Error opening the database for the library "~/Pictures/Aperture Trial Library.aplibrary" error message

When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
Jim

Hello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie

Similar Messages

  • "There was an error opening the database for the library "~/Pictures/Apert"

    Hey everyone,
    There's already another discussion thread about this at the link below, but the problem was never actually resolved. http://discussions.apple.com/thread.jspa?threadID=2343014&tstart=0&messageID=116 67261#11667261
    So I stumbled across this problem where Aperture 3 will display the following error when opening the image library.
    There was an error opening the database for the library “~[path]/Aperture Library.aplibrary”.
    One user suggested navigating to the actual library, and ⌘⌥-clicking the library to open it with the Aperture Library First Aid dialog. This however, did not work for me. I still received the error messages upon ⌘⌥-clicking the library.
    Here's a little hack I discovered for those of you still struggling. It doesn't fix the problem (leaves quite a large dent remaining actually), but hopefully someone can cultivate what little I discovered.
    ⌥-click Aperture (not the library)
    You should get to the library selection dialog box. Create a new library (bottom right corner) and remember the location of the new library. Put a few random pictures in the new one.
    Close Aperture
    ⌃-click both the old and new libraries and "Show Package Contents."
    Open the folder "Database" in both libraries.
    Cross check the folders to see if the old library is missing files that are in the new library. If your old library is missing some files (mine was), drag the missing files from the new library to the old one.
    Close both folders.
    ⌘⌥-click the old library.
    NOW, I got the Aperture Library First Aid dialog.
    Rebuild the library (3rd option)
    Wait a while.
    Aperture should open up with a folder named "Recovered Folder." Within this folder will be a SINGLE project named "Recovered Project" with ALL the images from your old library. There may be a few albums there too, but mine were all empty so it didn't matter in my case. To my knowledge, I lost all the adjustments I performed too.
    This is as far as I got. I have much of my library backed up, so I only needed to copy the most recent photos into the backup. I am NOT reorganizing and re-editing pictures in this one!
    As Aperture is a photo-organizing and photo-editing software, I understand that this by no means fixes the problem, since you lose all organization and editing. But it enables one to at least view the images lost. Hopefully a more knowledgable hacker else can figure out how to fix this completely. Unfortunately, I simply don't have the time to continue messing with this.
    Good luck to anyone else having issues! I understand the frustration you must be facing, its freaky having years worth of images simply disappear! After this incident, I'm definitely going to configure Time Machine to perform more frequent backups, since my latest backup was already a couple weeks old.

    Hey All,
    To my horror I have a similar problem and your solution didn't seem to help. To be specific, I get the error:
    "There was an error opening the database for the library “~/Pictures/Aperture Library_2.aplibrary" Everytime I try to run Aperture. This happened because my Apple computer shut off completely (due to bad battery) while importing photos from a memory card.
    I've tried "option + command" while clicking the aperture application and that gave me the same error message without any other option except to quit the program. I tried "option + command" and clicked the library package but that didn't work either. I tried creating a new aperture library, opening it which I did successfully, and then switching to my main one but that didn't work.
    Does anyone know away to get it to work again and have the edits still there?
    I'm a professional photographer and have thousands of photos or so in the library so this is distressing. The master files for the photos are located on an external hard drive, but I'm not sure how to access them in aperture. Are all the edits on the photographs are in the external hard drive or the aperture library. Is there any other way to resolve this issue without losing the edits?
    Does apple have a support number I can call? Any help would be greatly appreciated!!

  • I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

    I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

    Are all three libraries under your account or are they in different accounts? Any other errros on the system?
    Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

  • Aperture (3.4.1) no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary." How can I solve this problem? Thanks

    I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
    How can I solve this problem?
    Thanks

    After a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
    Have you tried the Aperture Library First Aid Tools?
    Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
    Try "Repair Database", and if this does not help: "Rebuild Database"
    Regards
    Léonie

  • There was an error opening the database for the library "~/Pictures/Apertur

    There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
    What's up with this? Aperture showed this error a couple times before quitting when I tried to open it.

