Error on sending email: this._attachmentWidgets

Error on sending mail. Under Opera 12.12 and Windows 7, whenever I send a message through Verizon's web email, I get the message "Cannot convert 'this._attachmentWidgets to object"
I get this message with or without attachments on the email.

I have the same problem with Opera 12.15
All the Opera 12.xx versions are similar.
After my email is sent.
A Verizon java pop-up displays:
Cannot convert 'this._attachmentWidgets' to object
But the email is sent and I have tried stripping some of the codes.
Looks like VZ does not like Opera

Similar Messages

  • Error while sending email to external mail - Urgent

    Hi All,
    I am getting error while sending email with attachement. The Error code is 02.
    I am not able to identify the error. bold Please help me in solving this problem.
    Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
    the code i am using is :
    REPORT YVR_F MESSAGE-ID XX .
    TABLES : EDIDC, EDIDS, EDPAR.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
    PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
    SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
                     S_MESTYP FOR EDIDC-MESTYP,
                     S_CREDAT FOR EDIDC-CREDAT.
    SELECTION-SCREEN END OF BLOCK B1 .
    PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
               P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
               P_DELSPL  AS CHECKBOX,
               P_ONLINE NO-DISPLAY.
    DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
    LINE.
    DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
    DATA : BEGIN OF TB_ED OCCURS 0,
             SNDPRN LIKE EDIDC-SNDPRN,
             LOC    LIKE ADRC-BUILDING,
             DOCNUM LIKE EDIDC-DOCNUM,
             IDOCTP LIKE EDIDC-IDOCTP,
             MESTYP LIKE EDIDC-MESTYP,
             DIRECT LIKE EDIDC-DIRECT,
             CREDAT LIKE EDIDC-CREDAT,
             STATUS LIKE EDIDC-STATUS,
           END OF TB_ED.
    DATA:   IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                    WITH HEADER LINE.
    Job Runtime Parameters
    DATA: GD_EVENTID LIKE TBTCM-EVENTID,
          GD_EVENTPARM LIKE TBTCM-EVENTPARM,
          GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
          GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
          GD_JOBNAME LIKE TBTCM-JOBNAME,
          GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
          GD_ERROR    TYPE SY-SUBRC,
          GD_RECIEVER TYPE SY-SUBRC.
    DATA:  W_RECSIZE TYPE I,
           W_SPOOL_NR LIKE SY-SPONO.
          %_print LIKE pri_params.
    DATA: GD_SUBJECT   LIKE SODOCCHGI1-OBJ_DESCR,
          IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
          GD_SENDER_TYPE     LIKE SOEXTRECI1-ADR_TYP,
          GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
          GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
    Spool to PDF conversions
    DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
          GD_DESTINATION LIKE RLGRAP-FILENAME,
          GD_BYTECOUNT LIKE TST01-DSIZE,
          GD_BUFFER TYPE STRING.
    Binary store for PDF
    DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
            INCLUDE STRUCTURE TLINE.
    DATA: END OF IT_PDF_OUTPUT.
    DATA: GD_RECSIZE TYPE I.
    CONSTANTS: C_DEV LIKE  SY-SYSID VALUE 'DEV',
               C_NO(1)     TYPE C   VALUE ' ',
               C_DEVICE(4) TYPE C   VALUE 'LOCL'.
    DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
            T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
            T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
            T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
            T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
            W_CNT TYPE I,
            W_SENT_ALL(1) TYPE C,
            W_DOC_DATA LIKE SODOCCHGI1.
    DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
           MC_VALID,
           P_REPID LIKE SY-REPID,
           WF_ID  LIKE TSP01-RQIDENT,
           LOC_BYTECOUNT TYPE I.
    *start-of-selection.
    MSTR_PRINT_PARMS-PDEST = 'LOCL'.
    P_REPID = SY-REPID.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
        authority= ' '
       COPIES                       = '1'
       COVER_PAGE                   = SPACE
       DATA_SET                     = SPACE
       DEPARTMENT                   = SPACE
       DESTINATION                  = 'LP01'
       EXPIRATION                   = '1'
       IMMEDIATELY                  = 'X'
       LAYOUT                       = 'X_65_132'
       MODE                         = SPACE
       NEW_LIST_ID                  = 'X'
       NO_DIALOG                    = 'X'
       USER                         = SY-UNAME
    IMPORTING
       OUT_PARAMETERS               = MSTR_PRINT_PARMS
       VALID                        = MC_VALID
    EXCEPTIONS
       ARCHIVE_INFO_NOT_FOUND       = 1
       INVALID_PRINT_PARAMS         = 2
       INVALID_ARCHIVE_PARAMS       = 3
       OTHERS                       = 4.
         SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
                          SPOOL PARAMETERS MSTR_PRINT_PARMS.
                          AND RETURN.
    NEW-PAGE PRINT ON NO DIALOG PARAMETERS
    MSTR_PRINT_PARMS.
    perform data.
    NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
    *SPOOL NO WAS GENERATED.
    WF_ID = SY-SPONO.
    *converting spool to pdf
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
