Error Opening PDF on Citrix Server

I have version 8.1.2 Acrobat Reader. I have same version installed on 4 Citrix servers. I opened a PDF on 2 of the 4 severs and get a file could not be opened, file might be corrupted or the file or email may have not decode properly. The same file works fine on the other 2 servers. Any ideas??

Update:
Opened the Pdf and found out that the certified signature has become invalid.

Similar Messages

Error opening PDF files from search results webpart on anonymous SharePoint 2013SP1 site with IE

Clicking search results, in the strict sense pdf files, using IE on an anonymous SharePint 2013SP1 site, I received the error: There was an error opening this document. The filename, directory name, or volume label syntax is incorrect.
I would like to solve this problem on the server side.
Starting position:
SharePoint 2013 SP1
Web Application:
based on template 'Publishing Portal'
Anonymous Access enabled
Claims based authentication: Integrated Windows Authentication NTLM
Client Integration disabled
Site Collection:
Anonymous Access enabled for 'Entire Web site' => group 'Anonymous Users' was created
added permission to open items: $Web.AnonymousPermMask64 = "ViewListItems, ViewVersions, ViewFormPages, Open, ViewPages, UseClientIntegration, OpenItems"
Client side solutions:
c1) Open Link with “Open in new tab” or “Open in new window” => OK
c2) Disable IE Add-on “Adobe Acrobat Sharepoint OpenDocuments Component” => OK
c3) Set bDisableSharePointFeatures to 1 in regetit => OK
Server side solutions:
S1) Turn off Client Integration => didn't work, still same error
S2) Modify DOCICON.XML => didn't work, still same error
I gave these two options a chance:
first: <Mapping Key="pdf" Value="icpdf.png" OpenControl="SharePoint.OpenDocuments"/>
then: <Mapping Key="pdf" Value="icpdf.png" OpenControl="AdobeAcrobat.OpenDocuments"/>
I modified DOCICON.XML on both hives 14 and 15.
Remarks:
- After changingparameters I allways did an IISreset.
- As far as I understood I can only change bDisableSharePointFeatures on Client Side.
Any help, suggestion, idea wellcome!
Thanks!

Hi folks, here's the reason for my problem. I used the oob search result web part. The result items (PDF items) are rendered by the template Item_PDF.html/Item_PDF.js. This template holds a code snippet that assigns a certain OpenControl to the PDF item - that's hard coded. So, no matter what you configure in DOCICON.XML, the PDF item will be opened with the control "PdfFile.OpenDocuments". Solution is e.g. just to leave the OpenControl blank.
template:
/_catalogs/masterpage/Display Templates/Search/Item_PDF.html
/_catalogs/masterpage/Display Templates/Search/Item_PDF.js
code before:
ctx.CurrentItem.csr_OpenControl = "PdfFile.OpenDocuments";
code after:
ctx.CurrentItem.csr_OpenControl = "";
Enjoy
Harry

Error opening PDF files on anonymous SharePoint 2013SP1 site with IE

Clicking search results, in the strict sense pdf files, using IE on an anonymous SharePint 2013SP1 site, I received the error:
There was an error opening this document. The filename, directory name, or volume label syntax is incorrect.
I would like to solve this problem on the server side.
Starting position:
- SharePoint 2013 SP1
- Web Application:
- based on template 'Publishing Portal'
- Anonymous Access enabled
- Claims based authentication: Integrated Windows Authentication NTLM
- Client Integration disabled
- Site Collection:
- Anonymous Access enabled for 'Entire Web site' => group 'Anonymous Users' was created
- added permission to open items: $Web.AnonymousPermMask64 = "ViewListItems, ViewVersions, ViewFormPages, Open, ViewPages, UseClientIntegration, OpenItems"
- SC-Feature 'Limited-access user permission lockdown mode' disabled
Client side solutions:
c1) Open Link with “Open in new tab” or “Open in new window” => OK
c2) Disable IE Add-on “Adobe Acrobat Sharepoint OpenDocuments Component” => OK
c3) Set bDisableSharePointFeatures to 1 in regetit => OK
Server side solutions:
S1) Turn off Client Integration => didn't work, still same error
S2) Modify DOCICON.XML => didn't work, still same error
I gave these two options a chance:
first: <Mapping Key="pdf" Value="icpdf.png" OpenControl="SharePoint.OpenDocuments"/>
then: <Mapping Key="pdf" Value="icpdf.png" OpenControl="AdobeAcrobat.OpenDocuments"/>
I modified DOCICON.XML on both hives 14 and 15.
Remarks:
- After changingparameters I allways did an IISreset.
- As far as I understood I can only change bDisableSharePointFeatures on Client Side.
Any help, suggestion, idea wellcome!
Thanks!

