Error opening images in PSE from Camera RAW

After opening RAW images in Camera Raw and clicking 'Open images' I often receive an error "Could not process request due to program error." On a second, third try I am usually able to open the images.
Raw images are from Nikon D5100, Camera RAW version 8.3,
Adobe Photoshop Elements Version: 12.0 (12.0 (20130925.r.43436)) x32
Operating System: Windows 7 64-bit

I think others have reported that the size limits that apply to PSE 5 and 6:
http://kb2.adobe.com/cps/402/kb402760.html
also affected their PSE 7 and 8.  If those limits don't apply, it would be good to know authoritatively.

Similar Messages

  • Using Photoshop CC I cannot save images to folder from Camera Raw as Tif. I get message 'write permission error'. I am using Widows 7 Professional.

    I have just changed to Photoshop CC from CS4 and cannot now save images from Camera Raw. I get message 'write permission error'. I assume there is some permissions setting which did not exist with CS4.
    I cannot progress unless I revert to CS4. What am I failing to do?

    See if the suggestions, here, help, although this was back with CS6-cloud, not CC, so may not apply 100%:
    http://forums.adobe.com/message/4758115
    I'd suggest that rather than deleting the file, you move it out of the folder to somewhere else, in case things get worse and you need to put it back.
    I found this by Googling the error message. 
    If you can't figure it out, you might post in the "Downloading, Installing and Set Up" or "Adobe Creative Cloud" forums  since it seems to be related to the Cloud updates, and not necessarily ACR plug-in functionality, and I've seen India support people actually tackle problems posted there, which rarely happens in the ACR forum, although an ACR engineer may sometimes pop in to answer questions, they'd be less likely to know how to fix deployment issues.

  • 16 bit/14bit nefs opening in P/S from camera raw 5.2 as 8 bit images

    I am downloading 16 bit nefs (D300) from card reader with cs4 bridge. In bridge I can check the meta data and see that they are 16bit but when I open in camera raw 5.2 then do the open file in photoshop form there they open as 8bit files instead of 16bit as I expected. I tryed the convert to dng on the import and get same 8bit results. I am using windows xp pro. Any ideas what I am doing wrong? I have slow dial up here so do not have my work photoshop computer hooked to net for help files from bridge and photoshop. Also have Shewes new real world camera raw and his deal with Martin Eweing preordered from amazon but don't know when they will come.

    >I'm having trouble understanding the jargon though. Are you saying that the sensor data is read more slowly in 14-bit, which reduces the noise floor? and that is is only of any benefit when used at the lowest noise ISO (ie 200)?
    Yeah that is basically the idea. A different read-out path or set of amplifiers is used or it is simply "read slower" which can, in principle, reduce noise. Not something that is inherent to 14 vs 12 bits but more to the way the data is read. If the noise stayed the same and it is in the lower 2 bits of the 12 bits converter, there is no point as the only thing you're doing is more precisely imaging the noise. If however, the noise goes down a little going to the 14-bit readout method, you might get better signal to noise ratios and hence more shadow detail. This is all theory, and if you actually do the test with your camera, you'll see there is no difference in real world photos. The shadows would need to be really deep to see any of this. Basically you need to be boosting exposure by 3 or 4 stops AND applying shadow fill near 100. Not a realistic situation. To see it, you indeed need to be at a situation where the noise floor is significantly low, which means low ISOs on most cameras. At high ISO, there could be a difference because of differences in amplifiers, etc, but in practice that is not the case either on this camera. Other sources of noise drown it out completely.
    >Is there no other benefit to post-processing? I'm not clear where the extra 2 bits go; is it increased resolution over the same dynamic range, or is the dynamic range extended? Is this not also a factor in choosing 14 over 12?
    There could be some benefit if the noise characteristics were significantly different. Lower noise means higher dynamic range and therefore better capability to extract detail from shadow areas. However, from my testing, in practice this does not happen on the D300. Other cameras might well show higher dynamic range and better detail in shadows at 14 bits. You can see some of this by looking at the dynamic Range charts on DxOmark.com where sensors of different cameras are tested. You need to be significantly above 11 to 12 EV for 14 bit capture to make a difference.
    >Sorry if this is a bit off-topic, but you have to grab experts when you find some
    The easiest thing is to test it. In realistic scenarios, I just cannot see any difference. If you contrive a completely weird case, such as underexposing an entire image by 8 stops, or pushing up shadows by as many stops, you can get into the range where it might make a difference. Those are just not real situations though.