         EXPORTING
              SRC_SPOOLID              = WF_ID  "SPOOL NUMBER
              NO_DIALOG                = SPACE
              PDF_DESTINATION          = 'X'
         IMPORTING
              PDF_BYTECOUNT =
                 LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
         TABLES
              PDF                      = INT_PDF  "TABLE FOR PDF REPORT
         EXCEPTIONS
              ERR_NO_ABAP_SPOOLJOB     = 1
              ERR_NO_SPOOLJOB          = 2
              ERR_NO_PERMISSION        = 3
              ERR_CONV_NOT_POSSIBLE    = 4
              ERR_BAD_DESTDEVICE       = 5
              USER_CANCELLED           = 6
              ERR_SPOOLERROR           = 7
              ERR_TEMSEERROR           = 8
              ERR_BTCJOB_OPEN_FAILED   = 9
              ERR_BTCJOB_SUBMIT_FAILED = 10
              ERR_BTCJOB_CLOSE_FAILED  = 11
              OTHERS                   = 12.
    *CALL FUNCTION 'DOWNLOAD'
    *EXPORTING
    *bin_filesize = loc_bytecount "NO. OF BYTES
    *filename = 'C:/EMAILPDF.PDF'
    *filetype = 'BIN'
    **IMPORTING
    **act_filename = loc_filename
    *TABLES
    *data_tab = int_pdf.
    IF P_DELSPL EQ 'X'.
      PERFORM DELETE_SPOOL.
    ENDIF.
    Transfer the 132-long strings to 255-long strings
    LOOP AT INT_PDF.
      TRANSLATE INT_PDF USING ' ~'.
      CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
    ENDLOOP.
    TRANSLATE GD_BUFFER USING '~ '.
    DO.
      IT_MESS_ATT = GD_BUFFER.
      APPEND IT_MESS_ATT.
      SHIFT GD_BUFFER LEFT BY 255 PLACES.
      IF GD_BUFFER IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
    DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
    CHECK GD_RECSIZE > 0.
    PERFORM SENDMAIL USING P_EMAIL..
    *&      Form  sendmail
          text
    -->  p1        text
    <--  p2        text
    FORM SENDMAIL USING P_EMAIL.
      CHECK NOT ( P_EMAIL IS INITIAL ).
      REFRESH IT_MESS_BOD.
    Default subject matter
      GD_SUBJECT         = 'Subject'.
      GD_ATTACHMENT_DESC = 'IDOC LIST'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      IT_MESS_BOD        = 'List Of Failed Idocs'.
      APPEND IT_MESS_BOD.
      IT_MESS_BOD        = 'List Of Failed Idocs'.
      APPEND IT_MESS_BOD.
    If no sender specified - default blank
      IF P_SENDER EQ SPACE.
        GD_SENDER_TYPE  = SPACE.
      ELSE.
        GD_SENDER_TYPE  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                                   TABLES IT_MESS_BOD
                                          IT_MESS_ATT
                                    USING P_EMAIL
                                          'Document attachment'
                                          'PDF'
                                          GD_ATTACHMENT_NAME
                                          GD_ATTACHMENT_DESC
                                          P_SENDER
                                          GD_SENDER_TYPE
                                 CHANGING GD_ERROR
                                          GD_RECIEVER.
    ENDFORM.                    " sendmail
    *&      Form  DELETE_SPOOL
          text
    -->  p1        text
    <--  p2        text
    FORM DELETE_SPOOL.
      DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
      LD_SPOOL_NR = WF_ID.   "GD_SPOOL_NR.
      CHECK P_DELSPL <> C_NO.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                SPOOLID = LD_SPOOL_NR.
    ENDFORM.                    " DELETE_SPOOL
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          text
         -->P_IT_MESS_BOD  text
         -->P_IT_MESS_ATT  text
         -->P_P_EMAIL  text
         -->P_0846   text
         -->P_0847   text
         -->P_GD_ATTACHMENT_NAME  text
         -->P_GD_ATTACHMENT_DESC  text
         -->P_P_SENDER  text
         -->P_GD_SENDER_TYPE  text
         <--P_GD_ERROR  text
         <--P_GD_RECIEVER  text
    FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES   IT_MESSAGE
                                              IT_ATTACH
                                        USING P_EMAIL
                                              P_MTITLE
                                              P_FORMAT
                                              P_FILENAME
                                              P_ATTDESCRIPTION
                                              P_SENDER_ADDRESS
                                              P_SENDER_ADDRES_TYPE
                                     CHANGING P_ERROR
                                              P_RECIEVER.
      DATA: LD_ERROR    TYPE SY-SUBRC,
             LD_RECIEVER TYPE SY-SUBRC,
             LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
             LD_EMAIL LIKE  SOMLRECI1-RECEIVER,
             LD_FORMAT TYPE  SO_OBJ_TP ,
             LD_ATTDESCRIPTION TYPE  SO_OBJ_NAM ,
             LD_ATTFILENAME TYPE  SO_OBJ_DES ,
             LD_SENDER_ADDRESS LIKE  SOEXTRECI1-RECEIVER,
             LD_SENDER_ADDRESS_TYPE LIKE  SOEXTRECI1-ADR_TYP,
             LD_RECEIVER LIKE  SY-SUBRC.
      DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
              T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
              T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
              W_CNT TYPE I,
              W_SENT_ALL(1) TYPE C,
              W_DOC_DATA LIKE SODOCCHGI1.
      LD_EMAIL   = P_EMAIL.
      LD_MTITLE = P_MTITLE.
      LD_FORMAT              = P_FORMAT.
      LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
