Error on starting Live Cache
Dear All
I have a SCM 7.0 application with Live Cache installed. The same was working fine till few days back.
However, now, when I am trying to start Live Cache using LC10, I am receiving an error as per the lcinit.log.
START *****************************
liveCache SCM (restart)
01.07.2010
11:09
Installation path is D:\sapdb\SCM\db
Operating system is Windows Server 2003 family
The liveCache state is OFFLINE
DBMServer 7.7.04 Build 029-123-196-543
Starting SCM into ADMIN
Starting SCM into ONLINE
ERR
-24988,ERR_SQL: SQL error
-902,I/O error
3,Database state: OFFLINE
Internal errorcode, Error code 9050 "disk_not_accessible"
20017,RestartFilesystem failed with 'I/O error'
ERROR : Restart not possible (please check KnlMsg)
ERROR : liveCache SCM not started
01.07.2010
11:09
END ******************************
Any suggestions
Regards
Lokesh
HI there,
why don't you take a closer look to what is in the message?
> Internal errorcode, Error code 9050 "disk_not_accessible"
> 20017,RestartFilesystem failed with 'I/O error'
> ERROR : Restart not possible (please check KnlMsg)
There is a problem with the liveCache disks.
This problem prevents that the liveCache can be started.
For more information you should look into the KNLMSG file.
Why don't you just do that?
The file will tell you what file is the problem and what kind of problem there is with the file.
regards,
Lars
Similar Messages
-
Live Cache Failed (DBM error)
Hi,
I am getting following error while starting live cache(LC10)
"Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LC1 on server system"
Server: system
Users: SAPUSER
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server : LC1 - system
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit restart
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution#
0,sap\lcinit LC1 restart -uDBM , -uDBA , -uSQL ,
liveCache LC1 (restart)
The liveCache state is OFFLINE
DBMServer 7.6.00 Build 029-123-130-265
starting LC1 into ONLINE
ERROR : restart not possible [please check knldiag!!]
ERROR : liveCache LC1 not started (see "d:\sapdb\data\wrk\LC1\lcinit.log")
In Transaction DB59 i tried connection test "Connect. test with "native SQL" ( LCA ) unsuccesful"
how to restart Live Cache again? what will be the problem?
regards
ThennarasuHello,
what's wrong with the hint you already got?
> ERROR : restart not possible [please check knldiag!!]
Check the knldiag and then we might be able to do something about this issue.
regards,
Lars -
dear all
when i m going to start live cache it shows error
" DBMCLI_COMMAND_EXECUTE_ERROR"
please tell me solution how to reslove it
regdsHello,
Please go through these notes :147927 and 764537. Let me know if these are useful.
Thanks,
KC -
Hi ,
Some times we see errors like "No Live Cache Anchor Found". Can somebody tell me in detail that what is a live cache anchor and why this inconsistency occurs. Is there a link containing detailed documentation?
Best Regards,
Chandan DubeyDear Chandan,
This error message "No Live Cache Anchor Found" states that for one or even for several characteristics combinations (see Transaction /SAPAPO/MC62) a so-called LiveCache anchor does not exist.In this case, a LiveCache anchor is a pointer to one or several time series in the LiveCache.
There is one LiveCache anchor per planning area, characteristics combination (planning object) and model (model belonging to the planning version, see transaction /SAPAPO/MVM). If for one planning area, time series objects were created for several versions with different models, that means several LiveCache anchors exist for the same planning area and for the same characteristics combination.If you created time series objects for several versions of the same model, that means one LiveCache anchor
points to several time series in the LiveCache.
If there is no LiveCache anchor for a planning area, a model and a characteristics combination, this also means that no respective time series exists in the LiveCache and thus, this characteristics combination cannot be used for the planning with this planning area for all versions of the model.If this state occured for a certain characteristics combination, the above-mentioned error message occurs if either exactly this characteristics combination is selected or if a selection contains this characteristics combination.
Possible causes and solutions:
- Time series objects have not yet been created for the selected version.
Solution: Create time series objects (see documentation)
- You are using a planning session with version assignment.For the version that was acutally selected, the time series objects were created, however, this is not the case for the assigned version.
Solution:Create time series objects for the assigned version.
- New characteristics combinations were created without the 'Create time series ob' option (see Transaction /SAPAPO/MC62).
Solution:Execute the report /SAPAPO/TS_LCM_PLOB_DELTA_SYNC for the basis planning object structure of the planning area.This will create the corresponding LiveCache anchors and LiveCache time series for all planning areas that used these basis planning object structure and for all versions of these planning areas for which time series objects already exist.
