Error opening flash files in chrome

Hi,
When I open a flash file in chrome, I get the following error message.
Do you know how to deal with the cause of the error?
Regards & Thanks
Yasu

Thank you for your reply
Sorry, This URL is a private environment, so i can not be published.
Do you know what the messages mean like "cross domain policy"?
Incidentally,This Flash file refer to external data sources.
My environment is as follows.
OS:Windows XP SP3
chrome
version:16.0.912.77 m
Flash plugin
Flash (2 files) - version: 11,1,102,55
Shockwave Flash 11.1 r102
Regards & Thanks
Yasu

Similar Messages

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Error opening fla file.

Hi,
I am a relative newcomer to the world of Flash, so I apologize if this issue is a bit mindless for the veterans.
I am working with Flash CS6 on a Macbook Pro and recently encountered a problem when trying to open a file. An error message pops up, saying 'there was an error opening the file...'. No further details are available.
Looking at the file information, there is still data there, as the size is about 300MB.
I've tried some amateur sleuthing online for a solution, mostly involving changing the .fla extentsion to .rar and repairing the file that way, but nothing I have tried has resolved the issue.
Am I essentially out of luck, or is there a reliable solution for this kind of problem?
Thanks for any help!
Boots

Wow, thanks for such a quick reply, kglad.
I had actually previously zipped and unzipped the file and ended up with a folder full of stuff that I didn't know what to do with. Again, this is where my amateur understanding comes into play.
In the unzipped folder, there are 'bin', 'library' and 'meta-inf' folders, as well as a 'DOMDocument.xml' file, a 'MobileSettings.xml' file, a 'PublishSettings.xml' file and finally a file called 'mimetype'.
Should I be encouraged by this?
I'm pretty clueless at this point about how I might proceed from here. I see that the 'library' folder contains all the sound files for the project (it's a soundboard), but is there a way to go from this point to recovering the project as it was before this issue came up? Or am I stuck with starting the project all over gain?
Thanks again for the help!

Error opening url 'file: What does it mean?

When I test some of my as3 movies a new window opens and I can test the file. Yet when I test other movies I get an (error opening url 'file message.) What causes that? It seems to me that if a movie plays it should also test in a new window.

It doesn' work. I only got the one file open. The swf file won't open at
all. The fla file won't test. But when I debug the fla file the flash player
debugger opens the movie in a new window and I get this message in the
output window: "Attempting to launch and connect to Player using URL
/Users/schweideltyson/Desktop/Circle.swf"
SWF Users:schweideltyson:Desktop:Circle.swf - 2887 bytes after
decompression
Could it be my flash player is not working properly? I wish I knew.

Error opening url 'file ///undefined'

Hey everyone. I'm new to actionscript and I'm having some issues. Here is my code:
function onFinish(success_boolean, results_obj, xml)
    if (success_boolean)
        play ();
    } // end if
} // End of the function
Stage.align = "MC";
Stage.scaleMode = "noScale";
url = "25904";
_root.cacheKiller = "true";
stop ();
var parsed_obj = {};
var unCash = new Date().getTime();
if (_root.cacheKiller == "true")
    fileToLoad = url + "_main.xml?cacheKiller=" + unCash;
    fileToLoad = url + "_main.xml";
else
    fileToLoad = url + "_main.xml";
} // end else if
gs.dataTransfer.XMLParser.load(fileToLoad, onFinish, parsed_obj);
_root.emp.useHandCursor = 0;
_root.mus = 1;
_root.n = 1;
_root.num = 1;
when I try to test mouvie in Flash I received the following error:
Error opening URL 'file:///O|/W%20E%20B%20%20%20%20D%20E%20%20S%20%20I%20%20G%20%20N/web%20design/25904/sou rces/flash/TRY/25904undefined'
I don't know what the probblem is..
Can anyone help me? pls!!!

Use the trace function to track down what values you are trying to process. The error is telling you it cannot find the file for the path specified, and the path that it is identifying seems to be showing that there is a problem not only with the path (appears to have several blanks spaces) but also the file name.
Try tracing the url value before it gets sent to the loading line, as in... trace(url) and see what it shows.

