%Error opening tftp://...(No such file or directory)

I am trying Software Distribution by Image choosing from my Software Repository.
Getting the title as a failure from SWIM.
Need help.
kat

Thank you for your response. It turns out I had a third party program that was changing the file designation of the .bin and was trying to mount it in a virtual drive. after turning that off it worked like a charm!

Similar Messages

Ld.so.1: sqlplus: fatal: libm.so.2: open failed: No such file or directory

Hi,
I m getting the below error while connecting to sqlplus:-
sqlplus
ld.so.1: sqlplus: fatal: libm.so.2: open failed: No such file or directory
Killed
regards,
Bhatia

Bhatia,
Did you source the env file before running sqlplus? If yes, please issue the following:
$ cd $ORACLE_HOME/bin
$ relink utilitiesMake sure that sqlplus is relinked successfully and try it again.

Find: stat() error /proc/26354: No such file or directory

Dear everyone,
I am using Solaris 10u8 on 02 Sun Fire X4240 servers. I also installed Sun Cluster 3.2u3 and Oracle RAC 10gR2 for these 2 servers.
When I tried to execute the find command, I receive the result I need. However, in the end of the output, I saw additional lines:
+# find / -name * log -print | grep samba+
+/var/svc/log/network-samba:default.log+
+/var/samba/log+
+/etc/svc/volatile/network-samba:default.log+
+{color:#ff0000}find: stat() error /proc/26354: No such file or directory{color}+
I also tried with less complex syntax but got the same result, for example:
+# find / -name samba+
+/var/spool/samba+
+/var/samba+
+/usr/sfw/lib/webmin/caldera/samba+
+/usr/sfw/lib/webmin/mscstyle3/samba+
+/usr/sfw/lib/webmin/samba+
+/etc/init.d/samba+
+/etc/webmin/samba+
+/opt/SUNWscsmb/samba+
+{color:#ff0000}find: stat() error /proc/24252: No such file or directory+
+find: stat() error /proc/24345: No such file or directory{color}+
I don't know why these unormal outputs appeared. Does anyone know what the problem is here ?
Any advice from you is appreciated. Thanks for your help and please help me in this case.
Thanks.
HuyNQ.

/proc is a virtual filesystem reperesenting running processes.
By doing a a find from / your allowing find to pass though /proc.
Those errors indicate processes that exited while the find was running. So the files suddenly disappeared.
The errors are harmless. But if possible, try not to allow find to scan /proc.

Error: sysace_stdio.h: No such file or directory

i create an application "read_from_compact_flash" with edk tool ,this application contain the flowing sources :
ReadText.c
StackAndHeap.c
StackAndHeap.h
when i try to bluid this application the errors is occur:
cygdrive/e/p08/module2/ReadText.c:1:26: error: sysace_stdio.h: No such file or directory
/cygdrive/e/p08/module2/ReadText.c: In function 'main':
/cygdrive/e/p08/module2/ReadText.c:13: error: 'FILE' undeclared (first use in this function)
/cygdrive/e/p08/module2/ReadText.c:13: error: (Each undeclared identifier is reported only once
/cygdrive/e/p08/module2/ReadText.c:13: error: for each function it appears in.)
/cygdrive/e/p08/module2/ReadText.c:13: error: 'TextFp' undeclared (first use in this function)
/cygdrive/e/p08/module2/ReadText.c:21: warning: incompatible implicit declaration of built-in function 'malloc'
/cygdrive/e/p08/module2/ReadText.c:23: error: 'NULL' undeclared (first use in this function)
make: *** [compact_flash/executable.elf] Error 1
Done!
just for information i import the library "xilfatfs" in mss fille.
any one help me please and thinks

If you're not sure if you have the SDKs, can you confirm you have the files under /Developer? Check for /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6/include/X11
I don't remember having to do anything special to get gcc to find these files.
From what I've noted, the usual trigger seems to be that the X11SDK.pkg package wasn't installed.
Typical PATH export is:
export PATH="/bin:/sbin:/usr/bin:/usr/sbin"
If you're working with Fink, there's a call to the following needed:
. /sw/bin/init.sh
See http://finkproject.org/doc/users-guide/install.php
But I'd first make sure the X11 SDK was installed. I'd guess that is missing.