      LD_ATTFILENAME         = P_FILENAME.
      LD_SENDER_ADDRESS      = P_SENDER.
      LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
    Fill the document data.
      W_DOC_DATA-DOC_SIZE = 1.
    Populate the subject/generic message attributes
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME  = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
      W_DOC_DATA-SENSITIVTY = 'F'.
    Fill the document data and get size of attachment
      CLEAR W_DOC_DATA.
      READ TABLE IT_ATTACH INDEX W_CNT.
      W_DOC_DATA-DOC_SIZE =
         ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
      W_DOC_DATA-OBJ_LANGU  = SY-LANGU.
      W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR  = LD_MTITLE.
      W_DOC_DATA-SENSITIVTY = 'F'.
      CLEAR T_ATTACHMENT.
      REFRESH T_ATTACHMENT.
      T_ATTACHMENT[] = IT_ATTACH[].
    Describe the body of the message
      CLEAR T_PACKING_LIST.
      REFRESH T_PACKING_LIST.
      T_PACKING_LIST-TRANSF_BIN = SPACE.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 0.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = 'RAW'.
      APPEND T_PACKING_LIST.
    Create attachment notification
      T_PACKING_LIST-TRANSF_BIN = 'X'.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM   = 1.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE   =  LD_FORMAT.
      T_PACKING_LIST-OBJ_DESCR  =  LD_ATTDESCRIPTION.
      T_PACKING_LIST-OBJ_NAME   =  LD_ATTFILENAME.
      T_PACKING_LIST-DOC_SIZE   =  T_PACKING_LIST-BODY_NUM * 255.
      APPEND T_PACKING_LIST.
    Add the recipients email address
      CLEAR T_RECEIVERS.
      REFRESH T_RECEIVERS.
      T_RECEIVERS-RECEIVER = p_EMAIL.
      T_RECEIVERS-REC_TYPE = 'U'.
      T_RECEIVERS-COM_TYPE = 'INT'.
      T_RECEIVERS-NOTIF_DEL = 'X'.
      T_RECEIVERS-NOTIF_NDEL = 'X'.
      APPEND T_RECEIVERS.
      DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
    W_SENT_ALL = 'X'.
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = W_DOC_DATA
                PUT_IN_OUTBOX              = 'X'
               SENDER_ADDRESS             = LD_SENDER_ADDRESS
               SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
                COMMIT_WORK                = 'X'
           IMPORTING
                SENT_TO_ALL                = W_SENT_ALL
           TABLES
                PACKING_LIST               = T_PACKING_LIST
                object_header              = objhead
                CONTENTS_BIN               = T_ATTACHMENT
                CONTENTS_TXT               = IT_MESSAGE
                RECEIVERS                  = T_RECEIVERS
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                OPERATION_NO_AUTHORIZATION = 4
                OTHERS                     = 99.
      IF SY-SUBRC NE 0.
        MESSAGE E000 WITH 'Error occurred while sending'.
      ELSE.
        MESSAGE I000 WITH 'The document was sent'.
      ENDIF.
    ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT
    *&      Form  data
          text
    -->  p1        text
    <--  p2        text
    FORM data.
    SELECT SNDPRN
             DOCNUM
             IDOCTP
             MESTYP
             DIRECT
             CREDAT
             STATUS
             FROM EDIDC
             INTO CORRESPONDING FIELDS
             OF TABLE TB_EDIDC
             WHERE STATUS = P_STATUS
             AND MESTYP IN S_MESTYP
             AND DIRECT IN S_DIRECT
             AND CREDAT IN S_CREDAT.
    SELECT KUNNR
           INPNR
           FROM EDPAR
           INTO CORRESPONDING FIELDS
           OF TABLE TB_EDPAR
           FOR ALL ENTRIES IN TB_EDIDC
           WHERE KUNNR = TB_EDIDC-SNDPRN.
    SELECT KUNNR
           ADRNR
           FROM KNA1
           INTO CORRESPONDING FIELDS
           OF TABLE TB_KNA1
           FOR ALL ENTRIES IN TB_EDPAR
           WHERE KUNNR = TB_EDPAR-INPNR.
    SELECT ADDRNUMBER
           BUILDING
           FROM ADRC
           INTO CORRESPONDING FIELDS
           OF TABLE TB_ADRC
           FOR ALL ENTRIES IN TB_KNA1
           WHERE ADDRNUMBER = TB_KNA1-ADRNR.
    LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
                     AND MESTYP IN S_MESTYP
                     AND DIRECT IN S_DIRECT
                     AND CREDAT IN S_CREDAT.
      TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
      TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
      TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
      TB_ED-MESTYP = TB_EDIDC-MESTYP.
      TB_ED-DIRECT = TB_EDIDC-DIRECT.
      TB_ED-CREDAT = TB_EDIDC-CREDAT.
      TB_ED-STATUS = TB_EDIDC-STATUS.
      READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
      READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
      READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
      TB_ED-LOC = TB_ADRC-BUILDING.
      APPEND TB_ED.
    ENDLOOP.
    WRITE :/02 'CustomerNo',
            15 'Location Code',
            30 'Idoc Number',
            55 'Basic Type',
            70 'Message Type',
            95 'Direction',
            110 'Received Date',
            130 'Status'.
    ULINE.
    LOOP AT TB_ED.
      WRITE :/02 TB_ED-SNDPRN,
              15 TB_ED-LOC,
              30 TB_ED-DOCNUM,
              55 TB_ED-IDOCTP,
              70 TB_ED-MESTYP,
              95 TB_ED-DIRECT,
              110 TB_ED-CREDAT,
              130 TB_ED-STATUS.
    ENDLOOP.
    ENDFORM.                    " data
    Kindly help me in solving the issue.
    Thanks in advance.
    Suki.

