Error Opening File for Writing

I have a laptop running on Windows XP and I was having a really hard time running applications on Face Book. I kept getting a message to "kill pages" or "wait" for the program to respond. Most times it would eventually automatically "kill pages" and I am unable to use those apps. It's not only on Face Book either; some other pages will not run due to this problem. So I visited the Adobe web site and it said my version was out of date and that I needed to download the latest version. I did and now I am getting the error unable to open file for writing. (C:\WINDOWS\system32\Adobe\Shockwave\SwHelper_1166636.exe) I don't know if that matters or not.
I cannot download the latest version; I don't know what other information I can give about the laptop; I am now getting the message "A plug-in (Shockwave) isn't responding". Please help if you can.
Thank you for your time and help,
Frustrated in Alabama

Tami3979 wrote:
(C:\WINDOWS\system32\Adobe\Shockwave\SwHelper_1166636.exe)
That is actually Shockwave Player.
So does this FB app actually require Flash Player or Shockwave Player?
Get Flash Player from http://get.adobe.com/flashplayer/

Similar Messages

Cannot download Flash Player 10 due to - Error opening file for writing: Flash10d.ocx

Hello all,
I am having difficulty installing Flash Player 10. I open it up, and only 10% of the download bar finishes before I get the message:
"Error opening file for writing:
C:\Windows\system32\Macromed\Flash\Flash10d.ocx"
I am running Windows Vista with Internet Explorer, although I'm not 100% sure which version of IE it is and haven't found out how to check. I have McAfee for security, but I have already tried disabling the Firewall with no success.
My computer is new, so there's a chance that it already has Flash Player 10 on it since it belonged to someone else before it came to me, but I don't know how to check that either.
Any suggestions?
Thanks!

Let me clarify:
I have already tried disabling the firewall and running the installer again, but it didn't work.

Error opening file for writing when installing

I cannot install Flash on my Vista X64. I have tried running
the downloadable install and the online install. Any time I try to
run the install I get "error opening file for writing" when trying
to write C:\Windows\SysWOW64\Macromed\Flash\Flash9d.ocx.
I have uninstalled Fash first (it never worked anyway) and I
have rebooted. I even tried rebooting in Safe Mode but no matter
what I try, I cannot remove the existing Flash9d.ocx and installing
will not overwrite the existing file.
Even after uninstalling Flash and rebooting to safe mode,
Windows reports that flash9d.ocx is in use. So why is the file in
use after uninstalling?
Any help is appreciated.
Dale

Well, I finally figured out the problem with mine today. Of
course, I'd still like to know what nefarious purpose might be
involved with the Flash activeX file being loaded in memory even
after uninstall and reboot such that it cannot be removed from my
PC even in Safe Mode.
At least I got Flash working. I discovered that Flash was
disabled in IE.
In IE, go to Tools->Options->Programs and then Manage
Add-Ons. In my case, the ShockWave Flash Object was set to
disabled. I changed it to Enabled and I was able to install and use
Flash properly. Now I am just not sure I want to.
With the questionable practices of using the ActiveX control
even after uninstall, and making the file un-removable, along with
the extremely (in my opinion) dishonest practice of installing
Google Toolbar with Flash, I am hoping that Microsoft's Silverlight
puts Flash out of the market - and I'm no huge fan of Microsoft
either. With the new practices from Adobe, they are, in my opinion,
no better than any other spyware and malware purveyor on the market
- right up there with Napster and the dozens of follow-on products
that tricked users into installing unwanted software.

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

Cannot open file for writing...

I keep getting this error...
Cannot open "filename" file for writing. Please check the output filename and file permissions (if it already exists) and then try again.
Not sure what is going wrong here. I have scoured the web and can't find a solution.
Running CS5 on a Mac.
Any help is appreciated!!

This might indicate a problem in AME CS5, but we'll need more information about the clip--and possibly a copy of it--before we can make that judgment.
If the clip plays on Computer X but not on Computer Y, that could indicate that X has a certain codec that's missing on Y.
What codec is the clip? What's the extension of the filename (which equates roughly to the type of wrapper)?
What are the origins of the clip? (e.g., is it straight off of a camera? or was it encoded by another program?)
Do you have AME 5.0.1 installed on both computers?

IE gives "Error opening file" for Sound while it runs fine on Chrome

Is there something with Adobe and IE compatibility ?
When I run a package in Chrome , my audio and video both work fine
Same package when run in IE , video runs fine but the sound gives "Error opening file"

What type of media file? Can you post a link to the problem page online?
HTML5 audio and video is supported by most browsers if you include the proper file types?
MP3 audio
OGA audio
MP4 video
WebM video
OGV video
Nancy O.

