Error on the installation of Web Application Server Java 6.40 SP9 on my PC

Hi, All,
I got the following error when I try to install Web Application Server Java 6.40 SP9 on my laptop using the CD that comes with the Book 'Java Programming with the SAP Web Application Server'. I'm currently using window XP.
The installation failed on the 3rd step 'SAP System Installation'.
I logged on my laptop as my own userid, but I should have the administrator's rights.
ERROR 2007-05-15 15:43:10
FSL-00001 System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'LoadUserProfile' with parameter (thread token for IT-899\j2eadm, j2eadm), line (616) in file (synxccuren.cpp).
Do you have any ideas what it means? Any inputs would be greatly appreciated.
Joanna

Thank you all for your replies. I downloaded the newest version of Netweaver from the SAP website and got it installed successuflly. Points rewarded...Thanks.
Joanna

Similar Messages

Installation of SAP Web Application Server Java 6.40 SP9 (SAP Press)

I wanted to install the Net WeaverDeveloper Studio and Development Infrastructureprovided on the CD (SAP PRESS) SAP Web Application Server. After starting the installtaion prcedure from the CD I get following message:
An Error occured during the installation of MaxDB > CentralSystem > Migration - Target System Installation. After pressing TheLogViewButton I get the LogBrowserInformation:
1.
WARNING 2006-08-15 12:47:25
Error 5 (Zugriff verweigert
) in execution of a 'RegOpenKeyEx' function, line (67), with parameter (SYSTEM\CurrentControlSet\Services\EraserUtilDrv10620).
2.
WARNING 2006-08-15 12:47:25
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EraserUtilDrv10620' does not exist on the 'localhost' host.
3.
WARNING 2006-08-15 12:47:25
The step setDefaults with step key Development_Workplace_SAPPress|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults was executed with status ERROR.
It's impossible for me to install this release. Could anyone help me to get the Product installed?????????
Thanks

Halo Mikael,
I haven't installed anti-virus functionality. In the meantime I could install the DB as well the NetWeaver seperately which doesn't help me further because I don't get any conection to the WebAs fro deployment. I get following message while trying to deploy:
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
I don't know where the engine has been installed and how to configure it.
If Itry to configure the eingine via WIndow>Preferences> SAP J2EE engine : engine installed on localhost ; then I get the following message:
No local engine could be found.
No systemcould be found under
Pal-Singh
sapmnt.
It's realy very frustrating. Could you please help me to get further?????????
Thanks with best regards.

ORA-20001 GET_BLOCK-ERROR during the installation of an application

hi people,
I' ve got the following error during the installation of an application in apex 2.2.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
Can anybody help me?
Message was edited by:
user512746

hi,
db-version is oracle 10g r2
os windows server 2003
the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
Message was edited by:
user512746
Message was edited by:
user512746

SAP Web Application Server Java 6.40 download is not working

SAP Web Application Server Java 6.40 is not working. There seems to be an issue with the server hosting the binaries.
Antoine Voiry

try this site
The SAP WAS 6.40 SP9 is in for of a zip file "WebAS640SP9.zip" it is about 1 GB
https://www.sdn.sap.com/sdn/downloads.sdn?page=webas640_sp9_maxdb_download.htm
Also you can go to the site
https://www.sdn.sap.com/sdn/downloadarea.sdn
and select "SAP NetWeaver Enterprise Portal on MaxDB, Developer Edition Sneak Preview"
to download it
Cheers
Sai

Errors in the logs of my Application Server

Hello,
I am using Oracle Application Server 9.0.4.0.0.
My services (ProcessManager & ASControl) start without any problem and I can log into the Enterprise Manager.
However, I have got the following errors in:
* em-application.log:
emd: Portal Configuration Interface failed to initialise: oracle.sysman.emSDK.emd.comm.CommException: Received unexpected response text :
<html><head><title>EMDAEMON</title></head><body text="#000000" bgcolor="#FFFFC0"><H1>EMDAEMON</H1><H2> HTTP/1.1 404 , Not Found<br></h2></body></html>
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1257)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1074)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getTargetInstances(EMDClient.java:366)
     at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.initEntrypoint(IASEntryPoint.java:116)
     at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.getTargetInfo(IASEntryPoint.java:299)
     at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.getEntryPoint(IASEntryPoint.java:226)
     at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.getEntryPoint(IASEntryPoint.java:277)
     at oracle.webdb.monitoring.hawkeye.PortalIntegration$InitThread.run(Unknown Source)
* emias.log:
ERROR iAS.IASEntryPoint initEntrypoint.120 - Unable to get iAS instances: Received unexpected response text :
<html><head><title>EMDAEMON</title></head><body text="#000000" bgcolor="#FFFFC0"><H1>EMDAEMON</H1><H2> HTTP/1.1 404 , Not Found<br></h2></body></html>
oracle.sysman.emSDK.emd.comm.CommException: Received unexpected response text :
<html><head><title>EMDAEMON</title></head><body text="#000000" bgcolor="#FFFFC0"><H1>EMDAEMON</H1><H2> HTTP/1.1 404 , Not Found<br></h2></body></html>
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1257)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1074)...
How could I fix these?
And could these errors have an influence on the following ( I have installed Application Server and Database Enterprise Edition 10.1.0.2.0 on the same machine)?
* I can run DB on its own fine.
* I can run AppServer on its own fine.
* If I start DB and then start the AppServer:
- I can use DB ok but not the AppServer. Error when I log into the Enterprise Manager.
* If I start AppServer and then DB:
- I can use AppServer but DB does not start cleanly.
Many thanks in advance.