Hi Harry,
From your description, I understand you encountered the issue when open PDF documents from search result page.
Here is a similar thread, please try the piece of code in the page layout for the search results page from Mitch B_83:
https://social.technet.microsoft.com/Forums/appvirtualization/en-US/545efcc6-b748-4df8-aee0-7f57f778ad1e/sharepoint-2010-opening-pdfs-in-search-results-the-filename-directory-name-or-volume-label?forum=sharepointgeneralprevious
You could refer to this for search result page layout: Site settings > Web Designer Galleries > Master pages and page layouts > SearchResults.apsx .
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Error opening PDF

Hi all,
I'm having problems opening PDF files. I'm using FM CONVERT_OTFSPOOLJOB_2_PDF to generate the file into the server.
Then I'm using class/method VIEWER->VIEW_DOCUMENT_FROM_TABLE to open it. The problem is that some files are opened and others don't.
It appears an error form Adobe Reader 'The file is damaged and can't be repaired ' .All the files are generated in the same way. Any clue what can be?
Thanks

Yes, they are all the same. I'm using FM 'gv_func_mod_name' to set printer definitions. All outputs have the same.
When I open PDF files directly from the server, there are no errors. It only happens when I use the report.

Unable to open pdf from mapped server.

Does anyone know why all of the sudden adobe will not let you open any pdf from a mapped server? it seems to have happened after a update to adobe. I have uninstalled the newest version and tried an older version and I still have the same issue.
Message reads: There was an error opening this document. The network path was not found.
I can copy the file to the computer and it will open fine. Seems to be an adobe issue that just took place in the last couple of days.

What happens when you open the Adobe app, then tell it to open the file?
How big are the attachments? There are limitations to the size allowed to be sent:
Email Provider
Size Limit
Gmail
25Mb
Outlook
20Mb
Yahoo
25Mb
Are you sending the files to yourself? Not sure how you are emailing files from a website...
Are the PDF's password-protected, or some kind of copyrighted eBook perhaps? Can you email other files successfully, or are PDF's the only files that don't work?
Perhaps using a free Cloud service as an intermediary might work better.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Error - Open PDF Files

Hello,
Adobe Reader blocked himself when the software tried to open a PDF File (the PDF File is standard, no special things). A protected mode message is displayed but this mode is disabled in the preferences. In order to resolve the issue, I have to reboot the server. The version of Adobe Reader which is installed is the latest one. Have you already noticed such issue? What should I do in order to avoid the problem?
Thanks,

I can't open PDF files in Explorer. When I try I get an error box that says
Internet Explorer has quit working
     Windows can check for a solution
     Check Online
     Close program
I have reinstalled Adobe and the problem is still there
I can open PDF files without going to Explorer

Error opening PDF downloaded from Interactive Report

hi -- I'm getting an error opening a PDF file downloaded from an interactive report.
I've seen on the forum that this could be related to the size of the file, but I've tried
this out on 10-row results (1k files) and it's still an issue.
I save the file to my file system. If I try to open it in Adobe Reader, I get:
File does not begin with '%PDF-'
and
Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded).
If I try to open in Internet Explorer, I get:
File does not begin with '%PDF-'
Other users are having the same problem. Download to csv and open in Excel works fine.
Do I need to have special print attributes for this? I didn't think so... I'm just using the defaults
(response header = report settings, content disposition = attachment).
Ideas?
Thanks,
Carol