Hard Drive Error after Erasing - "No Such File or Directory"

I have a Western Digital My Passport 400GB external HD (bought in April 09). It's been working great but I had it on FAT formatting and let's just say transfers are slow. I borrowed another external drive to back everything up so I could reformat this drive to Mac OS.
Problem came after I backed up everything...I ran Disk Utility to erase the HD and format it in Mac OS Extended (journaled). It successfully erased the Hard Drive on All Zeros, taking 6 days, 5 hours, 50 minutes. Then when it tried to partition, I got the error No Such File or Directory. Here's the log:
"Preparing to zero disk : “Untitled”
Secure Erase completed successfully in 6 days, 5 hours, 50 minutes.
Preparing to erase : “Untitled”
Creating Partition Map
Disk Erase failed with the error:
No such file or directory
Erase complete."
So now the hard drive icon doesn't show up on my desktop, but is recognized in DU (without a volume however). Therefore there is no Mount Point and the drive remains unformatted. Any attempt in DU to partition or erase yields the same error message. Searched these discussions for days now without any luck. Please help!

Welcome to the Apple discussions.
I'm not following your problem description .... You said that you successfully erased the hard drive. The next step would be to partition it by giving it a name (you can give it a name under partition or under the erase function) - don't leave it as 'untitled', using Mac OS extended (journaled), a partition size, and ensure under options it says Apple partition map. There are no erasures involved when you partition the drive, which is where I'm confused over your problem description.

Pacman issue - error: .. : No such file or directory.

It seems I have my first issue, and it's with Pacman. I get this error everytime I sync the database or install a package, even though everything seems to go fine.
error: /var/lib/pacman/extra/flite-1.3-2/desc: No such file or directory
I don't know what flite is but it won't install it as it doesn't exist even though there is a directory called "flite-1.3-2" and it's empty. I've tried removing the directory but synching the database doesn't put it back. Also I've used 'pacman -Scc' to clear cache but still no joy.

archuser wrote:
It seems I have my first issue, and it's with Pacman. I get this error everytime I sync the database or install a package, even though everything seems to go fine.
error: /var/lib/pacman/extra/flite-1.3-2/desc: No such file or directory
I don't know what flite is but it won't install it as it doesn't exist even though there is a directory called "flite-1.3-2" and it's empty. I've tried removing the directory but synching the database doesn't put it back. Also I've used 'pacman -Scc' to clear cache but still no joy.
delete the directory /var/lib/pacman/extra and run pacman -Sy to restore. I believe if you delete just the flite directory it won't restore with Sy.

Error: jndi.properties (No such file or directory)

Hi,
I created my EJB and a desktop application in the NetBeans.
I load my EJB on GlassFish
I still load my appCliente on NetBeans, nice it works.
But when I try to run my appClient just clicking on its icon in
its directory it doesn't work.
The message is jndi.properties (No such file or directory), but
the file is there.
My peace code:
Properties props = new Properties();
try{
props.load(new FileInputStream("jndi.properties"));
TesteEJBRemote t = (TesteEJBRemote) new InitialContext(props).lookup("Teste");
jTextField2.setText(t.getMessage() + t.toString());
}catch (IOException ex) {
//atxErros.setText(ex.getMessage());
Logger.getLogger(frmFrame.class.getName()).log(Level.SEVERE, null, ex);
jTextField2.setText(ex.getMessage());
} catch (NamingException ex) {
//atxErros.setText(this.atxErros + " " + ex.getMessage());
Logger.getLogger(frmFrame.class.getName()).log(Level.SEVERE, null, ex);
What shoud I do?

I've looked into Oracle Database 10g Express Edition (Universal), a .deb file, found no occi.h but did find lots of .so files (linux shared libraries). I'll try and adapt my code and Netbeans/g++ to that and see if it works...
I can't really install it since my 4GB computer is x64 and my i386 "only" has 186RAM... Enterprise Linux Release 5 Media Pack for x86 64 (64 bit) is 5.1GB+updates (~5GB each)... Not gonna waste my time installing that just for a project.
I sense i'm missing something obvious... although there's nothing obvious about *.oracle.com... information company they say? ;)

Error: bad interpreter: No such file or directory

Solved....if you ever executing any file from the $iAS/bin directory and get the "bad interpreter: No such file or directory" then all you do is edit that file in vi or whatever, the look at the first line where it said #!/bin/ksh (in by case, it uses Korn shell I guess to interpret the script, in fact I don't have ksh install) and check to see if you have that particular file in /bin directory. If not, all you do is just make a sym link to /bin/sh under the name of /bin/ksh (assuming you have bash shell installed). The problem will be solved then.
Hope this help some of you out as it does for me as a newbie in Oracle products. :)

