Error on recovery 0xe0ef000d

keep geting the same error on recovery hdd ok and memory
this is using the 3 recovery discs i created and no longer have recovery on hdd
pavilion dv7-3112sa

It could be a bad disc.
You can call HP and order a recovery disc set for a nominal fee.
Yes you can use the COA product key to install W7 from a regular installation disc, but then you need to download and install all sorts of drivers from HP.
HP support page for your model
http://h10025.www1.hp.com/ewfrf/wc/product?product=4100032&cc=us&dlc=en&lc=en&query=dv7-3112sa&tool=

Similar Messages

RMAN-06004:ORACLE error from recovery catalog ... ORA-00904: : invalid ...

Good Morning All,
One of our RMAN backups is failing with the following error message. Any suggestions would be greatly appreciated.
==================================================================================================
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Edited by: ORA_UMAIR on Dec 31, 2008 7:51 AM

This Oracle Database is 9.2.0.6.0. Here is the complete log file. The RMAN script that I am using ran successfully many times before.
====================================================================================================
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: CUSTPR (DBID=525071053)
RMAN>
RMAN> #########################################################################
2> # LEVEL 0 BACKUP #
3> #########################################################################
4>
5> # Configure backups to be written to disk.
6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Set the retention policy to a recovery window of 7 days. This ensures that
2> # RMAN retains all backups needed to recover the database to any point in time
3> # in the last 7 days. You can use the DELETE OBSOLETE command to delete
4> # backups that are no longer required by the retention policy. To exclude a
5> # backup from consideration by the policy, you can use KEEP option with the
6> # BACKUP command.
7> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to use two disk channels for backup, restore, recovery, and
2> # maintenance operations.
3> CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write disk backups to the /backup directory.
2> # The format specifier %t is replaced with a 4-byte timestamp, %s with the
3> # backup set number, and %p with the backup piece number.
4> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to back up the control file after each backup.
2> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write controlfile autobackups to the /backup directory.
2> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Enable the backup optimization feature introduced in 9i to make sure that
2> # RMAN won't backup an archivelog or datafile if there already exists a backup
3> # of that file. The FORCE option can be used to override optimization on a
4> # specific BACKUP command.
5> CONFIGURE BACKUP OPTIMIZATION ON;
old RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Use the SHOW ALL command to see the current configuration settings.
2> SHOW ALL ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%d_bkp_cf%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' FORMAT '%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/orahome2/custprdb/9.2.0/dbs/snapcf_custpr.f'; # default
RMAN>
RMAN> # The following commands are run each day to start the backup cycle.
2> # The steps are:
3> # - Take an incremental level 0 backup of the database. A level 0 backup is
4> # a complete backup of the entire file which can be used as the basis
5> # for a subsequent incremental backup.
6> # - Backup all archivelogs that have not already been backed up.
7> # - Delete on-disk archivelogs older than seven days.
8>
9> BACKUP INCREMENTAL LEVEL 0 FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p'
10> DATABASE maxsetsize 33G
11> PLUS ARCHIVELOG FORMAT '/backups/admin/custpr/%d_bkp_al%t_Set%s_Piece%p'
12> delete all input;
Starting backup at 12/30/2008 22:01:40
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=8008 recid=7910 stamp=674638862
input archive log thread=1 sequence=8009 recid=7911 stamp=674671207
input archive log thread=1 sequence=8010 recid=7912 stamp=674697380
input archive log thread=1 sequence=8011 recid=7913 stamp=674780433
input archive log thread=1 sequence=8012 recid=7914 stamp=674784211
input archive log thread=1 sequence=8013 recid=7915 stamp=674863288
input archive log thread=1 sequence=8014 recid=7916 stamp=674863300
channel ORA_DISK_1: starting piece 1 at 12/30/2008 22:01:41
channel ORA_DISK_1: finished piece 1 at 12/30/2008 22:03:47
piece handle=/backups/admin/custpr/CUSTPR_bkp_al674863300_Set3083_Piece1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:07
channel ORA_DISK_1: deleting archive log(s)
archive log filename=/custpr/arch/arch_custpr_8008.log recid=7910 stamp=674638862
archive log filename=/custpr/arch/arch_custpr_8009.log recid=7911 stamp=674671207
archive log filename=/custpr/arch/arch_custpr_8010.log recid=7912 stamp=674697380
archive log filename=/custpr/arch/arch_custpr_8011.log recid=7913 stamp=674780433
archive log filename=/custpr/arch/arch_custpr_8012.log recid=7914 stamp=674784211
archive log filename=/custpr/arch/arch_custpr_8013.log recid=7915 stamp=674863288
archive log filename=/custpr/arch/arch_custpr_8014.log recid=7916 stamp=674863300
Finished backup at 12/30/2008 22:03:47
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Recovery Manager complete.

