Error opening database in aperture

Made a back up of aperture lib using time machine and now the lib will not open with error:
"There was an error opening the database for the library "~/Destop/Aperture Library.aplibrary".
I restored the file and still have the problem. Ran disk util and other checks of the machine and no joy!
Tried command-option without luck. Any other suggestions?

"Made a back up of aperture lib using time machine". What does that mean exactly? Time Machine should not be affecting your library unless you are trying to recover something from a time machine backup. But that is the opposite of what I think you are saying.
One thing to try is create a new fresh library and then try importing from your old library into the new library (File->Import->Library/Project...). If your library is large, this could take a long time.

Similar Messages

There was an error opening database for the library....

my latpop had a kernel panic wihile i was using aperture to impor pictures "that yes i have deleated off the memory card," shut down and restarted. upon restarting i was presented with this error...

there was an error opening database for the library....
what is ....? Is the path to your main Aperture library printed there, or is Aperture trying to open a different location? If it is a different location, launch Aperture on your correct library, by double clicking the library.
If it is indeed trying to open the correct library package, try if repairing and rebuilding the library with the "first aid tools" will help, see this manual page on how to do this:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
If the problem persists, when trying to repair, check if there is a crash report and post the first 60 lines.
Regards
Léonie

Aperture error opening database for library

I was working in Aperture--deleting photos--when it crashed. My Mac Book Pro rebooted but in trying to open Aperture after it rebooted, I got this message:
"There was an error opening the database for the library “/Users/rick/Pictures/Aperture Library.aplibrary”. My only option on the pop-up was to quit.
I found a suggestion here online to find the Aperture library, hold Command-Option and double click the library which supposedly would bring up a repair menu. It didn't. I got the same message as i did on trying to open Aperure quoted above, and again the only option was to quit Now I can't even open Aperture.
Any ideas how to get my library back? Thanks.

Here is the Etresoft report. The only software I can recall recently installing is Dashlane. And I did have the local Apple store recently install new memory (from 4 GB to 8) but other than that I don't recall other changes. I believe Aperture is the most current version. To check, I'll have to log on to the other account because that is now the only way I can get Aperture to open. Should I do that?
Hardware Information:
          MacBook Pro (13-inch, Mid 2009)
          MacBook Pro - model: MacBookPro5,5
          1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
          8 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
          OS X 10.8.4 (12E55) - Uptime: 0 days 0:45:0
Disk Information:
          FUJITSU MJA2500BH FFS G1 disk0 : (500.11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (19.05 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.fitbit.galileod.plist
          [loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [loaded] com.hp.devicemonitor.plist
          [loaded] com.hp.messagecenter.launcher.plist
          [not loaded] com.sony.ReaderDesktop.RunReaderDesktop.plist
          [not loaded] com.sony.ReaderLibrary.RunReaderLibrary.plist
User Launch Agents:
          [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
          [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist
User Login Items:
          iTunesHelper
          Reader Library Launcher
          Canon IJ Network Scanner Selector2
          readerAppHelper
          Dropbox
          Fitbit Connect Menubar Helper
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
Internet Plug-ins:
          CANONiMAGEGATEWAYDL.plugin
          EPPEX Plugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          GarminGpsControl.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin.plugin
          ContentManager.plugin
          Dashlane.plugin
          RocketEngine.plugin
          UploadManager.plugin
Bad Fonts:
          None
Top Processes by CPU:
               2%          WindowServer
               2%          WebProcess
               1%          EtreCheck
               1%          HP Device Monitor
               1%          Safari
               1%          Fitbit Connect Menubar Helper
               0%          fontd
               0%          WebKitPluginHost
               0%          DashlaneAgent
               0%          Console
Top Processes by Memory:
          546 MB             WebProcess
          139 MB             WebKitPluginHost
          90 MB              Safari
          82 MB              Pages
          74 MB              Dropbox
          66 MB              mds
          57 MB              WindowServer
          49 MB              Finder
          49 MB              DashlaneAgent
          49 MB              Dashlane
Virtual Memory Statistics
          5.10 GB            Free RAM
          1.73 GB            Active RAM
          281 MB             Inactive RAM
          661 MB             Wired RAM
          355 MB             Page-ins
          0 B                Page-outs

Error Opening Database

Hi I have just repaired my Aperture 3.1 Database hoping that it would help with some difficulties I have with the software.
Now it is completed when I try to open Aperture I get the message "There was an error opening the database for the library “/Volumes/xxxxxx” and it won't let me open the program at all.
Any suggestions? (I don't really want to delete my preferences as it took me so long to get them streamlined!)