Hi,
Rather, you can refer the below note and use the attached SQL script to create OPS$ user. It is for windows but works for unix also.
50088 - Creating OPS$ users on Windows NT-Oracle
use the attachement ORADBUSER.SQL.
OR refer the below post. I have replied to the similar query (Oracle Procedure usign SQLPLUS)..
[Re: Backup recovery test|Re: Backup recovery test]
Regards,
Rajesh Narrkhede

Error: occi.h: No such file or directory

I'm working on an university project where Oracle is imposed, so i need to configure it on my machine.
I downloaded the instant client for AMD64 (64bit version) here, for it appears that's the place where occi.h would be. I also downloaded OCCI and tried using the occiCommon.h it contained, but it too refers occi.h, so i'm stranded. Plus, that .tar.gz is for RedHat and for an old version of g++. I'm using Debian (kernel 2.6.26-1-amd64) and g++ 4.3.2 - i assume the distro is irrelevant, but g++ version might not be.
So far the best post i've found was this, but it relies on rpm packages which are not available, only zips. Later on it provides instructions on where to unzip them to, but the files it refers seem different from those in the actual zip and i have no oracle/ in my /usr/lib
Where can i get the required files to connect to an Oracle 10g database using C++? Are there any alternatives to OCCI? Would Netbeans be easier to use? Where do i put them? What would the g++ command be? I'm using with -l and -L pointing to the same directory, where i've unziped everything, but that doesn't seem to do it. Also the files are mostly .o and .jar, not .h.
Thanks.

I've looked into Oracle Database 10g Express Edition (Universal), a .deb file, found no occi.h but did find lots of .so files (linux shared libraries). I'll try and adapt my code and Netbeans/g++ to that and see if it works...
I can't really install it since my 4GB computer is x64 and my i386 "only" has 186RAM... Enterprise Linux Release 5 Media Pack for x86 64 (64 bit) is 5.1GB+updates (~5GB each)... Not gonna waste my time installing that just for a project.
I sense i'm missing something obvious... although there's nothing obvious about *.oracle.com... information company they say? ;)

[SOLVED] Error : sys\stat.h: No such file or directory

I get "...sys\stat.h: No such file or directory" error when compiling a simple C program. i have been searching for a while on web and see people writing "# pacman -S base-devel" i have that already and some more packages like glib ...
These are the includes i am using :
#include <stdio.h>
#include <stdlib.h>
#include <io.h>
#include <fcntl.h>
#include <sys\stat.h>
// here is when i use the libraries sys/stats.h
struct stat stbuf;
stat(argv[2], &stbuf);
int infSize = stbuf.size;
This is the output of the command "gcc -o copy copy.c" :
copy.c:3:16: error: io.h: No such file or directory
copy.c:5:22: error: sys\stat.h: No such file or directory
copy.c: In function 'main':
copy.c:35: error: storage size of 'stbuf' isn't known
Either i am missing any package needed or the gcc compiler is missing any lib directory. But i dont know which one is it.
Any ideas are apreciated. Thanks you
EDIT : The error was actually on #Include <io.h> , but i dunno why it conflicted with #include <sys\stat.h>.
Anyway Problem Solved.
Last edited by puzzled (2008-10-05 17:07:03)

If you're not sure if you have the SDKs, can you confirm you have the files under /Developer? Check for /Developer/SDKs/MacOSX10.4u.sdk/usr/X11R6/include/X11
I don't remember having to do anything special to get gcc to find these files.
From what I've noted, the usual trigger seems to be that the X11SDK.pkg package wasn't installed.
Typical PATH export is:
export PATH="/bin:/sbin:/usr/bin:/usr/sbin"
If you're working with Fink, there's a call to the following needed:
. /sw/bin/init.sh
See http://finkproject.org/doc/users-guide/install.php
But I'd first make sure the X11 SDK was installed. I'd guess that is missing.