    Hi,
    Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
    If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
    Regards,
    Renjith Michael.

  • Authentication Error while Sending Email from SMTP server.

    Authentication Error while Sending Email from SMTP server.  Can receive emails but cannot send emails from this account. 

    no email account was setup on the phone unless it was issued by your company.
    gmail is required but no server address ports to enter.
    my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
    i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
    i doubt if it's a verizon issue.

  • Error while sending email using TemplateEmailSender in CSC server

    Hi,
    We are trying to send email using TemplateEmailSender from CSC server. But it is giving Null Pointer Exception in ProfiledMessageSource like below. The same code is working fine in commerce instance but it is failing in CSC instance. We are using ATG2007.1p3
    Any pointers would be helpful.
    Below is the error.
    Error while sending email
    java.lang.NullPointerException
            at atg.userprofiling.dms.ProfiledMessageSource.isConfiguredForProfileSubject(ProfiledMessageSource.java:196)
            at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:864)
            at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:848)
            at atg.userprofiling.SessionEventTrigger.nameContextElementPreUnbound(SessionEventTrigger.java:553)
            at atg.nucleus.GenericContext.sendPreUnboundEvent(GenericContext.java:200)
            at atg.nucleus.GenericContext.preNotifyRemovedObject(GenericContext.java:528)
            at atg.nucleus.GenericContext.removeElement(GenericContext.java:566)
            at atg.servlet.SessionNameContext.unbindFromNameContext(SessionNameContext.java:557)
            at atg.servlet.SessionNameContext.stopSession(SessionNameContext.java:534)
            at atg.servlet.SessionNameContext.decrementWrapperCount(SessionNameContext.java:242)
            at atg.servlet.SessionBindingReporter.valueUnbound(SessionBindingReporter.java:206)
            at org.apache.catalina.session.StandardSession.removeAttributeInternal(StandardSession.java:1625)
            at org.apache.catalina.session.StandardSession.expire(StandardSession.java:749)
            at org.apache.catalina.session.StandardSession.expire(StandardSession.java:655)
            at org.apache.catalina.session.StandardSession.invalidate(StandardSession.java:1100)
            at org.apache.catalina.session.StandardSessionFacade.invalidate(StandardSessionFacade.java:150)
            at atg.userprofiling.email.TemplateInvoker$TemplateSession.endSession(TemplateInvoker.java:935)
            at atg.userprofiling.email.TemplateEmailSender.createMessage(TemplateEmailSender.java:2387)

    Thanks for the reply.
    My issue is fixed now. It is JBOSS configuration issue. Sessions are not maintained properly that's why we are getting NULL profile in the session. Our application has multiple WARs so we fixed it by setting emptySessionPath to TRUE. If emptySessionPath attribute in server.xml is false, then each WAR will have its own jsessionid cookie.
    I did not touch ProfiledMessageSource as its required for session triggering.

  • Error while sending email from MOSS portal

    Hi,
    I have configured email settings on my MOSS central admin, still MOSS throws error while trying to send emails to AD users. I tried to give permission for a user in a site and it threw this error:
    The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator.   at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(PeopleEditor picker, String subject, String message)
       at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
       at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
       at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
       at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
       at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
       at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I have provided outbound smtp server address and the email addresses as well.
    Regards,
    Manoj

    Ok, issue solved!!  The issue was that I had to set anonymous connection directly to server. Error provided by SharePoint didn't help at all. After hours of hair-pulling and head-banging, I found a nice article that detailed how to troubleshoot e-mail issues:
    http://www.tonytestasworld.com/post/2009/04/09/SharePoint-2007-Outgoing-E-mail-Troubleshooting-Tips.aspx
    In the above article, the troubleshooting step 5 was the breaking point. As suggested in the blog:
    http://www.sharepointblogs.com/johnwpowell/archive/2007/07/10/alerts-failing-cannot-connect-to-smtp-host.aspx
    I created a C# console application and it gave me the correct error:
    The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
    So I used this code to create an SMTP test application:
    using System;
    using System.Collections.Generic;
    using System.Text;
    using System.Net.Mail;
    public class Program
    public static void Main(string[] args)
    try
    // Check arguments
    if (args.Length != 3)
    ShowUsage();
    return;
    // Create message
    MailMessage mmMessage = new MailMessage();
    mmMessage.To.Add(new MailAddress(args[2] as string));
    mmMessage.From = new MailAddress(args[1] as string);
    mmMessage.Subject = "TestMail";
    mmMessage.Body = "This is a test";
    // Send message
    SmtpClient sc = new SmtpClient(args[0] as string);
    sc.Send(mmMessage);
    catch (Exception ex)
    Console.WriteLine(ex);
    finally
    //Pause
    Console.WriteLine();
    Console.Write("Press a key >");
    Console.ReadKey();
    private static void ShowUsage()
    Console.WriteLine("Usage");
    Console.WriteLine("TestMail [SmtpServer] [FromAddress] [ToAddress]");
    } // end Program
    This command saved lots of trouble for me and solved the email issue:
    http://forums.msexchange.org/m_1800412705/mpage_1/key_/tm.htm
    set-ReceiveConnector "default sfzcombx" -permissiongroups:"ExchangeUsers,ExchangeServers,ExchangeLegacyServers,AnonymousUsers"
    Hope this helps somebody!
    Regards,
    Manoj

  • Error while sending emails from SOA 11G BPEL

    Hi All,
    I have configured an error email in my catch/catch-all blocks. Incase I dont have any retry action in my faultpolicies.xml file, the error email is sent fine. However if any remote/binding fault occurs and retry is done on partnerlink, in those cases the Error Notification service fails with below error:
    ORABPEL-31015
    Error while sending notification.
    Error while sending notification to email.
    Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
    Caused by: javax.naming.NameNotFoundException: While trying to look up comp/env/ejb/services/NotificationServiceBean in /app/ejb/ejb_ob_engine_wls.jar#BPELActivityManagerBean.; remaining name 'comp/env/ejb/services/NotificationServiceBean'
    sendEmailNotification WSIF Exception occured. Please check stack trace "Cannot get Object part 'Responses'. No parts are set on the message"
    If I throw a remote/binding fault (throw activity), the error email gets sent. However whenever the retry happens incase of a fault, the above error comes.
    Any idea what can be reason behing this...
    Regards
    Subhankar

    try to call a sub process from your catch all block and use the email activity in that subprocess. this should work

