Error opening the file:8-Per diems upload

Hi Experts,
I am trying to upload the perdiems for the year 2013. I got the error "Error opening the file:8" while doing so. I tried uploading in both .txt as well .xls. Resulted with the same error. Kindly suggest to overome this.
Regards,
Anil Kumar P.

Hi Anil, I experienced the same issue when uploading the file. I resolved this by removing the " characters contained when pasting in the new values.

Similar Messages

  • Error opening the file message

    Trying to import any photo I get message "There was an error opening the file."  This is new.  What can this be about

    Please see if the file is a valid one (try opening the image in any other image editor/browser). What is the extension and source of the image?
    ~Surendra

  • I always get error opening the file

    I always get error opening the file Deprecated_ServerBehaviorsPanel_Support.zxp. My mistake I have Adobe Extension Manager DW says it requires 13 or later.
    the truth can not be ...
    Greetings juan manuel
    [spam removed by moderator]

    Do you have Extension Manager for CC?
    Adobe - Exchange : Download the Adobe Extension Manager
    You cannot use .ZXP extensions with any other extension manager.
    Nancy O.

  • I installed windows 7 recently and also Adobre reader XI, and now I cannot open any of my previously created pdfs. Every time I get the message: Error opening the file. Access denied. What is going on?

    Recently I had to install windows 7 in my notebook because XP doesn't have more support. Before installing I backed up all my files to my external HD. Now that I instaleed windows 7 and also installed Acrobat Reader XI, I just cannot open any of my pdf files created prior to installing windows 7.
    Looking for help online, I found the solution of security and giving me access as an administrator to all my files, but it still keeps the same...
    Can some one please help me out?? I really need to work on many of this files ASAP.
    Thank you all in advance for you attention,
    Best,
    Henrique

    Can you start Adobe Reader?

  • Error opening fla file.

    Hi,
    I am a relative newcomer to the world of Flash, so I apologize if this issue is a bit mindless for the veterans.
    I am working with Flash CS6 on a Macbook Pro and recently encountered a problem when trying to open a file. An error message pops up, saying 'there was an error opening the file...'. No further details are available.
    Looking at the file information, there is still data there, as the size is about 300MB.
    I've tried some amateur sleuthing online for a solution, mostly involving changing the .fla extentsion to .rar and repairing the file that way, but nothing I have tried has resolved the issue.
    Am I essentially out of luck, or is there a reliable solution for this kind of problem?
    Thanks for any help!
    Boots

    Wow, thanks for such a quick reply, kglad.
    I had actually previously zipped and unzipped the file and ended up with a folder full of stuff that I didn't know what to do with. Again, this is where my amateur understanding comes into play.
    In the unzipped folder, there are 'bin', 'library' and 'meta-inf' folders, as well as a 'DOMDocument.xml' file, a 'MobileSettings.xml' file, a 'PublishSettings.xml' file and finally a file called 'mimetype'.
    Should I be encouraged by this?
    I'm pretty clueless at this point about how I might proceed from here. I see that the 'library' folder contains all the sound files for the project (it's a soundboard), but is there a way to go from this point to recovering the project as it was before this issue came up? Or am I stuck with starting the project all over gain?
    Thanks again for the help!

  • Open dataset fails...says "error opening input file"

    Hi,
    I am trying to open a file in my BDC program and get the following error "error opening input file". Its a text file with continuous data. No delimiters and hence character count will be used to parse the data.
    I am using the following statement to open it..
    OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    but sy-subrc is set to 8 !!
    what could be the problem ??
    thanks

    This is pretty confusing !!I would explain to you my exact issue !!
    I have a program in which there is no GUI_UPLOAD call but just a direct open dataset statement !!
    This program runs fine for my collegue who has the file in a server (not the application server). She gives the full path name as
    servername\foldername\filename.
    I tried doing the same but as I did not have access to that server, it failed. So I received that file from her and stored it in my local system. So on program execution, i gave the path as c:\filename and I got the error message "Error opening the file"
    Find below some code extracts..
    PARAMETERS : p_sname TYPE d0100_mapn ,
                 p_file(136) TYPE c ,
    FORM open_file .
    *open file in textmode
      OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF  sy-subrc = 0.
        DO.
        Read the file data and tranfer to workarea to internal table
          READ DATASET p_file  INTO  x_legacy_rec.
    Please help in debugging this issue !!
    thanks

  • Help please I can not openening because: Error opening the document,  Acrobat can not open the file while printing another document

    Help, I ca not opening the file, beacause the mac says Error opening the document, Acrobat can not open the while printing another document

    Thank you very much for your replies Taggert_77 & swmtgoet_x :D
    Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
    Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
    This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
    swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
    The proper cmd is simply: java -jar soht-client-0.6.2.jar
    I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
    java -client -jar soht-client-0.6.2.jar soht.properties
    Thank you again...the mystery remains
    PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above).

