Error on Send Port configured using HTTP adapter

Hi All,
For Load balancing purpose we have created new host and host instance and changed send handler for send port configured using
plain HTTP adapter.
We are getting below error after change:
A password is mandatory if UserName is specified
Parameter name: Password
Please advice.
Thanks
Pooja Jagtap Software Engineer KPIT Cummins

Have you updated the password for your Host instance . Try restarting your host instance once .
Thanks
Abhishek

Similar Messages

Want to send information in Header dynamically using HTTP adapter using post method

Hi ,
I have a requirement to send below information in http Adapter header dynamically using post method. which will be authenticated by third party system.
Authorization : WSSE realm="SDP", profile="UsernameToken", type="AppKey" X-WSSE : UsernameToken Username="XXXX", PasswordDigest="Qd0QnQn0eaAHpOiuk/0QhV+Bzdc=", Nonce="eUZZZXpSczFycXJCNVhCWU1mS3ZScldOYg==", Created="2013-09-05T02:12:21Z"
I have followed below link to create UDF
http://scn.sap.com/thread/3241568
As if now my third party system is not available while sending request I am getting 504 gateway error. is there any approach I can validate my request is working fine?
Regards,

Hi Abhay,
Correct me if I'm wrong but I think WSSE requires a SOAP Envelope. If that is the case, there are two approaches: the first one is to use SOAP Axis and the second one is just to build SOAP Envelope via Java mapping.
You also need to test it successfully externally, capture the request and replicate it in XI.
Hope this helps,
Mark

WSRM Adapter replaced with soap in PO7.4. Getting error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"

Hello All,
We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
"soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with parameters
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
and
xmbws.No SOAPIgnoreStatus = true
but not successful.
Please help me. I got stcuk here.

Hello Jannus,
The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
Please let me know the exact difference between soap and wsrm functionality in receiving end.
By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
Then i used message transform bean, but not successful.
Regards,
Ch.Venkat.

Can I get a response back when I use HTTP adapter

Hi ,
I am doing a integration between SAP and ThirdParty Product using PI 7.1.
The scenario is ThirdParty -> PI -> SAP ,using HTTP adapter between ThirdParty and PI , and IDoc adapter between SAP and PI.
So,its a HTTP sender and IDoc receiver.
So I was just curious to know if the IDoc posting failed in SAP ,can I send a response from SAP to Thirdparty regarding the failure along with some error message.
Thanks for your responses.
Venu

Hi,
It may lead to some timeout problems if you design your scenario as synchronous i.e sending response back to HTTP..
as SAP may take time to process idoc and need to provide response back to PI ..by that time the connection may become invalid and thirdparty may receive response as timeout error...
As anyway PI has the option of Alert managements..you can trigger the error mail to the third party recipients for letting them the status...
HTH
Rajesh

3rd party to sap using HTTP adapter

Hi Folks,
I'm sending some IDOC to sap from the 3rd party. I have to use HTTP adapter as sender and IDOC as receiver adapter.
Can you please suggest me how to configure teh sender side. As I know there will be no such configuration for the sender adapter as it is HTTP then how the HTTP adapter will get the data sent by the 3rd party and how it will pass it on to the idoc adapter ?
Regards....

If you like to have more details about the http url
then refer the below link
http://help.sap.com/saphelp_nw70/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
Rajesh

XI message with Attachment using Http Adapter

Hi ,
We are using XI/PI 7.0 with Sp09 and Sender Application is SRM and Receiver is Ariba MarketPlace.
We are trying to Send PO with Attachments like Word, PDF etc from SRM to Ariba using Https adapter and from SRM we are using ABAP Proxy. When I did the testing with out any special config, I was able to send the attachments (I can see word doc as part of the payload-attachment) to XI from SRM but this attachment is not going through https adapter from XI to Ariba?
I have read some posts on this but I could not find the answer for my situation. One of the solution is that we can use SOAP adapter but we don't want to use Soap for some reasons.
Please give your thoughts.
Thanks in Advance.
-Laxman