2950 - %Error opening flash:

Hello,
Trying to copy the booted IOS image to my TFTP server but for some odd reason it’s failing to locate the file, even though you can see it in the flash directory:
SWT001#show flash:
Directory of flash:/
    2 -rwx          45 Mar 01 1993 00:02:09 +00:00 env_vars
    3 -rwx     3699303 Mar 01 1993 00:03:38 +00:00 c2950-i6k2l2q4-mz.121-22.EA6.bin
    5 -rwx        1420 Mar 01 1993 00:07:32 +00:00 startup-conifg
    6 -rwx         616 Mar 01 1993 00:51:16 +00:00 vlan.dat
    7 -rwx        2359 Mar 01 1993 01:01:55 +00:00 config.text
    8 drwx        4416 Oct 03 2009 15:17:27 +00:00 html
362 -rwx        1929 Mar 01 1993 01:01:55 +00:00 private-config.text
7741440 bytes total (2154496 bytes free)
SWT001#copy flash:c2950-i6k212q4-mz.121-22.EA6.bin tftp
Address or name of remote host []? 192.168.0.2
Destination filename [c2950-i6k212q4-mz.121-22.EA6.bin]?
%Error opening flash:c2950-i6k212q4-mz.121-22.EA6.bin (No such file or directory)

Do this first:
config t
tftp flash:c2950-i6k2l2q4-mz.121-22.EA6.bin
end
After this you can copy the file to the TFTP server. No need to save the config.
Don't forget to rate our useful posts.

Error opening jar file

I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
          starts fine except when I try to deploy a session bean that is marked as
          clustered. I get an error about reading a jar file
          (D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
          created when the server started. Every server is getting this error and I
          tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
          ideas?
          Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
          java.util.zip.ZipException: error in opening zip file
          at java.util.zip.ZipFile.open(Native Method)
          at java.util.zip.ZipFile.<init>(ZipFile.java:69)
          at java.util.zip.ZipFile.<init>(ZipFile.java:84)
          at
          weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
          at
          weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
          .java:74)
          at
          weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
          , Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
          jectInputStreamBase.java, Compiled
          Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
          treamBase.java, Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
          tStreamBase.java, Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
          eamBase.java, Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
          treamBase.java, Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
          StreamBase.java, Compiled Code)
          at weblogic.cluster.StateDump.readObject(StateDump.java:59)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
          jectInputStreamBase.java, Compiled
          Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
          treamBase.java, Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
          tStreamBase.java, Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
          eamBase.java, Compiled Code)
          at
          weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
          treamBase.java, Compiled Code)
          at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
          Code)
          Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket receive
          error: java.lang.RuntimeException: I/O error
          opening JAR file from
          file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar


From previous posts I see this is a known bug. Is there a fix yet? btw, how
          did a bug of this magnitude
          get past QA. :(
          Elan Halfin <[email protected]> wrote in message
          news:[email protected]...
          > I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
          > starts fine except when I try to deploy a session bean that is marked as
          > clustered. I get an error about reading a jar file
          > (D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
          > created when the server started. Every server is getting this error and I
          > tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
          > ideas?
          >
          > Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
          > java.util.zip.ZipException: error in opening zip file
          > at java.util.zip.ZipFile.open(Native Method)
          > at java.util.zip.ZipFile.<init>(ZipFile.java:69)
          > at java.util.zip.ZipFile.<init>(ZipFile.java:84)
          > at
          > weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
          > at
          >
          weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
          > .java:74)
          > at
          >
          weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
          > , Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
          > jectInputStreamBase.java, Compiled
          >
          > Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
          > treamBase.java, Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
          > tStreamBase.java, Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
          > eamBase.java, Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
          > treamBase.java, Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
          > StreamBase.java, Compiled Code)
          > at weblogic.cluster.StateDump.readObject(StateDump.java:59)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
          > jectInputStreamBase.java, Compiled
          >
          > Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
          > treamBase.java, Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
          > tStreamBase.java, Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
          > eamBase.java, Compiled Code)
          > at
          >
          weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
          > treamBase.java, Compiled Code)
          > at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
          > Code)
          > Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket
          receive
          > error: java.lang.RuntimeException: I/O error
          >
          > opening JAR file from
          > file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar
          >
          >

Error opening password file

Hi, I'm traying to start up a database in sqlplus on SuSE 8.2 and Ora9.2, I have the next error:
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup pfile=/opt/ora9/admin/pavilion/pfile/initmydb.ora
ORACLE instance started.
Total System Global Area 101781824 bytes
Fixed Size 450880 bytes
Variable Size 83886080 bytes
Database Buffers 16777216 bytes
Redo Buffers 667648 bytes
ORA-01990: error opening password file '/opt/ora9/product/9.2/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
My password file is /opt/ora9/product/9.2/dbs/orapwmydb
How can I use my orapwmydb file?

Hi Marco,
as far as I know, you have to use the REMOTE_LOGIN_PASSWORDFILE = SHARED option in your init...ora file.
In this case you have one password file for one or more databases. It can only have the entries for SYS and INTERAL.
I'm sorry to cannot answer your question of having different password files for different databases %-)
Klaus

Error opening preferences file

When opening a pdf document in Adobe Acrobat 9 Pro, saved either locally or on the network, I receive the message "Error opening preferences file The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder." I've tried saving this file with a different name and I still receive this error. If I choose to open this document with Adobe Reader 9, I have no issues. Why would I be having this issue with Adobe Acrobat 9 Pro?