  • Error while sending email to distribution list

    Hello All,
    I am not able to send the email to Shared & Private distribution list.
    It is giving an error "Function <Send> not possible"
    I can send the email to users by specyfying their email id & recepient type as Internet address while sending mail from the Business Workplace. But we want to send it to users in shared/private distribution list.
    SCOT, SMTP are properly configured as per SAP Note 455140.
    Interestingly Routing Test in the SAPConnect shows no errors. Also the internal  traces are enabled, but it shows nothing for the outbound traces.
    Response starting with "220", in the telnet results (for both SAP server & Exchange server) confirms that the SCOT configuration is correct for Mail Host & Mail Port.
    We are on ECC6 on Oracle 10g & Windows.
    I have searched this forum but couldnot find relevant answer.
    If anybody has faced such problem, let me know how to resolve this.
    Regards,
    Vivdha

    Hi,
    Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
    If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
    Regards,
    Renjith Michael.

  • Error when sending email from a web application that runs on GlassFish

    Hello all, I hope some can give me some hints on how to fix this problem.
    I have a web application built in Java that runs on GlassFish v3.
    The application uses a mail plugin that makes use of mail.jar
    Whenever I try to use the plugin to send an email out I get an error.
    The application is programmed to send emails from a gmail account, and I believe there is a problem with the SSL version that Googlemail is expecting.
    By the way, everything works fine if I run the web app on other servers like Jetty or Apache.
    The stacktrace I get from the log when the error occurs is as follows:
    INFO: 2009-05-08 19:48:57,500 [httpWorkerThread-8080-0] ERROR errors.GrailsExceptionResolver - org.springframework.mail.MailSendException: Mail server connection failed; nested exception is javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465;
    nested exception is:
    java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
    org.codehaus.groovy.runtime.InvokerInvocationException: org.springframework.mail.MailSendException: Mail server connection failed; nested exception is javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465;
    nested exception is:
    java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
    at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:431)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:337)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:218)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:250)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:218)
    at org.apache.catalina.core.ApplicationDispatcher.doInvoke(ApplicationDispatcher.java:883)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:732)
    at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:554)
    at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:485)
    at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:377)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:250)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:218)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:250)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:218)
    at org.jsecurity.web.servlet.JSecurityFilter.doFilterInternal(JSecurityFilter.java:382)
    at org.jsecurity.web.servlet.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:180)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:250)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:218)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:250)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:218)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:250)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:218)
    at org.apache.catalina.core.StandardWrapperValve.preInvoke(StandardWrapperValve.java:460)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:139)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:186)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:719)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:657)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:96)
    at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:187)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:719)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:657)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:651)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1030)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:142)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:719)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:657)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:651)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1030)
    at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:325)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:242)
    at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:180)
    at com.sun.grizzly.http.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:633)
    at com.sun.grizzly.http.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:570)
    at com.sun.grizzly.http.DefaultProcessorTask.process(DefaultProcessorTask.java:827)
    at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:152)
    at com.sun.enterprise.v3.services.impl.GlassfishProtocolChain.executeProtocolFilter(GlassfishProtocolChain.java:71)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:103)
    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:89)
    at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
    at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:67)
    at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:56)
    at com.sun.grizzly.util.WorkerThreadImpl.processTask(WorkerThreadImpl.java:325)
    at com.sun.grizzly.util.WorkerThreadImpl.run(WorkerThreadImpl.java:184)
    Any help would be really appreciated... honestly I'm pretty stuck.
    Alex

    Hi Alex,
    Since I had a Gmail test servlet kicking around, I ran it on the latest V3 nightly build.
    On the first run, I encountered the following nested exceptions:
    javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465
    --> java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
        --> java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
            --> java.security.UnrecoverableKeyException: Password must not be nullThe UnrecoverableKeyException is a manifestation of [https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938|https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938]
    I worked around this by adding the following JVM config options to domain.xml
    <jvm-options>-Djavax.net.ssl.keyStorePassword=changeit</jvm-options>
    <jvm-options>-Djavax.net.ssl.trustStorePassword=changeit</jvm-options> (Note: the default master password is "changeit")
    These lines are placed in /domain/configs/config/java-config of domain.xml for the particular server config you're using. There's only one server config in the default domain.xml shipped with V3. Then restart the server.
    I retested the code on both port 465 and 587, with and without the above config changes. Without the change, they both fail the same way, and with the change, they both work. Let me know if this helps.
    -Peter

  • Javascript error when send email using webmail

    Dear Sun,
    One of our user encounter javascript error when try sending email using webmail below is the error message:
    " +https://webmail.ubd.edu.bn/uwc/webmail/comp_fs_lr.html&rev=3&security=false&lang=en&popupLevel=undefined&cal=1&charset=escaped_unicode, Line 1755+
    +Permission denied+
    "

    Hi Shane,
    below is the answer you need
    What browser is the user using?
    => Firefox and IE
    What browsers have you tested where it doesn't occur?
    =>I tested all the browser (firefox,IE, chrome) it doesn't happen to me
    When did this problem first start?
    =>After the user finish compiled his message and click send
    What is the exact version of UWC you are running (./showrev -p | grep uwc)
    =>Patch: 122793-26 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
    Patch: 122793-29 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
    Patch: 122793-31 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
    Does this error occur all the time? Does it occur for every user, or some users or just one user?
    => Not all the time, so far i just receive one complaint .

