Error on WWI server EHS_GLM_GENSERV: Results file not found on production

Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================

Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

Similar Messages

Terminal Server User license file not found or User ID not matched.

Hi,
I recently went for the Process Runner, downloaded trial version and wanted to work with Ides system, but at the very first step the system throws the following error:
"Terminal Server User license file not found or User ID not matched.
and the details are as follows:
Process Runner 2008
Version : 4.20.10
Supported file version: 7.3
Current Framework: 2.0.50727.42
User Name: Demo User
Licensed To: Demo Company
Product Id : PR-ALL-DR-MTH-CU
Full Version : 4.20.10.9579
Current UserID : Administrator
License Type : Evaluation/Demo License
Evaluation Days : 1 of 30
Licensed Uses : 5 of 15
Expiration Date : 12/31/2011
COMPANY : Demo Company
MAX_ROWS : 30
MAX_THREADS : 3
USER : Demo User
Current Node Id : DAAB-AA43-58DB-00DB-4862
Max Instances Allowed : N/A
OS-Office culture info : en-US | en-US | en-US | en-US
C-Info : en-US
Computer : SAPSERVER
Current Domain : WORKGROUP
OS : Microsoft Windows NT 5.2.3790 Service Pack 1
AppPath : D:\Vijj downloaded\Process Runner
MyDocPath : C:\Documents and Settings\Administrator\My Documents\Innowera
Terminal Server User license file not found or User ID not matched.
Can anybody guide me please.
Thanks.

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Wget command result - File not found

Ok I went to www.sunfreeware.com and downloaded on my pc wget ( file name wget-1.11-sol10-x86-local). Walked it over and unpackaged succefully on my Sun 10 X86 box.
When I type wget anything (wget -v, wget http://XXXXX.XXX.XXX, wget -h, wget -V, wget) all the results are the same: file not found
The wget application is in two locations
usr/local/bin and usr/sfw/bin
Using Terminal I got to each directory and I still have not luck when I type wget, result
file not found
Am I doing somthing wrong. This is got to be easy.

Hi, i have described the procedure to install wget in my blog:
[http://blog.serversolaris.com/2008/07/administration/install-wget-in-solaris-smcwget.html|http://blog.serversolaris.com/2008/07/administration/install-wget-in-solaris-smcwget.html]
Walter Lamagna

Error 1311....source file not found Adobe Acrobat 8.2.0

I have Vista. I keep getting installing boxes and error messages:
Error 1311. Source file not found: C:\Program Files\Adobe\Acrobat 8.0\Setup Files\{AC76BA86-1033-0000-7760-000000000003}\Data 1.cab.
Verify file exists and that you can access it.
I cannot find that file in the set up, so it's obviously missing. I have tried uninstalling, but still get the error messages, even though the Reader is working on my PC...it's just so annoying as I am constantly cancelling installation and cancellation boxes. Can I install this file?
Thanks!
Message was edited by: Woodlandia36

"I tried to uninstall Adobe Creative Master Suite CS3. It hasn't uninstalled completely and has left traces of it still being on my system."
You could always "wipe the slate" clean.
Any and all Adobe folders would be manually deleted. (Shift+Delete to remove them from the hard drive, not send to the recycle bin)
Click Start and Run. Type regedit and hit enter.
Under HKEY_LOCAL_MACHINE\SOFTWARE delete all Adobe Folders (not just the keys, the whole folders - click once and hit Delete)
Under HKEY_CURRENT_USER\SOFTWARE do the same
Under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon Change the value for the AllocateCDRoms entry to 0. (Right click and select Modify - type 0 and hit enter)
Exit the Registry Editor.
Reboot
You should not see this error anymore
Note: I only recommend this because you indicate that you have already attempted removing the entire creative suite. This will render it unfunctional if you do it. If you aren't comfortable with editing your registry, disregard these steps.

POA won't load after Server Crash - 8209 file not found err

Groupwise server crashed recently (apparently from bad RAID controller, which has been replaced). Server is back up an running now (SLES 10 sp3 VM running under XEN, GW 2012 sp1). Have performed a rebuild on Primary Domain and also on single Post Office. MTA loads OK, as does GWIA but POA fails to come up, giving "Path Not Found - 8209 error" message. Path to WPhost.db is correct both in C1 and in the startup file. When loading POA with --show option, I see the aforementioned error and then when I clear that I see on the screen (for a brief moment):
"Rebuilding Guardian Database because of C0221... please stand by"
Then it terminates and screen disappears.
I know that restoring from backup is one option, but that cannot be done until Monday at the earliest and that, of course, is dependent on having good backups. Therefore, I was wondering if there is a way to fix this problem to get the system back up quicker. Any ideas would be greatly appreciated! Thanks.
Don
P.S. There is only 1 Primary domain and 1 PO in this small GW system and yes, I know, one should have at least 1 secondary domain.