Have you give the launch options of Repair or Rebuild a try?
Make a backup of your library, then launch the app with Command and Option keys held down.
Choose a Repair and see if that helps getting past any error. Then rebuild if necessary.

Aperture 3.1 "Error opening database for the library"

Hey,
I've just returned from a two week gig, thousands of client photos to go through quickly and get out to them. Did a software update, did the Aperture 3.1 library. It asked me to update my library, I hit ok. Once it was done, I got this error:
My only choice is to quit. Any ideas on how to correct this quickly? Thanks a million!

Alright, so I did this, but when I hold down the option and command keys (both from the dock and from finder), I don't get first aid, but the upgrade window. I deleted my aperture library, and restored it using time machine to when it was used for the previous version, and it worked a couple of times, but now it wants me to update the library AGAIN. The only thing I can do is hold down option to select libraries, but that's kinda useless since there's only one I want.
Any ideas?

Error opening database, Plz help!

Dear Oracle Gurus,
I have been getting this error message today, and I dont know what steps to be taken.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16068: redo log file activation identifier mismatch
ORA-00312: online log 1 thread 1: 'D:\ORACLE\ORADATA\ORCL\REDO01.LOG'
I am not able to log in with any of the users except a sysdba like sys.
In other words, I am only able to log into the database thru sys but cannot perform any operations on tables or objects.
I am running Oracle 9i R2
Please help how to get rid of this problem.

ORA-00312 online log string thread string: 'string'
Cause: This message reports the file name for details of another message.
Action: Other messages will accompany this message. See the associated messages for the appropriate action to take.
ORA-00313 open failed for members of log group string of thread string
Cause: The online log cannot be opened. The file may not be in the expected location.
Action: Specify the correct redo log file or make the log available, if necessary. Also, see the accompanying messages.
ORA-00314 log string of thread string, expected sequence# string doesn't match string
Cause: The online log is corrupted or is an old version.
Action: Find and install the correct version of the log or reset the logs. Refer to the Oracle9i Database Administrator's Guide for recovery procedures.

Newbie ? - Error Opening Database After Recovery

Hi All-
I'm new to Oracle and am using 9i - I'm working on cloning our Production db for a Test db.
I shutdown the Production db and copied all the files from that db into my Test db - I then started my Test db and recovered it. I am now trying to OPEN it, but am getting an error. I am hoping that someone out there with a little more experience and knowledge can help me with this issue.
Here is what I've done and the error that I'm getting:
SQL> @/ubc/test/clone.sql
ORACLE instance started.
Total System Global Area 1502242576 bytes
Fixed Size 743184 bytes
Variable Size 452984832 bytes
Database Buffers 1048207360 bytes
Redo Buffers 307200 bytes
Control file created.
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 1411222426 generated at 05/01/2007 18:31:02 needed for thread
1
ORA-00289: suggestion : /ubc/oracle/OraHome1/dbs/arch1_61111.dbf
ORA-00280: change 1411222426 for thread 1 is in sequence #61111
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/ubc/test/redo/redo03.log
Log applied.
Media recovery complete.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
SQL>
Then, when I go to my '.trc' file to see the error, the following is in there:
/ubc/oracle/dprtest/dumps/udump/dprtest_ora_1179688.trc
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
ORACLE_HOME = /ubc/oracle/OraHome1
System name:     AIX
Node name:     p650
Release:     2
Version:     5
Machine:     0001875A4C00
Instance name: dprtest
Redo thread mounted by this instance: 1
Oracle process number: 12
Unix process pid: 1179688, image: oracle@p650 (TNS V1-V3)
*** SESSION ID:(9.1) 2007-05-02 08:31:05.436
Start recovery at thread 1 ckpt scn 1411222426 logseq 61111 block 188745
*** 2007-05-02 08:31:20.370
Media Recovery Log /ubc/test/redo/redo03.log
File 1 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 2 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 3 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 4 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 5 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 6 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 7 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 8 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 9 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 10 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 11 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 12 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 13 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 14 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 15 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 16 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 17 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 18 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
File 19 (stop scn 1411222427) completed recovery at checkpoint scn 1411222427
*** 2007-05-02 08:31:31.238
ORA-30012: undo tablespace 'UNDOTBS01' does not exist or of wrong type
Any input or thoughts on how to address this issue would be greatly appreciated! Thanks in advance for your time and assistance!!
-JG
Message was edited by:
J.G.