  • Runtime error when sending email from PCUI

    Hi,
    When sending email from an activity in PCUI, I get runtime error, Line 2201, error, 'Object Expected'.
    Any idea?
    Thanks,
    AR

    Hi AR,
    This appears to be a javascript error. Could you give some more details about this error.
    Regards,
    Hemanth

  • Error in sending email to users(outside sap)

    Hello experts,
    We just transported my program to QAS server and I just tested it now if my program to send messages to emails outside works. Unfortunately, it doesn't. I am using FM SO_NEW_DOCUMENT_SEND_API1 and the sy-subrc = 2 whcih means document not sent. Also, there is window that popped up that says
    Database error for <ADDR_PERS_COMP_COMM_GET> <0>
    Again, thank you guys for all your help and take care!

    Hi,
    Check this
    Sending mail To Standard SAP MAIL Box
    http://www.sap-img.com/abap/sending-email-with-attachment.htm
    SCOT settings
    http://www.sap-img.com/basis/basis-faq.htm
    Sending External email through SAP
    http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
    http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
    http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm\
    http://www.sap-img.com/abap/sending-email-with-attachment.htm
    Sample Code
    Sending External email through SAP
    What is the FM for sending the external email through SAP by attaching layout set  to it?
    These are the FM for sending external email :-
    SO_DOCUMENT_SEND_API1 
    SAPoffice: Send new document with attachments via RFC 
    SO_NEW_DOCUMENT_ATT_SEND_API1
    (In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
    SAPoffice: Send new document with attachments via RFC 
    Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject. 
    SO_NEW_DOCUMENT_SEND_API1 
    SAPoffice: Send new document 
    How to send a report to an external mail-id?
    <b>
    Try this sample code :-</b>
    REPORT ZREPORT_TO_EMAIL NO STANDARD PAGE HEADING LINE-SIZE 200.
    DATA : BEGIN OF ITAB OCCURS 0,
    PERNR LIKE PA0001-PERNR,
    ENAME LIKE PA0001-ENAME,
    END OF ITAB.
    DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
    receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
    packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
    listobject LIKE abaplist OCCURS 10,
    compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
    w_object_hd_change LIKE sood1,
    compressed_size LIKE sy-index.
    START-OF-SELECTION.
    SELECT PERNR ENAME
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    FROM PA0001
    WHERE PERNR < 50.
    LOOP AT ITAB.
    WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
    SY-VLINE.
    ENDLOOP.
    Receivers
    receiver_list-recextnam = '[email protected]'. "-->
    EMAIL ADDRESS
    RECEIVER_list-RECESC = 'E'. "<-
    RECEIVER_list-SNDART = 'INT'."<-
    RECEIVER_list-SNDPRI = '1'."<-
    APPEND receiver_list.
    General data
    w_object_hd_change-objla = sy-langu.
    w_object_hd_change-objnam = 'Object name'.
    w_object_hd_change-objsns = 'P'.
    Mail subject
    w_object_hd_change-objdes = 'Message subject'.
    Mail body
    APPEND 'Message content' TO message_content.
    Attachment
    CALL FUNCTION 'SAVE_LIST'
    EXPORTING
    list_index = '0'
    TABLES
    listobject = listobject.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    compressed_size = compressed_size
    TABLES
    in = listobject
    out = compressed_attachment.
    DESCRIBE TABLE compressed_attachment.
    CLEAR packing_list.
    packing_list-transf_bin = 'X'.
    packing_list-head_start = 0.
    packing_list-head_num = 0.
    packing_list-body_start = 1.
    packing_list-body_num = sy-tfill.
    packing_list-objtp = 'ALI'.
    packing_list-objnam = 'Object name'.
    packing_list-objdes = 'Attachment description'.
    packing_list-objlen = compressed_size.
    APPEND packing_list.
    CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
    object_hd_change = w_object_hd_change
    object_type = 'RAW'
    owner = sy-uname
    TABLES
    objcont = message_content
    receivers = receiver_list
    packing_list = packing_list
    att_cont = compressed_attachment.
    <b>
    2nd Program</b>
    REPORT ZSENDEXTERNAL.
    DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
    DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
    DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
    DATA: DOC_CHNG LIKE SODOCCHGI1.
    DATA: TAB_LINES LIKE SY-TABIX.
    Creation of the document to be sent
    File Name
    DOC_CHNG-OBJ_NAME = 'SENDFILE'.
    Mail Subject
    DOC_CHNG-OBJ_DESCR = 'Send External Mail'.
    Mail Contents
    OBJTXT = 'Minimum bid : $250000'.
    APPEND OBJTXT.
    OBJTXT = 'A representation of the pictures up for auction'.
    APPEND OBJTXT.
    OBJTXT = 'was included as attachment.'.
    APPEND OBJTXT.
    DESCRIBE TABLE OBJTXT LINES TAB_LINES.
    READ TABLE OBJTXT INDEX TAB_LINES.
    DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
    Creation of the entry for the compressed document
    CLEAR OBJPACK-TRANSF_BIN.
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM = 0.
    OBJPACK-BODY_START = 1.
    OBJPACK-BODY_NUM = TAB_LINES.
    OBJPACK-DOC_TYPE = 'RAW'.
    APPEND OBJPACK.
    Creation of the document attachment
    (Assume that the data in OBJBIN is in BMP format)
    *OBJBIN = ' \O/ '. APPEND OBJBIN.
    *OBJBIN = ' | '. APPEND OBJBIN.
    *OBJBIN = ' / \ '. APPEND OBJBIN.
    *DESCRIBE TABLE OBJBIN LINES TAB_LINES.
    *OBJHEAD = 'PICTURE.BMP'.
    *APPEND OBJHEAD.
    Creation of the entry for the compressed attachment
    *OBJPACK-TRANSF_BIN = 'X'.
    *OBJPACK-HEAD_START = 1.
    *OBJPACK-HEAD_NUM = 1.
    *OBJPACK-BODY_START = 1.
    *OBJPACK-BODY_NUM = TAB_LINES.
    *OBJPACK-DOC_TYPE = 'BMP'.
    *OBJPACK-OBJ_NAME = 'PICTURE'.
    *OBJPACK-OBJ_DESCR = 'Representation of object 138'.
    *OBJPACK-DOC_SIZE = TAB_LINES * 255.
    *APPEND OBJPACK.
    Completing the recipient list
    RECLIST-RECEIVER = '[email protected]'.
    RECLIST-REC_TYPE = 'U'.
    APPEND RECLIST.
    *RECLIST-RECEIVER = 'SAPUSERNAME'.
    *RECLIST-REC_TYPE = 'P'.
    *APPEND RECLIST.
    Sending the document
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    DOCUMENT_DATA = DOC_CHNG
    PUT_IN_OUTBOX = 'X'
    TABLES
    PACKING_LIST = OBJPACK
    OBJECT_HEADER = OBJHEAD
    CONTENTS_BIN = OBJBIN
    CONTENTS_TXT = OBJTXT
    RECEIVERS = RECLIST
    EXCEPTIONS
    TOO_MANY_RECEIVERS = 1
    DOCUMENT_NOT_SENT = 2
    OPERATION_NO_AUTHORIZATION = 4
    OTHERS = 99.
    CASE SY-SUBRC.
    WHEN 0.
    WRITE: / 'Result of the send process:'.
    LOOP AT RECLIST.
    WRITE: / RECLIST-RECEIVER(48), ':'.
    IF RECLIST-RETRN_CODE = 0.
    WRITE 'The document was sent'.
    ELSE.
    WRITE 'The document could not be sent'.
    ENDIF.
    ENDLOOP.
    WHEN 1.
    WRITE: / 'No authorization for sending to the specified number',
    'of recipients'.
    WHEN 2.
    WRITE: / 'Document could not be sent to any recipient'.
    WHEN 4.
    WRITE: / 'No send authorization'.
    WHEN OTHERS.
    WRITE: / 'Error occurred while sending'.
    ENDCASE.
    Message was edited by: Manoj Gupta

