Error Opening the Database for the library... Aperture 3
I have read many forum entries. I have tried repairing and rebuilding, no success. When I select the library (5.77GB) while pressing Command+Option, It says there is an error opening so the First Aid screen never comes up. Help!!
Nolanski,
I assume that you have been able to open your library before. Is it still in the same location as the last time you were able to use it? Has anything changed in your setup on your computer since then?
nathan
Similar Messages
-
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks
Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics -
When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
JimHello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie -
I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
How can I solve this problem?
ThanksAfter a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
Have you tried the Aperture Library First Aid Tools?
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Try "Repair Database", and if this does not help: "Rebuild Database"
Regards
Léonie -
When I try to open Aperture 3- I get this message : There was an error opening the database for the library...(name of library).
The last time I tried to open the library I got a window requesting a conflict in library data. It ask if I wanted to resolve it. So I pushed the repair button.
Thanks in advance for your help !!William,
Thanks so much for your reply.
When first hooked up I reformatted the external as Mac OS Extended Journaled within Disk Utility.
I am not sure what HFS+ means. Can you help me there ?
Tom Rodgers -
There was an error opening the database for the library “~/Desktop/TEMP_aperture/Aperture Library.aplibrary”.
I am not able to open my Aperture - I have tried the recommendation from the manual page 839, but I do not get access to the window the manual says I should get, but instead it simply open the Aperture and the errort message come up
hanslundIf the Library First Aid window didn't open you might have not been holding the keys down all the way or else sometimes when you click the icon in the Dock this will happen.
Try this, close Aperture, locate the library in the folder Desktop/TEMP_aperture and then hold down the option and command keys AND then double click the library file. That should open the first aid window,
Post back if this doesn't fix the problem or you have more questions.
regards -
There was an error opening the database for the library "~/Pictures/Apertur
There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
What's up with this? Aperture showed this error a couple times before quitting when I tried to open it.I got the same error. Normally I would perform a Repair Database command by holding down Option-Command while launching Aperture, but that just gave me the same error without any options to repair the database.
Instead, I had to follow these instructions in the Aperture user manual. The key is to locate the Aperture library file on your hard drive and then hold Option-Command while double-clicking the Aperture library file.
Choose the REPAIR DATABASE option.
-- excerpt from user manual --
To repair or rebuild your Aperture library
Close Aperture, if it’s open.
Locate the Aperture library you want to fix, then hold down the Command and Option keys while double-clicking the Aperture library.
The Aperture Library First Aid dialog appears.
In the Aperture Library First Aid dialog, do one of the following:
To repair the permissions of the files within your Aperture library: Select Repairing Permissions.
This option should be used when Aperture can’t access some of the image files within the database or Aperture is unable to open the library itself. The Repairing Permissions option reviews each file in your Aperture library and sets the read and write access of each file where appropriate, allowing Aperture to access the files again.
Note: This option does not relocate referenced images whose master image files are offline. For more information about reconnecting offline images, see Reconnecting Missing or Offline Referenced Images.
To repair your Aperture library file: Select Repair Database.
This is the first option you should use if you believe there is something wrong with the Aperture library other than image file access issues.
To rebuild your database from scratch: Click Rebuild Database.
This option should be used as your last measure as it can be time-consuming for large image libraries. If you have tried repairing your database, and the issues you are encountering with your Aperture library still persist, you should use the Rebuild Database option. Aperture examines the library’s entire database and rebuilds each component until it reconstitutes your original Aperture library.
Depending on your selection, click Repair or Rebuild.
Aperture either fixes file permissions within the library or repairs or rebuilds the library, and then opens the application workspace. -
When I try to open my Aperture Library, I get this message: "There was an error opening the database for the library “/Users/alyssabouma/Pictures/Aperture Library.aplibrary”.
I have already uninstalled and reinstalled the library....Help!!lyssalou,
what is your Aperture version and what is your MacOS X version?
What happened, before this problem occurred? Did you import images, install software, move the Aperture library?
I have already uninstalled and reinstalled the library....Help!!
What do you mean by reinstalling the library? Did you reinstall Aperture?
You might start the trouble shooting with using the Aperture Library First Aid Tools - repairing the permissions, repairing the library, and rebuilding, if necessary, see:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Before rebuilding the library, make a backup of the Aperture Library, if you do not have one.
Regards
Léonie -
When I try to open aperture (which has worked great for months), I get this response:
There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Please help!! Thank you!! =)Sonny3300, your signature says "Aperture 2" - is that correct? Then you need this trouble shooting guide:
Aperture 2: Troubleshooting Basics: http://support.apple.com/kb/HT2945
What is your Operating system version and where is your library located? Have imported new images recently or changed the location of your library?