The following is in my init file:
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_retention=10800
undo_tablespace=UNDOTBS01
And this is my startup script ("clone.sql"):
STARTUP NOMOUNT
CREATE CONTROLFILE SET DATABASE "DPRTEST" RESETLOGS NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 5
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 1
MAXLOGHISTORY 1588
LOGFILE
GROUP 1 '/ubc/test/redo/redo01.log' SIZE 500M,
GROUP 2 '/ubc/test/redo/redo02.log' SIZE 500M,
GROUP 3 '/ubc/test/redo/redo03.log' SIZE 500M
-- STANDBY LOGFILE
DATAFILE
'/ubc/test/other_sysadmin/xdb01.dbf',
'/ubc/test/other_sysadmin/users01.dbf',
'/ubc/test/other_sysadmin/undotbs01.dbf',
'/ubc/test/other_sysadmin/tools01.dbf',
'/ubc/test/other_sysadmin/system01.dbf',
'/ubc/test/other_sysadmin/odm01.dbf',
'/ubc/test/other_sysadmin/example01.dbf',
'/ubc/test/other_sysadmin/drsys01.dbf',
'/ubc/test/other_sysadmin/cwmlite01.dbf',
'/ubc/test/data/OLTP.dbf',
'/ubc/test/data/STAGING.DBF',
'/ubc/test/indexes/indx01.dbf',
'/ubc/test/indexes/STAGINGINDEX.DBF',
'/ubc/test/indexes/OLTPINDEX.DBF',
'/ubc/test/other_notused/STATSPACK.DBF',
'/ubc/test/other_notused/SPOTLIGHT.DBF',
'/ubc/test/other_notused/DATACAPTUREINDEX.DBF',
'/ubc/test/other_notused/DATACAPTURE.DBF',
'/ubc/test/other_notused/ARCHIVE.DBF'
CHARACTER SET WE8ISO8859P1
HTH
-JG

Error opening database Windows service OracleServiceEMPREP

I just installed Oracle Grid Control 10.2.0.1 then upgraded it to 10.2.05 on Windows 2003 server.
I could open the service OracleServiceEMPREP at 10.2.0.1 but not after I upgraded to 10.2.0.5
This is the error I get.
Problem Description: Could not start the OracleServiceEMPREP service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
Any advice?

<<Did you delete the db software by using universal uninstaller or just deleting a directory?>>
I deinstalled the software through the uninstaller.
Then I removed the Oracle directories.
Then I reinstalled Oracle again.
I first installed 10.2.0.1 and the service worked.
I then upgraded to 10.2.0.5 and the service now doesn't work.
<<Still nothing in the alert log?>>
Nothing
<<What do the last lines in <oracle_home>\database\oradim.log say?>>
Tue Oct 05 08:59:34 2010
D:\OracleHomes\db10g\bin\oradim.exe -shutdown -sid emrep -usrpwd * -shutmode immediate -log oradim.log
Tue Oct 05 09:00:08 2010
D:\OracleHomes\db10g\bin\oradim.exe -startup -sid emrep -usrpwd * -log oradim.log -nocheck 0
Tue Oct 05 10:00:10 2010
D:\OracleHomes\db10g\bin\oradim.exe -shutdown -sid emrep -usrpwd * -shutmode immediate -log oradim.log
<<Do you still have all your datafiles and control file(s)?>>
Yes
<<Do not ever edit+save the spfile, it will become corrupt.>>
I do no do this.
<<Can you copy/past (using wordpad) the <oracle_home>\database\spfileEMREP.ora?>> ╕ ─ ¢+ *.__db_cache_size=381681664
emrep.__db_cache_size=381681664
*.__java_pool_size=4194304
emrep.__java_pool_size=4194304
*.__large_pool_size=4194304
emrep.__large_pool_size=4194304
*.__shared_pool_size=142606336
emrep.__shared_pool_size=142606336
*._awr_restrict_mode=TRUE
*.aq_tm_processes=1
*.background_dump_dest='D:\OracleHomes\db10g\admin\emrep\bdump'
*.compatible='10.1.0.3.0'
*.control_files='D:\OracleHomes\oradata\emrep\CONTROL01.CTL','D:\OracleHomes\oradata\emrep\CONTROL02.CTL','D:\OracleHomes\oradata\emrep\CONTROL03.CTL'
*.core_dump_dest='D:\OracleHomes\db10g\admin\emrep\cdump'
*.db_block_size=8192
*.db_domain='sdcclinical.local'
*.db_file_multiblock_read_count=16
*.db_name='emrep'
*.db_recovery_file_dest='D:\OracleHomes\db10g\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.fast_start_mttr_target=300
*.job_queue_processes=10
*.nls_length_semantics='byte'
*.open_cursors=300
*.pga_aggregate_target=268435456
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.session_cached_cursors=200
*.sga_target=536870912
*.sort_area_size=1048576
*.timed_statistics=TRUE
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='D:\OracleHomes\db10g\admin\emrep\udump'

