Error open dynpro in se80

Hi,
I'm trying to open dynpro in se80 but it isn't open and gives me this error:
"Element TC_DYN_TAB in screen MP965300 2000 has an invalid value for line, column or length"
If I try to activate I have no errors.
Can you help me please?

Hi,
Try doing this:
1. Close your NWDS
2. navigate to <installation drive>:\Documents and Settings\<username>\SAP\workspace\.metadata
Delete the .registry file.
3. Open NWDS
Regards,
Murtuza

Similar Messages

Sending smartform output as PDF attachment, Error opening PDF attachment

Hi Experts,
I am using the code form the following link to send a smartform output as PDF attachment. I can able to see the message, but can not open PDF document.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/convertSmartformtoPDFformat&
The information should be on my smartform are some text, company logo and a barcode.
With all of these received error: "There was an error opening this document. The file is damaged and could not be repaired."
I tried different ways like only text, text with company logo, text with barcode. I got the following errors:
An unrecognized token 'Td0' was found
There was problem reading this document(16).
There was problem reading this document(111).
Does anyone have idea of these ? Your help is greatly appreciated.
Thank you,
Surya

please see this code ... for sending the Email as PDF attach file,
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_sender LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
 INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
 wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
 gd_eventparm LIKE tbtcm-eventparm,
 gd_external_program_active LIKE tbtcm-xpgactive,
 gd_jobcount LIKE tbtcm-jobcount,
 gd_jobname LIKE tbtcm-jobname,
 gd_stepcount LIKE tbtcm-stepcount,
 gd_error TYPE sy-subrc,
 gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
 it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_sender_type LIKE soextreci1-adr_typ,
 gd_attachment_desc TYPE so_obj_nam,
 gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
 gd_destination LIKE rlgrap-filename,
 gd_bytecount LIKE tst01-dsize,
 gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
 INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
 c_no(1) TYPE c VALUE ' ',
 c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
 PERFORM get_job_details.
 PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
 PERFORM convert_spool_to_pdf.
 PERFORM process_email.
 if p_delspl EQ 'X'.
 PERFORM delete_spool.
 endif.
 IF sy-sysid = c_dev.
 wait up to 5 seconds.
 SUBMIT rsconn01 WITH mode = 'INT'
 WITH output = 'X'
 AND RETURN.
 ENDIF.
ELSE.
 SKIP.
 WRITE:/ 'Program must be executed in background in-order for spool',
 'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
 INTO TABLE it_tbtcp
 WHERE jobname = gd_jobname
 AND jobcount = gd_jobcount
 AND stepcount = gd_stepcount
 AND listident <> '0000000000'
 ORDER BY jobname
 jobcount
 stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
 message s004(zdd) with gd_spool_nr.
 gd_spool_nr = wa_tbtcp-listident.
 MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
 MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
 IMPORTING
 eventid = gd_eventid
 eventparm = gd_eventparm
 external_program_active = gd_external_program_active
 jobcount = gd_jobcount
 jobname = gd_jobname
 stepcount = gd_stepcount
 EXCEPTIONS
 no_runtime_info = 1
 OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = gd_spool_nr
 no_dialog = c_no
 dst_device = c_device
 IMPORTING
 pdf_bytecount = gd_bytecount
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
 TRANSLATE it_pdf_output USING ' ~'.
 CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
 it_mess_att = gd_buffer.
 APPEND it_mess_att.
 SHIFT gd_buffer LEFT BY 255 PLACES.
 IF gd_buffer IS INITIAL.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
 gd_sender_type = space.
ELSE.
 gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
 tables it_mess_bod
 it_mess_att
 using p_email
 'Example .xls documnet attachment'
 'PDF'
 gd_attachment_name
 gd_attachment_desc
 p_sender
 gd_sender_type
 changing gd_error
 gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
 EXPORTING
 spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
 it_attach
 using p_email
 p_mtitle
 p_format
 p_filename
 p_attdescription
 p_sender_address
 p_sender_addres_type
 changing p_error
 p_reciever.
DATA: ld_error TYPE sy-subrc,
 ld_reciever TYPE sy-subrc,
 ld_mtitle LIKE sodocchgi1-obj_descr,
 ld_email LIKE somlreci1-receiver,
 ld_format TYPE so_obj_tp ,
 ld_attdescription TYPE so_obj_nam ,
 ld_attfilename TYPE so_obj_des ,
 ld_sender_address LIKE soextreci1-receiver,
 ld_sender_address_type LIKE soextreci1-adr_typ,
 ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
 ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
reward points if it is usefull ....
Girish

ERROR: Web Dynpro component does not exist

Hi!
Trying to open different menu items in PPM I get browser with error:
500 SAP Internal Server Error
ERROR: Web Dynpro component does not exist (termination: RABAX_STATE).
Url looks like: someurl.com:8010/sap/bc/webdynpro/sap/inm_workcenter_app?IV_APPL_TYPE=RPM&IV_OBJ_TYPE_R=RPH&IV_POR…
How can I fix it?

