Error ORA-10980 while creating MV

SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 21 11:43:02 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
CREATE MATERIALIZED VIEW ebOrganizationStructure AS
SELECT DEPT.DeptStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
NULL DivCode,
NULL DivDesc,
NULL GrpCode,
NULL GrpDesc,
NULL SecCode,
NULL SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT
UNION
SELECT DivStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
NULL GrpCode,
NULL GrpDesc,
NULL SecCode,
NULL SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erOrgUnit_Orgunit OGU_OGU1
WHERE OGU_OGU1.OguEntId2 = DIV.EntId
AND OGU_OGU1.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU1.OguEntId1
AND DEPT.EntDomId = OGU_OGU1.OguEntDomId1
UNION
SELECT GRP.GrpStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
GRP.GrpShortName GrpCode,
GRP.GrpName GrpDesc,
NULL SecCode,
NULL SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erGroup GRP,
erOrgUnit_Orgunit OGU_OGU1,
erOrgUnit_Orgunit OGU_OGU2
WHERE OGU_OGU1.OguEntId2 = GRP.EntId
AND OGU_OGU1.OguEntDomId2 = GRP.EntDomId
AND DIV.EntId = OGU_OGU1.OguEntId1
AND DIV.EntDomId = OGU_OGU1.OguEntDomId1
AND OGU_OGU2.OguEntId2 = DIV.EntId
AND OGU_OGU2.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU2.OguEntId1
AND DEPT.EntDomId = OGU_OGU2.OguEntDomId1
UNION
SELECT SEC.SecStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
GRP.GrpShortName GrpCode,
GRP.GrpName GrpDesc,
SEC.SecShortName SecCode,
SEC.SecName SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erGroup GRP,
erSection SEC,
erOrgUnit_Orgunit OGU_OGU1,
erOrgUnit_Orgunit OGU_OGU2,
erOrgUnit_Orgunit OGU_OGU3
WHERE OGU_OGU1.OguEntId2 = SEC.EntId
AND OGU_OGU1.OguEntDomId2 = SEC.EntDomId
AND GRP.EntId = OGU_OGU1.OguEntId1
AND GRP.EntDomId = OGU_OGU1.OguEntDomId1
AND OGU_OGU2.OguEntId2 = GRP.EntId
AND OGU_OGU2.OguEntDomId2 = GRP.EntDomId
AND DIV.EntId = OGU_OGU2.OguEntId1
AND DIV.EntDomId = OGU_OGU2.OguEntDomId1
AND OGU_OGU3.OguEntId2 = DIV.EntId
AND OGU_OGU3.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU3.OguEntId1
AND DEPT.EntDomId = OGU_OGU3.OguEntDomId1
UNION
SELECT SSEC.SubSecStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
GRP.GrpShortName GrpCode,
GRP.GrpName GrpDesc,
SEC.SecShortName SecCode,
SEC.SecName SecDesc,
SSEC.SubSecShortName SSecCode,
SSEC.SubSecName SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erGroup GRP,
erSection SEC,
erSubSection SSEC,
erOrgUnit_Orgunit OGU_OGU1,
erOrgUnit_Orgunit OGU_OGU2,
erOrgUnit_Orgunit OGU_OGU3,
erOrgUnit_Orgunit OGU_OGU4
WHERE OGU_OGU1.OguEntId2 = SSEC.EntId
AND OGU_OGU1.OguEntDomId2 = SSEC.EntDomId
AND SEC.EntId = OGU_OGU1.OguEntId1
AND SEC.EntDomId = OGU_OGU1.OguEntDomId1
AND OGU_OGU2.OguEntId2 = SEC.EntId
AND OGU_OGU2.OguEntDomId2 = SEC.EntDomId
AND GRP.EntId = OGU_OGU2.OguEntId1
AND GRP.EntDomId = OGU_OGU2.OguEntDomId1
AND OGU_OGU3.OguEntId2 = GRP.EntId
AND OGU_OGU3.OguEntDomId2 = GRP.EntDomId
AND DIV.EntId = OGU_OGU3.OguEntId1
AND DIV.EntDomId = OGU_OGU3.OguEntDomId1
AND OGU_OGU4.OguEntId2 = DIV.EntId
AND OGU_OGU4.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU4.OguEntId1
AND DEPT.EntDomId = OGU_OGU4.OguEntDomId1
Trace file showing error ORA-10980. MV hangs forever and never compiles. If I execute the query it comes up with correct results.
Thanks
Rajesh