Compile error during make: ansidecl.h: No such file or directory

Hi - I was trying to make a ruby app and I ran into the following error which seems to have originated in gcc. I can't seem to find much about it on Google, would very much appreciate some help with how to get to the bottom of this, thanks!:
checking for main() in -liberty... no
creating Makefile
In file included from dirfibheap.h:5,
from dirfibheap.c:2:
*fibheap.h:44:22: error: ansidecl.h: No such file or directory*
make: * \[dirfibheap.o] Error 1
gcc -fno-common -g -Os -pipe -fno-common -pipe -fno-common -pipe -fno-common -I. -I/usr/lib/ruby/1.8/universal-darwin8.0 -I/usr/lib/ruby/1.8/universal-darwin8.0 -I. -c dirfibheap.c

Apple's gcc doesn't come with this file. It is unlikely that simply getting a version of the file will work. My guess is that you would have to either install an alternative version of gcc which includes it or edit the source code of the app you're compiling to avoid it. Whether either of these would work, I can't say. Obviously this application is not ported to or supported on Mac OS X (if it is meant to be, report the bug). That means there are likely other issues which will crop up if you sort this one. I don't say this to put you off but only as a warning. (This may be superfluous and you may know all this very well. If so, my apologies.)
What are you trying to compile? Have you tried the forums for the application? Has anybody else compiled it for OS X? Have you seen if Fink or Mac Ports have it?
- cfr

Ld.so.1: oracle sid : fatal: libjox8.so: open failed: No such file or direc

RDBMS Version: 8.1.7.4
Operating System and Version: trusted solaris intel 8
Error Number (if applicable):
Product (i.e. SQL*Loader, Import, etc.): installation of patch set 8.1.7.4
Product Version: 8.1.7.4
ld.so.1: oracle<sid>: fatal: libjox8.so: open failed: No such file or directory
I get this error when connecting to with SQLPLUS to Oracle.
I have reordered paths in LD_LIBRARY_PATH
so $ORACLE_HOME/lib is before /usr/lib
and recompiled make -f ins_rdbms.mk install
and make -f ins_rdbms.mk ioracle
I can only connect as oracle in the install group
I have found some posts the suggest changing mode of the oracle executable. but that doesn't seem to help.
I have tried to $ORACLE_HOME/bin/relink all
but that didn't help either.
Please advise.

According to the following docs, you should not get this error when you apply Patch 8904424 so I would suggest you log a SR.
Patch 8557019: make: Fatal error: Command failed for target `dejvm'0.1.2/lib32/WS6U1/crti.o: open failed: No such file or directory (Doc ID 1291895.1)
make: *** [dejvm] Error 1 While Applying 8557019 For Forms Upgrade Doc 437878.1 (Doc ID 1543498.1)
Thanks,
Hussein

TMS_ORA10g: fatal: libclntsh.so.10.1: open failed: No such file or director

While trying to boot up the Tuxedo Server, we are getting the error:-
exec TMS_ORA10g -A :
ld.so.1: TMS_ORA10g: fatal: libclntsh.so.10.1: open failed: No such file or directory
This file, libclntsh.so.10.1, is present in the /oracle/app/product/10g2/db_1/lib32 dir, which is included the LD_LIBRARY_PATH environment variable. We build the TMS_ORA10g executable with the following command :- buildtms -o TMS_ORA10g -r Oracle_XA and the corresponding entry in the udataobj/RM file is "Oracle_XA:xaosw:-L${ORACLE_HOME}/lib32 ${ORACLE_HOME}/lib32/libsql10.a -lm -lC -lclntsh"