Hi Maxim,
Refer the SAP note in the below thread.
ERROR: Web Dynpro component does not exist (termination: RABAX_STATE)
Regards,
Ravi

Error opening zip file:ZipException

Hi,
I am getting the Log Error in NWA while running the Web Dynpro Java application..The Error is,
java.util.zip.ZipException: Error opening zip file /usr/sap/EPD/JC00/j2ee/cluster/server0/./log/archive/_log_system_logging.log1233875882599.zip
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:140)
at java.util.zip.ZipFile.<init>(ZipFile.java:155)
at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchiveInfo(AbstractLog.java:328)
at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchives(AbstractLog.java:454)
at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchives(AbstractLog.java:477)
at sun.reflect.GeneratedMethodAccessor357.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62)
at java.lang.reflect.Method.invoke(Method.java:391)
Can any one explian me why this error occurs.And How to Rectify this error.Please suggests the solution for this problem.
Thanks & Regards,
SatheshKumar R

The archive file is empty that why this exception is coming, Find and remove the empty archive file.
OR
To solve the issue you have to close the previously opened streams in your application, when you don't need anymore
hope it will hlep you.
Thanks

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Can not open pdf file in Outlook 2010 - error opening document

when I click on the PDF file in the email (Outlook 2010), Adobe opens but it pops a window "There was an error opening this document. Access denied". If I save the document as a file, aka to the desktop, I can open it then.
Also also I click on the ok button in adobe, it posted a Runtime error! application has requested the RunTime to terminate it in an unusal way.
has anyone seen this issue. Desktop is using Windows XP, 4 gig ram, Adobe X verision 10.0.1

Did you try this? It worked for me.
http://www.darrenstraight.com/blog/2010/12/16/adobe-reader-x-there-was-an-error-opening-th is-document-access-denied/
Open up Adobe Reader X
On the Toolbar Menu go to Edit > Preferences
Go to the general tab under Categories.
Untick “Enable Protected Mode at Startup”
If asked if sure, click Yes and then Ok.
Now close Adobe Reader X and try opening the PDF again.

With OSX10.7.5 and Adobe Reader 11.0.02 when I try to open a PDF downloaded from the web I get 'There was an error opening this document. This file is damaged and could not be repaired. Preview will not open either. Older PDFs OK.

I am running OS X 10.7.5 and Adobe Reader 11.0.02. In the last few days I have been unable to open PDF's downloaded from the web. Reader gives the error message 'There was an error opening this document. The file is damaged and could not be repaired'. Removing Reader and trying to use Preview to open these files give the error 'Preview cannot open this file. It may be damaged or use a file format that Preview doesn't recognise' (or something like that). Downloading the same files with Reader removed from my Mac Preview opens the files OK.
I was recently prompted to update Adobe software but did not note exactly what the update was nor when it was done.
Reader and Preview will both open PDFs I downloaded a week ago. Reader will also open files downloaded on another Mac running OS X 10.0.0 and copied to my Mac. Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

There was an error opening this document. Access denied.

Greetings,
When I did my taxes last year (March 2012), I downloaded some pdf files from the IRS. Form 1040 was a writable file and I filled it out as needed. This file was saved on a Vista machine running XP. A few months ago, I upgraded that pc to be Windows 7 SP1.
Today I'm getting ready to do my taxes for this year. When I double click on last year's Form1040.pdf, I get the following error message:
There was an error opening this document. Access denied.
Interestingly, I can open other pdf files, like the Form 1040 Instructions. I do not think that I password protected my Form1040.pdf. The reason that I think it isn't password protected is because I'm not being prompted to enter a password.
I copied the file to an old spare XP machine (XP Home, version 2002, SP3) that I have and it opened fine. It did not prompt for a password. I printed copies of last year's forms from that XP machine, so this isn't an emergency for me, but it is mildly annoying that I can't figure out what's wrong.
I have Adobe Reader XI version 11.0.2 installed on both machines (the Windows 7 machine and the old XP machine).
To summarize, it was created on Vista, I can't open it with Windows 7, but I can open it with XP.
Normally I would consider uploading the file in question, but in this case, I hope you'll agree that might be a bad idea!
Advice on how to get this to work on Windows 7 would be appreciated.

