Error ora-24324 during installtion

Hi All,
I cannot install Oracle 10g rel. 2 on Win Server 2003 SB, because when the the configuration assistant installer try to copy the db files, it stop with the following errors:
ORA-24324 Service Handle not Initialized
ORA-24323 Value not authorized
ORA-28547 Connection to Server failed probable Oracle NET ADMIN error
I have uninstalled, deleted the entry in the registers (oracle and services), rebooted and reinstalled, But with the same errors.
I hope in Your help.
Best Regards
Gaetano

Hi,
are you uninstall properly .... mean how you uninstall ORACLE software on your system thourgh OUI or manully.
and also check any registry value in system registry (start >> run >> regedit).
and try to again install ( after reboot your system)
regards
Taj

Similar Messages

Error ORA-0942 during navigation

I am getting an error an table not found error (ORA-00942) when navigating through Raptor.
I am only moving from one pane to another but I get the error everytime the pane refreshes.
I don't know what table it is looking for, so any help would be appreciated.
Ian

I experienced the same problem after attempting to display the defintion for a Object Type. I am connecting to a 9.2.0.5 instances and the objects are another users.
It would be really nice if there was a way to run on debug output that would record SQL being used by Raptor itself. I can do this now by using session tracing, but then I have to go find trace file, process it, etc.
Presuming Raptor is using Log4J or something similar, it seems like turning on the appropriate logging and sending it to a file or window would be fairly easy and most useful.

Error ORA-00600 during dropping user

i'm trying to drop a user with:
drop user myuser cascade
but i receive this error:
*ORA-00600: internal error code, arguments: [kzdukl3], [24], [], [], [],[], [], []*
do you know what kind of error is it?

Hi..
Refer to METALINK Doc ID: Note:435230.1.It says this error occurs if validation fails for any objects that need to be dropped belonging to this
user.
Regards,
Anand

How to desactivate error ORA-39181 during expdp schema export.

Hi all,
Is it possible to NOT have ORA-39181 in log file during expdp export?
In my case, I have a lot of ORA-39181 errors, and these errors can easily mask other errors...
Tahnsk for your help,
Regards,
Elodie

From oerr:
$ oerr ora 39181
39181, 0000, "Only partial table data may be exported due to fine grain access control on %s"
// *Cause: An unprivileged user has tried to export a table that has fine
//          grain access control. The table owner is subjected to access
//          control and may not be able to export all rows in the table.
//          Only the rows that can be seen by that user will be exported. In
//          order to preserve integrity of the table, the user importing the
//          table should have enough privilege to recreate the table with the
//          security policies at import time.
// *Action: It is strongly recommended that the database administrator handle
//          exporting of this table.HTH
Amardeep Sidhu
http://amardeepsidhu.com/blog

Error ORA-12560 during creation database on oracle 11.2.0.1

Hi,
I'm just installed 11g r2 (11.2.0.1) on system Sun Solaris 10.
After install i would create a db with dbca, but at the end of the configuraton, when the creation begin, apperars ORA-12560 error.
Any idea?
tks
max

I set the ORACLE_HOSTNAME environment variable end the result of lsnctrl status now is:
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 25-JAN-2010 16:16:02
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.102.0.3)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 25-JAN-2010 15:57:54
Uptime 0 days 0 hr. 18 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/product/11.2.0.1/db/network/admin/listener.ora
Listener Log File /opt/oracle/diag/tnslsnr/nemo-as-col/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.102.0.3)(PORT=1521)))
The listener supports no services
The command completed successfully
The result of hostname command is nemo (tha machine name).
After I retry with dbca with the same result :(
max

Error - ORA-01578 during archiving testing.

