Error on saving the servicee order ( Error while copying doc into ECC)

Hi,
On saving the service order I am getting an error sayin : Error occurred while copying the document into ECC. I have checked the detailed error log on WEBUI. It is showing the below:
"Enter a (default) purchasing group for material group 900000000 (Notification E CRM_SRV_LOG_EXT_OLTP 002)"
Could you please let me know, Where do we maintain the above data.
Thanks,
Sandeep

I just added some fields to free characterstics.
Actually in Transport Connection n RSA1, its shown that the query is saved in a transport number. But other user can edit the query even if no task is there in his name undr that transport. Task in my name is there but I am not able even to save the query.
If its already in transport , how another user can edit and save it.
And if it is getting saved to $ Tmp, why is it so, as it is already in a transport request.

Similar Messages

  • Error While saving the Production Order

    Dear Experts
    Pls let me know why am getting the below error while saving the production order after release..
    PSFC_STD_LAYOUT does not exist
    Message no. SSFCOMPOSER004

    Dear,
    Please check have you assigned the scheduling profile in work scheduling view of materail master?
    Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
    Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
    Regards,
    R.Brahmankar

  • Run time error while saving the production order in CO02

    HI Experts,
    While i am releasing and saving the production order the system is giving the runtime error. Please help.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_SLD_API_EXCEPTION
    Error analysis is
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SLD_API_EXCEPTION', was not
    caught in
    procedure "GET_ACCESS_DATA" "(METHOD)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Internal error in method
    A Quick response is required.
    Regards
    Dinakar Sarma

    Hi,
    Please check below  link for your issue , it may useful
    http://forums.sdn.sap.com/thread.jspa?messageID=10815298#10815298
    Regards,
    Ram

  • Error Occurred while saving the purchase order

    Dear Experts,
    While changing PO and Schedule Agreement using T.Code : ME22, ME32 we are facing below error message.
    Problem occurred While altering and saving the purchase order.
    Error message FGV004 - "SYST:date 00.00.0000 is not permitted" is generated
    when modifying an Scheduling Agreement that does not have a Delivery
    Schedule using ME32L.
    Please Kindly help to fix this error as soon as possible.
    Thanks in Advance.
    Prasath Manoharan

    hi,
    In addition to above..
    I also checked for the SAP note...
    It shows only one note regarding MM...
    pls check the sap note 355827..
    As per this note you need to add few corrections...pls take help of basis consultant..
    Regards
    Priyanka.P

  • Send Mail to Customer while saving the Sales Order

    Dear Friends,
    My Requirment is to send the mail to Customer automaticaly when create any Sales Order.
    While sending the mail given three points reqired.
    1.     Send the attachment of Order Conformation along with the mail.
    2.     There must be The title text as "Order Confirmation refrence of your PO <Customer PO No> <PO Date>"
    3.     There must be some body text like some terms and conditions with variables of Order data.
    Can any body help me one this step by step.
    Kindly suggest me how to do this.
    Thanks in Advance.
    D Tarun Kumar
    Moderator message : Spec dumping not allowed, duplicate post. Thread locked.
    Edited by: Vinod Kumar on Jul 12, 2011 11:30 AM

    While saving the sales order through Va01 and Va02 and email has to send

  • Receive error: There was an error while copying to the Clipboard. An internal error occurred.

    I receive the message "There was an error while copying to the Clipboard. An internal error occurred." when I highlight anything and copy to the clipboard. I've searched and found others with the same issue, but they were either on an older OS, Acrobat ver, or their issue was intermittent. My issue always occurrs and I cannot copy anything to the clipboard.
    I'm running Win 7 Ultimate x64 SP1 and Acrobat Pro 9.4.4. Any suggestions would be appreciated.
    Thanks,
    RJ

    Hi MelSchultz,
    Thanks for your post. However, this Forum is meant to discuss
    issues related to acrobat.com and not acrobat. To post an issue
    related to acrobat please visit the acrobat forum :
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
    You may also open a web case with Adobe Support. To do so,
    please visit the following link :
    https://www.adobe.com/cfusion/support/index.cfm?event=portal

  • Different message in va01: Defect in ECC6 server while saving the sales order .

    Hi ABAP gurus,
    I am in to upgrade Project In ECC6 server I am getting the different message when saving the sales order in va01 compare to  old sever(4.7) .
    I have to make it to the same message as it is in the 4.7 server.
    plz help me .
    Regards,
    vanamaala kashavena

    Hi,
    IF xvbap-uepos IS INITIAL AND
            xvbap-zzhrs_conf <> 'X'.
            MESSAGE ID 'ZOTC' TYPE 'E' NUMBER '067' WITH
            'Please select Hours Confirmed in Additional data B'(302) 'for item'(303) xvbap-posnr.
          ENDIF.
    this is the code in the  PARTICULAR INCLUDE PROGRAM .
    this is same in both the system ,but in ecc6 server,in message
    popup it is not giving 'Please select Hours Confirmed in Additional data B' .
    it is giving ORDER QTY FORMAT PERIOD (ITEM NUMBER(0010))
    Regards,
    vanamaala k

  • Background job finishes but error Error While Updating Material into Standard SAP5678

    Dear
    we run background job which finishes successfully but when we sqw logs it shows
    Error While Updating Material into Standard SAP5678
    Kindly share the reasons
    Regards

    This is an ERP Upgrade space and you should consider raising threads in the right space for prompt replies. Next time consider using SAP NetWeaver Administrator space for issues like these. Also you should consider closing your previous thread with the correct answer for future reference.
    What I see is a custom job. You should check what the job does and also the trace file of the work process and the consult with the application team or the developer for more information. Unfortunately with that screenshot there is nothing much we can advice you.
    Regards
    RB

  • Error while copying page template!