SAP Archive Link (Error in opening file for writing)

I am trying to export a file to a folder in the server using a logical path.
The logical path I am using is MARKETING_FILES. I have changed its physical mapping to 'G:\Segmentation_Exports\<FILENAME>'
I am scheduling the program as a background job. But it gets canceled throwing the following error.
SAP ArchiveLink (file G:\Segmentation_Exports\100AC-$100OFF_201105300730 could not be opened for writing)
The problem occurs only in production. In development and Quality servers the program works fine.
In production, when the mapping is changed back to default i.e., <P=DIR_GLOBAL>/<FILENAME>. the program works fine.
Suggestions to solving the issue??
Edited by: qwerty_m on May 30, 2011 9:55 AM

I would check the obvious things first ......
1) Does the directory "G:\Segmentation_Exports" exist on the Production server?
2) If so, does the SAP user have write access to the directory?
3) If so, was a directory inadvertently created with the same name as the output file?
You can also use transactions SM21 and ST22 for more information about the error.
Regards,
D.

How to avoid opening file for writing each time?

Hi!
I have real time data acquisition from a digitizer (NI PXI 5124, but it is not important for my question). Using several NI SCOPE examples I wrote a simple labview program that does the following things in a while loop: configures the digitizer, fetches data and display it in a waveform graph, calculates FFT and display it in a waveform graph, and while the “Save To TDMS File” button is pressed it writes data to a TDMS file. And it works almost fine and “almost” is because from time to time some data are not written to the file. I suppose that the reason is that I open and close the file each time. How can I open the file only once when the button “Save To TDMS File” becomes active and close it at the end, when the button “Save To TDMS File” becomes inactive? I had some ideas using local or global variables but I didn't’t manage to make them work.
Additionally, how can I make “File Path” control inactive while the “Save To TDMS File” is active?
Thanks!
Attachments:
SimpleDataAcq.vi ‏340 KB

You could save the button's value in a shift register. Then you can see if the value changed. If the value changed to TRUE, open the file and use a property node (Enabled) for the path control to disable it. If the value changed to FALSE, close the file and re-enable the path control. You will need to save the file reference in a shift register as well.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

"Attempt to open locked file for writing, Result Code = -54" when importing

I get this error box when importing audio files into a logic session over my network.
+Attempt to open locked file for writing+
+Result Code = -54+
The finder is capable of copying the files over to the local machine, at which point I can successfully import them into my local logic session, but Logic is incapable of doing the same. Strange and annoying.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Pro Tools 11 Attempt to open locked file for writing (-54)

I am able to download Pro Tools 11 (includes HD) Pro Tools_11_0_2_Mac_80450.dmg to my Mac Mini, running 10.8.5. However, when I run it and start Pro Tools 11, it gives me the error "Attempt to open locked file for writing (-54)".
If someone could help me, I would appreciate it immensely.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Error opening editor for file

When I'm opening files via a SFTP connection the file opens; however, I get a somewhat annoying "Error opening editor for file c:\users\[user]\AppData\Local\Temp\[connection]\[folder]\(SFTP)[file]"
I can't figure out why!
Any ideas?

you should use "<xsl:include href" instead of "<xsl:import href"
Regds
--

Opening existing file for writing

Hey how do I open an existing file for writing. For example I want to just add one more line to a file after it has been closed but I don't have the reference to the FileWriter / BufferedWriter object. So I have to tell the directory maybe but how do I open it and start writing to it at the end.
Thanks.

You just create a new File Object 
File f = new File("c:/foo.txt"); 
Then you can read or write to that file with FileReader or FileWriter 
FileWriter fw = new FileWriter(f); 
fw.write(); 
If you want to append sth. to a file I would recommend RandoAccessFile 
RandomAccesFile raf = new RandomAccesFile(f, "rw") 
Now you can get the length of the file and set the pointer to the end 
raf.seek(raf.length());

Open data -error opening file

Hi all,
When I am writing like this , I am unable to open the file.
data : lw_filename type string.
move p_file to lw_filename.
OPEN DATASET LW_FILENAME FOR OUTPUT IN TEXT MODE MESSAGE
LW_MSG ENCODING DEFAULT.
*---Error opening file
IF SY-SUBRC <> 0.
MESSAGE I998 WITH LW_MSG.
ELSE.
please help me in this.
regards,
Ajay