> Thanks for your replies, I am little confused, based
> on your references http can't support attachments.
That is true.
> Also sap help link says Http adapter doesn't support
> attachments and XI adapter also doesn't support.
That is not true. XI adapter (in fact we do not talk of an adapter) supports attachments.
> It means Proxy also shouldn't support because proxy is
> nothing but XI adapter.
This is true, ABAP or Java Proxy are like XI adapter. Therefore it supports attachments.
> But When I send PO with attachments from SRM using
> Proxy connection I was able to pass through XI. So
> how proxy was able to send the attachments and this
> is contradicts to the help documentation.
The online help is wrong.
> We don't want to use SOAP because we are already
> using https adapter and this scenario is in
> production also if we go with SOAP then we have to
> re-import the digital certificate in Java Engine for
> SSL. Attachments are the new enhancement only.
I do not see another solution besides using SOAP adapter in so-called non-SOAP mode. Yes you have to reimport the certificates to J2EE stack.
Regards
Stefan

Scheduling of message using HTTP Adapter.

Hi All,
The scenario is SAP ECC to SAP PI to SAP MII, and we are using HTTP adapter on the receiver side.
The requirement is that, the messages should be sent to MII in the order in which ECC sends it to PI.
Can anyone please help me on how this can be achieved.
Thanks and Regards,
NehaSingh

Hi Neha,
If it is IDOC to HTTP scenario and you use EOIO also you will face a big problem.
It will not work. I have faced the same problem.
Suppose at a same time ECC genaretes 100 IDOC then then in intregration engine it may not reach at same sequecnce as IDOC no.
You can go with IDOC packageing in this case in ECC.
In ECC send the IDOCs as packages.
Also in PI create one Sender IDOC channel with package size.
then before your actual mappinng create a simple mapping program to sort the IDOC based on IDOC number. Then do the actual mapping.
Dont forget to create an Unbounded IDOC structure as source side in Mapping,
Edited by: Debashish on Jul 1, 2011 2:29 PM

Using HTTP adapter with no namespaces

Hi,
Is there anyway to use HTTP adapter when the provider does not accept the namespaces. The HTTP binding wizard requires a targetnamespace to be defined in the request and response xsds that we have to use.
Thanks & Regards
Siva

Bernd we are trying to do the same thing only with the soap adapter. I'm convinced that no one really knows how to do it. We can't even find an SAP CONSULTANT that has done it .. at any cost!
If you hear anything good .. please let me know - my email is [email protected]
I think the nightmare is coming in because when SAP bought the j2ee ( application server ) they never really have integrated it so it's very confusing if the settings need to be done on the ABAP side or the J2EE side via visual administrator. In addition most Basis guys are only experienced in the ABAP side and not the J2EE.

Maximum file size data that can be send to MQ using mq adapter

Dear All,
What is the maximum file size data that can be send to MQ using mq adapter ?
The file can be csv, fixed , xml.
Please let me know if anybody is aware of any limitations
Best Regards
Arc

If you are on 10g then you are looking at a limit of 7MB, although any messages over 1MB will require some tuning.
You can integrate using the native schema, or xml so you can use csv, fixed length, and xml files.
cheers
James

Sending empty files using SFTP Adapter

I am trying to send empty files using SFTP adapter. The interface has to send the file whether its empty file or containing data using SFTP adapter. I am using BizTalk Server 2013 R2. Is it a bug or the hotfix is already there for this issue.

The issue here is not your SFTP not able to send 0KB files, but the file receive adapter that is receiving the file. The file adapter deletes 0 KB files and doest not transmit it further.
If u have a ftp receive for example you should be able to send 0KB files.
If u have a custom file receive adapter , is it handling 0KB files ?
Regards <br/> When you see answers and helpful posts,<br/> please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Is it possible to use HTTP adapter?

