName)
try
boolean bolContinue = true;
URL tUrl = new URL(fName); //create a URL object with the server source file
//Logger.log("Getting filesize : " + fName);
InputStream is = tUrl.openStream();
String strFileSize = "";
StringBuffer sbXML = new StringBuffer();
byte[] b1 = new byte[10];
               int intBytesToDownload = 0;
int i = is.read(b1);
strFileSize = new String(b1, 0, i);
//Logger.log(fName + " --- " + strFileSize);
try
intBytesToDownload = Integer.parseInt(strFileSize);
catch (NumberFormatException nfe)
Logger.log("Could not read the file : " + fName);
return null;
int bytesReadInTrip = intBytesToDownload;
int bXMLLocation = 0;
while (bytesReadInTrip > 0)
bytesReadInTrip = 0;
bolContinue = true;
//System.out.println(strFileURLPath);
tUrl = new URL(fName + "&fileOffset=" + bXMLLocation);
//Logger.log("reading file1 : " + fName + "&fileOffset=" + bXMLLocation);
is = tUrl.openStream(); //get Input stream of the server file.
//continue download till continuation flag is set i.e. input stream
// is available.
while (bolContinue)
          byte[] bXML = new byte[intBytesToDownload];
i = is.read(bXML);
//Logger.log("i " + i);
if (i > 0)
bXMLLocation += i;
bytesReadInTrip += i;
String strTmpXML = new String(bXML,0,i);
     sbXML.append(strTmpXML);
else
bolContinue = false;
is.close(); //close the input stream of the input file.
//Logger.log("bytesReadInTrip : " + bytesReadInTrip);
//Logger.log("Read file : "+ sbXML.toString());
return sbXML.toString();
catch (Exception e)
Logger.log("Exception while reading the file : " + fName);
return null;
}

well looks that ur run() method is being called more then one time (..)
why dont u try file method exists() before writing it to ensure that it is not written previously

\\Error Reading Rules File when dimbuild with DLR

Hi
I am using Essbase 11.1.2.1.
I create a DLR via the web console EAS (11.1.2.1 too) : a very simple one : dimbuild DLR, ";" as separator, 2 fields (parent and child)
when i try do do a "Update Ouline..." with a very simple file (1 line : accounts;test) I have this error message "\\Error Reading Rules File"
I don't know if it can help but if I create the same DLR on another 7.1 essbase serveur through this same wec eas console (11.1.2.1), I have no problem...
another information, too : my 11.1.2.1 server has a //ESS_LOCALE English_UnitedStates.Latin1@Binary ESSLANG. My 7.1 server has a //ESS_LOCALE French_France.ISO-8859-15@Default ESSLANG. I really don't know if there is a link, or absolutely not.
Thanks in advance for your help!
Fanny

unable to load essmsh.exe : the error message seems to indicate that it is a problem with a path in the environment variables.
So if you say that the "Error Reading Rules File" is typically a path issue, all is probably linked!
The admin will probably correct that tomorrow : I let you know if it solves the problem!
Thanks!
Fanny

IMovie error - cannot create file when I attempt to share

I am using MAC OS X 10.9.5, iMovie 10.0.5. I have successfully create many movies by using Share to file - of long and short sizes. This particular time I made couple of minor edits to my movie which had previous shared to file with no problem, and when I went to Share to File I get an error message. The Share fails with the error "cannot create file".
I have plenty of disk space.
All other applications are closed, just imovie running.
The destination is the mac internal hard drive.
I deleted imovie and re-installed it.
I deleted the Render Files.
No luck.
Any clues would be greatly appreciated.
Super frustrated.
Thanks.

docjob2001 wrote:>
Is there a way to go back download 9.02 again?
you can download it from here: http://www.versiontracker.com/dyn/moreinfo/macosx/10057115&vid=11116557&mode=inf o
My only backup is version 8.2 and will not open my itunes library - is there a workaround for this?
maybe. you could try this:
to downgrade to a previous iTunes version, you could try this user tip that seemed to have worked for some:
+1) Quit iTunes.+
+2) Delete iTunes from your Applications folder.+
+3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.+
+4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".+
+6) click here to download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the disk image and run the installer.+
+You should now be able to run iTunes 8.2.1 again.+
+And your iTunes will restore to before you upgraded and you won't lose anything+.
good luck !