I think you haven't used the lower case additoin to the parameter for file. This will enable you to put the file name in the lower case.
parameters: p_file type char70 lower case. " << LOWER CASE is required
Regards,
Naimesh Patel

Error opening file/URL reference by alias and Administrative limit exceeded

Hello All,
Problem:
SMTP Error: 4.5.0 error opening file/URL reference by alias
and
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
Here is my configuration:
Windows 2000 server (without Active Directory)
SP4
Iplanet Messaging Server 5.2
Netscape Directory Server 4.16
IPlanet Messaging Server 5.2 Hotfix 1.09 (built Jan 7 2003)
We have a group which we use to flash messages to all the users of the mail server. Till last week it was working fine but now I am not able to send messages to this group <group-name>.
There are around 800 (Eight Hundred) E-mail id the messaging server and the flashed message is supposed to go to all 800 + users.
Note: I have another group of 300 users and I am able to send an E-mail to this group of 300 users.
I am using Dynamic Group for Members list.
The error message I get while trying to send message to this group is
SMTP Error: 4.5.0 error opening file/URL reference by alias.
The corresponding error in mail.log file is
30-Jan-2004 10:55:21.40 41c.7e4.1098 tcp_intranet J 0 <group-name>@domain rfc822; <group-name>@domain domain (localhost [127.0.0.1]) 452 4.5.0 error opening file/URL referenced by alias: <group-name>@domain
Now when I construct and Test the LDAP URL from Console, the error I get is:
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
I have increased the various limits but I still get the same error when I send mail to that group or do a LDAP Test:
The deafult and new limits are:
Sizelimit: Default 2000 New 10000
Timelimit Default 3600 New 3600
Lookthroughlimit Default 5000 New 6000
The corresponding error entry in access log of slapd is:
30/Jan/2004:12:19:26 +051800] conn=34 op=213 RESULT err=11 tag=101 nentries=0 etime=2 notes=U
My search for Administrative limit problem and error opening file/URL error in Sun forum and other groups did get some hits but that did not solve my problem.
I will appreciate any suggestion/comments.
Thanks and Regards,
Maneesh Bisht

Thanks Jay.
My problem has been fixed.
Your suggestion was to increase the lookthrough limit. As you would have noticed in my posting that I had increased this limit to 6000 but that did not solve my problem. Today I increased this limit to 10000. And after that I did not get "administrative limit exceeded" error. Also I do not get "error opening file/URL reference by alias" error while sending E-mail to a particular group of 800+ ids.
Regards,
Maneesh Bisht

JRE Command Line Install - Error Opening File Java3BillDevices.jpg

We are installing JRE using a command line script. We keep getting the following error. Is this a bug with the Installer package? Anyone know how to fix it?
Error opening file C:\Users\USERID\AppData\LocalLow\Sun\Java\jre1.6.0_38\Java3BillDevices.jpg
Error: 2
JRE seems to install and work correctly, but the error is perplexing. We are of course installing with Administrative privileges. There are a bunch of posts on the interwebs about this, but nobody really seems to know how to fix it.
OS: WIN7 64bit
JRE: 1.6.0_38
Install Command:
C:\scripts\Java_JRE_1.6.0_38_32bit_W764\jre-6u38-windows-i586.exe /s INSTALLDIR=\C:\scripts\Java_JRE1.6.0_38_32bit_W764\" IEXPLORER=1 MOZILLA=1 STATIC=1 JAVAUPDATE=0 JU=0 UPDATECHECK=0 AUTOUPDATECHECK=0 /L C:\scripts\LOGS\Java_JRE1.6.0_38_32bit_W764_Install.txt

On 30.12.2013 10:06, contentdevelopment wrote:
>
> Hi Laura,
>
> Thanks for your reply, I used to try this installer setupsp.exe, but it
> prompted the following error:
>
> ---------------------------
> Novell Client Support Pack Install
> ---------------------------
> Error: Unable to locate required Support Pack installation files.
>
> Attempted control INF: C:\491psp5_IR2\NLS\ENGLISH\SETUP2K.INF
> Attempted install INF: C:\491psp5_IR2\NLS\ENGLISH\SETUP2K.INF
> ---------------------------
> OK
> ---------------------------
>
> And there is no install.ini file in the 491psp5_IR2.zip.
Please try the full client install:
https://download.novell.com/Download...d=XBMCanfiNDY~
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Error Opening File for Writing

Similar Messages

Maybe you are looking for