Regards
Léonie -
When i try to open aperture, i get a box popup that says;
Warning-There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Can anyone help? I cannot accesss aperture. this is the 1st time this has ever happened...
thanks,Try running a repair on the library. Hold the command and option keys down while starting Aperture, this will open the repair window. Select Repair Library.
See Aperture 3: Troubleshooting Basics
If you still have problems post back -
There was an error opening the database for the library “/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary”.
What do I do now. I cant access the photos on the drive. The only option is Quit? what ??????????
Please help ready to throw computer and drive out the window. I have a deadline of next Tuesdaythe 11th.Start Aperture while holding down the option and command keys. You'll get a Photo Library First Aid dialog as below.
Try Repair Database first. If that doesn't work, then redo the startup with option-command and try Rebuild Database. These repair processes can take a long time with a larger library.
If all that fails, you can try creating a new library from scratch and then try importing the old library into the new. This sometimes can fix problems that can't be repaired the First Aid way.
Also make sure the drive where the Aperture library is located is working properly. You can check it with Disk Utility app. -
There was an error opening the database for the library “/Users/madis13/Pictures/Nikon Transfer3/Aperture Library.aplibrary”.
What to do when it comes to such a notice?
If I want to open the aperture program, followed by a message, and the only option is to quit, but the program is not avanegichose import library.
That might be the problem.
If you want to import an image file in to an Aperture Library, you use the command
File > Import > Files
or
File > Import > Folders as Projects.
The command
File > Import > Library
is for importing whole iPhoto Libraries or Aperture Libraries. Have you tried to import the Aperture Library into itself?
However, the program did not open the catalog yet, and I did force quit.
Do you mean, after you tried to "import as library"?
Any success with the First Aid Tools as I suggested?
Hold the key combination ⌥⌘ firmly down and double click your Aperture Library. Then select a repair option from the panel.
Léonie -
I was uploading 655 images from my Nikon D300S to aperture, all was going fine, went to make a coffee and came back to find Aperture had quit and this message was on the screen ––
There was an error opening the database for the library “/Users/james/Pictures/Aperture Library.aplibrary”.
–– when I now try to open aperture I always get the same message and it won't open.
Any help would be greatly appreciated
Aperture 3.4.5 and OSX 10.8.5Thanks William Lloyd and IeonieDF
First opened First Aid by holding down alt and cmd while double clicking Aperture
Tried Repairing Permissions and repairing Database in First Aid but neither worked –– so then did a 'Rebuild Database' and I'm back in action
Thanks for taking an interest guys -
Trying to open Aperture, but I get the message, "There was an error opening the database for the library “/Users/davewasson/Pictures/Aperture Library.aplibrary”. - and it forces me to quit. What do I do?
Dave-
You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries. -
I now can't even open Aperture 3.2.2. I get the error msg. "There was an error opening the database for the library “~/Desktop/Aperture 3 Library.aplibrary”.
Have you tried the Library First Aid?
Locate your Aperture Library on the Desktop and hold down the option and command keys -and while holding down the keys double click the library file. The "first aid" wil give you options to repair the permissions, repair the library, or to rebuild the library. Try the options in this order and post back, if tis should not fix the problem.
Regards
Léonie
Maybe you are looking for
-
The requested URL /pls/portal/display.jsp was not found on this server.
Hi, I managed to get ultrasearch running now. The crawling process seems to run smooth. Executing a search gives me the correct result. However, i can not display the documents that are listed in the resultpage. The link to the document is like this:
-
Basically I have the program running great and works fine. But I have to get it to make you put in another date if it is less then 1582. But that's where it goes down to the end and prints out no years processed. But I have been trying to get it to e
-
After System Restore - Can't Re-Downlaod Programs once downloaded
I just purchased Creative Cloud and first downloaded Photoshop CS6, since I primarily use that. I then had a system crash and had to do a system restore. I chose a date a few days prior and it erased my Photoshop. I went to the App Manager and it
-
How to remove elements/attributes from XML using Xpath in XSLT ??
Hello , Is there anyway or method of Xpath from which I can delete the elements and attributes from XML at runtime ?? Like I have such XML and I have to remove per attribute highlighted below <person per="and"> <e:emp a="ir" b="ad" > </e:emp> </perso
-
Mapping logical URL to physical files
We want to have logical URLs for images (or other fypes)ypes). We do not want to expose physical location where the files are stoo thterthe usr weOther web servers have APIs for this (NSAPI and MSAPI have pron foon for this). I was wondering if someo