Hi All,
interface will be trigged by ECC to run once a day. The purpose of this interface is to update ECC exchange rates with the exchange rates file provided by the Central Bank of Brazil.
The file is available in the web site: http://www. XXXX and its name changes depending on the date.
The format is YYYYMMDD.csv. Example: 20100419.csv
The scenario will be Abap proxy <-> PI <-> website (Http / soapu2026 whatever) (Syncronous as the date must be sent to build the correct filename).
My main question is: how can I pick up this csv file from the website? Is it possible to use HTTP adapter?
Thanks,
Satya Kumar

Hi ,
i am not sure about this,i wolukd prefer developing JAVA Proxy or File Adapter . try this code it read the data from website, try in you stand alone application,it is able to read or not.
you will face two problems,you have to convert CSC file to XML it is not possible in HTTP Adapter,
import java.lang.*;
import java.util.*;
import java.net.*;
import java.io.*;
class URL2AC
        public static void main(String args[]) {
       try {
          URL url = new URL("http://www.XXXXXXX.com/raj.txt");
          URLConnection uc = url.openConnection();
          BufferedReader in = new BufferedReader(new InputStreamReader(uc.getInputStream()));
          while (in.readLine()!=null)
               System.out.println(in.readLine());
       catch(Exception e) {
          e.printStackTrace();
Regards,
Raj

Configuration of http adapter to reach https-URL

I want to configure a http Receiver Communication Channel that is supposed to call a web service with the following URL: https://api.sandbox.ebay.com/ws/api.dll.
I did the following set-up in the http Adapter:
Addressing Type: URL Address
Target host: api.sandbox.ebay.com
Service Number (Port):443 (-> Standard https Port)
Path Prefix: /ws/api.dll
I startet the process and received the following error message in XI:
"ERROR: The requested URL could not be retrieved. While trying to retrieve the URL: "http://api.sandbox.ebay.com:443/ws/api.dll?"The following error was encountered: Zero Sized Reply. Squid did not receive any data for this request."
It seems it is calling the URL via http, not with https.
Can someone tell me how to change the configuration of the http Adapter that it uses https?
Thanx in advance.
Alex

Hi Alexander,
Create RFC Destination with Connection type G using Tr. Code SM59 in XI System and enter all the parameters like TargetHost,(Target System), ServiceNo(external port)and path prefix. In the tab Logon/Security enter the login info and enable SSL. Run the transaction STRUST to setup client PSE.
For more info on this refer to help.sap.com at the following <a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/content.htm">link</a>.
In the HTTP Adapter communication channel config in XI ID, Select the Addressing Type as HTTP Destination and in the HTTP Destination field enter the HTTP Destination name you created in the above step.
Hope this helps.
Regards,
Sam Raju

Configure plain http adapter for receiving message from an external system

Hi,
we use Pi/700.
Now I have an external system and I have to use HTTP (plain) to send messages to XI (via plain http adapter).
I have no experiences with HTTP!
In the external system I can only configure "URL, Username, Password" for sending messages - that's all!
What do I have to configure in XI (communication channel, abap-stack, java-stack,...)?
I don't know the URL of my XI-system. Is there an transaction code to get this information?
Why do I need a Username/Pasword?
For testing I can use a "http-post test tool" I found here in this forum.
Thank you all for any help!
Regards
Wolfgang

Hi Hummel,
In Exteranl System u have to use these values
name="myhost"      value="xiserver"
name="myport"      value="8000"
name="mysystem"    value="XY_BSservice"
name="myinterface" value="Order_out"
name="mynamespace" value="urn:xi:hcl:powebapp"
name="myqos"       value="BE"
name="myclient"    value="300"
name="myuser"      value="XYZCLNT"
name="mypass"      value="xiuser"
Here My system is the Business service created in Integration directory of XI, Interface is the one created in Integration Repository (This is Outbaound from external sys to XI)
In XI U have to create
Data Types : 1) Source Structure data type(from extenal sys)
             2) Target structure (where u want to send from XI)
Message Types : 2 with above DT's
Message Interface: 1) Outbound, Async (Order_out)
                   2) Inbound , Async (for the target sys)
Then Message mapping and Interface mapping as usual..
And in ID u have to create 2 services one is XY_BSservice for sending system and the other is for receiving system...
For sending system no communication channel required...
Hope u will get idea from the above..
Need any further u r welcome..
Regards
Sridhar