Dear Gurus,
Please note that we are getting the block corrupt error on continuous DB blocks during execution. Your input is required to figure out the issue and your kind help is needed to resolve this issue.
Please see below link for error.
[http://i47.tinypic.com/r9hr8i.jpg]
Thanks
Malik Adeel Imtiaz

Hi Malik,
During both the operation you may face some slowness on DB , dbverify you can run on backup files also to avoid scanning online dbfiles
dbms repair will fixed the corrupt block by removing them hence there could be loss of data
DBMS_REPAIR:
http://docs.oracle.com/cd/B19306_01/server.102/b14231/repair.htm
DB Verify:
http://docs.oracle.com/cd/B13789_01/server.101/b10825/dbverify.htm
Thanks,
Ajay More
http://moreajays.blogspot.com

Database10g Rel2 Intallation Error i.e. ORA - 24324

Dear All,
I am trying to install Oracle 10g rel. 2 on Windows XP, But when the the configuration assistant installer tries to copy the db files, it stop with the following errors:
ORA-24324 Service Handle not Initialized
ORA-24323 Value not authorized
ORA-28547 Connection to Server failed probable Oracle NET ADMIN error
I have uninstalled, deleted the entry in the registers (oracle and services), rebooted and reinstalled, But again the same errors are coming.
Earlier on same PC i succeessfully installed oracle database 10g release 2 (at that time i had only one drive i.e. C, but now i have 3 drives of 30 GB Each). But after formating my drive when now i am going to install the same it gives an error which is described above.
Please help me as its very urgent to sort that issue.
Best Regards,
Saeed

Are you on a XP Pro edition ?
Did you use any remote connection tool ?
ORA-28547: connection to server failed, probable Oracle Net admin error
Cause: A failure occurred during initialization of a network connection from a client process to the Oracle server: The connection was completed but a disconnect occurred while trying to perform protocol-specific initialization, usually due to use of different network protocols by opposite sides of the connection. This usually is caused by incorrect Oracle Net administrative setup for database links or external procedure calls. The most frequent specific causes are: -- The connection uses a connect string which refers to a Heterogeneous Services agent instead of an Oracle server. -- The connection uses a connect string which includes an (HS=) specification.
Action: Check Oracle Net administration in the following ways: -- When using TNSNAMES.ORA or an Oracle Names server, make sure that the client connection to the ORACLE server uses the correct service name or SID. -- Check LISTENER.ORA on the connection end point"s host machine to assure that this service name or SID refers to the correct server. -- Confirm in TNSNAMES.ORA or the equivalent service definition that the connect string does NOT contain (HS=).
Nicolas.

ORA-24324 ORA-24323 ORA-28547 errors when installing dbca on W2K

I cannot install correctly the Oracle 10g Rel 2 on my Win2K platform because when the database configuration assistant installer starts it stops while copying database files with the following errors :
ORA-24324 Service Handle not Initialized
ORA-24323 Value not authorized
ORA-28547 Connection to Server failed probable Oracle NET ADMIN error
With DHCP enabled on my box, I workarounded problem with installation guide solution installing the Microsoft Loopback Adapter and instanciating the hosts files.
The install was succesfully started but it keeps stoping with the above errors and the service seems to be up on port 1521.
Any clues?
Thanks in advance

Hi
There are zillion programs in the market that I don't know about and that might use 1521 port. Anyways, you may want to delete the registry entries before begining the new install if they are not already deleted.
goto Start->Run->REGEDIT
HKEY_LOCAL_MACHINE->SOFTWARE->ORACLE and delete it.
Also
HKEY_LOCAL_MACHINE->SYSTEM->CONTROLSETxx->SERVICES and remove any service that has Oracle in it.
Additionally I would also delete the folder of Oracle_home and wipe out entries from c:\program files\oracle.
Last but not the least, remove environmental variables with Oracle entries.
eboot your machine.
If you are using a firewall or AV then it is possible that this port is being blocked for use. Try to disable the firewall and AV atleast during installation.
Hope it works for you.
Rgds
Adnan
By the way, did you find any thing from netstat?

Error ORA-35185 when installing BI samples 10.1.2.1.0.