    Copying of a simple page template fails in Portal 10.1.2 with the following error:
         Internal error (WWC-00006)
    Error while copying page. (WWC-44262)
    An unexpected error occurred: ORA-20100:
    ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
    ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
    ORA-01403: no data found (WWC-44088)
    An unexpected error occurred: ORA-20100:
    ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
    ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
    ORA-01403: no data found (WWC-44082)
    An unexpected error occurred: ORA-20100:
    ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
    ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
    ORA-01403: no data found (WWC-44082)
    An unexpected error has occurred (WWS-32100)
    ORA-1: User-Defined Exception (WWC-36000)
    No data found (WWS-32101)
    I already had this error in Portal 9.0.4.

    Hi Christian!
    I already opened a TAR. As (according to the Portal docs) exporting Portal applications to future versions is not supported, waiting for another Portal release would mean starting our applications from the scratch. For this reason, bugfixes in future releases are of no really use in our case, and we definitely HAVE to find a solution for this quite crucial problem.
    But thanks for this information.
    Eckhard

  • Error while uploading file into KM

    Hi Experts,
    I m getting error while uploading file into KM. Its throwing an error message like " Syngenta-POC.doc" does not exist, or file is empty; you cannot upload empty files"
    please assists me.

    Shantanu,
    Please check the files which you are upload is empty or unknown format. If everything seems valid then try to check for the corresponding SAP Note in service.sap.com
    Ram

  • New-AzureDeployment - Error while copying content to a stream

    Hi All,
    I am trying to deploy a packages using the Azure Powershell Cmdlets.
    Each time I try to deploy a particular package, I get the following error message..
    New-AzureDeployment : Error while copying content to a stream.
    At line:1 char:1
    + New-AzureDeployment -DoNotStart -ServiceName $strStagingCCPDeploymentServiceName ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [New-AzureDeployment], HttpRequestException
        + FullyQualifiedErrorId : System.Net.Http.HttpRequestException,Microsoft.WindowsAzure.Commands.ServiceManagement.HostedServices.NewAzureDeploymentCommand
    Looking at the inner exception I am getting
    Unable to read data from the transport connection: The connection was closed.
    The package itself is only 80mb and uploads to my blob storage successfully however when it tries to deploy using my config file the error occurs.  The same config file works fine if I use the Azure Website to deploy the package, rather than the cmdlets
    and I can deploy other packages successfully using PowerShell and using Visual Studio.
    Thank you for any help you can provide.

    Hi,
    This seems to be a network issue, but it's quite strange as you can deploy the package from Visual Studio. Could you please try it on another machine (in another network environment if possible)? Also, can you try
    to write a program and call the management API (http://msdn.microsoft.com/en-us/library/windowsazure/ee460813.aspx) to deploy it?
    Best Regards,
    Ming Xu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error while copying data from infoprovider to planning area

    Hi,
    Error for COM routine using application program (return code 40,075)
    Message no. /SAPAPO/OM102
    Diagnosis
    An application program has called a COM routine. During the process, an error occurred.
    I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
    How to resolve this?

    Hi,
    Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
    Below are the programs for the same.
    /SAPAPO/TS_lcm_cons_check
    /SAPAPO/TS_PSTRU_TOOL
    /SAPAPO/TS_PSTRU_CONS_CHECK
    Regards
    Kishore

  • Error while copying and pasting group of activities

    Hi,
    I am getting an error while copying and pasting a group of activities. Can anyone let me know why I am getting this message.
    type : EStringListError
    Event Code : SLDNA-0655-B
    Description : String list does not allow duplicates
    thank you.

    I had the same error and reported it to Oracle. They requested an XER copy and I am waiting for thier response. This problem is for that particular project only. To work around it do the following:
    Create a new project, open both projects, go to wbs view, copy all wbs's from the correpted project to the new project. The new project will work fine and get rid of the correpted one.
    Good Luck.

  • Error while copying profile...

    Error while copying profile from the default profile...
    runtime error- DBIF_RSQL_INVALID_REQUEST
    pls help..

    Irfan,
                You check weather new role name is in Z,Y name space or not?, check the same thing in other clients as well. If you are in windows , then your server mey need reboot because i faced similar problem but sorted after reboot.
    Regards,
    Hari.
    PS: Points are welcome.

  • Inserting Pricing condition in Sales order when saving the sales order

    Dear ABAPers,
           My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
    In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
    How to do this.
    Thanks & Regards,
    Ashok.

    Dear ABAPers,
    I have Solved this Problem.
    Thanks & Regards,
    Ashok.

Maybe you are looking for