Error opening data base for the library for Aperture
Hello,
I have been using Aperture all day and for some reason am now getting this error message when trying to open it again.
Te was an error opening the data base for the library "users/*******/pictures/aperture3triallibrary.aplibrary
Has this happened for anyone else?
Many Thanks
When I hold down ⌘⌥ firmly, at the same time, and with these keys held down double click the Aperture library that I want to repair, I get this panel:
Then, when I select "Repair" Aperture will show a progress bar and the Dock icon will stay highlighted.
When it is finished, the Aperture window will open.
When I select repair, it seems as though it doesn't run. I don't get a dialog box to confirm it's happening and on the dock the little light under the Aperture icon isn't lit, which seems it is'nt open or running.
After you select "Repair", does the panel close and then nothing? Or does the panel not react?
I still don't see fully, what is going on on your mac.
But it is a good sign, that you can create a new library. That suggests, that Aperture is running correctly on your mac, and "only" your old library has a problem. Try to test the new library - import a few images and try to adjust them.
Once you are convinced, that the new library is working well, you have three options.
Try "Rebuild" instead of "Repair".
Or try to import your old library into the new library (Aperture's main menu bar > File >Import > Library) - that is another approach to rebuilsd the library.
Or restore from backup. To restore from Time Machine, open a Finder Window showing your Aperture library, and then enter Time Machine. Go back in time to the most recent date that has a working Aperture library and select "Restore". If you have enough space on your disk, restore to a different folder and don't overwrite your current library.
Regards
Léonie
Similar Messages
-
I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library. Then a "quit" button.
What is going on and how can I open my aperture. I have pictures that need worked for clients. Help!Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
If that doesn;t resolve the problem when you post back describe your hardware and software setup.
good luck -
Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin. -
When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
JimHello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie -
There was an error opening the database for the library "~/Pictures/Apertur
There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
What's up with this? Aperture showed this error a couple times before quitting when I tried to open it.I got the same error. Normally I would perform a Repair Database command by holding down Option-Command while launching Aperture, but that just gave me the same error without any options to repair the database.
Instead, I had to follow these instructions in the Aperture user manual. The key is to locate the Aperture library file on your hard drive and then hold Option-Command while double-clicking the Aperture library file.
Choose the REPAIR DATABASE option.
-- excerpt from user manual --
To repair or rebuild your Aperture library
Close Aperture, if it’s open.
Locate the Aperture library you want to fix, then hold down the Command and Option keys while double-clicking the Aperture library.
The Aperture Library First Aid dialog appears.
In the Aperture Library First Aid dialog, do one of the following:
To repair the permissions of the files within your Aperture library: Select Repairing Permissions.
This option should be used when Aperture can’t access some of the image files within the database or Aperture is unable to open the library itself. The Repairing Permissions option reviews each file in your Aperture library and sets the read and write access of each file where appropriate, allowing Aperture to access the files again.
Note: This option does not relocate referenced images whose master image files are offline. For more information about reconnecting offline images, see Reconnecting Missing or Offline Referenced Images.
To repair your Aperture library file: Select Repair Database.
This is the first option you should use if you believe there is something wrong with the Aperture library other than image file access issues.
To rebuild your database from scratch: Click Rebuild Database.
This option should be used as your last measure as it can be time-consuming for large image libraries. If you have tried repairing your database, and the issues you are encountering with your Aperture library still persist, you should use the Rebuild Database option. Aperture examines the library’s entire database and rebuilds each component until it reconstitutes your original Aperture library.
Depending on your selection, click Repair or Rebuild.
Aperture either fixes file permissions within the library or repairs or rebuilds the library, and then opens the application workspace. -
When I try to open aperture (which has worked great for months), I get this response:
There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Please help!! Thank you!! =)Sonny3300, your signature says "Aperture 2" - is that correct? Then you need this trouble shooting guide:
Aperture 2: Troubleshooting Basics: http://support.apple.com/kb/HT2945
What is your Operating system version and where is your library located? Have imported new images recently or changed the location of your library?
Regards
Léonie -
When i try to open aperture, i get a box popup that says;
Warning-There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Can anyone help? I cannot accesss aperture. this is the 1st time this has ever happened...
thanks,Try running a repair on the library. Hold the command and option keys down while starting Aperture, this will open the repair window. Select Repair Library.
See Aperture 3: Troubleshooting Basics
If you still have problems post back -
There was an error opening the database for the library “/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary”.
What do I do now. I cant access the photos on the drive. The only option is Quit? what ??????????
Please help ready to throw computer and drive out the window. I have a deadline of next Tuesdaythe 11th.Start Aperture while holding down the option and command keys. You'll get a Photo Library First Aid dialog as below.