    I got the same error. Normally I would perform a Repair Database command by holding down Option-Command while launching Aperture, but that just gave me the same error without any options to repair the database.
    Instead, I had to follow these instructions in the Aperture user manual. The key is to locate the Aperture library file on your hard drive and then hold Option-Command while double-clicking the Aperture library file.
    Choose the REPAIR DATABASE option.
    -- excerpt from user manual --
    To repair or rebuild your Aperture library
    Close Aperture, if it’s open.
    Locate the Aperture library you want to fix, then hold down the Command and Option keys while double-clicking the Aperture library.
    The Aperture Library First Aid dialog appears.
    In the Aperture Library First Aid dialog, do one of the following:
    To repair the permissions of the files within your Aperture library: Select Repairing Permissions.
    This option should be used when Aperture can’t access some of the image files within the database or Aperture is unable to open the library itself. The Repairing Permissions option reviews each file in your Aperture library and sets the read and write access of each file where appropriate, allowing Aperture to access the files again.
    Note: This option does not relocate referenced images whose master image files are offline. For more information about reconnecting offline images, see Reconnecting Missing or Offline Referenced Images.
    To repair your Aperture library file: Select Repair Database.
    This is the first option you should use if you believe there is something wrong with the Aperture library other than image file access issues.
    To rebuild your database from scratch: Click Rebuild Database.
    This option should be used as your last measure as it can be time-consuming for large image libraries. If you have tried repairing your database, and the issues you are encountering with your Aperture library still persist, you should use the Rebuild Database option. Aperture examines the library’s entire database and rebuilds each component until it reconstitutes your original Aperture library.
    Depending on your selection, click Repair or Rebuild.
    Aperture either fixes file permissions within the library or repairs or rebuilds the library, and then opens the application workspace.

  • When I try to open my aperture library, I get the message "There was an error opening the database for the library "/Users/alyssabouma/Pictures/Aperture Library.aplibrary". help!

    When I try to open my Aperture Library, I get this message: "There was an error opening the database for the library “/Users/alyssabouma/Pictures/Aperture Library.aplibrary”.
    I have already uninstalled and reinstalled the library....Help!!

    lyssalou,
    what is your Aperture version and what is your MacOS X version?
    What happened, before this problem occurred? Did you import images, install software, move the Aperture library?
    I have already uninstalled and reinstalled the library....Help!!
    What do you mean by reinstalling the library? Did you reinstall Aperture?
    You might start the trouble shooting with using the Aperture Library First Aid Tools - repairing the permissions, repairing the library, and rebuilding, if necessary, see:
    Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
    Before rebuilding the library, make a backup of the Aperture Library, if you do not have one.
    Regards
    Léonie

  • When I try to open aperture (which has been working fine for months), I get this response: There was an error opening the database for the library "~/Pictures/Aperture Library.aplibrary". Please help!!

    When I try to open aperture (which has worked great for months), I get this response:
    There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
    Please help!! Thank you!! =)

    Sonny3300, your signature says "Aperture 2" - is that correct? Then you need this trouble shooting guide:
    Aperture 2: Troubleshooting Basics: http://support.apple.com/kb/HT2945
    What is your Operating system version and where is your library located? Have imported new images recently or changed the location of your library?
    Regards
    Léonie

  • When i try to open aperture, i get a box popup that says;  Warning-There was an error opening the database for the library "~/Pictures/Aperture Library.aplibrary".

    When i try to open aperture, i get a box popup that says; 
    Warning-There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
    Can anyone help? I cannot accesss aperture. this is the 1st time this has ever happened...
    thanks,

    Try running a repair on the library. Hold the command and option keys down while starting Aperture, this will open the repair window. Select Repair Library.
    See Aperture 3: Troubleshooting Basics
    If you still have problems post back

  • There was an error opening the database for the library "/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary".    what do I do now?

    There was an error opening the database for the library “/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary”.
    What do I do now.  I cant access the photos on the drive.  The only option is Quit?  what ??????????
    Please help ready to throw computer and drive out the window.  I have a deadline of next Tuesdaythe 11th.