Hi,
I'm having the same problem that was described above, and my site does have BI Publisher installed, and it does successfully produce readable pdfs for many reports.
But there are other reports, even reports produced using the Apex Wizard and all defaults, that just keep producing the same Adobe Reader error reported above, ie
"Adobe Reader could not open <filename>.pdf because it is either not a supported
file type or because the file has been damaged (for example, it was sent as an email
attachment and wasn't correctly decoded)."
Any suggestions?
Cheers,
Peter

Error opening pdf file, but then it still opens

I am having trouble when I open a pdf.I am using the code below to open a pdf.
on mouseUp me
acro = bafindapp("pdf")
if acro = empty then
    acrofile = me.pPDF
    alert "This program was unable to find a suitable program on your system to open a PDF document. It will open www.adobe.com, where you can download a free viewer"
    goToNetPage "http://www.adobe.com"
else
    open the moviePath & "Resource\" & me.pPDF with acro
end if
end
When this is on a button, adobe reader will open, but gives an error saying "There was an error opening this document. This file cannot be found."
When I hit the ok button on the error notice, the pdf opens.
Any ideas why I am getting this message even though the pdf opens after dismissing the message would be appreciated.

The reason I assumed, or asked, whether it was Windows-only is because of your use of the backslash character as the folder delimiter. To make the script cross-platform try the following:
on mouseUp me
acro = baFindApp("pdf")
if ( acro = EMPTY ) then
    alert "This program was unable to find a suitable program on your system to open a PDF document. It will open www.adobe.com, where you can download a free viewer"
    goToNetPage "http://www.adobe.com"
else
    mPath = _movie.path
    tFile = mPath & "Resource" & mPath.char[length(mPath)] & me.pPDF
    if baFileExists(tFile) then
      OK = baOpenFile(tFile, "normal")
      if ( OK < 32 ) then
        -- see docs for numbers and their meaning
        alert "Error opening file:" && OK
      end if
    else
      alert "File not found:" &RETURN& tFile
    end if
end if
end

Error opening PDF files on the network

I have documents in PDF format on my internal network, but when I open them directly from the network using the Adobe Reader, I get the following message:
"There was an error opening this document. The network path was not found". But this occurs in only a few users, and possibly users who did not have this error, they have. We found that uninstalling and reinstalling the software solves the problem, but then it returns. Is there any explanation?

Adobe Reader 11.0.09;
Microsoft Windows 7 Professional;
I'm accessing the file from a local network drive. The file is located in one of our servers.

Error opening pdf and file can't be found,why

I received an attachment in my BT emails and opened it,then printed it.When I tried to find it so I could copy it to my Outlook emails it had disappeared. Adobe said there had been an error opening it and the file could not be found.What happened and why?
Hacien

I described what had happened when I tried to view a pdf, and said that when I found the pdf and tried to open it again, all I had was a message telling me there had been “an error” and as a result the file could not be found. I don’t know if it was hidden or deleted and asked “why did it happen”
If Adobe does not give me any more information than that, how am I supposed to give any more information?
It was the first time I had used the Adobe reader, and I was not expecting someone to be so terse in their reply to my query. As the song says, “Everybody’s got to learn some-time.” It would be easier if the ones who DO know could remember the time when they didn’t know.
To avoid further embarrassment, I will withdraw and not attempt to use your forum again.

Error opening PDF in 9.1.0 ("Insufficient Data for image") and 7.0.9

I generate PDF documents in code (basically converts TIFF images to PDF, using FOP).
Few of the PDFs can not be viewed on Adobe Reader 9.1.0, and 7.0.9. But, these open fine on 8.0 version.
With 9.1.0 version I get error as "Insufficient Data for image"
With 7.0.9 the error is "A drawing error occured"
8.0 works fine and opens the PDF.
Is there any issue with 9.1.0 for opening PDFs, I got this version installed recently on my system.
Appreciate an early help/views on this issue.
Thanks,
Umakant

Try this - from adobe support!
It worked for me and (as it seems) solved a one year long anoying issue.
1. Exit Acrobat.
2. Choose Start > Run, and type: %APPDATA%\Adobe\Acrobat\ into the Open text box. Click OK.
3. Right-click either the 6.0 or 7.0 folder, and choose Delete.
I deleted both folders.
Dont worry these two preferences folders will automatically be renewed by acrobat!