I've seen MVs on 10g to be a bit tempermental. What happens if you build the MV but defer population and populate it as a second step?

Similar Messages

  • Getting Error ORA-00604 While Creating View from front Ent

    Hello All,
    I am getting ORA-00604 while creating view from the front end. And some time I get Maximum cursor open, It is ok amy be I am opening cursors in while loop. While ORA-00604 is giving lots of truble to me. In help it said to contact Oracle service, I dont know how to do that. Help me.

    Please post your view definition including the complete error_message and also the relevant parts of your code with the while loop.

  • Error: ORA-02298 while creating a new app at DRM 11.1.2.3.300

    Hi All,
            There's something weird happening when I try to create a new DRM app at DRM Management Console. After provide all information about database connection and admin long on i am getting the following error during the repository creation :
    Creating Repository ...  Done.
    Creating Tables ...  Done.
    Creating Views ...  Done.
    Creating Stored Procedures ...  Done.
    Creating Indexes ...  Done.
    Creating Primary Keys ...  Done.
    Initializing schema with predefined data ...
    Database creation failed with this error: ORA-02298: cannot validate (EPM_DRM_DB.FK_CATUSER02) - parent keys not found
         It is a fresh install and I don't know why I am having this error.  Did someone had this issue too ? How to solve that ?
    Thanks in advance

    ...To whom it may concern.....
    This issue was related to privileges in database. I've generated the scripts and ran with system user and it worked.
    Case closed.

  • Error ora-12028 while creating a read-only snapshot

    Hi !
    I'm in trouble creating a read-only snapshot of a simple table.
    The Master table belongs to an ORACLE 7.3.4 database instance, while the snapshot site belongs to an ORACLE 8.1 database. The read-only snapshot should have a refresh type FAST, but while I'm running the CREATE SNAPSHOT statement in the snapshot site I receive the following message:
    "ORA-12028 snapshot type is not supported by master site string
    Cause: Pre-Oracle master sites are not able to support primary key or
    subquery snapshots that are able to perform a fast refresh.
    Action: Create a ROWID snapshot or use a master table from an Oracle8 site. "
    This message doesn't help me enough. Is there anyone who can give me an advice ?
    Thanks you all.
    Laura

    Well laura earlier version doesn't support snap shot based on primary key
    u should disable primary key constraint from master site
    and create snap shot on the basis of row id.
    for further detail mail me at [email protected]

  • Error ORA-02070:  while creating view - Help Needed.