If none of these possible solutions is successful, you can use report /SAPAPO/TS_LCM_CONS_CHECK to determine and correct the inconsistencies for a planning area ('Repair' option).
I hope this helps.
Regards,
Tibor -
Live Cache x_server throwing error when starting
Hi,
When i'm trying to start the Live Cache X_server , It is giving the below error:
12798 NISERVER NI support started.
WNG 12453 NISSLSRV NISSL Init: SSL: Could not locate licence file
12902 XSERVER started, 'X64/LINUX 7.6.00 Build 018-123-119-055'
Os: IBM AIX 5.3
SCM 5.0
Please anybody have the solution, please share.ok, fixed it.
Putting the dtd on a machine that it can see solved it... would be nice if the doc mentioned that your test machine (the one that it warns is insecure as everything is installed as root etc etc) needs to have outgoing internet access...
Ho hum.
Oddly, requesting that dtd from sun gives a 500 - using:
<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
-->
<!DOCTYPE sun-web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server 8.1 Servlet 2.4//EN" "http://cherry.kent.ac.uk/sun-web-app_2_3-1.dtd">
<sun-web-app>
<context-root>/httpbind</context-root>
</sun-web-app>where sun-web-app_2_3-1.dtd if the dtd available at http://www.sun.com/software/dtd/appserver/sun-web-app_2_3-1.dtd
hopefully this will give someone else a hint :) -
Error during Live Cache Server Installation on SCM 4.1 system
Hi All,
I have an SCM 4.1 ABAP system running on MSSQL2005 and Win2003 server.I would like to install Live Cache Server on the same Server.Livecache client was installed as part of SCM 4.1 installation.
I have installed MAXDB software and now when im trying to install Live Cache Server Instance i get the below error
Im performing the installation with user root and it is an Administrator.
WARNING 2011-12-09 11:01:25
Execution of the command "change 'user' '/install'" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
Installation start: Friday, 09 December 2011, 11:01:23; installation directory: G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\SAPINST\NT\AMD64; product to be installed: SAP SCM 4.1> Additional Services> Install a liveCache Server instance
Transaction begin ********************************************************
WARNING 2011-12-09 11:02:33
Error 3 (The system cannot find the path specified.
) in execution of a 'CreateProcess' function, line (265), with parameter (G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\NT\AMD64\SDBUPD.EXE -l).
Transaction end **********************************************************
WARNING 2011-12-09 11:02:34
The step Fill_sapdb_db_instance_context with step key LIVECACHESERVER|ind|ind|ind|ind|ind|0|LC_SERVER_INSTALL|ind|ind|ind|ind|ind|0|Fill_sapdb_db_instance_context was executed with status ERROR.
Has anyone seen this error before ? Any pointers would be helpful.
Regards,
Ershad Ahmed.Subprocess starts at 20111209154957
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209154957
OK
> Subprocess starts at 20111209155027
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155027
OK
> Subprocess starts at 20111209155221
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155221
OK
> Subprocess starts at 20111209155323
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
> Subprocess starts at 20111209155324
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
> Subprocess starts at 20111209161349
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209161349
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
Regards,
Ershad Ahmed. -
Live Cache 7.5. Installation SCM4.1 ERROR MDB-070020
Hi,
we`re trying to install live cache 7.5.00.21 on SCM 4.1.
(Maxdb version of normal db is 7.6.05.09).
We had an other version installed before, which we deleted because of other errors.
Now we`re getting the following error message - any idea?
WARNING 2009-01-16 11:19:37
Execution of the command "/special1/TAD_NEU/lcinst/UNIX/HPIA64/SDBINST '-indep_prog' '/sapdb/programs' '-indep_data' '/sapdb/data' '-depend' '/sapdb/LCA/db'
'-profile' 'APO LiveCache' '-o' '1100' '-g' '1100' '-b'" finished with return code 1. Output:
starting preparing phase of package Base 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Server Utilities 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Database Kernel 7.5.00.21 64 bit
cannot do update check - test file "/sapdb/LCA/db/pgm/kernel" not found
installation exited abnormally at Fr, Jan 16, 2009 at 11:19:37
ERROR 2009-01-16 11:19:37
MDB-070020 The database installer reported an error. Some database applications are probably still running.
Check the log file sdbinst.log.Michael Schneider wrote:>
> Hi,
>
> we`re trying to install live cache 7.5.00.21 on SCM 4.1.
> (Maxdb version of normal db is 7.6.05.09).
>
> We had an other version installed before, which we deleted because of other errors.
>
> Now we`re getting the following error message - any idea?
Sure - how did you uninstall the former installation?
rm -f /sapdb/<DBSID> ??