    Start Aperture while holding down the option and command keys. You'll get a Photo Library First Aid dialog as below.
    Try Repair Database first. If that doesn't work, then redo the startup with option-command and try Rebuild Database. These repair processes can take a long time with a larger library.
    If all that fails, you can try creating a new library from scratch and then try importing the old library into the new. This sometimes can fix problems that can't be repaired the First Aid way.
    Also make sure the drive where the Aperture library is located is working properly. You can check it with Disk Utility app.

  • There was an error opening the database for the library "/Users/madis13/Pictures/Nikon Transfer3/Aperture Library.aplibrary".

    There was an error opening the database for the library “/Users/madis13/Pictures/Nikon Transfer3/Aperture Library.aplibrary”.
    What to do when it comes to such a notice?
    If I want to open the aperture program, followed by a message, and the only option is to quit, but the program is not avanegi

    chose import library.
    That might be the problem.
    If you want to import an image file in to an Aperture Library, you use the command
         File > Import > Files
    or
    File > Import > Folders as Projects.
    The command
      File > Import > Library
    is for importing whole iPhoto Libraries or Aperture Libraries.  Have you tried to import the Aperture Library into itself?
    However, the program did not open the catalog yet, and I did force quit.
    Do you mean, after you tried to "import as library"?
    Any success with the First Aid Tools as I suggested?
    Hold the key combination ⌥⌘ firmly down and double click your Aperture Library. Then select a repair option from the panel.
    Léonie

  • There was an error opening the database for the library "/Users/james/Pictures/Aperture Library.aplibrary".   what now?

    I was uploading 655 images from my Nikon D300S to aperture, all was going fine, went to make a coffee and came back to find Aperture had quit and this message was on the screen ––
    There was an error opening the database for the library “/Users/james/Pictures/Aperture Library.aplibrary”. 
    ––  when I now try to open aperture I always get the same message and it won't open.
    Any help would be greatly appreciated
    Aperture 3.4.5 and OSX 10.8.5

    Thanks William Lloyd and IeonieDF
    First opened First Aid by holding down alt and cmd while double clicking Aperture
    Tried Repairing Permissions and repairing Database in First Aid but neither worked –– so then did a 'Rebuild Database' and I'm back in action
    Thanks for taking an interest guys

  • Trying to open Aperture, but I get the message, "There was an error opening the database for the library "/Users/davewasson/Pictures/Aperture Library.aplibrary". - and it forces me to quit. What do I do?

    Trying to open Aperture, but I get the message, "There was an error opening the database for the library “/Users/davewasson/Pictures/Aperture Library.aplibrary”. - and it forces me to quit. What do I do?

    Dave-
    You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
    Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
    If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries.

  • I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library "~/Pictures/Aperture Library.aplibrary". The only option the is to quit. What is

    I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?

    Hi,
    not sure what the problem might be, but you can try the following:
    While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
    Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
    If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
    NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
    Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
    Good luck!
    Corrado

  • Help!!! There was an error opening the database for the library "/Users/davidwindebank/Pictures/Aperture Library.aplibrary"

    There was an error opening the database for the library “/Users/davidwindebank/Pictures/Aperture Library.aplibrary”

    Tell us more please - what is your Aperture version? What version of MAcOS X?
    What happenend directly before the problem occured? Did you update software? Install new software? Import new images?
    Did you move your Aperture library? Run a cleaning app for your mac?

  • There was an error opening the database for the library "/Users/stacia134/Pictures/Aperture Library.aplibrary".  Why am I getting this message and how do I correct it so that I can open Aperture????  any suggestions would be most appreciated

    There was an error opening the database for the library “/Users/stacia134/Pictures/Aperture Library.aplibrary”.  Why am I getting this message and how do I correct it so that I can open Aperture????  any suggestions would be most appreciated

    Then I'd check the system drive, if it has problems.
    To check your System drive boot into the Recovery Partition, see: OS X Lion: About Lion Recovery
    Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up.
    You will see a panel, where you can use Disk Utility to check your System Drive.

Maybe you are looking for