Error in recovery media creation

I bought a new HP laptop recently.Its a HP PAVILION G6 2320TX.I ran the Recovery Media Creation .After the initial setup and burning of files onto my first dvd,when it comes to verify, i am getting an error that states "We are experiencing errors in recovery media creation. Please try again.” ,and the disk ejects out.
I use SONY DVD-R media so,i guess there shouldn't be any problem with the brand.I tried doing this a couple of time and each time i got the same error.
Has anyone else experienced this? Any help/suggestions would be greatly appreciated!
Thanks,
Akash.

Hello Akash_Sanu,
I see that you are having problems with the recovery discs creation on your computer.
I would suggest trying a different brand of disc, here is a link that explains the recovery discs process. If you continue to have problems with the disc creation I would suggest contacting HP support for a set of recovery discs.
Here is a link to the contact options for HP support.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Error Handling/Recovery Mechanism in ODI

can u ps provide sum infor related to Error handling/recovery mechanism in ODI?
say for instance a link breaks down while moving data from source to staging or/and staging to target..what will happen?? is it like that the processed records will be dumped into the target table, or no record will be moved into the target table?
Is it like "ZERO or ALL" kindaa stuff that ODI works on?
I really need help on this?

There is an option - Restart in the Operator. When you right click and click on restart .ODI will start from the steps failed.
I beleive if the database is down then restart can help you but if the agent is down , then you might need to start the session completely ,reason being when agent send the SQL process to database it wait till the Database process and send the record back to it.During that interval if the agent goes down the database would have processed the records but agent wouldn't be ready to read those record and by the time you bring the agent up ,the session would have died and so you would need to start the session again.
You can test and see if the Restart option helps you .

Fatal error in recovery manager

Hi,
I am trying to restore my DB for disaster recovery, I have taken a backup earlier in flash_recovery_area with controlfile autobackup on.
I have successfully restored spfile and controlfiles, but when I am running restore database, rman is crashing:
RMAN> startup force mount;
RMAN> restore database;
Starting restore at 17-JUL-13
Starting implicit crosscheck backup at 17-JUL-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=170 device type=DISK
Crosschecked 4 objects
Finished implicit crosscheck backup at 17-JUL-13
Starting implicit crosscheck copy at 17-JUL-13
using channel ORA_DISK_1
Finished implicit crosscheck copy at 17-JUL-13
searching for all files in the recovery area
cataloging files...
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
ORA-01092: ORACLE instance terminated. Disconnection forced
RMAN-03002: failure of restore command at 07/17/2013 23:44:08
ORA-03113: end-of-file on communication channel
Process ID: 10307
Session ID: 162 Serial number: 9
ORACLE error from target database:
ORA-03114: not connected to ORACLE
please help me out identifying the issue.
thanks,

this directory is actually empty : /scratch/oradba/db/apps_st/zDB/dat/
It had all data files earlier, but to try disaster recovery I manually removed all of them to bring them back from backup.
I am following all these steps: Hemant's Oracle DBA Blog: RMAN Backup and Recovery for Loss of ALL files
but at restore database, its crashing out.

HT4848 Error creating recovery disk in Disk Assist

I've carefully followed all instruction in this post: http://support.apple.com/kb/ht4848, but I am having an error when creating the recovery disk.
The recovery Disk Assist starts creating it, but stops early on. The message I get is titled "Conclusion," and it says "The recovery drive wasn't created. There was an error creating recovery disk."
Can anyone help me with this? I followed all the steps in the post above and I also created the partition on the external drive.
I really need to wipe out my computer and make it appear "as new" because I am selling it. Any help would be great!
Thanks!