Try Repair Database first. If that doesn't work, then redo the startup with option-command and try Rebuild Database. These repair processes can take a long time with a larger library.
If all that fails, you can try creating a new library from scratch and then try importing the old library into the new. This sometimes can fix problems that can't be repaired the First Aid way.
Also make sure the drive where the Aperture library is located is working properly. You can check it with Disk Utility app. -
I have updated my Aperture 3 and when I try to open it I get an error message; error opening the databese for the library"Pictures/Aperture Library.aplibrary". I have tried the Command/Option keys to get past the error but I can't. Does anyone have a recommendation or document to help me get Aperture working again? Thanks.
I have tried the Command/Option keys to get past the error but I can't.
Did you try the "Command/Option keys" when you were launching Aperture? Then try again, by holding down "Command/Option" while double clicking your library in the Pictures folder.
If this does not succeed, have a look at the permissions of your library package in the "Get Info" panel: select the Aperture Library package in the Finder and press cmd-I. If you see that you do not have read/write permissions, correct that and select the option to apply these permissions to the enclosed items.
If you still cannot open the library, launch Aperture with the "options-key" hold down and select to create a new Aperture Library from the pop-up menu. Hopefully this will enable you to launch Aperture again. Then try to import your old library into the new, empty library by using the "File -> Import -> Library/Project" menu command. If your library is large, this could take a long time, however.
Post back, if you this does not solve the problem.
Regards
Léonie -
I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?
Hi,
not sure what the problem might be, but you can try the following:
While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
Good luck!
Corrado -
"There was an error opening the database for the library "~/Pictures/Apert"
Hey everyone,
There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
⌥-click Aperture (not the library)
You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
Close Aperture
⌃-click both the old and new libraries and "Show Package Contents."
Open the folder "Database" in both libraries.
Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
Close both folders.
⌘⌥-click the old library.
NOW, I got the Aperture Library First Aid dialog.
Rebuild the library (3rd option)
Wait a while.
Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.Hey All,
To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
"There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
Does anyone know away to get it to work again and have the edits still there?
I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
Does apple have a support number I can call? Any help would be greatly appreciated!! -
I now can't even open Aperture 3.2.2. I get the error msg. "There was an error opening the database for the library “~/Desktop/Aperture 3 Library.aplibrary”.
Have you tried the Library First Aid?
Locate your Aperture Library on the Desktop and hold down the option and command keys -and while holding down the keys double click the library file. The "first aid" wil give you options to repair the permissions, repair the library, or to rebuild the library. Try the options in this order and post back, if tis should not fix the problem.
Regards
Léonie -
When I try to open Aperture 3- I get this message : There was an error opening the database for the library...(name of library).
The last time I tried to open the library I got a window requesting a conflict in library data. It ask if I wanted to resolve it. So I pushed the repair button.
Thanks in advance for your help !!William,
Thanks so much for your reply.
When first hooked up I reformatted the external as Mac OS Extended Journaled within Disk Utility.
I am not sure what HFS+ means. Can you help me there ?
Tom Rodgers -
I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks
Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics -
Error message "There was an error opening the database for the library"
I am getting the following error when I try to open my Aperture today: "There was an error opening the database for the library “/Users/xyz/Pictures/Aperture Trial Library.aplibrary”".
I tried doing Option-Cmd while double clicking Aperture, but I can't get to the restore screen. I also tried to use Time Machine to restore the library and am still getting the error. Is there a different way to get to the restore screen??Someone posted in another thread that they needed to create a new library and import the old one in.
Maybe you are looking for
-
Signal booster when using the Apple leather casing
after i purchased my 6 plus, one thing i noticed was the weak cellular signal reception BUT i was surprised that the signal was stabilized and boosted by the Apple leather casing. I thought it was a software issue. Now i hate to think that it could b
-
Can we use two pricing procedure for same sales area
can we assign two pricing procedure to the same sales area please suggest
-
Associated Items Field in SharePoint 2013
Hi , I have two custom lists : - Products List which contains the list of products ( child list) - Products Category List which contains the list of categories ( parent list) - A lookup column in the Products List which point to
-
Accessing a WMS created with Geoserver that requires authentication
Can I create a WMS theme in Map Viewer that is served from Geoserver? This Geoserver WMS requires authentication. I can access it in ArcGIS but I don't know how to access it in Map Viewer.
-
Retention periods same for the deletion and for archiving then deletion
Hi, Is Retention periods same for the deletion and for archiving then deletion. Can we delete canceled messages directly in XI wihtout archiving them ? I want only deltion of messages from XI. Regards Sree