Error on report server when try to execute

when i try to execute a report from FORMS i view this problem :
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle-HTTP-Server/1.3.28 Server at 69.134.144.123 Port 80

Mike,
how do you access Reports from Forms and can you run a stand-alone Reports from the browser URL (using the Reports Services and the Reports Services servlet rwservlet).
if you can't run a Reports directly then the problem is in teh confoguration itself and you should contact customer support via metalink.oracle.com
Frank

Similar Messages

Suddenly started getting error: Unable to start program 'DTS' when try to execute SSIS Package

Me and my team member suddenly started getting following error when try to execute SSIS Package in SSDT (VS 2010)
I searched everywhere but virtually no information available about this Error. Anyone has suggestion on how to fix this error?
NOTE: Tried to execute package from command line and it works...
Error starting debugging.
ADDITIONAL INFORMATION:
Unable to start program 'DTS'.
Operation not supported. Unknown error: 0x80040038. (Microsoft Visual Studio Debugger)
Thanks,
Nayan
<a href="http://binaryworld.net/blogs"> Visit My Blog</a>

Hi Nayan,
According to your description, the SSIS package works fine when you execute it with command line, when you execute it in SSDT, you got the error message: Unable to start program 'DTS'.
To troubleshoot the problem, I would suggest you to upgrade SSDT to latest patch. Please refer to the following steps:
Download and install the latest Microsoft SQL Server Service Pack.
Cumulative Update package SQL Server Service Pack.
Download and install Microsoft Visual Studio 2010 Feature Pack 2.
For more information about Visual Studio 2010 Feature Packs, please refer to the following document:
https://msdn.microsoft.com/en-us/vstudio/ff655021.aspx
If the problem remain unresolved, i would appreciate it if you could give us detailed information about the error, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

I've gotten an Error 150:30 message when try to start Elements 8.0 and asked to contact Adobe support. trying to do that led me here.

I've gotten an Error 150:30 message when try to start Elements 8.0 and asked to contact Adobe support. Trying to do that led me here.
Can I get some help here?
Thanks,
Harry

Then try the solutions here:
https://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
I know it says Creative Suite, but PSE is based on the same code so a lot of the same fixes work for both.

It tells me that there's an error on the server when i enter my password. what can i do?

it tells me that there's an error on the server when i enter my password. what can i do???

This is not an issue with Firefox, your message actually confirms this by the error you listed. "There was an error on the server" Firefox is only an internet browser basically, the connection to the internet & such local configuration is outside external from Firefox, the server is on the host side of the connection. It sounds like you have a bad connection between the server & your computer which Firefox has nothing to do with, rather it is your local network. I would actually check out Windows 7 VPN support, you need to setup a virtual private network VPN which is basically a secure connection stable enough to support the bandwidth required to facilitate the meeting.
This is why you are also having the problem with Internet Explorer as you need to correctly configure a VPN connection via windows if your connection supports it.

Error Creating Reports Server Components when installing 11.1.1.2

Hi There
I'm trying to install a A WLS(11.3.2) and Forms/Report 11g (11.1.1.2 bundle) on a Linux RedHat 5.5.
But when the configuration tools of Forms/Reports is trying to create the reports server I got the following error:
Executing Task: Creating Reports Server Components
ALERT: Invalid component name: ReportsServer_fd-red03.in.fd.dk_asinst_1 (Component name must begin with an alphabetic character; may only contain alphanumeric characters, or the underscore (_) or hyphen ( -) characters; and must be 4 to 30 characters long.) Continuing anyway.
progress in calculate progress4
Executing Task: Executing: opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
GJS: About to call startOpmn
GJS: Entered startOpmn
*************** Trying to Start OPMN **************
*************** Executing Command **************
/home/oastest/Oracle/Middleware/asinst_1/bin/opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
As I read the error message is the component name illegale and I guees that whats cause the Report Server to faile.
But how does the install tool figure out the name: ReportsServer_fd-red03.in.fd.dk_asinst_1 ?
And how do I prvent it from happens again.
Note: "fd-red03.in.fd.dk" is the full hostname
Regards Hans S

Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
Thanks,
Pablo

'Cannot obtain error message from server' when trying to use ODBC

Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.

Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

Error Installing Reporting Server

Hello,
I am trying to install SCOM 2007 R2 Reporting Server so I can upgrade to SCOM 2012. I get this error:
Error 26204 Error-2147217900 Conversion failed when converting from a character string to uniqueidentifier
What is the issue with my install? I am running SCOM 2007 R2 CU7 on a Windows Server 2008 R2 SP1 with SQL Server 2008 R2 SP2.