    ISSUE:
    ~~~~~
    When i am creating the view for the below SQL script I am getting the error as
    ==>ORA-02070:DATABASE DOES NOT SUPPORT OPERATOR NLS_CHARSET_DECL_LEN in this context <==
    Sql script
    ~~~~~~~
    create or replace view test11 as
    WITH x AS
    (SELECT column_name,
    DECODE (column_id, 7,to_char(eff_to_dt,'MMDDRRRR'),
                                       8,active_flg,
                                       9,nm_long,
                                       10,nm_short,
                                       11,rplcmnt_bu_id,
                                       12,pc_cc_cd,
                                       13,tax_cd,
                                       14,bu_type_cd,
                                       15,ledger_cd) COL_VAL_NEW,
    '' COL_VAL_OLD,
                                       fre_id,
                                       bu_id,
    eff_from_dt,
    rec_eff_from_dt,
                                       rec_type
    FROM BUSINESS m, all_tab_columns u
    WHERE table_name = 'BUSINESS'
    AND column_name in ('EFF_TO_DT'
    ,'ACTIVE_FLG'
    ,'NM_LONG'
    ,'NM_SHORT'
    ,'RPLCMNT_BU_ID'
    ,'PC_CC_CD'
    ,'TAX_CD'
    ,'BU_TYPE_CD'
    ,'LEDGER_CD')
    AND rec_type ='A'
    ORDER BY rec_eff_from_dt
    y as
    (SELECT column_name,
    DECODE (column_id, 7,to_char(eff_to_dt,'MMDDRRRR'),
                                       8,active_flg,
                                       9,nm_long,
                                       10,nm_short,
                                       11,rplcmnt_bu_id,
                                       12,pc_cc_cd,
                                       13,tax_cd,
                                       14,bu_type_cd,
                                       15,ledger_cd) COL_VAL_NEW,
    '' COL_VAL_OLD,
                                       fre_id,
                                       bu_id,
    eff_from_dt,
    rec_eff_from_dt,
                                       rec_type
    FROM BUSINESS m, all_tab_columns u
    WHERE table_name = 'BUSINESS'
    AND column_name in ('EFF_TO_DT'
    ,'ACTIVE_FLG'
    ,'NM_LONG'
    ,'NM_SHORT'
    ,'RPLCMNT_BU_ID'
    ,'PC_CC_CD'
    ,'TAX_CD'
    ,'BU_TYPE_CD'
    ,'LEDGER_CD')
    AND rec_type <> 'A'
    ORDER BY rec_eff_from_dt
    a as (select y.column_name,
    y.col_val_new,
    x.col_val_new col_val_old,
    y.fre_id,
    y.bu_id,
    y.eff_from_dt,
    min(y.rec_eff_from_dt),
    y.rec_type
    from y, x
    where (y.fre_id = x.fre_id and y.bu_id = x.bu_id and y.eff_from_dt = x.eff_from_dt and y.column_name = x.column_name
    and nvl(y.col_val_new,'^') <> nvl(x.col_val_new,'~') and y.rec_type ='C')
    group by y.column_name,
    y.col_val_new,
    x.col_val_new,
    y.fre_id,
    y.bu_id,
    y.eff_from_dt,
    y.rec_type)
    select * from a
    union all
    select y.column_name,
    y.col_val_new,
    x.col_val_new,
    y.fre_id,
    y.bu_id,
    y.eff_from_dt,
    min(y.rec_eff_from_dt),
    y.rec_type
    from y, x
    where (y.fre_id = x.fre_id and y.bu_id = x.bu_id and y.eff_from_dt = x.eff_from_dt and y.column_name = x.column_name
    and y.col_val_new = x.col_val_new and y.rec_type ='D')
    group by y.column_name,
    y.col_val_new,
    x.col_val_new,
    y.fre_id,
    y.bu_id,
    y.eff_from_dt,
    y.rec_type
    union all
    SELECT column_name,
    DECODE (column_id, 7,to_char(eff_to_dt,'MMDDRRRR'),
                                       8,active_flg,
                                       9,nm_long,
                                       10,nm_short,
                                       11,rplcmnt_bu_id,
                                       12,pc_cc_cd,
                                       13,tax_cd,
                                       14,bu_type_cd,
                                       15,ledger_cd) COL_VAL_NEW,
    '' COL_VAL_OLD,
                                       fre_id,
                                       bu_id,
    eff_from_dt,
    rec_eff_from_dt,
                                       rec_type
    FROM BUSINESS m, all_tab_columns u
    WHERE table_name = 'BUSINESS'
    AND column_name in ('EFF_TO_DT'
    ,'ACTIVE_FLG'
    ,'NM_LONG'
    ,'NM_SHORT'
    ,'RPLCMNT_BU_ID'
    ,'PC_CC_CD'
    ,'TAX_CD'
    ,'BU_TYPE_CD'
    ,'LEDGER_CD')
    AND rec_type ='A'
    The sql script is nothing but to compare the record to get the attribute level changes.
    Please help me out why the error is being caused.
    Thanks in advance.