To correctly uninstall a MaxDB/liveCache you'll always have to use the SDBUNINST tool.
Since there seems to be another installation on the same server, it's now a bit complicated to clean up the registration mess... You should open a support message for that. Then we'll see what we can do here.
regards,
Lars -
Hi,
Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Thanks,
Chetan> Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
Hmm... that is usually not the way it should work - I assume you're employing a third party backup tool here?
If not, than you definitively shouldn't create the log backup directly to tape.
Instead you should use the AUTOLOG backup to the filesystem and afterwards archive the backups to the tape.
> ERR
> -24988,ERR_SQL: SQL error
> -104,DBM command impossible at this time
Well, it means what it says: for some reason (e.g. there is already a backup running) you cannot start the backup right now.
For more detailed answers we need to see the log files of the database.
> Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Hmm... what has your liveCache to do with your business (month?) end closing??
Anyhow, if something is important1, critical2 or urgent3 then the forum might not be the place to go.
In such cases always open a support message - there you've got guaranteed response times.
regards,
Lars
please don't blame me for adding the numbers to the three bad words above - this was the only way to get around the awkward content filtering of this forum
Edited by: Lars Breddemann on Sep 4, 2009 9:47 AM -
ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
Hi Team
we are a getting a ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
LC version 7.9
OS AIX
SAP SCM 7
SDBVERIFY giving the following error
Checking package Redist Python
Checking package Loader
Checking package ODBC
Checking package Messages
Checking package JDBC
Checking package DB Analyzer
ERR: Failed
ERR: Checking installation "Legacy" failed
ERR: Group of directory /sapdb/data/config/install changed [0 =>
sdbregview -l is showing good.
any idea what might went wrong.
trying to use sdbverify -repair_permissions , but not sure about the exact syntax to use.
and it is not related to timeout parameter, we tested with different timeout values, but still the same error.
thanks
Kishore ChHello Kishore,
you could check the sizing of the liveCache data.
* Report /SAPAPO/TS_LCM_REORG_SNP has checks of the SNP planning areas for superfluous objects.
* Delete old/temporary APO data.
* /SAPAPO/TS_LCM_REORG report checked TS superfluous objects.
If you didn't create the planning versions, copy of planning versions & data load to liveCache, then create the SAP message to check your system on the question of the dataarea usage.
If you have the long running APO transactions => performance of the SCM system has to be checked.
If you have the bottleneck in liveCache & could not solve the case by yourself => create the SAP message to BC-DB-LVC and get SAP support.
Best regards, Natalia Khlopina -
An error occurred while starting "Web Cache".
We have corrected the issue. There was something wrong with the files in the WebCache Folder.
Hello,
When starting Web Cache we get the following message:
An error occurred while starting "Web Cache".
WebCache : WebCache - failed to start a managed process after the maximum retry limit
WebCache : WebCacheAdmin - failed to start a managed process after the maximum retry limit
For more information, look at the logs using the related link below.
Related Link Error Logs
When we open the event_log in the \webcache\logs folder, there is nothing there. The process is not writing any type of message to the event_log.
We have tried changing port numbers without any success.
This process was working until a restart of the server yesterday. Now Web Cache and Portal are not showing active.
Thank you for any input on this matter.
Message was edited by:
user593854Try to stop processes that might still occupy the port of the webcache and webcache admin.
Also check the logfiles in the opmn.
cu
Andreas -
DBM Error return code -11 in LC10 Administration in SCM System Live Cache
Hello,
We have installed SCM 4.1 on Solaris on one box and LC 7.5 on another solaris box.
For kernel upgrade, we shut down Live Cache using LC10>administration on SCM server. After kernel patch, other patches for ABAP stack, we upgraded LC to SP11 build 35.
Since then, we get following error in LC10.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : dbm_version
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Also, in DB59, when we try to check connection, we get following error -
General Connection Data
Connection Name....: LCA
Database Name......: LCA
Database Server....: gva1073
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: gva1075_SCD_03 (
SunOS )
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
4. Connect. test with "native SQL" ( LCA )
Successful
++++++++++++++++++++++++++++++++++++++++++++++++++++
Can anybody please help?
Thanks and regards,
VaibhavHello Vaibhav,
while using transaction LC10, the error 11 "tp error: Terminating. [nlsui0.c ...]" occurs. The user authorization with tp fails and the application server cannot connect to the liveCache.
I assumed, that it's due to a library version mismatch, tp cannot use the liveCahe UNICODE libraries.
Please check, that the tp call at the command line works properly. And a dbmcli call in the transaction SM49 with the tp options
(dbmcli ::
-d <LC-SID> -n <LC-servername> -tpp <profile> -tpi <system-SID>
-tpc <connection - LCA/LDA> dbm_version)
works also properly.