I receiving an error ORA-35185 during common schema installation for Business Intelligence samples 10.1.2.1.0.
Operating system: Windows 2003 SP1 x64
Database: 10g Ent.Ed. 10.2.0.1.0 x64 (same with 10g EE 10.1.0.4.)
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Creating utils AW...
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
The current directory is EIFDIR.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Creating debug AW...
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Creating shaw AW...
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Checking the Analytic Workspace version...
PL/SQL procedure successfully completed.
The Analytic Workspace version is: 10.2.0.1.0
Migrating CS_OLAP.SHAW...
ERROR: (ORA-35186) The word TO must be followed by an argument such as a
dimension value.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
AW creation complete
PL/SQL procedure successfully completed.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64
bit Production
With the Partitioning, OLAP and Data Mining options
Modifying user privileges on CS_OLAP
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Dec 12 16:19:23 2005
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Any help?
Sergejs

To answer my own question, while computer is turned off, (after taking anti-static precautions) plug power to sata drive.
Connect sata data cable to M/board, do not connect sata data cable to drive.
Enable sata 1 & 2 in bios, boot to windows.
Drivers are installed for device.
Then carefully plug sata data cable into sata drive.
Windows detects new hardware.
Enter Disk Management & partition/format to your hearts content.
Thanks to those who had a look at my post. Hope this helps someone else.

ORA-24324

hi
when i m going to save any records the oracle gave me these two errors ORA-24324 and FRM-40655.
i m using the oracle 10 xe and application server 10g rel2 and forms 10 g rel2 .
regards
Adil.

first were you able to connect to database through sqlplus ?
if YES :-
now check if your alert log shows some dead locks ?
if error is reproducible then
take sql net trace of your client.
TRACE_UNIQUE_CLIENT = ON
TRACE_LEVEL_CLIENT = 16
TRACE_DIRECTORY_CLIENT = C:\temp
TRACE_FILE_CLIENT = SQLNetTrace
TRACE_TIMESTAMP_CLIENT = ON

ORA-29540 during full database export

Hi,
Anyone encounter this error ORA-29540 during full database export. Have check out the web site for solution. Have check that the init file compatible is set to 8.1.0, the public synonym dba_java is been removed. However after the above remedies, the problem still occured. My database version is 8.1.5. Please let me know if there is other solution to this problem.
Thank You ...
regards,
lbs

Hi,
Thanks...Any idea how to check whether the installation for the initjvm.sql is successful. cos I just took over from the previous DBA and he too have no idea...
Thank You..

ORA-24324 ORA-01041

Oracle 9i
Errors: ORA-24324 AND ORA-01041 database always shutdown, never start....what can I do?
help me please!!!
tks

Errors: ORA-24324 AND ORA-01041 database always
shutdown, never start....what can I do?
help me please!!!
tks
What did you find when you looked up the error messages? I found this:
ORA-01041: internal error. hostdef extension doesn"t exist
Cause: Pointer to hstdef extension in hstdef is null.
Action: Report as a bug
i am able to mount the database but when i am running the script to create database this error is occuring to me

Can't Install 11g Db, Error ORA 28547/24324/01041

hi,
I was trying to install db 11g and the installation stopped half way through with 3 errors.
1.ORA 24324: SERVICE HANDLE NOT IDENTIFIED
2.ORA 01041: INTERNAL ERROR, HOSTDEF EXTERIOR DOES'NT EXIST
3.ORA 28547: CONNECTION TO SERVER FAILED, PROABLY NET ADMIN ERROR.
I have just trained on oracle application developper and very new to installing a personal database.
My machine is a pentium duo core 1.7, 2gb ram and 120 hdd and my OS is XP professional sp2. I connect through this machine
through my office lan to oracle 9i db in my company server.
I have tried to set up a 11i DB Personal and 10g developer suite on the same machine.
I could figured out the 1st error ORA-01041 and understand that the Environment variables have to be changed before I try to
reinstall 11g.
As I checked up the variable from System>advanced>environment variables it is showing a very long string which is
(C:\app\ravid\product\11.1.0\db_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program
Files\Intel\Wireless\Bin\;C:\ORANT\BIN;)
After looking this up in the c:\oracle folder trace the string only uptil 'bin'.
I have DEVELOPER 2000 NT with Forms runtime and Graphics runtime already on the machine however i did not see any path in the
system environment variable for this, or could it be that the string i mentioned above has that included too..one thing i know for
sure is there was no oracle home before i tried to install the 11g db.
Could someone also help me out with the 1st and 3rd errors as i don't know what they mean?
Will really appreciate if you can help me through this.
Thanks in advance for your time and advice.