Hi,
After your advice we migrated our Tuxedo to 64 bit's and now all the object files and libraries are of 64 bit. The problem related with buildtms has been resolved. But even after this we are facing an issue, while building the Application Server(BAS). When we do BAS (Build Application Server), we get this error:-
Undefined first referenced
symbol in file
int sqlcxt(void**,unsigned*,sqlexd*,sqlcxp*) /users/appbin/lib/libUTCS/xlerrlib.a(dm_olpa.o)
tpurcode /users/appbin/lib/libUTCS/tuxedoreal.a(oltp.o)
tperrno /users/buildsrv/InitW1/security/homebs/src/lib/sparc/security_qpp1.a(security_et_sy00102
getusr_dtls.o)
int sqlbuft(void**,char*) /users/appbin/lib/libUTCS/xlerrlib.a(dm_olpa.o)
ld: fatal: Symbol referencing errors. No output written to /users/buildsrv/InitW1/server/securityET
What could be the possible reason for the same.
The entire command for BAS is
CC -xtarget=ultra -xarch=v9 -xarch=v9 -w -mt -I$TUXDIR/include -o /users/buildsrv/In
itW1/server/securityET BS-6ddd.c -L${TUXDIR}/lib /users/buildsrv/InitW1/server/sttqz.c /users/buildsrv/InitW1/server/main.c
/users/appbin/lib/libUTCS/conv.o /newutitux/newtux/tuxedo9.1/lib/libtux.a /oracle/app/product/10g2/db_1/lib/libsql10.a /use
rs/appbin/lib/libUTCS/rpcqz_date.o /users/appbin/lib/libUTCS/dm_auditinfo.o /users/buildsrv/InitW1/security/homebs/src/lib/s
parc/security_qpp1.a /users/buildsrv/InitW1/security/homebs/src/lib/sparc/security_query1.a /users/buildsrv/InitW1/security/
homebs/gencode/lib/sparc/security_dm1.a /users/buildsrv/InitW1/security/homebs/gencode/lib/sparc/security_const.a /users/bui
ldsrv/InitW1/security/homebs/gencode/lib/sparc/security_rpc1.a /users/buildsrv/InitW1/security/homebs/gencode/lib/sparc/secu
rity_rpcqry1.a /users/compogsw/InitW1/lib/libUTCS/sparc/master_qpp1.a /users/compogsw/InitW1/lib/libUTCS/sparc/master_query1
.a /users/compogsw/InitW1/lib/libUTCS/sparc/master_dm1.a /users/compogsw/InitW1/lib/libUTCS/sparc/master_rpc1.a /users/compo
gsw/InitW1/lib/libUTCS/sparc/master_rpcqry1.a /users/compogsw/InitW1/lib/libUTCS/sparc/ext_intf_qpp1.a /users/compogsw/InitW
1/lib/libUTCS/sparc/ext_intf_query1.a /users/compogsw/InitW1/lib/libUTCS/sparc/ext_intf_dm1.a /users/compogsw/InitW1/lib/lib
UTCS/sparc/ext_intf_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/ext_intf_rpcqry1.a /users/compogsw/InitW1/lib/libUTCS/sp
arc/scheme_qpp1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_query1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_d
m1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/scheme_rpcqry1.a /users
/compogsw/InitW1/lib/libUTCS/sparc/common_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/party_rpc1.a /users/compogsw/InitW
1/lib/libUTCS/sparc/holding_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/oth_srvc_rpc1.a /users/compogsw/InitW1/lib/libUT
CS/sparc/comp_red_rpc1.a /users/compogsw/InitW1/lib/libUTCS/sparc/utility_lib.a /users/appbin/lib/libUTCS/libmem.a /users/ap
pbin/lib/libUTCS/utillib.a /users/appbin/lib/libUTCS/dmstdlib.a /users/appbin/lib/libUTCS/tuxedoreal.a /users/appbin/lib/lib
UTCS/xlerrlib.a /users/appbin/lib/libUTCS/xlclasslib.a /users/appbin/lib/libUTCS/libclass.a /users/appbin/lib/libUTCS/utilli
b.a /users/appbin/lib/libUTCS/Qmystring.o -ltux -lbuft -L${ORACLE_HOME}/lib -lclntsh -lfml -lfml32 -lengine -R/usr/lib/lwp
-lpthread -lposix4 -lsocket -lnsl -lm -lnsl -lsocket
Please reply
Regards,
Namit Maheshwari

Not such file or directory, icloud garageband

hello, i just got in a very disappointing trouble using garageband, i uploaded songs to icloud and the i donloaded them again and edited them, everything was ok, till one day , i wanted to download one of my song from icloud but when i tapped on the green arrow for downloading, it told so:
an unexpected error has ocurred, not such file or directory"
but the preiew image of my song seems to be just like the last time i used it, and all my other songs downloaded ok, but this one just cant be downloaded
any solution?
i am even able to give a $0.99 app for the one who can get me oof this trouble