Same happened to me. This makes absolutely no sense, but I just kept trying and trying then it finally worked. For me, it hasn't been worth the bother. These restore DVDs don't work like the ones I made for an Acer laptop, for example. On my Acer, I repartitioned, reformatted my drive and was easily able to restore my computer before I sold it. I've been going nuts trying to restore my computer after a clean install of Windows 7. Still can't get it to work.

DB_PAGE_NOTFOUND error after recovery on a CDS database

I am getting a DB_PAGE_NOTFOUND error after recovery, with a database that is configured in CDS mode. The error occurs after I insert several rows, bring down the process, remove the environment files and start the process which attempts to insert additional rows - gets a DB_PAGE_NOTFOUND error. The error persists ie. terminating and starting a new oprocess does not resolve the problem.
Amy help will be appreciated.

Assuming, that the db is corrupted and that CDS db's can get corrupted - is there any way, I can reduce the frequency of these errors by increasing Cache, page size etc.?
Following is my DB configuration:
               dbEnv_->open(envHome_.c_str(), envFlags_, 0);
                dbEnv_->set_errpfx(envHome_.c_str());
                dbEnv_->set_thread_count(16);
                dbEnv_->set_cachesize(0,(100*1024*1024),2);
                envFlags_ =   DB_INIT_CDB | DB_THREAD | DB_INIT_MPOOL ;
                envFlags_ |= DB_CREATE ;
                dbEnv_->open(envHome_.c_str(), envFlags_, 0);
db->set_pagesize((32*1024));
            db->open(NULL, temp.c_str(), tableName.c_str(),\
                DB_BTREE, DB_CREATE | DB_THREAD , S_IRUSR | S_IWUSR);
                dbEnv_->open(envHome_.c_str(), envFlags_, 0);
The platform is HPUX. The problems occurs periodically - i.e. not every time.
Thanks for your help.

Error installing recovery catalog

Hi,
Inorder to implement RMAN in oracle 10g in windows environment I created a separate table space for rman and created a user as rman1;
then I issued the following commands :
GRANT connect, resource, recovery_catalog_owner TO rman1
grant create session to rman1;
grant create type to rman1;
then i entered into rman from dos prompt,
rman catalog=rman1/rman1@tc
from rman prompt I issued the command,
create catalog tablespace RMAN1;
then the following error occurs,
RMAN> create catalog tablespace RMAN1;
ORACLE error from recovery catalog database: ORA-01031: insufficient privileges
RMAN-00571: ====================
RMAN-00569: ===== ERROR MESSAGE STACK FOLLOWS ===========
RMAN-00571: ====================================
RMAN-06433: error installing recovery catalog
Due to this error I am unable to proceed further and let me know the solution.
Thanks in advance.
Regards,
A.Mohammed Rafi.

Hi,
Thanks for the help and the problem is solved.
Now I am facing another problem,
RMAN-03009: failure of catalog command on default channel
ORA-19657: cannot inspect current datafile D:\ORACLE\PRODUCT\10.1.0\DB_2\TC\EXAMPLE01.DBF
Could you please help me in this regard.

I want to backup my Mac to iCloud, but receive an error message recovery partition required. Is this an easy fix?

I want to backup my MacBook Pro to iCloud, but receive the error message "recovery partition required". Is this easy to fix?
Thanks for your time.

Sounds like your missing the partition. I have seen this before when I friend had a bad drive and took it in. Apple store replaced the driveamd installed lion but no partition. I had to reinstall lion from a full install DVD to build the recovery partition. Looks like you need to do the same. No data will be lost if you don't re-partition with the disk util. Just run the lion install from within lion and use the default. It will build the partition for you. Then re-run the apple updates for the 10.7.2 update which embeds the find my Mac part of iCloud in the recovery partition.
Good luck.