Pat Willener: Thanks! That solved the problem.
For anyone else having this problem, here's a detailed list of how I used Pat's advice to solve my problem:
1. Right click on the problematic file
2. Select Properties
3. Select the Security tab
4. Press continue
5. In the "Permissions for MyFile.pdf" dialog, press "Add".
6. In the "Select Users or Groups" dialog, press "Advanced".
7. The next dialog that pops up is also named "Select Users or Groups". Press "Find Now".
8. Scroll down the list of search results until you find your username.
9. Double click on your username.
10. Press ok in the "Select Users or Groups" dialog.
11. Press ok in the "Permissions for MyFile.pdf" dialog
12. Press ok in the Properties dialog.
done.

Adobe Reader 11.0.06 "There was an error opening this document. Access Denied"

Windows 7 64-bit
If I go into My Windows 7 Documents Library folder (which is redirected by Group Policy to a network share), I get "There was an error opening this document. Access Denied". If I then map a drive to the share, I can open the PDF without the error message.
I've read a workaround for some time now for older versions has been to uncheck Enable Protected Mode at startup under Security (Enhanced) in Preferences. I find this does work but this is probably not the best way to handle this situation.
I've also read one person removed the desktop.ini on the desktop to resolve.
Is there any official response from Adobe on this issue that I can be pointed too? Are others still having this issue?
We plan to update several thousand clients and I'd like resolve this issue before we do.

We tried 11.0.05, 11.0.06 and 11.0.07 with the same result on different computers with different local Admin accounts.
When we re-install 10.1.0 the issue is gone and Protected Mode is enabled.
We then returned to 11.0.06 or 11.0.07
I'm logged in with a local Admin account.
I turned on Protected Mode Logging and captured what happens when I attempt to double click a pdf file in my Documents Library with 11.0.06 installed. Access Denied.
I then doubled clicked the file from a drive mapped to the same share and the file opened.
[06:11/16:02:40] Adobe Reader Protected Mode Logging Initiated
[06:11/16:02:41] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \REGISTRY\MACHINE\Software\Adobe
[06:11/16:02:41] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:41] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \REGISTRY\MACHINE\SOFTWARE\Wow6432Node\Adobe
[06:11/16:02:41] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:41] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \??\Volume{a758d00a-e81c-11e2-b856-806e6f6e6963}\$Extend\$Reparse:$R:$INDEX_ALLOCATION
[06:11/16:02:41] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:41] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \??\UNC\nawrcs-bbc1fs\mousers\u212940\Documents\Citrix Adding a Printer.pdf
[06:11/16:02:41] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:41] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \??\UNC\nawrcs-bbc1fs\mousers\u212940\Documents\Citrix Adding a Printer.pdf
[06:11/16:02:41] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \??\C:\Users\c702939\AppData\Local\Microsoft\Windows\Caches\cversions.1.db
[06:11/16:02:47] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:47] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \??\C:\Users\c702939\AppData\Local\Microsoft\Windows\Caches\cversions.1.db
[06:11/16:02:47] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \??\C:\Users\c702939\Desktop\desktop.ini
[06:11/16:02:47] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:48] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:48] real path: \??\C:\Users\c702939\Desktop\desktop.ini
[06:11/16:02:48] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY

With Reader XI There was an error opening this document. Access denied

Hi there, It looks like I have a simular problem. I also get the error "There was an error opening this document. Access denied." This when I tried to open the file by clicling on the file. When I try to open the file from out Adobe reader it gives me the error "You don't have permission to open the file" I use Adobe XI. My OS is W8.1 By clearing protected mode doesn't help. This is what I found sofar: Only the PDF files in the documents and subfolders are giving me this error. PDF files in other folders are fine. When I copy PDF files from the documents folder to Desktop they open without any problem. First I thought I might be a permission problem with the Documents folder, but I have full access. Other files in the Documents folder like Word and Excel files open fine with MS Office. My laptop has WinXP and is shared with my PC when I open PDF files on my laptop by using the network share they open without problems. So it looks like only the PDF files in my Documents folder. I'm not sure but before upgrading to W8.1 from W8.0 I can't remember if I had this problem, but I think I did not have it. To make it even more interested is that I have also Adobe Acrobat Writer on my PC what I use for my buisiness. When I open the PDF files with this program they open without any problem. Therefore I believe it is not a permission problem, I still believe it is a problem with Reader XI, but than only after upgrading to W8.1, but as I already mentioned I'm not sure for 100% only that sofar I know it never happened under W8. Has anyone out there simular problems? And hopefully with a fix.