  • Fail to open image to photoshop in camera raw

    after i make all the adjustment in camera raw, when I chick "open image" it fails to open in photoshop.any solution?

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Image quality after opening from camera RAW

    Why does the image quality seem to get worse in Elements 11 once the image is opened up after editing from Camera RAW?  The image looks great in the RAW screen, then once opened in Photo editor it seems pixelated, smooth lines look jagged.  Is it something I am doing wrong?

    Try viewing at 25%, 50% or 75%

  • My images are going from from camera raw to totally white in Photoshop CS6, I am using a Mac computer.

    I am using Photoshop CS6 and my images are opening up totally white from camera raw into photoshop.
    I am using a Mac. Just recently switched from PC to raw, and never had this problem.

    Is everything up to date?

  • How to open images in Fill Screen mode from Camera Raw

    I am using Photoshop CS4 for Windows. I created an action that executes Fit on Screen and set the Scripts Event Manager to execute that action on the Open Document event. This works when opening a document from Photoshop.
    Here are my questions:
    1) After opening a raw image from Bridge in Camera Raw, when I then open the image in Photoshop, it does not run the Open Document event action to Fit on Screen. What event do I need to set the action to execute on when opening an image from Camera Raw in Photoshop?
    2) I added Fit on Screen to the action by selecting Insert Menu Item from the Actions menu and then selecting View-Fit on Screen. I cannot find Fill Screen on any pull-down menu (the button found on the Hand tool bar). How can I insert the Fill Screen item (which fills the screen a little more than Fit on Screen?
    3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
    http://www.adobe.com/devnet/photoshop/scripting
    Thanks to anyone who can help me out.

    > 3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
    >
    >
    >
    See "Appendix A: Event ID Codes" in the PSCS4 JavaScript Reference pdf file that
    comes with PSCS4.
    -X

  • I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    You would need to update to PSE 12, or just keep using the DNG converter. Your camera requires ACR 8.4, which isn't compatible with PSE 11. It's also not compatible with PSE 12 if you are running Vista or XP.

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • I lose changes in the details when i open my photos from camera raw 7.0 to photoshop cs5, why?

    I lose changes that I made with the tools in the "Details" section, just right after I open my photos from camera raw 7.0 to photoshop cs5, why?   The changes that I made with the tools in the "Basic" section remain. 

    First, how and why are you using Camera Raw 7.0 with CS5? 
    ACR 7.x requires CS6 to run.
    Even if that's a typo in your post and you are running CS6 instead of CS5, no one should be running ACR 7.0, but ACR 8.4 —or at the very least 7.4.
    Once any given camera model is supported by a version of ACR, it will continue to be supported in all subsequent versions of ACR.  Each update to ACR has unannounced, unheralded bug fixes and improvements.  Running 7.0 at this point is sheer madness.
    Please clarify.
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How to open jpg, tiff files in camera raw from elements 10 organizer

    How to open JPG, TIFF files in camera raw from Elements 10 organizer.

    Thanks for that Damead, I agree with you that Organiser is real pain (there is a total lack of intuitiveness if that is  the correct word).
    For my own work I use 'Lightroom' for around 90% of the time, only going into PSE10 for the 10% difficult bits the Lightroom can't handle.
    I only needed to sort out the JPEG file opening method within PSE10 for some freinds in a small Photo Group that I run in Woodhall Spa, UK. 50% of the 12 members are beginners & a number of them do not have Raw capability on their Camera's, but now they can get their JPEG's into Camera Raw within PSE10 they have the same simple tabular form of adjustment sliders (not as many as in Lightroom of cause) but it gets over the labourious problem of going thru the PSE10's individual tool selection process each and every time since we are trying to get everyone in the Group working with individual Tools rather than the 'Auto' functions. We do this so that they learn what they are doing rather than staying 'dumb&happy' within Auto all the time & they also learn how to get more detailed control for each photo.
    Ref. your comments on file handling/usage, I agree with your comments. Its far and away much more preferable to set up a file structure in 'Finder" (or in 'Explorer' if still using Windows) that you understand so you always know how to find the files. Also, I also never ever use the Camera Auto Load programme but physically 'drag & drop' photo files direct from the 'card' into the file system so I always know thier place (ie: they go into the location I want, not that which the Auto Loader wants).
    As regards your comment about 'Lightroom', I don't have any problems at all since I just imported the whole of my photo file structure into the Lightroom Library Catalouge and then it automatically shows up on the LHS of the screen, still in that format, so you can search it direct within Lightroom and display all of the photo's in variuos arrangements and sizes; everything is as easy to find as it is in 'Finder' plus of cause you have all the 'Tagging' possibilities to use as well. As you add more new files into the 'Finder' structure, all you need to do in Lightroom is reimport, starting 1 level up from the new files and Lightroom will find the new files that need loading (ignoring the older ones already in the Library at that or lower levels) then 1 click and its done.
    Your comments about getting others to follow a set file structure is very pertinant and also applies to evrything else that one ever does apart from just photo work; the times I have had to help others find info/files etc on their PC's because they don' know the location of anything is too many to contemplate.
    Regards

  • Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    "Catalog"?  Are you referencing Ps Elements perhaps?
    Wrong forum.  We do not do Elements here.
    Here's the link to the Elements forum:
    Photoshop Elements

  • Photoshop Opens 8bit TIFF files as Camera Raw

    My normal workflow consists of opening RAW files in ACR, making adjustments, then moving on to Photoshop where I apply retouching and build clipping paths. I then save the file as an 8bit TIFF. I rarely reopen these 8bit TIFFs again, but when I did so recently what I encountered was not what I expected.
    My Photoshop (CS6) is opening 8bit TIFF files as Camera Raw when selected by "right click" followed by "Open with Photoshop CS6". I remember being able to open 8bit TIFF files directly in Photoshop, but I think this change has occurred since installing CS6.
    Again, files in question began as 16bit Raw files, but were worked on in Photoshop CS6 (retouching) and saved with clipping paths. This would reduce them to 8bit files. When placed in page layout, clipping paths work properly, confirming that paths are intact.
    When I want to open the files again - say from Bridge or a Finder window - by the method "right click - Open with Photoshop CS6", the file is opened first in Camera Raw, and then in Photoshop, and the path(s) is missing.
    I can open these TIFF files and access Paths but only if I locate and select the file from within Photoshop (File/ Open.../). The Open window gives "Format" as Camera Raw (which it isn't, having been saved as 8bit file). If I override  format to "TIFF", the file opens with clipping path shown.
    What might be going on here and how can I correct it?

    DaleH wrote:
    I set the preference to automatically open JPEGs and TIFFs with settings.
    That's the reason for Adobe Camera Raw being automatically used to open TIFFs which were previously sent from ACR to Photoshop. The TIFFs have ACR settings because they originated as images generated from raw files by ACR. If you don't want ACR to be invoked when opening such files by a right-click then set the preference to "Disable TIFF support".
    DaleH wrote:
    I didn't manually set the bit depth.
    When I saved the file with a clipping path it automatically dropped down to 8bit.
    That's not happening here with CS6. 16 bits per channel are maintained when saving TIFF from Ps, regardless of there being a clipping path. Are you certain that the ACR workflow options definitely said 16-bit, as shown below, when ACR initially generated the images from raw and passed them to Ps?

  • Cannot save files from Camera Raw in JPG format.

    Since running updates to my Adobe Elements 10 program recently I cannot save the files from Camera Raw in  JPG format any longer. I can save the files in other formats but not in JPG format. I need to save some files in JPG format to submit for a photographic course I am doing.
    Pleasae assist.
    My emailo contact is as below
    [email protected]

    Change to 8 bit for jpeg and then click open image.
    Click to view

  • CS6 32-bit HDR files open as 8-bit in Camera Raw 7.3

    As the title says my 32-bit HDR files open as 8-bit in Camera Raw 7.3.  I have a Win 7 32-bit system.  I create the 32-bit HDR and then save it as a 32-bit TIFF but when I open it in PS CS6 via Camera Raw 7.3 it comes in as only 8-bit.

    As far as i know acr won't output an 32 bits/channel file (hdr), but you should be able to change acr so photoshop gets a 16 bits/channel image by clicking on the
    Workflow Options at the bottom of the acr dialog and set the depth to 16 bits/channel.

Maybe you are looking for