Unknown Error during Recovery - iPad no longer Recognized by iTunes

I have a 3rd Generation iPad which I was attempting to perform a factory reset. I received an "Unknown Error" during the process and from that point on I have been unable to get iTunes to recognize my iPad in recovery mode (or otherwise).
I have tried every thread on the subject, but I found one interesting thing. If I connect the iPad with the same cable, etc. to another computer it immediately recognizes it in recovery mode and offers to restore the iPad.
It seems like my computer is not recognizing the iPad because it was in the process of restoring the device when the error occurred. Does anyone know if there is a way to reset or fix this issue. I would prefer not to update iTunes and download both the new iTunes and iPad software again and use another computer if it is not necessary.
Any help would be appreciated.
Thanks

Hey KSHItunes,
That was a good test to try your iPad on another computer. It does seem to isolate the issue to something with your computer setup.
Although you would prefer not to update iTunes, there may be steps in this article which can help.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Please check it out.
Regards,
Nubz

Equium A100-549: Blue Screen error during Recovery CD installation

Hey,
I recently purchased a Toshiba laptop, everything worked perfectly until my laptop was attacked. I got rid of the virus and went to reformat due to lots of problems occurring. The main one being a error has accursed and "Blah Blah" program needs to close. Also i kept getting loads of errors.
http://aumha.org/win5/kbestop.htm
Them types.
Now then the Toshiba reformatting disk said simply put the disk into the CD drive and turn off. I did this, great. The toshiba disk said press F12 upon starting and click run the CD. The CD fires up and gets half way thro reformatting.
I suddenly get a blue screen error. I thought oh well ill reboot and carry on. This is where the problem started. Because i was half way thro deleting/reinstalling windows i was missing some files. I go to reinstall or try to use the Toshiba CD I get a blue screen error.
0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online Win XP Resource Kit article, or see Windows 2000 Professional Resource Kit, p. 1548.)
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).
Any ideas what i can do? I don't want to send the laptop back to Toshiba to fix however im thinking this is the only way out.
Please if repplying try to keep technical lanuage to a minnium. Many thanks, Dan.

Hi
Its very strange because the installation from the Toshiba recovery CD should works properly and without any Blue screen messages.
Usually if the BSOD appears if there is a serious software problem or something wrong with the hardware.
I dont think that the software on the recovery CD could be corrupt.
Did you try to install the OS from original Microsoft Windows CD? It would be very interesting to know if the blue screen will also appear.
However, I think your notebook is new and the warranty is valid. In my opinion you should ask the Toshiba service partner for the help because the guys could start the diagnostic test and could locate the fault.

Windows 7 Install error after Recovery

I recently had a HD crash on my SL410. I received a new hard drive and recovery disks from support. All appear to install OK until Windows 7 tries to start. I get to "Setting up for first use " and then get an error message that says the install did not work correctly and I need to start over. Requested new disks from support but had the same error. Any ideas on what is wrong?

performing clean windows installation may solve your issue.
also, when you see lenovo logo, press f8 , then select "las good configuration" or "fix start-up issue" from the menu.