Error Open database!!!

My database is not archivelog mode.
We need to restore it but we don't have the BACKUP, only system and data datafiles.
When we open the database, ther is the error
ora 01113 AND ORA 01110 and we need to recovery the database and get functional.
Error: File need to recover 'n:\database\res1prod.ora'
Is it possible to restart the database ? If yes how can i do ?

Well, I really don't see how can you recover a database without a backup !
One thing could try though
STARTUP MOUNT the database,
then issue ALTER DATABASE RECOVER.
When prompted for a log file name, respond with the name of your online redo log file, one by one.
Hopefully, the information needed for recovery is in the online redo log files

Error opening container with DB_READ_UNCOMMITTED

I am running into an exception condition when I try re-creating the Isolation sample found at [http://www.oracle.com/technology/documentation/berkeley-db/xml/gsg_xml_txn/cxx/isolation.html#dirtyreads] . Everything works fine with all of the settings in that example except when I try to pass the DB_READ_UNCOMMITTED flag to XmlManager.openContainer(); when I try to pass that in I get the following exception:
XmlException: DbSequence::open: Invalid argument
ConfigurationDatabase.cpp line 65
the numeric value of the flags parameter at this stage is 134217857, if that helps...
my sample code:
// BdbXmlWin32Console.cpp : Defines the entry point for the console application.
#include "DbXml.hpp"
#include
#include
#include "stdafx.h"
using namespace DbXml;
int _tmain(int argc, _TCHAR* argv[])
u_int32_t env_flags = DB_CREATE | // If the environment does not
// exist, create it.
DB_INIT_LOCK | // Initialize locking
DB_INIT_LOG | // Initialize logging
DB_INIT_MPOOL | // Initialize the cache
DB_THREAD | // Free-thread env handle
DB_INIT_TXN; // Initialize transactions
std::string envHome("C:\\dev\\db\\samples\\ReadUncommitted");
DbEnv myEnv(0);
XmlManager *myManager = NULL;
try {
myEnv.open(envHome.c_str(), env_flags, 0);
myManager = new XmlManager(&myEnv, 0);
u_int32_t containerFlags =
DB_CREATE | // If the container does not exist,
// create it.
DBXML_TRANSACTIONAL | // Enable transactions.
DB_READ_UNCOMMITTED; // Enable uncommitted reads.
std::string containerName = "myContainer.dbxml";
XmlContainer myContainer =
myManager->openContainer(containerName, containerFlags);
myContainer.close();
} catch(DbException &e) {
std::cerr << "Error opening database environment: "
<< envHome << std::endl;
std::cerr << e.what() << std::endl;
return (EXIT_FAILURE);
} catch(std::exception &e) {
std::cerr << "Error opening database environment: "
<< envHome
<< " or opening XmlManager or XmlContainer." << std::endl;
std::cerr << e.what() << std::endl;
return (EXIT_FAILURE);
// File to open
std::string file1 = "doc1.xml";
// Transaction handle
// Enable uncommitted reads for this transaction.
XmlTransaction txn = myManager->createTransaction(DB_READ_UNCOMMITTED);
// From here, you perform your container reads and writes as normal,
// committing and aborting the transactions as is necessary, as well as
// testing for deadlock exceptions as normal (omitted for brevity).
}Thanks!
Edited by: Lucas Vogel on Jan 11, 2009 7:45 PM

Lucas,
This appears to be a bug. That flag is not legal for one of the internal databases in the system and is not properly being cleared on open. That said, there are few cases where you'd really want to use that flag in BDB XML. What is your intent? Allowing readers to see not-yet-committed data is dangerous. Using MVCC is a better route for concurrent applications.
Regards,
George