Error opening PDF on photoshop error code 0X20030055

Hi you all, I desperaly need help.
I've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I did not find anything helpful online.
I can open this pdf file outside photoshop.
no problem openning other pdf files on photoshop. (i've done it many times before)
help anyone? I'm really stuck..

try changing the option while making it (with illustrator cs3)

Error opening pdf's from PC stored on Mac

I have been experiencing an error when attempting to open pdf's stored in the public folder on our Mac.
The message reads:
"There was an error opening this document. The file is already open or in use by another application."
It doesn't matter which PC we use to access the pdf's from and happens regardless of which version of Acrobat is being used, the same error occurs.
The public folder on the Mac has no restrictions.
Mac 3.2 GHz Quad-Core Intel
OS 10.9.4
Adobe Creative Suite 2014
*Also discovered none of the InDesign, Photoshop or Illustrator files can opened from PC's can be opened while they are stored on the Mac either.
Thanks,
Chuck

Thanks for responding. We do not work using a Windows domain.
I can open .txt and Microsoft Publisher files, but I get errors on nearly everything else including any Adobe product files and Word files.
We used to keep files both the PC and Mac had to access on an external network drive, but exporting pdf's from the Mac (as well as opening and saving) took too long. So we moved everything to the Mac. If I have to work on a file I have to drag it to the PC desktop. We can't save directly to the Mac either. Files have to be copied onto the Mac.

Error Opening PDF from IE

When I click on a PDF link in a website in Internet Explorer 6, I receive the following error: "There was an error opening this document. This file cannot be found." I can choose to save the file to disk and then it opens normally from there. All our computers here should be configured the same and this works properly on another computer.
This originally occurred using Adobe Reader 8.0.0, so I downloaded and installed 8.1.2 and it still is doing the same thing.
I tried right clicking the link to open in a new window but I am receiving the same message either way.
Any help would be appreciated.
Matthew K.

Check the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Software\Adobe\Acrobat\Exe
Here check the default value. On an english machine, it has to be set to:
"C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe"
If you installed Adobe reader to a different directory, enter the path where "AcroRd32.exe" is to be found.

Error opening PDF using webdynpro

Hello All,
I created a webdynpro application that opens a pdf document using the code described in the following link.
Open PDF in New External Window
I am getting the following error:
"There was an error opening this document. The file is damaged and could not be repaired"
But I am able to open the same file using another ASP application.
Am I missing anything?
Thanks in advance.

Nikhil and Vinod,
Thanks for your response. I used this code but it is not working. I am still getting the same error.
In my application, I am not reading the pdf from a file. Instead, it is stored in the database as a blob. I am reading the data using the following code:
Blob pdfBlob = resultSet.getBlob(COLUMNNAME)
byte[] pdf = new byte[1024]
pdf = pdfBlob.getBytes(1,(int)blob.length());
I am storing this value in a context and then displaying it as a pdf. I am using the following code to get bytes
byte[] pdfBytes = wdContext.currentElement().getBLOB(); (BLOB - name of the context attribute where bytes are stored)
and using the following code to open the pdf document (as suggested)
IWDResource pdfResource = WDResourceFactory.createResource(pdfBytes,"test.pdf",WDWebResourceType.PDF);
* wdComponentAPI.getWindowManager().createNonModalExternalWindow(pdfResource.getUrl(0),"test.pdf").show();*
Am I missing anything here?
How can I force the pdf document to open in a browser window instead of Adobe?
Thanks in advance.

Error Opening PDF on Citrix Server

Similar Messages

Maybe you are looking for