You are going to have to provide more information...
The only time I ever encountered this was when I went to do a service call on someone with a loose connection on the plug right in the back of his iMac. Not every time but often when he wiggled the screen to adjust it he moved the power bar and / or power cable just enough to momentarily break contact.
We plugged everything in securely and the problem never recurred...
If yours is shutting down & restarting because of a power circuit fault there must be a problem with it that should be looked at.
M

Why the LDAP server does not accept any connection upon the installation of iPlanet Application Server Enterprise Edition 6.0 Test Drive Phase II

"I am carrying my tests under W2000 with all the default installation options. I've checked the user ID (admin), password and port are correct. However, I was not able to start the Netscape Console and also, the kregedit exited with messages:
Could not connect to LDAP server on cr7260et017 port 389 as user cn=Directory Manager: Can't contact LDAP server
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[18/Jan/2002 13:56:48:3] error: ENGINE-context_init_failed: EngineClassSpace ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ..."
(previously submitted to Portal Services/Wireless)

Hi,
I'm not sure if there are known issues with iAS test drive and Windows 2000 howevere I would like to help you in cracking the error.
The GXBIND error appears only when the iAS is not able to communicate with the directory server. In our case, let us proceed by the following...
1. Check if the directory server is running. Verify this by checking the services and look for an entry for directory server and it must look something like
"Netscape Directory Server 4.1 (machine name)" and the status is started.
2. Next, if you are not able to start the console of directory server, then you must check if the directory administrative server is running. This is also verified with the services and look for the entry...
"Netscape Administration Server 4.2" and the status is started.
3. Next, if both of the above are running, then you need to login to directory server console by using cn=Directory Server and issuing the password. If you are able to login successfully then, iAS will work, if not, then rectify the problem with directory server and I'm sure iAS will work.
4. If you have forgotten the password for cn=Directory Manager, then there is a work around for fixing the password in directory server and iAS.
Please let the outcome once you have done this.
Regards
Raj

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

Not opening the index page of WAS(web application server)

Dear All,
I have installed ABAP Stack and Java Stack. After installing I have tested WAS (Web application server) is working or not by giving http://localhost:50100/ in browser, but getting the error says "page can not be displayed" instead of opening index page.
Kindly share it if you have any idea regarding this.
While installing Java Stack, I got the following error while installing MAXDB (phase 9 which is "Install database server software" of 32).
ERROR 2007-05-17 17:46:02
MDB-07020 The database installer reported an error. Some database applications are probably still running. Check the log file sdbinst.log.
So, I have uninstalled MAXDB and continued Java Stack installation. Uninstallation of MAXDB could cause this problem or somthing else ..
could u please let me know if anyone has any idea...regd this
Kishore.

Hi Kishore,
On your server, please open Management Console MMC (Start -> Programs -> SAP Management Console), and if your system is not shown with the green light, right click it and select Start.
Also, can you please confirm that the instance number of your J2EE engine is 10.
Best regards,
Laziz

EVDRE encountered error retrieving the data from web Server

Hi,
I know this is the common/generic error message, following is our scenario:
We installed BPC NW 7.5 on our production box and configured F5 load balancing for two .NET servers.
We are getting the error "EVDRE encountered error retrieving the data from web Server"when we run the report EVDRE on APSHELL (original Appset). This is the fresh installation:
The workaround "Clear Local application information". Even this works only sometimes.
Is there anything else we should have configured on using two .NET servers?
Please suggest.
Thanks

hi Nagesh sorry for the delayed reply..
We changed some of the parameters at F5 switch like sticky time, timeout..
And the MDXPARSER connection to one of out application server was failling, thats why we did not had this issue consistently.
When ever the request goes to that app server fails. It took a lot effort to notice this since we were assuming the F5 switch was only causing the issue.
Thanks