    Is one of the used table/view referencing a non-Oracle database with a database link ?
    ORA-02070: database [i]stringstring does not support string in this context
    Cause: The remote database does not support the named capability in the context in which it is used.
    Action: Simplify the SQL statement.

  • Error ORA-02375 while trying to export/import JTF.JTF_PF_REPOSITORY table

    We have already created an SR, In the mean time, trying to see whether anyone else has come across this issue.  Thanks.
    On : 11.2.0.3 version, Data Pump Import
    Error ORA-02375 while trying to import JTF.JTF_PF_REPOSITORY table
    We are getting the below error while performing the full db
    import.
    ORA-02375: conversion error loading table
    "JTF"."JTF_PF_REPOSITORY" partition "EBIZ"
    ORA-22337: the type of accessed
    object has been evolved
    ORA-02372: data for row: SYS_NC00040$ :
    0X'8801FE000004AD0313FFFF0009198401190A434F4E4E454354'
    This issue is
    stopping our upgrade of database from 10.2.0.4 to 11.2.0.3. This is very
    critical for us to be resolved.

    Hi,
    seems this is Character set issue fo source and Target DB check this doc:Unable to Export Table WF_ITEM_ATTRIBUTE_VALUES due to errors ORA-02374, ORA-22337, and ORA-02372 (Doc ID 1522761.1)
    HTH

  • Keychain error -25299 occurred while creating a System Keychain entry for t

    Keychain error -25299 occurred while creating a System Keychain entry for the username “Angela Rosario” and URL “afp://Angela%[email protected]/Data”.
    I keep getting the error above every time I try to set up my time capsule
    Could use some help?
    Mahalo

    Same here.

  • Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts.  Pleas advise as Blurb has said that it's a LR issue.

    Are you behind a firewall or double NAT??
    What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
    It is plugged in of course isn't it.. no nasty join wireless anywhere??
    The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

  • Accounts determination error is coming while create billing.

    Hi Experts,
    Accounts determination error is coming while create billing for Account Assignment Group A4 . In some cases only this error is appearing . I m a ABAPer I got this case and I  m debugging the code  . Can anyone  suggest me what all the things i need to check to know the root cause . This error is coming very  rarely but I want to find the reasons.  I saw some of scn post bt it was not clear .
    Please suggest briefly what w'd be the probable cause of this error and how to correct it.
    Thanks in advance

    Hi Dharmkrit,
    In one of your earlier posts, you have mentioned that you have assigned G/L accounts by selecting table 1. This is probably where you might be going wrong.
    Please follow the below steps to cross check your entries and you should hopefully have a solution.
    (1) First of all, start from the account determination procedure and check which procedure is assigned to the billing type.
    (2) Check the account determination type that is maintained in the procedure.
    (3) Check which access sequence assigned in that condition type
    (4) Check which table/tables have been maintained in the access sequence
    * In most probability, you would have maintained a different table in the access sequence while you are trying to assign your G/L accounts to some other table
    * Also, since you say that this error is only for a particular account determination type, check if you have maintained the correct combination of application/chart of account/Customer account assignment group/material account assignment group/G/L account in the correct table. However, this combination of fields depends on the table that you have used in the condition technique.
    I suggest that you write your entries down while checking the flow. This will give you a clear picture if a connection is missing somewhere in the condition technique.
    The customer/material account assignment groups are just keys (two digit codes) and their determination has nothing to do with Z1/Z2/A1 or any other code that you have defined in the system. The main determination is purely based on the condition technique and how correctly you have maintained the connections between the tables, access sequences, types and procedures. Just recheck these entries and you should be able to resolve the issue.
    Hope this helps
    Regards,
    Sumita Mittra