RMAN Restore Error - media recovery requesting unknown log: thread 1 seq 7

Im using RMAN to copy a database to another server. The new server is IDENTICAL to the old one. By identical I mean it has the same sever name, ip address, operating system, Oracle version and directory structure.
The new server already has the instance created, (same name as the old server instance, paths etc)
The backup files have been manually restored to the new server, same locations as they were on the old one. ( RMAN did an automatic controlfile backup and also the archivelogs on the old server ).
Ive restored the control file on the new server from the RMAN backup pieces.
Ive catalogued the RMAN backup pieces on the new server.
I know the last sequence available in the archivelogs backup by running on the new server :
list backup of archivelog all;
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
5 14.43M DISK 00:00:03 11-MAY-11
BP Key: 9 Status: AVAILABLE Compressed: NO Tag: TAG20110511T163502
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
011_05_11\O1_MF_ANNNN_TAG20110511T163502_6WOC5833_.BKP
List of Archived Logs in backup set 5
Thrd Seq Low SCN Low Time Next SCN Next Time
1 2 550217 10-MAY-11 556559 11-MAY-11
1 3 556559 11-MAY-11 559776 11-MAY-11
1 4 559776 11-MAY-11 560093 11-MAY-11
1 5 560093 11-MAY-11 560794 11-MAY-11
BS Key Size Device Type Elapsed Time Completion Time
7 15.50K DISK 00:00:01 11-MAY-11
BP Key: 10 Status: AVAILABLE Compressed: NO Tag: TAG20110511T163653
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_.BKP
List of Archived Logs in backup set 7
Thrd Seq Low SCN Low Time Next SCN Next Time
1 6 560794 11-MAY-11 560851 11-MAY-11
So far its all going swimmingly well.
Now I want to restore the datafiles and recover. So I ran :
RMAN run { restore database; recover database; alter database open resetlogs; }
This gave me the output below which goes great but I get a final error, I think the error is because its looking for an archive log thats not in the backup set, but it should be. However, I think SCN 560851 is for a log that hadnt been created yet on the old server when the backup was ran ?
How do I address resolving the error ? Its worth pointing out log, "archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
\2011_05_11\O1_MF_1_6_6WOK1X4W_.ARC recid=10 stamp=750881741" isnt on the old server either which is why its not in the backup set.
I can do a alter database open reset logs but Id prefer to know why its failing.
Any help would be much appreciated.
RMAN> run { restore database; recover database; alter database open resetlogs; }
Starting restore at 11-MAY-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSTEM01.DBF
restoring datafile 00002 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\UNDOTBS01.DBF
restoring datafile 00003 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSAUX01.DBF
restoring datafile 00004 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\USERS01.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_.BKP
channel ORA_DISK_1: restored backup piece 1
piece handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_.BKP tag=TAG20110511T163507
channel ORA_DISK_1: restore complete, elapsed time: 00:00:55
Finished restore at 11-MAY-11
Starting recover at 11-MAY-11
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=6
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_.BKP
channel ORA_DISK_1: restored backup piece 1
piece handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_.BKP tag=TAG20110511T163653
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
\2011_05_11\O1_MF_1_6_6WOK1X4W_.ARC thread=1 sequence=6
channel default: deleting archive log(s)
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
\2011_05_11\O1_MF_1_6_6WOK1X4W_.ARC recid=10 stamp=750881741
unable to find archive log
archive log thread=1 sequence=7
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 05/11/2011 18:15:42
RMAN-06054: media recovery requesting unknown log: thread 1 seq 7 lowscn 560851
RMAN>
Edited by: user12173666 on 11-May-2011 10:28

You need to do incomplete recovery i.e. to ask RMAN to restore/recover to some specific point in time. This is usually done with some UNTIL clause or SET UNTIL statement. Example in your case:
SET UNTIL SEQUENCE 7;See http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta065.htm#RCMRF160.

HT201210 I attempted to update my IPAD to IOS6 and it failed, following this restore keeps failing with error stating recovery failed. I am stuck. I have reset several times and retried recovery mode only to get the same endless loop of trouble. Please

I tried to update my IPAD to IOS6 and it failed following this recover mode will not wortk either. I have reset multiple times and tried recovery again only to get the same error stating that recovery failed. The error states unknown recovery error. My system OS is up to date with OS X 10.7.5. Itunes is up to date with 10.7 (21).

Try:
- Powering off and then back on your router.
- The Additional Information paragraph of
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

HP Pavilion dv7-4269wm SMART Error and Recovery

My hard drive recently crashed after receving SMART errors for over 6 months. I am planning on ordering a new hard drive to replace it. Thankfully I was able to backup my computer about 2 weeks ago so I dont think I lost anything important. My question is regarding the recovery discs from HP. Although I am from the US, I am in the Netherlands Antilles at the moment and am having a hard time contacting an HP office to mail me the recovery discs. If I install a new hard drive and install Windows on my computer, is it necessary to have the recovery discs to make sure all the drivers, etc. are working or will my computer still work properly without them?

How are you planning to reinstall operating system?
To confirm the fail, do the hard drive - quick & extensive test from BIOS - System Diagnostics by pressing ESC key or F10 as soon as you power on the laptop.
If that fail & generate 24-character failure ID, is a hardware failure & replacement if the option left.
You can use Recovery media only if you buy & install a new HDD of capacity 750gb or higher.
For clean installation, that's not an issue.
You can download & save all the latest version of the drivers (check the date & version number) setup/.exe files in to USB. Insert USB & DVD simultaneously and there'll be option for loading driver during process of installation, just select the USB from there & it'll automatically install the storage drivers from it.
Later on after Windows installation, additional drivers could be installed from USB manually with a restart of notebook after each installation.
Related:
http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Error on recovery 0xe0ef000d

Similar Messages

Maybe you are looking for