  • Versamail error when sending email

    i have a palm t/x.  versamail works great receiving mail but when i try to send a new email or reply i get an "error 554 relay access denied".  my account is set up as an imap.  anyone have suggestions to a solution?  thanks all
    Post relates to: Palm TX

    pdadude, are you using Sprint's SMTP server? They do block a lot of outgoing servers so it's easier sometimes to just use theirs. One way to test is to sign up for a free gmail account and turn on POP or IMAP then configure that in VersaMail. See if you can send then.
     Outgoing mail server issuesDoes your Internet service provider (ISP) prevent you from sending emails because they do not recognize your Internet location (via your smartphone)?
    Your smartphone may be connected to an IP address that your ISP's email server does not recognize. The server may refuse to send your emails unless you authenticate yourself; it thinks you may be a SPAMmer.
    Simple solution: use another SMTP server furnished by your mobile service provider expressly for this purpose. With the exception of AT&T, all mobile service providers offer an SMTP server to get around problems with sending email. Plug in the new SMTP server name, a username and password and off you go.
    Contact your mobile service provider, and find out if you can use their SMTP server to send SMTP emails (we provide the details for all the common mobile service providers below to save you the call).
    Note: Keep your email service provider's server as the Incoming (POP) server; there is no need o change this.
    Does your mobile service provider prevent you from sending emails from a different server?
    Many mobile service providers do not allow users to send email from a connection other than their own (the mobile service provider's, that is). Contact your mobile service provider, and find out if you can use their connection to send SMTP emails. If you can, enter this information as the incoming server; keep your email service provider's server as the outgoing server. See the chart below.
    Does your mail server require SMTP authentication?
    Your email service provider may require a username and password to be entered when you send email. This helps ensure security and reduce spam. See the chart below.
    Here's how to add your outgoing username and password:
    In VersaMail, open the Menus.
    From the Accounts menu, select Account Setup.
    Highlight the email account you want to check,then select Edit.
    Depending on your version of VersaMail, you may have to select the Next button several times to get to the Advanced settings.
    When you see an option for ESMTP (may appear as "Use authentication (ESMTP)" or "My server requires authentication (ESMTP)"), check the box next to this option.
    Enter the outgoing username and password for ESMTP. See the chart below for this information.
    SMTP servers, usernames and passwords
    (find your carrier below) AT&TThe information below is based on former Cingular Wireless* settings, which may have changed. For the latest information, contact AT&T.
    With legacy AT&T Wireless accounts, you may have had two email accounts. One contained your former AT&T Wireless mMode username ([email protected]), and the other contained your phone number ([email protected]). If you don't already have an mMode username, contact AT&T for more information.
    Former AT&T Wireless accounts could not send emails from third-party email accounts; you needed your mMode email address to send mail. Under former AT&T Wireless settings, you would still be able to receive emails from an unrelated POP3 account, but any outgoing mails must be sent from your mMode email address. Contact AT&T for updates.
    Outgoing (SMTP) Server: cwmx.com
    User name: (none)
    Password: (none)
    *AT&T provides service for former Cingular Wireless accounts.Rogers Wireless For Rogers Wireless, you do not need to enter a user name or password, but you do need to enter the SMTP server info.
    SMTP Server: smtp.rogerswirelessdata.com
    User name: None
    Password: None
    Sprint PCS Before setting up your email account, you'll need to set your PCS Vision Email password. If you haven't already done this, go to MyPCS on the Sprint PCS website and login. Select "My Personal Information." Under "Passwords," to the right of PCS Vision User Name, select "Modify." You'll see your Sprint PCS email address; remember this address. Go back to My Personal Information. Under PCS Vision User Name, to the right of PCS Vision Password, select "Modify." Create a new password. Note: When you do this, your PCS Vision password will be reset on your smartphone. Make sure you're in an area of coverage.
    SMTP Server: smtp.sprintpcs.com
    User name: Your PCS Vision Email username (the part before the "@" in your email address)
    Password: Your PCS Vision Email password
    T-Mobile You may not need to enter an SMTP username and password. However, if you're having problems sending, you may need to contact T-Mobile and register your POP server and password. You'll be issued an SMTP username and password for sending emails on T-Mobile's SMTP server. While you're at the T-Mobile website, turn off the Alerts option, or you'll receive SMS messages containing the text of received emails.
    SMTP Server: myemail.t-mobile.com
    User name: None, or T-Mobile SMTP username (above)
    Password: None, or T-Mobile SMTP password (above)
    Verizon Wireless
    SMTP Server: smtp.vzwmail.net
    User name: [10-digit phone number]@vzwmail.net ([email protected])
    Password:Your www.vtext.com password
    Security note: If you are uncomfortable using the SMTP server of your mobile service provider, you can also setup VersaMail's SMTP authentication settings so that VersaMail will pass an SMTP username and password to your existing server to meets its security requirements. See the VersaMail portions of your user guide for more details on the options available. Please consult your ISP for the settings required for their particular SMTP server. Some ISPs and DSL providers use restricted IP-ranges for authentication so that it is never possible to authenticate to your current SMTP server when connected via your wireless account. In that case, you have no option but to use the mobile service provider's Outgoing (SMTP) server.
    Post relates to: None
    Post relates to: None