  • Error ORA-01422 while compressing a cube

    Hello,
    I am trying to compress the initial balnce of the European Inventory KPI  (KPINVMOEU) cube after reloading it and I encountered the oracle error-01422 which says:
    system error:error-01422:exact fetch returns more than requested
    system error:CONDENSE_FACTTABLE-5-ERROR-01422
    Has anyone dealt with this error before? Any input is appreciated.
    Thanks in advance,
    madhu

    Madhu,
        can you please look into these notes: 485766 and 385660.
    at the same time look into these links which is for similar problem.
    ERROR: System error: CONDENSE_FACTTABLE-5- ERROR:12805
    Error during compress 0IC_C03
    error ORA-01422 while compressing a cube
    Re: Cube compression failing
    All the best.
    Regards,
    Nagesh Ganisetti.

  • HT201514 I keep getting this message "Unable to complete back up an error has occurred while creating back up folder" Why is this happening and is it time to purchase a new tim machine?

    I keep getting this message “Unable to complete back up an error has occurred while creating back up folder” Why is this happening and is it time to purchase a new tim machine?

    Check out the Apple Support Communities Time Machine expert Pondini's troubleshooting article on this exact topic. Hopefully, it will help.

  • Facing error- ORA-23324: while running DBMS_JOB.run(job#)

    Hi,
    I am a new comer to this forum. I'm facing the follwing error
    while running a push job in multimaster replication env. Though
    able to delete the pending transactions from Deftran relating to
    two groups which i'm going to resync.
    ORA-23324: error ORA-06512: at line , while creating deferror
    entry at "DB.WORLD" with error 100
    ORA-06512: at "SYS.DBMS_DEFER_SYS", line 1425
    ORA-06512: at "SYS.DBMS_DEFER_SYS", line 1488
    ORA-06512: at line 1
    any help is appreciated.
    thanks
    Hsingh

    I apologize if you already solved this.. but see Metalink ID 790221.1
    +*<Moderator Edit - deleted contents of MOS Doc - pl do NOT post such content - it is a violation of your Support agreement>*+                                                                                                                                                                                                                                                                                                                                                                                                               