Hi--
mahongue wrote:
But what is strange is that even the commands stored in /usr/sbin were not recognized and this directory needed to be added as well. Strange.
One thing you have to keep in mind is that scripts like this aren't necessarily run by the same user as you, so they get a different environment. While I'm not familiar with Sleepwatcher and how it runs, I can give you different example of where this tripped me up.
I was setting up a backup script to run once a week as part of the periodic tasks that run overnight. When I tested them from the Terminal app, they worked fine. They even worked when I put the script into the /etc/periodic/weekly folder, and ran the weekly jobs like so:
<pre class="command">sudo periodic weekly</pre>
But they failed when run by the system at the appointed time. This was very frustrating until someone here pointed out that they were being run as root at the appointed time, so I need to take the root environment into account. Sure enough, if I made my self the root user like so ( "-" means to change to the new user's environment):
<pre class="command">sudo su -</pre>
I would get the same environment as the weekly periodic tasks were getting, so I could debug the script using the same environment where it was running.
I'm not sure why /usr/sbin wasn't in your $PATH, but don't forget that you can always use echo in your scripts to see that value of environment variables (if your script's output gets logged somewhere). I use that constantly as I'm working on scripts.
charlie

Getting `No such file or directory` error while trying to open bdb database

I have four multi-threaded processes (2 writer and 2 reader processes), which make use of Berkeley DB transactional data store. I have multiple environments and the associated database files and log files are located in separate directories (please refer to the DB_CONFIG below). When all these four processes start to perform open and close of databases in the environments very quickly, one of the reader process is throwing a No such file or directory error even though the file actually exists.
I am making use of Berkeley DB 4.7.25 for testing out these applications.
The four application names are as follows:
Writer 1
Writer 2
Reader 1
Reader 2
The application description is as follows:
‘*Writer 1*’ owns 8 environments and each environment having 123 Berkeley databases created using HASH access method. At any point of time, ‘*Writer 1*’ will be acting on 24 database files across 8 environments (3 database files per environment) for carrying out write operation. Where as reader process will be accessing all 123 database files / per environment (Total = 123 * 8 environments = 984 database files) for read activities. Similar configuration for Writer 2 as well – 8 separate environments and so on.
Writer 1, Reader 1 and Reader 2 processes share the environments created by Writer 1
Writer 2 and Reader 2 processes share the environments created by Writer 2
My DB_CONFIG file is configured as follows
set_cachesize 0 104857600 1   # 100 MB
set_lg_bsize 2097152                # 2 MB
set_data_dir ../../vol1/data/
set_lg_dir ../../vol31/logs/SUBID/
set_lk_max_locks 1500
set_lk_max_lockers 1500
set_lk_max_objects 1500
set_flags db_auto_commit
set_tx_max 200
mutex_set_increment 7500
Has anyone come across this problem before or is it something to do with the configuration?

Hi Michael,
I should have included about how we are making use of DB_TRUNCATE flag in my previous reply itself. Sorry for that.
From writers, DB truncation happens periodically. During truncate (DB handle is not associated with any environment handle i.e. stand-alone DB
) following parameters are passed to db->open function call:
DB->open(DB *db,
DB_TXN *txnid,          => NULL
const char *file,          => file name (absolute DB file path)
const char *database, => NULL
DBTYPE type, => DB_HASH
u_int32_t flags, => DB_READ_UNCOMMITTED | DB_TRUNCATE | DB_CREATE | DB_THREAD
int mode); => 0
Also, DB_DUP flag is set.
As you have rightly pointed out, `No such file or directory` is occuring during truncation.
While a database is being truncated it will not be found by others trying to open it. We simulated this by stopping the writer process (responsible for truncation) and by opening & closing the databases repeatedly via readers. The reader process did not crash. When readers and writers were run simultaneously, we got `No such file or directory` error.Is there any solution to tackle this problem (because in our case writers and readers are run independently. So readers won't come to know about truncation from writers)?
Also, we are facing one more issue related to DB_TRUNCATE. Consider the following scenario:
<ul><li>Reader process holds reference of database (X) handle in environment 'Y' at time t1
</li>
<li>Writer process opens the database (X) in DB_TRUNCATE mode at time t2 (where t2 > t1)</li>
<li>After truncation, writer process closes the database and joins the environment 'Y'</li>
<li>After this any writes to database X is not visible to the reader process</li>
<li>Once reader process closes the database X and re-joins the environment, all the records inserted from writer process are visible</li>
</ul>
Is it the right behavior? If yes, how to make any writes visible to a reader process without closing and re-opening the database in the above-mentioned scenario?
Also, when [db_set_errfile|http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_errfile.html] was set, we did not get any additional information in the error file.
Thanks,
Magesh

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

%Error opening tftp://...(No such file or directory)

Similar Messages

Maybe you are looking for