Errors with configuration files when using Oracle BI Beans 10.1.2

java.lang.NullPointerException
     at oracle.dss.persistence.persistencemanager.server.PersistenceManagerSupport.loadFactoryFromXML(PersistenceManagerSupport.java:359)
     at oracle.dss.persistence.persistencemanager.server.PersistenceManagerSupport.<init>(PersistenceManagerSupport.java:157)
     at oracle.dss.persistence.persistencemanager.server.PersistenceManagerImpl.<init>(PersistenceManagerImpl.java:88)
     at oracle.dss.persistence.persistencemanager.server.InitPersistenceManagerFactory.getInitialContext(InitPersistenceManagerFactory.java:36)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at javax.naming.directory.InitialDirContext.<init>(Unknown Source)
     at oracle.dss.persistence.persistencemanager.server.InitialPersistenceManager.<init>(InitialPersistenceManager.java:105)
     at oracle.dss.connection.server.drivers.persistence.PersistenceConnectionDriverImpl.connect(PersistenceConnectionDriverImpl.java:150)
     at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
     at oracle.dss.connection.client.Connection.connect(Connection.java:425)
     at oracle.dss.connection.client.Connection.connect(Connection.java:342)
     at oracle.dss.metadataManager.client.MetadataManager.setConnectionObjects(MetadataManager.java:4235)
     at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:924)
     at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:840)
I got these errors when I am trying to test the jar file on the test system other than Development System. Please help!!!

Not at this point in time. It might work but I have not tried it yet. I think the OLAP API has been upgraded for 11g and this requries a repackaging a BI Beans. At the moment I have not heard of any timescales for 11g certification.
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Import error on XMP files when bringing in image sequences to AE cs6

Hey everyone,
I'm having difficulty getting AE 6 to import my still image timelapse sequences. It throws an error called-unsupported file type extension. I did not have this problem with cs 5.5.
My workflow goes as follows.
-bring RAW stills into bridge and batch edit them in camera raw.
-move stills to LR timelapse and de-flicker them
-import still sequence into after effects.
The xmp files should change as I edit them in camera raw and in LR timelapse but they will not import into AE cs6.
Any help would be greatly appreciated,
Thanks for your time.

They are still pictures that were shot in RAW on a still camera. It calls them cr2 files in windows explorer. They are raw image files brought into bridge and when edited in camera raw-the metadata is saved to an xmp file that accompanies each image. Then you bring the images into LR timelapse and it just adjusts the xmp(metadata) files to deflicker them. Much in the same way that camera raw works. You do not have to export the still at all because all of these changes are saved in the metadata. Then you drop the still sequence into AE and export it as video. It just wont let me export them into cs6 with these xmp files.
The raw files are called cr2 files and without the xmp file-they will import into AE. I tried importing some other camera raw files (NEF files) into AE with the xmp's and it worked. For some reason it does not like these RAW cr2 files with the xmp metadata.
Thanks for your time and help,

Error writing to file when installing iTunes 10.

When I updated to iTunes 10 yesterday, it updated fine, but when I went to run it today, it had to configure. It was almost completed when I got the error "Error writing to file: C\Program Files\iTunes\iTunes.Resources\ru.lproj\IPod touch License.rtf". I tried to access the file, but it says the file cannot be found.
I uninstalled iTunes, and went to re-install it, but at about the same time I get the exact same error.

Hi,
Did you guys finally find solution to the problem?
I have been trying to install Oracle 9.2.0.1 on redhat 8.0 box, for ages now. I get the following error first during install
Error in writing to file libclntsh.so.9.0
Then it is a series of errors, similar.
In the end there is the dreaded linking error... for the ins_rdbms.mk sdo_on
i just cant handle it.
What the hell is wrong?
I have done everything right as far as i know... any solutions?
cheers

Error on pst file When leave outlook opend without any action for a while

Similar Messages

Maybe you are looking for