  • Getting ORA-32700 while creating database

    I am getting following error when creating the database :
    ORA-32700 error occurred in DIAG Group Service
    The error description is as follows :
    Cause: An unexpected error occurred while performing a DIAG Group Service operation.
    Action: Verify that the DIAG process is still active. Also, check the Oracle DIAG trace files for errors.
    The setup is as follows :
    Database : Oracle 9i Rel 2.
    OS : IBM AIX 4.3.3
    We are trying to create the database from sqlplus/dbca. It seems that in the database creation process it is throwing the error while it is trying to create the control files.
    listener.ora :
    LSNR_TSEDMDB2 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
    TNSNAMES.ORA
    LISTENER_TSEDMDB2 =
    (ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
    We have IBM HACMP Cluster setup on 3 machines. This machine (prcsmbk1) on which I am getting the error while creating the database is part of that HACMP cluster. While installing the Oracle database software also it gave me a list of the 3 machines which are in HACMP cluster. We are not planning to setup RAC, but still it seems like while creating the database control files Oracle is trying to perform some group service operation.
    Alert log :
    Sat Jan 3 03:31:18 2004
    Starting ORACLE instance (normal)
    Sat Jan 3 03:31:18 2004
    Global Enqueue Service Resources = 64, pool = 4
    Sat Jan 3 03:31:18 2004
    Global Enqueue Service Enqueues = 128
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    GES IPC: Receivers 1 Senders 1
    GES IPC: Buffers Receive 1000 Send 530 Reserve 300
    GES IPC: Msg Size Regular 432 Batch 2048
    SCN scheme 3
    Using log_archive_dest parameter default value
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up ORACLE RDBMS Version: 9.2.0.4.0.
    System parameters with non-default values:
    processes = 150
    timed_statistics = TRUE
    shared_pool_size = 117440512
    large_pool_size = 16777216
    java_pool_size = 117440512
    control_files = /u01/app/oracle/oradata/TSEDMDB2/control01.ctl
    db_block_size = 8192
    db_cache_size = 33554432
    compatible = 9.2.0.0.0
    db_file_multiblock_read_count= 16
    fast_start_mttr_target = 300
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    undo_retention = 10800
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    instance_name = TSEDMDB2
    dispatchers = (PROTOCOL=TCP) (SERVICE=TSEDMDB2XDB)
    local_listener = LISTENER_TSEDMDB2
    job_queue_processes = 10
    hash_join_enabled = TRUE
    background_dump_dest = /u01/app/oracle/admin/TSEDMDB2/bdump
    user_dump_dest = /u01/app/oracle/admin/TSEDMDB2/udump
    core_dump_dest = /u01/app/oracle/admin/TSEDMDB2/cdump
    sort_area_size = 524288
    db_name = TSEDMDB2
    open_cursors = 300
    star_transformation_enabled= FALSE
    query_rewrite_enabled = FALSE
    pga_aggregate_target = 25165824
    aq_tm_processes = 1
    Sat Jan 3 03:31:19 2004
    clUster interconnect IPC version:Oracle UDP/IP
    IPC Vendor 1 proto 2 Version 1.0
    PMON started with pid=2
    DIAG started with pid=3
    LMON started with pid=4
    LMD0 started with pid=5
    DBW0 started with pid=6
    LGWR started with pid=7
    CKPT started with pid=8
    SMON started with pid=9
    RECO started with pid=10
    CJQ0 started with pid=11
    QMN0 started with pid=12
    Sat Jan 3 03:31:24 2004
    starting up 1 shared server(s) ...
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    Sat Jan 3 03:31:25 2004
    Create controlfile reuse set database TSEDMDB2
    MAXINSTANCES 1
    MAXLOGHISTORY 1
    MAXLOGFILES 50
    MAXLOGMEMBERS 5
    MAXDATAFILES 100
    Datafile
    '/u01/app/oracle/oradata/TSEDMDB2/cwmlite01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/drsys01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/example01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/indx01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/odm01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/system01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/tools01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/undotbs01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/users01.dbf' ,
    '/u01/app/oracle/oradata/TSEDMDB2/xdb01.dbf'
    LOGFILE GROUP 1 ('/u01/app/oracle/oradata/TSEDMDB2/redo01.log') SIZE 102400K,
    GROUP 2 ('/u01/app/oracle/oradata/TSEDMDB2/redo02.log') SIZE 102400K,
    GROUP 3 ('/u01/app/oracle/oradata/TSEDMDB2/redo03.log') SIZE 102400K RESETLOGS
    Sat Jan 3 03:31:25 2004
    ORA-1503 signalled during: Create controlfile reuse set database TSEDMDB2
    MAX...
    Sat Jan 3 03:32:28 2004
    Restarting dead background process QMN0
    QMN0 started with pid=15
    Sat Jan 3 03:32:28 2004
    Shutting down instance (abort)
    License high water mark = 3
    Instance terminated by USER, pid = 47128
    Diag trace file :
    /u01/app/oracle/admin/TSEDMDB2/bdump/tsedmdb2_diag_49754.trc
    Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
    With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.4.0 - Production
    ORACLE_HOME = /u01/app/oracle/product/9.2.0
    System name: AIX
    Node name: prcsmbk1
    Release: 3
    Version: 4
    Machine: 0002599F4C00
    Instance name: TSEDMDB2
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    49754
    Number of Serviceable Networks detected is less than 2
    Disabling Transparent Network Failover Feature.
    *** SESSION ID:(2.1) 2004-01-03 03:31:19.886
    kjzcprt:rcv port created
    kjzmreg2: slos err[1 19 [HA_GS_CONNECT_FAILED] sskgxn_gs_in 19]
    [kjzmreg2]: Error [category=1] is encountered
    Node monitor problem:[32700][kjzmreg2]
    Membership is lost in DIAG group
    Any help is appreciated. Thanks in advance.