Thanks for the suggestion, Danita.
OK, I backed up all copies of ngwguard.* from the PO directory. Then, I deleted ngwguard.db and copied the ngwguard.fbk (same exact file size as the deleted ngwguard.db) from ofmsg/guardbak folder to the PO directory as ngwguard.db. Now, I did notice that there was no ngwguard.fbk in the PO directory but instead a ngwguard.dba file, which I left as is. I then started the POA - ./gwpoa --show @po.poa & and now it no longer gives me "Path Not Found" error, but instead it displays:
"opened a file that was not a flaim file C03F"
I click OK on this warning and then POA monitor screen displays for 2 seconds "rebuilding ngwguard.db ..." before it bails and terminates.
So, is it looking more and more like a ngwguard.db problem as opposed to wphost.db? And, I am of course curious why using that backup of ngwguard would not work. In any event, today I will be trying to get backups of wpdomain.db and wphost.db off of tape and perhaps I should restore ngwguard.db as well - this is dependent, of course, on having a good backup that is restorable. If that is not the case, is there an option to rebuild the ngwguard.db file? Thanks.
Don
Originally Posted by dzanre
donahueit wrote:
> At this point could this be more a problem with NGWGuard.db than wphost.db????
> I am starting to wonder.
Quite possibly. You do need both a wphost.db and an ngwguard.db file for the
POA to properly load. There should be two relatively "new" copies in the
system:
ngwguard.fbk in the same folder as the PO, and then the ngwguard.fbk in the
ofmsg/guardbak folder.
Try copying one of these as ngwguard.db in the PO folder, and if that doesn't
work, you will need to go to "backup" to restore.
Danita
Novell Knowledge Partner
Do you have Willem Bagchus' GW 2012 Admin Guide?
http://www.facebook.com/caledonia.net

Error message upon sign in stating "File Not Found (404)"?

I get this error when I sign in and I can't convert PDF. What do I do?

Hi again wjm129,
This issue is typically browser-related, so it's odd that clearing the cache and using a different browser didn't resolve the issue. What happens when you try to use ExportPDF from within Adobe Reader?
If that doesn't work, either, please get back to me about the specifics of your system, and we'll take it from there:
Operating system
Browser/version
Firewall/proxy settings (are you on a networked computer?)
Results of trying from within Adobe Reader
I look forward to hearing back from you, so we can crack this mystery.
Best,
Sara

ERROR MESSAGE: Blu-Ray Object: Export File Not Found

What does this mean? I keep getting it during the build process.
Obviously the file is there and can be imported and played in AE or Premeire. It is an uncompressed 1280x720 avi at 23.97fps. My burner is an LG GGW - H20L.
Any insight on this is appreciated.

I had the same problem and changed the preset from MPEG-2 to H.264 and about 20 hours later (on a quad core machine) had a working Blu-Ray disk.

PSE 9 Install Error 1311....Source File Not Found

Just got PSE 9 for Christmas. Tried to install it and got this msg repeatedly in the first minute of install. I decided to take it back thinking it was the disk. Got a new disk and still have the same problem. I've tried all of the troubleshooting options from the website, and I even wiped my lap top clean this morning. Nothing has helped. It's driving me mad. Any help would be greatly appreciated.

Can you please check if the solutions/ troubleshooting steps mentioned in the below links can help you out??
http://kb2.adobe.com/cps/405/kb405578.html
http://kb2.adobe.com/cps/858/cpsid_85843.html
Let us know,
Regards,
Ankush

I get an error message 7-Zip file not found

When I am trying to download Mozzila I keep getting an error message that states 7-Zip file not found and it won't let me download the browser.

Hello psimonsen, you don't need 7-zip program to download official firefox, see: [https://support.mozilla.org/en-US/kb/install-firefox-windows Install Firefox on Windows]
another official link : http://www.mozilla.org/en-US/firefox/all/
thank you

When sycning photos get error message: can't sync file not found

Trying to sync my wife's new 3gs to my macbook Pro. Never had any problems syncing my phone. With hers I can sync everything but photos. I get an error message saying can't sync file not found. I have no idea what file it is looking for or whether it is missing from the phone or my computer.

Thanks so much. The file path wasn't exactly the same as the link said, but it was close enough that I found it in a few minutes. Trashed the ipod cache as instructed, and now all my iphones and ipods have synced photos. Thanks again, would have never found that file on my own.