Could not start the hyperion workspace-web application Error 1067

Hi,
I have installed hyperion from scratch in a distributed environment...everything was working fine.......i.e. shared services, workspace, essbase, sql server, and hfm. I was able to logon and navigate different options in the hyperion products...but essbase stopped working when I re-started all four servers ....?
(1) When I restarted all four servers and stopped and restarted all hyperion services as per giving sequence then everything works fine but essbase EAS console and workspace web console...i was getting error message " could not connect to administration server" whenever i try to connect EAS console to essbase then I went to services there I saw workspace agent and workspace web application service is down.
(2) as soon as I started those both services then my shared services automatically stopped but I was able to logon in Essbase console and workspace console but my shared services are down...
(3) as soon as I start shared service they started but my workspace agent and workspace web application automatically stopped...and when I try to start again workspace web application then I get this error "[ Could not start the hyperion workspace-web application services on local computer. Error 1067: the process terminated unexpectedly]"
I have been searching online and googling but have a hard luck to get some best solution for this...can some one help me or guide me to walk through with this issue...
Thank you very much in advance ...
Regards,
Safi

I solved this issue...It was with Hyperion Services those were stop responding some how.....but I stopped each service and restarted then those started working again...
Regards,
Safi

SAP Web Application Server 6.40 Error

Hi. I am trying to install the SAP Web Application Server 6.40 but have encountered this error when extracting this file SCS.SAR with the SAPCAR.exe
Error Message:
SAPCAR: could not open for writing SAPCAR.exe <error 28>. The process cannot access the file because it is used by another proccess.
I have checked this proccess is not running at all. Or is it used by some other programs. Please advise.
Edited by: pong pong on Jul 30, 2008 3:58 AM

Hi,
If you are trying to uncar the SAR file try to do it with -R option
with target directory to extract files.
sapcar -xvf <SAR File> -R <drive>:\<DIR>\<DIR> .
I hope sapcar is trying to open a new sapcar file to throw the above error.
Hope it helps you out.
Rgds
Radhakrishna D S

Can you install the Office Web Application Server on one of the App Servers for SharePoint 2013?

Hi,
Is it possible to run Office Web Application Server (shows preview images for docs and allows Notepad, Word, Excel to work etc) on one of the SharePoint 2013 App Servers. I don't want to have to create a new server. It talks about setting
up a farm.
Better still how the feck do you switch this functionlity off - I always remember it being a pain in the arse. We accidentally ran the first part of the configuration on one of the SharePoint App Servers only to find out our subscription does not
have this download (bar stewards changed this Nov 2014 - just after started contract).
Help would be much appreciated as close to go live
Thanks.
John.

Hi John,
Please reboot the server at the very beginning and test the issue again.
Quote from you:
Problem is I get Internet Web Page cannot display the webpage everytime I click in a excel document, powerpoint document, notebook link or the preview
Please post the url in browser address here.
If you just executed the command below:
Add-WindowsFeature Web-Server,Web-Mgmt-Tools,Web-Mgmt-Console,Web-WebServer,Web-Common-Http,Web-Default-Doc,Web-Static-Content,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Security,Web-Filtering,Web-Windows-Auth,Web-App-Dev,Web-Net-Ext45,Web-Asp-Net45,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Includes,InkandHandwritingServices
It just install some windows feature to the current server, we can find it should be done before installing several server products.
Could you please verify if the command you executed is the same as the one above?
You could also go to local disk and check if there is OfficeWebApps folder under C:\ProgramData\Microsoft\?
If you check in Control Panel > Programs, is there any feature related to Office Web Apps?
If you have confirmed there is no Office Web Apps feature installed, please go to SharePoint document library settings, and make the document to open in client, does it work?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Error in Downloading the Text file on Application Server

Hi All,
          I am working on ECC6.0. I have written a program in whcih I am downloading the text file on
          application server in UTF-8 format. However when I am opening this file in Excel I am getting
          garbage value for some characters(as Excel does not support UTF-8 format). So now I
          want to download the data on application server in text file in non unicode format(Like ANSI or
          other non unicode format) which is supported by excel. When I am writing the code as
          OPEN DATASET DN_FILE FOR OUTPUT IN LEGACY TEXT MODE it is giving me dump saying
          CHARACTER CONVERSION FROM CODE PAGE '4102' to CODEPAGE '1100' NOT POSSIBLE.
          Same in case if I add the code OPEN DATASET DN_FILE FOR OUTPUT IN LEGACY TEXT
          MODE CODE PAGE '8000' is also giving dump.
          So please let me know how can I download the file in non unicode format ?
          Any help would be greatly appricated.
Thanks & Regards
Jitendra Gujarathi.

OPEN DATASET l_filename FOR INPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS.
CHECK sy-subrc EQ 0.
DO.
    CLEAR wa_file_content.
    READ DATASET l_filename INTO wa_file_content.
    IF sy-subrc EQ 0.
      APPEND wa_file_content TO it_file_content.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
CLOSE DATASET l_filename.
t_filedata[] = it_file_content[].
can you use like this.

Netweaver administration and SAP Web Application Server r the same?

Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
Malti

Hi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh

Error on the installation of Web Application Server Java 6.40 SP9 on my PC

Similar Messages

Maybe you are looking for