    Thanks a lot for all your responses. We found the issue. The issue was that when we installed 9i we selected Enterprise option which installed RAC also. And after that when we were trying to create database Oracle was thinking that we are trying to create database in RAC env. and most likely it was trying to create/sync the control files on all the machines in the cluster.
    The sequence of events were as below :
    1. We have 8i installed on this machine
    2. We installed 9i (9.2.0.1.0) using the same ORACLE_BASE but different ORACLE_HOME. We didn't select "Custom Install". We selected "Enterprise install" option
    3. We installed new installer (2.2.0.18.0 ) and then 9i patch (9.2.0.4.0)
    4. While creating the database (manually & through DBCA) we were getting ORA-32700
    5. We tried to uninstall (using OUI 2.2.0.18.0) 9i (including the patch) completely but it never succeeded. We noticed that when we started uninstall it did show progress for about 20 minutes and after that it didn't show any progress. It was not taking any CPU cycles and It was not writing to the log file either. Basically we were never able to cleanly uninstall 9i. We tried almost 2 to 3 times.
    6. Then we installed 9i using a new ORACLE_BASE and this time we selected "Custom Install" and we did not install RAC. This is successful
    7. Then we installed new installer (2.2.0.18.0 ) and we tried to install the 9i patch (9.2.0.4.0) using this new installer but it never succeeded. Then we tried to install the 9i patch (9.2.0.4.0) using the old installer version (2.2.0.11.0) and it was also successful.
    8. Then we tried to create database using DBCA and it was successful and then we dropped the database which was created using DBCA and then we created it manually through SQLPLUS and this was fine too.
    So basically what we learned from this exercise is that if we are installing 9i on a machine which is part of a cluster and if we don't plan to setup RAC then we shouldn't install RAC and we should do a custom install. I wish there was a option in create database stmt to tell Oracle that though we are creating database on a machine which is part of a cluster environment but we don't intend to setup RAC.
    And other thing which is still a mystery is that why does the uninstall never completes successfully. One question on this : We were using the installer version 2.2.0.18.0 to uninstall the 9i software. Do we need to use the older version (2.2.0.11.0) of the OUI?

  • Internal Error ORA-0600 when creating multiple consumer queue table

    Hi,
    I tried to create a multiple consumer queue table with the following statements:
    exec DBMS_AQADM.GRANT_TYPE_ACCESS ('system');
    create type Change_History_Trigger_Data as object(Col1 VARCHAR2(255), Col2 VARCHAR2(128), Col3 VARCHAR2(255), Col4 TIMESTAMP, Col5 VARCHAR2(64), Col6 VARCHAR2(64), Col7 NUMBER(8));
    Works fine till this stage. But the following statement produces an ORA-0600 internal error message.
    EXEC DBMS_AQADM.CREATE_QUEUE_TABLE ('change_history_queue_tbl','Change_History_Trigger_Data', 'tablespace my_tblspace','ENQ_TIME',TRUE,DBMS_AQADM.TRANSACTIONAL);
    ERROR at line 1:
    ORA-00600: internal error code, arguments: [kcbgtcr_4], [14392], [0], [1], [], [], [], []
    ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2224
    ORA-06512: at "SYS.DBMS_AQADM", line 58
    ORA-06512: at line 1
    I tried creating the same queue table with Multiple consumer = FALSE, and it works fine. But not with multiple consumer = TRUE
    I'm running on Oracle9i Enterprise Edition Release 9.2.0.6.0
    Any possible solutions?

    Problem solved.
    The queue name was too long. Found a post with the same problem.
    Re: Create Queue Table ORA-00600 while dbms_aqadm.create_queue_table
    thanks anyway

  • Error: ora-12560 while installing OEM 10g

    I have oracle db 10.1.0.3 and i was trying to install OEM 10.1.0.3 everything went fine until i had that error error messagne while creating the clone database instance. ora-12560: TNS protocol adapter error... anyone can help?

    Needs more info. Are you able to work/connect on your primary db thrugh OEM ?
    Regards,
    http://askyogesh.com

Maybe you are looking for