  • Error while sending email to Multiple Recipients

    Hi,
    I am trying to send email to multiple recipients .It works fine if all the email-addresses are valid. If even one is invalid throws exception .I wish to send it all the valid addresses even if some are invalid as this email will be going to 3000 users some of them will be wrong addresses.
    Help is greatly appreciated.
    -ksg
    Exception thrown:
    Exception in SendEmail.setAddress as :javax.mail.SendFailedException: Invalid Addresses;
    nested exception is:
    javax.mail.SendFailedException: 550 <[email protected]>... User unknown
    Here is the main piece of code:
    message.saveChanges();
    Transport transport = session.getTransport("smtp");
    transport.connect("myhost", "", "");
    transport.sendMessage(message, message.getAllRecipients());
    transport.close();

    Hi there,
    Well I find the easiest way is to use a comma delimited string with the following bit of code.
    msg.setRecipients(
    addrType,
    InternetAddress.parse(smtpAddress, false));
    addrType will be TO,CC or BCC
    smtpAddress is a comma delimited string that I get from the results of a SQL Select request (looks something like "[email protected],[email protected],....,....,...."
    The boolean false is to prevent the parse checking the validity of the SMTP addresses as I prefer to deal with this by letting the SMTP server tell me which addresses are no good.
    Hope this helps,
    SH

  • Error in Send email notification in Incident Management

    Dear Experts ,
    Could you please help me where I am going wrong.
    Here is my problem.
    Step-1: Trying to
    send an email.
    Step  2: Once clicked on Send E-mail. Below screen
    appears
    Step 3:
    I followed http://scn.sap.com/docs/DOC-35291 . Now I have made some changes when I click on send email under follow up I am getting below screen.
    Step 4:
    Now how to get back to the previous screen and resolve the issue .
    Regard's
    Sai

    Dear All,
    Finally I found out the solution for this . We need to assign the category under the transaction type 005 as 401. Then this problem is solved.
    Regard's
    Sai

  • Kern-Exec Error when sending emails from 9500

    Hi There
    My first post so hopefully someone may be able to help and I'll try to help others if I can.
    Just recently I have been unbale to send emails from my Nokia 9500. I don't think I've been doing anything differently but I keep getting KERN-EXEC error reason No 3, when I try to send email messages. Strange that I'm able to receive messages ok though.
    I looked at some of the other posts and followed mobile manic's advice for other KERN-EXEC errors. I backed up the phone contents to the PC, restored the phone to default settings and then re-loaded all the backed up stuff.
    Sadly, I still get the KERN-EXEC error message when I try to send emails. It seems to conect to GPRS ok but then the message just sits in the Outbox waiting to go but never does. So when I close the program (after leaving it for a few mins) that's when I get the KERN-EXEC error message.
    Any help greatly appreciated.
    Cheers
    Sparky007

    Hi there Sparky!
    I don't suppose you tried to send an email before you restored the backup did you? Sometimes backups can back up the problem as well which is a bit annoying.
    If you can send an email ok before restoring the backup then the problem must be embedded in the backup... otherwise the only thing I could suggest is contacting a Nokia engineer to get them to have a look at it.
    Not sure what else to suggest... good luck though and let us know how you get on.

Maybe you are looking for