How to Configure Reciver HTTP Adapter

Hi,
i am doing Proxy-HTTP syncronous scenario.
Proxy will fetch XML file located in one server.
(example: www.yahoo.com/exchange_rate.xml)
i have following problems.
1. How to configure the Reciver HTTP Adapter.
2. What should I use in Address Type.
HTTP Destination or URL Address.
3. If I use HTTP Destination , The length of the field is very short to accomodate complete address.
4. If I use URL address, what should I put in all the fields , like Target host, Service Number, path.
I have URL , something like this, www.yahoo.com/exchangerates.xml
I dont know what to put in Target Host, service name and path.
Please help. thx. BD.

Hello,
if you use a HTTP-Destination it uses a rfc-destination.
So you configure first a rfc-destination (in sm59 of type G)
and name it for example RFC_EXAMPLE and then you
use this name for the HTTP-Destination in your adapter.
if you use the url
Target host:
- you can use the ip
Service Number:
- that means the port you want/must use
path:
- in your case: /exchangerates.xml
Regards
Patrick

Error while invoking custom API using Database Adapter

Hi,
I've a requirement where in I need to fetch the data returned by a recordtype of a custom API. I've implemented this by invoking the custom API using Database Adapter. I'm facing a problem while performing this.
The custom API holds the signature as:
PROCEDURE EMP_DET
Argument Name Type      In/Out Default?
P_DEPTNO NUMBER IN
L_LINE_TBL TABLE OF RECORD OUT
I've a schema with which it needs to be validated. It looks like:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:po="http://www.mycompany.com/ns/sales" targetNamespace="http://www.mycompany.com/ns/sales" elementFormDefault="qualified">
<element name="EmployeeDetails">
<complexType>
<sequence>
<element name="EmpNo" type="integer"/>                    <element name="EName" type="string"/>                    <element name="Job" type="string"/>                    <element name="Mgr" type="integer"/>                    <element name="HireDate" type="date"/>                    <element name="Sal" type="decimal"/>                    <element name="Comm" type="decimal"/>               </sequence>
</complexType>
</element>
</schema>
I did a transformation to the above stated Emp.xsd with the xsd created for my custom API by the BPEL process. I could create the process and deploy successfully, but while invoking I get the following error. (I'm using BPM 10.1.3.1 with JDev 10.1.3.1)
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>6502</code>
</part><part name="summary"><summary>file:/D:/OraBPEL/bpel/domains/default/tmp/.bpel_my_poc_1.0_16c5d0f7b937c780d27d8975726a15cb.tmp/emp_details.wsdl [ emp_details_ptt::emp_details(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'emp_details' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the SCOTT.BPEL_EMP_DETAILS.EMP_PKG$EMP_DET API. Cause: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
[Caused by: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
; nested exception is:
     ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the SCOTT.BPEL_EMP_DETAILS.EMP_PKG$EMP_DET API. Cause: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
[Caused by: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>
Internal Exception: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
Error Code: 6502</detail>
</part></remoteFault>
Can someone let me know as to why I'm getting this error? Also lemme know if such an approach is valid to do, if not please suggest me alternate methods to do this.
Thanks in advance,
Gayathri

The 'numeric or value error' is one we have seen many times. The problem has been identified and fixed. Refer to this thread for more information.
Issue with DB Adapter - ORABPEL-11811

Error on Send Port configured using HTTP adapter

Similar Messages

Maybe you are looking for