Getting error msg Server returned:AXLParser: 'maxy' not found in ENVELOPE

I get error message. Server returned:AXLParser:'Macy' not found in ENVELOPE
Cannot get graphics on Lincoln county GIS. Please advise

It's a server error. Nothing to do with your computer.

Portal is down and HTTP 404 - File not found

Hi All,
our Portal dispatcher is running and server is not connected. shows the following error...
HTTP 404 - File not found
http://server: 50000/index.html - im able to get
http://server: 50000/irj/portal - getting...
HTTP 404 - File not found
Please let us know urgently what went wrong..
Thanks
Pradeep

Hello Pradeep,
Please check the below mentioned link :
http://help.sap.com/saphelp_nw70/helpdata/en/43/54cdc48d395f6ce10000000a1553f6/content.htm
You can check the logs of the server for details.dev_bootstrap,dev_jcontrol,dev_serverX,std_server.out files can give you the details of what is wrong with the service.
Also make sure that you are typing the correct url.
http://<hostname>:5<instance no.>00/irj/portal.
Regards,
Sandeep.
Edited by: Sandeep Sehgal on Mar 25, 2008 7:38 PM

ITunes: "File not found"

I have been having a problem for quite some time with iTunes and I can't seem to get an answer as to how to resolve it. On many of my songs listed in the iTunes library, when I click on the song I get an error message to the effect of "File not found. Would you like iTunes to try to locate this file?", and when I say "yes" to this, I get my "iTunes Music" folder (where my music files are stored) and I have to search around and find the file (which I am usually able to do) and then it plays. However, when sometime later I may try to play the song again, I get the same error message and have to go through the same process. Can anyone explain why this may be happening and how I can prevent it from happening again? What is the simplest way to store your music files on your hard drive to ensure iTunes captures everything and does not have difficulty locating files? Many thanks for your help and advice!

This really shouldn't happen. There are no setting in iTunes to prevent it.
If you want to do a bit of detective work, you find out where iTunes this the missing file is located.
If you want to try this, identify a track or two with exclamation marks.
Open iTunes Library.xml with WORDPAD. (it's in the iTunes folder)
Use search to look for the track or album name. If you know the actual file name you can use that but watch out for spaces, the space character is represented by %20.
WHen you have found a track or album you need to scroll to the line starting:
<key>Location</key>
This contains the path and file name.
Is it correct, or something different?
That might give you clue about files being moved or renamed.
If it is all correct them something odd is happening with iTunes.
Message was edited by: polydorus

Blue-Ray Object: "Menu"; Export File Not Found--Any Clues?

Trying to build a Blue-Ray DVD in CS3 (version 3.0.1.008). Project has motion menus and previews without errors. Upon trying to build either a disc or image I get the error
Blue-ray object: "Menu"; Export file not found.
Where "Menu" is the name of one of the sub menus in my project.
Has anyone seen this error? What is an Export file? When and how does it get created?
I have successfully burned this project to a standard DVD format.

I have the pleasure of closing out my own question. I found the following post that was the clue I needed.
http://forums.creativecow.net/readpost/145/857374
It would appear that the Blue Ray build process is a lot more sensitive to file naming. I brought into my project a menu that I used as a starting template, I edited it in Photoshop and then renamed it in Encore. During the Blue Ray build process Encore rendered the menus to the original template names, but when it needed them to build the DVD it looked for the files that had the new names I had given the menus in Encore.
Here is the fix. I exported the final menus using the Save as Template function in Encore. I then re-imported them as menus and relinked them to the DVD assets. Everything worked fine from that point on.
The interesting thing is this did not happen when building a standard DVD using the same menus.

Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors

Summary:
With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
Steps to Reproduce:
Trying to render to Quicktime files using network shared folders as a destination:
Unable to open file. (-1610153459)
The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
We do not have a D: drive in our Windows 7 workstations, they are all C: only.
It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
Any help would be appreciated.
Cheers!
Expected Results:
Error -43: file not found
Actual Results:
The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
Regression:
All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
Notes:
All software that uses quicktime movie exports showed this error.

Not sure what file your are referencing? Thanks for your suggestion, however, it's not relavant.
It renders fine if you render to either the UNC path or the first mapped drive.
i.e. If you have two mapped drives G: and H:
they both point to \\fileserver\share1\folder
If you render to H: it will fail, if you render to G: it works! Same path, same user, same permissions.
The only difference is H comes after G, so it fails... BUG. If it was to do with anything else, underscores, permissions etc, it would fail on both.

Error on WWI server EHS_GLM_GENSERV: Results file not found on production

Similar Messages

Maybe you are looking for