This is what I did sofar: Deleted reader XI and reinstalled same problem.
Because I think the problem is with reader XI I deleted again XI and installed reader X.
With this version I can open PDF files located in the documents folder without any problem.
For now I keep using version X until they fixed version XI
This proves that reader XI will not work under W8.1 when opening PDF files in de documents folder.
Bennie

Error opening PDF downloaded from Interactive Report

hi -- I'm getting an error opening a PDF file downloaded from an interactive report.
I've seen on the forum that this could be related to the size of the file, but I've tried
this out on 10-row results (1k files) and it's still an issue.
I save the file to my file system. If I try to open it in Adobe Reader, I get:
File does not begin with '%PDF-'
and
Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded).
If I try to open in Internet Explorer, I get:
File does not begin with '%PDF-'
Other users are having the same problem. Download to csv and open in Excel works fine.
Do I need to have special print attributes for this? I didn't think so... I'm just using the defaults
(response header = report settings, content disposition = attachment).
Ideas?
Thanks,
Carol

Hi,
I'm having the same problem that was described above, and my site does have BI Publisher installed, and it does successfully produce readable pdfs for many reports.
But there are other reports, even reports produced using the Apex Wizard and all defaults, that just keep producing the same Adobe Reader error reported above, ie
"Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded)."
Any suggestions?
Cheers,
Peter

Error opening XDP file from Internet Explorer

Problem: We currently can view pay check online. But users always have problem printing online pay check. So we decided that we will convert online web pay check to PDF so that users can easily print it. We are on Peoplesoft. - I have created a PDF form using Adobe LiveCycle Designer 7.0 (which looks exactly like paycheck) - This form is stored on web server(IIS). - Written code (PeopleCode) which will take data from online pay check page and populate the blank PDF form stored on server. - Used ContentType("application/vnd.adobe.xdp+xml") to display PDF in browser. The code that can be seen on browser when %Response.SetContentType("text/plain") is used. --------------------------------------------------------------------- <?xml version="1.0" encoding="UTF-8"?> <?xfa generator="XFA2_0" APIVersion="2.2.4333.0"?> <xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/"> <xfa:datasets xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"> <xfa:data> <form1> <netpay>99</netpay> <paybegindt>03/28/2006</paybegindt> <payenddt>03/29/2006</payenddt> <checkdt>03/30/2006</checkdt> <name>Kashyap,Nitin</name> <eeid>12345678</eeid> </form1> </xfa:data> </xfa:datasets> <pdf href="http://server.na.com/wwhrxa/final.pdf" xmlns="http://ns.adobe.com/xdp/pdf/"/> </xdp:xdp> --------------------------------------------------------------------- It worked fine first time GREAT!!!. After that I keep getting this error message. ERROR MESSAGE There was an error opening this document. This file is already open or in use by another application. The browser I am using is Internet Exlorer (Ver 6.0). I tried deleting cashe and re-booting with no use. Adobe reader version is 7.07. I also tried on couple of other PCs, but got same error. Any suggestions or hints would be of great help. I can also be reached at [email protected] Thanks! Nitin

Still working to get this issue resolved. Any pointers would be of great help. Thanks...

Another "there was an error opening this document. this file cannot be found"-question

Hello people, as the title suggests, i have another question regarding the "there was an error opening this document. this file cannot be found" error. I have searched on Google and on these forums but i havent found an answer to my particular case (sorry if i overlooked it).
I work at a supportdesk for a company that uses Windows XP with Adobe Reader version 8.1.3.
Users are getting this error when they access a PDF file placed on a (mapped) networkdrive. Contrary to some other cases i have found on this forum, spaces are handled without a problem. But a comma in the name of one of the folders that contain the PDF file are what causes this error.
i.e.:
Opening the following path results in the error:
L:\X, Y & Z\adobe.pdf
Removing the comma so the path becomes:
L:\X Y & Z\adobe.pdf
works just fine.
So far our workaround has always been to simply remove the comma and move on, but I've been wondering why this comma is such a problem for Adobe Reader. As far as i know Adobe Reader is the only program we use that has this issue, M$ Word works just fine with it to name an example.
To sum my questions up:
- Why is comma (,) a problem for Adobe Reader?
- Have i missed any patches/new versions where this issue has been addressed?
- What is Adobe's stance on this, and are there any plans to "fix" this?

Ok, nevermind, we just found the problem
It's not Adobe Reader that is causing this, but another program the company uses to manage/distribute/authorise programs that users are allowed to access (Scense). I had never even considered another problem could have caused this for Reader.

"There was an error opening the database for the library "~/Pictures/Apert"

Hey everyone,
There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
⌥-click Aperture (not the library)
You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
Close Aperture
⌃-click both the old and new libraries and "Show Package Contents."
Open the folder "Database" in both libraries.
Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
Close both folders.
⌘⌥-click the old library.
NOW, I got the Aperture Library First Aid dialog.
Rebuild the library (3rd option)
Wait a while.
Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

Hey All,
To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
"There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
Does anyone know away to get it to work again and have the edits still there?
I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
Does apple have a support number I can call? Any help would be greatly appreciated!!

Error open dynpro in se80

Similar Messages

Maybe you are looking for