  • US Per Diem Upload File

    Hi All,
    I have some questions regarding the u201CUS Per Diem upload from the Internetu201D with which I hope you can assist:
    1. Are you aware of any clients in the US that are currently using this functionality?
    2. What is the maintenance effort when using this functionality? (I.e. on a yearly basis what needs to happen when uploading the new rates as per the Government?)
    I have been trying to upload the file/s as per the SAP help instructions and have been unsuccessful to date. I believe some level of manual file manipulation is necessary in order to be able to complete the upload. Is this correct?
    If you have any additional information besides the SAP Help documentation please let me know?
    Thank you,
    Kind Regards,
    Anni_dt

    Hi Sally,
    Thank you very much for your answer. I have read this note before and I am sure that I am downloading the correct files from the Internet.
    However I am struggling to understand how the file with entries in the following format: (e_conusallhist2012.txt)
    "US" "CONUS" "C" "ALL PLACES NOT LISTED" "STANDARD CONUS RATE" 6 "" "" no 10/01/2011 12/31/2049 "01/01" "12/31" 77 46 41 26 5 "" "" 123
    "AL" "ALABAMA" "C" "ABBEVILLE" "HENRY COUNTY" 7 "AL" "HENRY COUNTY" no 10/01/2011 12/31/2049 "01/01" "12/31" 77 46 41 26 5 "" "" 123
    "AL" "ALABAMA" "C" "ABERFOIL" "BULLOCK COUNTY" 7 "AL" "BULLOCK COUNTY" no 10/01/2011 12/31/2049 "01/01" "12/31" 77 46 41 26 5 "" "" 123
    Is going to match up to my table entries in V_T706O:
    US AL/BI Birmingham
    US AL/GS Gulf Shores
    US AL/HU Huntsville etc.
    Do I need to manipulate the file into an Excel File format similar to the SAP Service Marketplace formats for Austria, Germany, Denmark etc and upload this file in transaction PRUL? I have done this before and it has worked but it seems like an unusual amount of effort/workaround to maintain the per diem entries in future.
    If anyone has any experience with this your assistance is much appreciated.
    Thank you,
    Anni

  • I just downloaded Digital Editions to use an e-book I purchased.   When I try to open the file it opens in Adobe Reader and I get an error message.  Please help

    please help  I downloaded Digital Editions to use e-book and when I got to open I get an error message

    It says file could not be opened because it was either not a supported type or it was damaged.  I have already had the file resent and in talking to the American Medical Association (purchased from their site)  it appears when I go to open the file it is in Adobe Reader and I do not see an option to move it to Adobe Digital Editions,
    Kathy Harlan
    <mailto:[email protected]> [email protected]
    Cell: 214-850-6427

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....

    I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
    <Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
    n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
    at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
    00000.DAT"
    at weblogic.store.io.file.Heap.open(Heap.java:166)
    at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
    at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
    at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
    at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
    ... 4 more
    Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
    at weblogic.store.io.file.Heap.open(Heap.java:164)
    ... 9 more
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
    at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
    at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
    at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
    at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
    at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
    ... 10 more
    i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
    Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....

    The root cause appears to be right in the stack trace:
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
    I don't think that this message necessarily means there is a file corruption.
    As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
    Tom

  • What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

    What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

    Kirby Krieger wrote:
    Hi Shane.  Not much in the way of thoughts - - but fwiw:
    How is the drive attached?
    Can you open large files on the drive with other programs?
    Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
    Can you reformat the drive and try again?
    Hi Kirby,
    I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
    Thanks,
    Shane

  • Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in

    Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file.  HELP!

    If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
    There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
    Gene

  • I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred.  Try saving to disk first and then opening the file".

    I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred.  Try saving to disk first and then opening the file".
    Then it shows as downloading failed.But if I click on it twice ,it opens up .
    this has started happening since last week.Before this ,it never happened.
    Please suggest what has gone wrong somewhere and how can I rectify it.

    Please install the following add-on to see if it helps.
    https://addons.mozilla.org/en-US/firefox/addon/pdfjs/

Maybe you are looking for

  • Goods Issue of consigmnent stock using MIGO

    Hi Guru's, I have configured stock determination group, rule header and iteam for consigment material.  I have also assigned Stk. Deter. Rule in the Applications but am still unable to issue from consignment stock in my warehouse.   I have reservatio

  • Is there a way to flip the pages of a document instead of scrolling?

    I have got my documents into pages but was hoping instead of scrolling from page to page I could somehow change a setting or preference to be able to flip pages like in iBook. Hope someone else has had this concern or request so that I can make this

  • Updates to Acrobat 8 Professional Cause Preferences to Reset

    For some time now, any time the software is updated all Preferences settings return to their default settings. Anybody know why this is happening?

  • N96 update - SOS

    Hi everybody. Sunny greetings from Portugal. I just tried to upgrade firmware on my N96 and in the middle of the update got the message that the operation failed. Even the Recover option failed. So I tried to turn on the phone and got a black screen.

  • My mails are disappearing

    My mails disappear from my iphone after a few days. Sometimes I don´t even had time to read them. They also go missing from my computer. Does anyone know if there is a mailsetting which does this? Can I fix it myself?