If its reporting installation that its failing on, you might want to check this:
http://support.microsoft.com/kb/944347
From here:
http://opsmgr.wordpress.com/2007/05/14/recieve-error-2147217900-when-installing-scom-rms/
It could be you account doesn't have write access to the scom database (you can always try db_owner too)
And there is this too:
http://blogs.technet.com/b/edwalt/archive/2007/08/24/1818438.aspx

Error In report Server

Hi,
I want help, my report server 10 G is running very well. But when I run a report with many rows,it was take several time to run.And I have this error.
UTL_HTTP.REQUEST_FAILED; WEB SERVER IP ADDRESS = myadresse ERR : ORA-29259: end-of-input reached ==> <ORA-06512: at "SYS.UTL_HTTP", line 1674
ORA-06512: at "POWERCARD.PCRD_REPORT_TOOLS_1", line 339
<ORA-29273: HTTP request failedORA-06512: at "SYS.UTL_HTTP", line 1674
ORA-29259: end-of-input reached>
Please Help Me !!!

Please can you help me, is a serious problems and i don't have solution.
Regards

Error in Kpro server when checking in originals from NW Portal

Hi Experts,
I am not able to check in originals in my NetWeaver Portal.
When I try to save I get the follwoing error message:
- Error in Kpro server
But if I try in to check in the same original in the PLM system through SAP GUI it works just fine.
Any thoughts about what I can do?
Thanks in advance,
Mikael

Hi Mikahel,
I have tried changing the whitelist and now I am able to check-in document to a content server storage category but not able to display it..
Could you please tell waht additional setting you have done with data carrier?
We have maintained PC and Default front end..
Regards,
Aby

Error "Invalid Report Object" when running any CR

Hi, I have installed BO XI V3.1 and upgraded to 1.4 level.
However when logged into the infoview app, if i browse to any 2008 report i have uploaded into the enterprise system and double click to run i get the error "Invalid Report Object".
This is also true if i try to run any report in the Public Folders \ Report Samples folder.
Nothing will display for me but they run fine in CR 2008, just not via the web tool.
Any help on this will be much appreciated.
C.

Hi,
Is this issue after you have upgraded to 1.4 or was this issue occurring before?
Since the reports are running properly in the designer please try to do following steps:-
1) Open the report in the designer which is not working in enterprise
2) Refresh the report in CR designer
3) Save the report back to the enterprise and make sure save with data is checked.
4) Now open the report in the Enterprise and check it works or not.
The reason of doing this is that to generate new PID's for the reports if after the upgrade the PID's have changed or has became corrupt.

Error on Production Server when php service is called.

The web application runs fine on my development machine but on the production server it gives me the following error and no responce when a phpservice is called.
error:
Send failed
Channel.Connect.Failed error NetConnection.Call.BadVersion: : url:
'http://ipaddress/Project/public/gateway.php'
Network Monitor:
Development Machine:
Windows 7
MySQL 5.5.16
Zend Framework 1.10
Production Machine:
Ubuntu 11.10
MySQL 5.1.58
Zend Framework 1.11
I followed the following steps to deploy the application on production server;
1. created identical database with same credentials on the production server
2. confirmed that my php service works on the server by manually navigating to the php file and printing the data retrieved on the page
3. modified the paths in amf_config.ini to reflect production server
[zend]
webroot = "/var/www"
zend_path ="/usr/local/zend/share/ZendFramework/library"
library ="/var/www/Project/library"
services ="/var/www/Project/services"
[zendamf]
amf.production = true
amf.directories[]=Project/services
4. initialized the class by adding
// Initialization customization goes here
_serviceControl.endpoint = "http://ipaddress/Project/public/gateway.php";
in the .as file for the php service
I have also found from my zend server logs that when my php service is called its throws the following error:
PHP Notice: Undefined index: HTTPS in /usr/local/zend/share/ZendFramework/library/Zend/Amf/Response/Http.php on line 59
I doubt that there is anything wrong in the deployment process but please do let me know if you could think of something i might have missed.
The other thing im wondering is the php notice if it were to be caused due to different Zend Framework versions!
Kindly advice

EGJ Steens has post a fix at http://forums.adobe.com/message/4097998#4097998#4097998/Using Flash Builder
Zend framework 1.11 added an extra function in the Http.php file (which was mentioned in the post) and was fixed as follows
protected function isIeOverSsl()
        $_SERVER['HTTPS'] = 'off'; //Adding this line fixed the issue
        $ssl = $_SERVER['HTTPS'];
        if (!$ssl || ($ssl == 'off')) {
            // IIS reports "off", whereas other browsers simply don't populate
            return false;
        $ua = $_SERVER['HTTP_USER_AGENT'];
        if (!preg_match('/; MSIE \d+\.\d+;/', $ua)) {
            // Not MicroSoft Internet Explorer
            return false;
        return true;
My concern is if i wish to secure my application with ssl using HTTPS will this prevent me from doing so.
Any Pointers Anybody?