What release of System Update are you trying to install? What OS are you using ie, win 7, 8, 8.1?
Did you really mean IMPORT failed (not export)?
Are your running the install . exec from a Network drive?
Please look in C:\users\*your id*\appdata\local\temp for the msi install log and post 50 lines of the log around where the error occurred.

[HELP] ORA-01990 Error opening password file '/home/oracle/OraHome1/dbs/ora

Dear All,
I have changed the PWD file on oracle 9.2.04 under linux redhat advance server 2.1. but when i start to open database by issuing dbstart, i get
ORA-01990: Error opening password file '/home/oracle/OraHome1/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2 : no such file or directory
additional information: 3
How to solve the problems?
thanks and regard
ER

Hai all...
I did it all..
but still I got
ORA-01990: Error opening password file '/home/oracle/OraHome1/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2 : no such file or directory
additional information: 3
Help me...
Thanks
regard
ER

Error opening the file:8-Per diems upload

Hi Experts,
I am trying to upload the perdiems for the year 2013. I got the error "Error opening the file:8" while doing so. I tried uploading in both .txt as well .xls. Resulted with the same error. Kindly suggest to overome this.
Regards,
Anil Kumar P.

Hi Anil, I experienced the same issue when uploading the file. I resolved this by removing the " characters contained when pasting in the new values.

Error opening the file message

Trying to import any photo I get message "There was an error opening the file." This is new. What can this be about

Please see if the file is a valid one (try opening the image in any other image editor/browser). What is the extension and source of the image?
~Surendra

Can't open Flash files on Windows XP

I have Flash Player 9 installed. I can view Flash files
online in my browsers (IE and Firefox), but when I try to open a
Flash file on my computer to just play it in Flash Player, it asks
me what I want to use to open the file. I have searched the support
documents and looked online everywhere, but can't seem to find the
problem. Basically, I can't find the actual Flash Player program
file on my machine. I know it's there, otherwise I wouldn't be able
to view Flash files in the browser, but I can't view them on my
local machine.
I have tried setting the program associated with .swf files
in folder options to the following, but none of them work. When
associating .swf files with any of these, it says an update for
Flash is available. I go through the update, reboot because it says
it's required, but when I start back up, it just does the same
thing. I cannot open Flash files (.swf) on my computer, only in the
browser and none of the paths I have tried setting .swf files to
open with are actually the Flash Player application. I need to know
where the Flash Player is on Windows XP.
HELP?!?!?!
The paths I've tried are:
C\WINDOWS\stsyem32\Macromed\Flash\Flash9b.ocx
C:\WINDOWS\system32\Macromed\Flash\FlashUtil9b.exe
C:\i386\Flash.ocx
C:\Program Files\Mozilla
Firefox\plugins\NPSWF32_FlashUtil.exe
None of them will open Flash files on my local computer. I
have searched my machine, and those are the only paths I can find
that have anything to do with the Flash Player. Even though it's an
Adobe product now instead of a Macromedia product, I can't find
anything for Flash in any Adobe directories, just Macromedia
directories.
Does anyone know how to remedy this? Has anyone else had this
same problem? Any help would be
GREATLY
appreciated!!! It seems like I started having this association
problem as soon as Flash was switched from Macromedia to Adobe.
Thanks!

I found the solution. After searching the web for what seemed
like an eternity, I found the following on a Google Groups page:
quote:
1 - How can I make my PC play a flash file on my local hard
drive?
Unless you buy Macromedia Flash (the authoring environment)
you can't play them just straight off, you have to open them with a
browser which has the Flash Player plugin installed. To do this,
either right-click on the .swf and select open with... (internet
explorer) or open IE and then go to file... open.... etc.
Then I realized that I started having the problem about the
time I got my new laptop. I didn't install Flash MX on my new
laptop because I don't really use it anymore, I use Swish, so I
didn't install it because I hate installing programs I don't use.
Anyways, I installed Flash MX on my new laptop and walla, I can
open .swf files on my machine again.
I didn't realize I had to have Flash installed (the program,
not the player) in order to be able to open .swf files on my
machine as opposed to viewing them in a browser. Guess I know now!
I thought I'd post what I found in case anyone else had the
same problem and didn't realize it.
Thanks!

Password file auth - error ORA-01990: error opening password file '/p00/ora

Hi, Im setting up password file auth on our existing database.
Ive run this
orapwd file=orapwdt04.pwd password=secret entries=5
then set this in the .ora file
remote_login_passwordfile=exclusive
But when I restart the dabase im getting this error
ORA-01990: error opening password file '/p00/oraprod/9.2.0/dbs/orapw'
How / where do I tell the database to look for the password file.
Im running on AIX and Oracle 9.2.0.6
thanks for looking.

password filename must be in the format of orapw<sid> and location of the file $ORACLE_HOME/dbs

Error opening flash files in chrome

Similar Messages

Maybe you are looking for