Master unable to open database

I am trying to run a replicated Berkeley DB instance and while the environment is created successfully and the master is elected, when the master attempts to open the database it returns an ENOENT. According the the documentation (and replication guide) this type of error occurs upon open when a replica attempts to open the database when it has not been created yet. While this makes sense for the replica, it doesn't seem like the master should ever return this error, particularly since the master has the DB_CREATE flag set. It is unclear to my why it is that the master replica is unable to open the database, does anyone know why this is occurring?
Here is the relevant code:
try
u_int32_t envFlags;
// First initialize the database enviroment information
envFlags = DB_CREATE | // If the environment does not exist, create it.
DB_RECOVER | // Run normal recovery
DB_INIT_LOCK | // Initialize locking
DB_INIT_LOG | // Initialize logging
DB_INIT_MPOOL | // Initialize the cache
DB_INIT_TXN | // Initialize transactions
DB_INIT_REP | // Initialize replication
DB_THREAD; // free-threaded (thread-safe)
env_->set_errfile(stderr);
//Sets verbose output to make replication easier to debug
env_->set_verbose(DB_VERB_REPLICATION, 1);
//Configure the local server
env_->repmgr_set_local_site(local_.ip.c_str(), local_.port, 0);
env_->repmgr_add_remote_site(replica.ip.c_str(), replica.port, NULL, 0);
env_->rep_set_nsites(2);
//If a role is specified then set the databases priority accordingly.
switch ( r )
case MASTER:
env_->rep_set_priority(500);
cerr << "Master Priority" << endl;
break;
case SLAVE:
env_->rep_set_priority(50);
cerr << "Slave Priority" << endl;
break;
case UNKNOWN:
default:
env_->rep_set_priority(5);
cerr << "Unkown Priority" << endl;
break;
env_->set_app_private(&status);
env_->set_event_notify(callback_handler);
env_->repmgr_set_ack_policy(DB_REPMGR_ACKS_ONE);
env_->set_timeout(1000000, DB_SET_TXN_TIMEOUT);
env_->set_tx_max(10000);
env_->set_lk_detect(DB_LOCK_MINWRITE);
env_->open(path.c_str(), envFlags, 0);
env_->repmgr_start(3, DB_REP_ELECTION);
sleep(5);
db_ = new Db(env_, 0);
u_int32_t dbFlags = 0;
bool isOpen = false;
while(!isOpen)
dbFlags = DB_AUTO_COMMIT;
if( status.role == MASTER )
cout << "Setting DB_CREATE Flag " << endl;
dbFlags |= DB_CREATE;
if( db_ == NULL )
db_ = new Db(env_, 0);
db_->set_error_stream(&std::cerr);
cerr << "Attempting to open db" << endl;
try
db_->open(NULL, dbFileName_.c_str(), NULL, DB_BTREE, dbFlags, 0);
cerr << "DB Opened successfully" << endl;
isOpen = true;
break;
catch(DbException dbe)
/* It is expected that this condition will be triggered
* when client sites start up.
* It can take a while for the master site to be found
* and synced, and no DB will be available until then.
if (dbe.get_errno() == ENOENT) {
cerr << status.id << " DB not available yet, retrying." << endl;
db_->close(0);
db_ = NULL;
} else {
env_->err(dbe.get_errno(), "DB->open");
throw dbe;
sleep(5);
// DbException is not a subclass of std::exception, so we
// need to catch them both.
catch(DbException &e)
std::cerr << "Error opening database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
catch(std::exception &e)
std::cerr << "Error opening database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
I am running this code with verbose replication output on a local machine. I start a single client on port 9090 and add a replica on port 9091 (the replica does not start since the first client does not return). I have tried cleaning out the folder where is db is written to and it makes no difference. I have provided some /* comments */ to augment what is being output.
REP_UNDEF: EID 0 is assigned for site localhost:9091
9090 Master Priority
REP_UNDEF: Read in gen 9
REP_UNDEF: Read in egen 9
REP_UNDEF: rep_start: Found old version log 14
CLIENT: dbs/ rep_send_message: msgv = 5 logv 14 gen = 9 eid -1, type newclient, LSN [0][0] nogroup nobuf
event: DB_EVENT_REP_CLIENT, I am now a replication client
CLIENT: starting election thread
CLIENT: elect thread to do: 0
CLIENT: repmgr elect: opcode 0, finished 0, master -2
CLIENT: init connection to site localhost:9091 with result 115
connecting to site localhost:9091: Connection refused
Done sleeping, trying to open dbs
/* Environment has been opened, now the client will try to open the database */
Attempting to open db
DB not available yet, retrying.
/* Open fails since it is a client and there is no master to create the database yet */
CLIENT: elect thread to do: 1
DB_ENV->rep_elect:WARNING: nvotes (1) is sub-majority with nsites (2)
DB_ENV->rep_elect:WARNING: nvotes (1) is sub-majority with nsites (2)
CLIENT: Start election nsites 2, ack 1, priority 500
Attempting to open db
CLIENT: Tallying VOTE1[0] (2147483647, 9)
CLIENT: Beginning an election
CLIENT: dbs/ rep_send_message: msgv = 5 logv 14 gen = 9 eid -1, type vote1, LSN [1][5174] nogroup nobuf
DB not available yet, retrying.
CLIENT: Tallying VOTE2[0] (2147483647, 9)
CLIENT: Counted my vote 1
CLIENT: Skipping phase2 wait: already got 1 votes
CLIENT: Got enough votes to win; election done; winner is 2147483647, gen 9
CLIENT: Election finished in 2.098189000 sec
CLIENT: Election done; egen 10
event: DB_EVENT_REP_ELECTED
CLIENT: Ended election with 0, sites 0, egen 10, flags 0x200a01
CLIENT: Election done; egen 10
CLIENT: New master gen 10, egen 11
CLIENT: Establishing group as master.
MASTER: rep_start: Old log version was 14
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type newmaster, LSN [1][5174] nobuf
MASTER: restore_prep: No prepares. Skip.
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5174]
event: DB_EVENT_REP_MASTER
event: DB_EVENT_REP_MASTER
MASTER: election thread is exiting
/* Client gets elected to be the master, and thus can set the db create flag */
Setting DB_CREATE Flag
Attempting to open db
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5210] flush
DB not available yet, retrying.
/* Master cannot open the database event though the db create flag is set, this is the issue */
Setting DB_CREATE Flag
Attempting to open db
MASTER: dbs/ rep_send_message: msgv = 5 logv 14 gen = 10 eid -1, type log, LSN [1][5272] flush
DB not available yet, retrying.
/* repeated indefinitely */
Can anyone help? Thank you.