Error Starting Report Server Services

Hey all
I have Install 9iAS it was working fine but When I Restart server mechine Report services unable to start
Give error:-
"Windows could not start the ORacle Reports Server [Rep60_ORA] on local Computer.
for more information, review the system Event Log. If this is a non-Microsoft Service,
Contact the service vendor, and refer to service-secific error code 186."
See my report server log file:-
E:\oracle\806\REPORT60\SERVER\Rep60_ORA.log.
*** 2004-02-03 23:04:17 -- Server is starting up.
*** 2004-02-04 03:58:49 -- Server started up an engine. (Rep60_ORA)
*** 2004-02-04 04:28:57 -- Server shutting down an engine. (Rep60_ORA)
*** 2004-02-04 04:45:00 -- Server is starting up.
*** 2004-02-04 04:45:00 -- Daemon failed to listen to port
*** 2004-02-04 04:55:55 -- Server is starting up.
*** 2004-02-04 04:55:55 -- Daemon failed to listen to port
*** 2004-02-04 04:58:46 -- Server is starting up.
*** 2004-02-04 04:58:46 -- Daemon failed to listen to port
*** 2004-02-04 15:53:35 -- Server is starting up.
*** 2004-02-04 15:53:35 -- Daemon failed to listen to port
Have anybady can solve this problem?
Thanks

I think your newly created report90 listens on the same port as your old rep60 service. Uninstall this service and install rep60 with a different port number or let reports 90 use a different port number

Random 401 errors - Kerberos + Reporting Server

We have a portal with Reporting Server in SharePoint mode and deployed our reports to SharePoint. Reports run in integrated security mode, we configured Kerberos. (Reporting server configured as RSNegotiate,
added SPN's, etc.)
Everything seems to be working fine.
However, if two users access the same RDL at the same time (just opening the RDL from the Document library), the second user can get a HTTP/401 from SharePoint, showing the default SP2010 error page with correlation ID and so on. No errors in the ULS log.Error
disappears after refresh.
This error is always showing up when Kerberos was not configured correctly. In this case no error in ULS or event log.
If we configure Reporting Server as RSKerberos instead of RSNegotiate, we don't get a 401, but the report of the other user! So,user A has permissions on report X, opens it. At the same time user B without permissions opens report X and sees exactly the
same as user A! So, this is a security hole if we configure it as RSNegotiate.
No proxy server is used. We changed EnableAuthPersistence to FALSE, just in case.
Anyone can point me in the way where to look? The user credentials / Kerberos ticket seem to be cached by SharePoint.

Hi Stacy, thanks for your reply.
I tried all different combinaties of those settings, but nothting solves the problem. The fact that I am possible to see anyone else his reports, is a big security hole, no matter how I configure it, right?
If I configure RSWindowsExtendedProtectionScenario
to Direct, I get HTTP/401 all the time. Any other settings changes nothing, still one HTTP/401 when 2 users access report at same time (AuthenticationType = RSNegotiate) or 2 users see each other's report (AuthenticationType = RSKerberos).
It seems indeed something gets cached, but I have no idea how to fix it. Do you, or anyone else, know where to look now?

Error: Oracle Reports Server CGI

I am reciecing the following error when attempting to run a report from a URL using the RWCGI60 command. Oracle Reports Server CGI - Unable to communicate with the Reports Server. The following is the url I am trying to access. http://hostname/cgi-bin/rwcgi60.exe?report=V2JOURNAL2.rdf+userid=id/password@database+server=REP60_USTRSPOM001+desformat=pdf+destype=cache.
null

hello,
looks like a configuration issue. check you settings in TNSNAMES.ORA
also check your names.default_domain in SQLNET.ORA. if you do not specify a domain it will add the default domain to the servername. i would suggest to always use a name with domain.
regards,
the oracle reports team

Error on report server when try to execute

Similar Messages

Maybe you are looking for