I recommend you to update the liveCache client software on the Application server.
If you've got access to OSS/Service Market Place, then please take a look at note
649814 how to update the liveCache client software on the application server.
< Please also review the SAP notes 847736 & 831108 >
Before the liveCache client version will be upgraded on the application
server you can use the workaround by switching off the central authorization for the liveCache LCA/LDA connections:
In transaction LC10, choose Integration and deactivate the option Central authorization, then save.
If you are the official SAP customer, I recommend you to create the ticket to SAP on 'BC-DB-LVC' queue.
Thank you and best regards, Natalia Khlopina -
Error saving transport requisitio​n to live cache
Hi Gurus,
while location heuristic running getting in bottom line message like error saving transport requisition to live cache.kindly suggest me soon.
regards,
babuDear Rajendra,
The error message seems to occur during the deletion of the purchase
requisitions when running the heuristics. The error /SAPAPO/SNP028
occurs when SNP tries to access the order data whose master data has
been changed. So, when the order's master data has changed and no
longer represent the existing one, you get this error message.
Please run the report
/SAPAPO/RLCDELETE before running the heuristics job manually to delete the inconsistent data.
So here the product 20508050 @ Mc5000-ZA59 the existing purchase
requisitions might not have anymaster data like Means of transport or PDS. Can you please delete
these inconsistent orders and run the heuristics again to check if
the orders are still created with inconsistent means of transport.
Also run consistenct reports /SAPAPO/TS_LCM_CONS_CHECK and OM17 and correct if any inconsistency is present.
BR,
Thushitha V. -
Live cache COM routine ended with own error code 38
Hi Experts,
the process chain got failed and it is showing the error as error 38.when we are doing the analysis the error itself coming in the extractin level and it is showing as errors in the source system and not more than that. Please gimme some solution how to solve it.Hello,
This is the object not found error for /SAPAPO/OM_PEGAREA
These error codes are generated if you try to access or manipulate an
object that cannot be found in the live cache (any more).
Normally this means that there is no object with the key (GUID) provided
by the ABAP.
Please execute the transaction /SAPAPO/OM17 inorder to resolve the
inconsistencies regarding missing pegkeys.
Best Regards
Barry -
Live cache error while correctingg inconsisitency in Resource
Dear Expert
While correcting inconsistency in live cache inconsistency is not getting corrected .
Error is Bucket vector does not exist in Live cache for resource WR201_1000_008
we are using Block planning in PPDS . I have checked SAPAPO/RST02 But resource is there in live cache it status is green
I am attaching error file
Thanks & Regards
VirenderHi Virender,
The problem is a SCM issue, so I already triggered "alert moderator" to forward SCM forum.
Best regards,
James -
Live Cache error with message number /SAPAPO/OM028
Hi Experts,
When I run RLCDEL program for deletion of obsolete SNP orders in the back ground , system shows livecache error alert with message number /SAPAPO/OM028 in the deletion job log. The details of message is "invalid order" or ABAP programming error. Live cache consistency checks are not resolving issue. Product release is 5.1 with SP08. Please suggest a resolution
Regards,
RaghavHi Raghav,
The sap notes 642503 & 973244 will fix your issue but they are for
versions 4.0 and 5.0 respectively.
You can write to SAP by creating a OSS message to update these
two message for version 5.1
This will resolve your issue
Please confirm
Regards
R. Senthil Mareeswaran.
Maybe you are looking for
-
I Downladed I-Tunes and i creat a playlist. i would like to put the music and some videos on my I-Phone 4S. How cai i do it?
-
Unable to open camera raw 6.0 from Bridge CS5
I just Installed photoshop CS5 and I am unable to view and open my NEF files in Camera Raw from Bridge CS5. It worked perfectly fine with Bridge CS4 and Camera Raw 5.1.0.30. Anyone has any suggestion other than using my old Bridge CS4. I have mas O
-
X220 - Thinkvantage button (restore original hard drive)
Hello -- If I boot using the ThinkVantage button, there is an the option to restore the original hard drive. Will this also restore the preinstalled software (specifically, Norton antivirus)? Thanks.
-
My late 2013 MBP Retina battery gets only about 4 hrs. What might be wrong?
My late 2013 MBP Retina battery gets only about 4 hrs. What might be wrong?
-
Problem with ip address in L3 switch port
Hi Experts, I am getting error when trying to give ip address to 3550 switch interfcae check below error SW-3500(config)# SW-3500(config)#int fa0/7 SW-3500(config-if)#no swi SW-3500(config-if)#no switchport mo SW-3500(config-if)#no switchport mode SW