dbFileName is "./dbs/test.db" and the dbs folder exists. I tried putting 777 permissions on the folder as well as using " dbs/test.db" to no avail.
I removed the database and all logs and ran it again for the same time as before and below is the db_printlog output:
[1][28]__txn_recycle: rec: 14 txnp 0 prevlsn [0][0]
     min: 2147483648
     max: 4294967295
[1][64]__fop_create: rec: 143 txnp 80000001 prevlsn [0][0]
     name: ./dbs/80000000.f1e7a7fc0
     appname: 1
     mode: 660
[1][128]__fop_create: rec: 143 txnp 80000003 prevlsn [0][0]
     name: ./dbs/80000002.b856343a0
     appname: 1
     mode: 660
[1][192]__fop_create: rec: 143 txnp 80000005 prevlsn [0][0]
     name: ./dbs/80000004.f447bb460
     appname: 1
     mode: 660
[1][256]__fop_create: rec: 143 txnp 80000007 prevlsn [0][0]
     name: ./dbs/80000006.d66a33830
     appname: 1
     mode: 660
[1][320]__fop_create: rec: 143 txnp 80000009 prevlsn [0][0]
     name: ./dbs/80000008.d59895bb0
     appname: 1
     mode: 660

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

I downloaded Aperture and now I'm getting a "There was an error opening the database for Library " and I can't do anything else. How can I fix it so I am once again able to run Aperture?

I Downloaded Aperture from the Apple Website then proceeded to download all my picture's frp, IPhoto. The very next time I opened Aperture an error poped up stating, There was an error opening the database for Library "blank". I can't do anything with the program but hit the cancel buttom which closes the program. How do I fix it?

Is "blank" the name of your Aperture Library? If not, then Aperture is pointing to the wrong Library. Hold down the option (⌥) key while you launch Aperture by clicking it in the Applications Folder. Then select the correct library and press the "choose" button.
If that does not help, try to repair your library:
Locate Aperture library in Finder. Holding down the keys option (⌥) +command (⌘) and double click on Aperture Library to show the First Aid dialogue:
Then try to start Aperture again. If that also should fail, try the other steps in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Good Luck
Léonie

Error opening database in aperture

Similar Messages

Maybe you are looking for