Re: Can't Install 11g Db, Error ORA 28547/24324/01041

Error ORA-01460 warning ORA-01461 during running a mapping with parameters

Oracle 10g release2(10.2.0.1.0), OWB 10.2.0.1.31, Workflow server 2.6.4
I have a simple process flow ( start -> mapping -> end).
The mapping consists of 4 input groups(3 ordinary tables<INGRP1, INGRP2, INGRP3> and 1 mapping input parameter operator <INGRP4>), a joiner, a filter, an expression operator and 1 output group.
I want to use two variables in join condition, so I bound two mapping input parameters(<INGRP4.SRC_SYS_CDE> and <INGRP4.ADMIN_ORG_NUM>) with two parameters of the process flow's start activity.
Those two mapping input parameters are of type char, one is 4-char long and the other is 2-char long. So I set both of the two parameters of the start activity as String, one as 08, another as 7504.
My join condition is:
INGRP1.ORGIDT = INGRP2.SOURCEORGANIZATIONNO AND
INGRP2.SOURCESYSTEMCODE = INGRP4.SRC_SYS_CDE AND
INGRP2.ADMINORGANIZATIONNO = INGRP4.ADMIN_ORG_NUM AND
INGRP1.CURCDE = INGRP3.NUM(+)
There are no errors and warnings in validation, generation and deployment process, but when I run the process flow, it always finishes blankly(zero insert) with no error and warning messages. It should insert more than 20,000 rows.
When I run the mapping and set the parameters 08 and 7504 at the parameter prompt, then start, the following error and warning occurs.
Error ORA-01460: unimplemented or unreasonable conversion requested
Warning ORA-01461: can bind a LONG value only for insert into a LONG column
So what's the problem? How can I fix it?

The problem was mapping input parameter type.
VARCHAR2-type mapping input parameter works with String-type PF parameter. But CHAR-type won't.

Error ORA-39125 and ORA-04063 during export for transportable tablespace

I'm using the Oracle Enterprise Manager (browser is IE) to create a tablespace transport file. Maintenance...Transport Tablespaces uses the wizard to walk me through each step. The job gets created and submitted.
The 'Prepare' and 'Convert Datafile(s)' job steps complete successfully. The Export step fails with the following error. Can anyone shed some light on this for me?
Thank you in advance!
=======================================================
Output Log
Export: Release 10.2.0.2.0 - Production on Sunday, 03 September, 2006 19:31:34
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Username:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Starting "SYS"."GENERATETTS000024": SYS/******** AS SYSDBA dumpfile=EXPDAT_GENERATETTS000024.DMP directory=EM_TTS_DIR_OBJECT transport_tablespaces=SIEBEL job_name=GENERATETTS000024 logfile=EXPDAT.LOG
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Processing object type TRANSPORTABLE_EXPORT/TABLE
Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB [TABLE_STATISTICS]
ORA-04063: view "SYS.KU$_IOTABLE_VIEW" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.KUPW$WORKER", line 6241
----- PL/SQL Call Stack -----
object line object
handle number name
2CF48130 14916 package body SYS.KUPW$WORKER
2CF48130 6300 package body SYS.KUPW$WORKER
2CF48130 2340 package body SYS.KUPW$WORKER
2CF48130 6861 package body SYS.KUPW$WORKER
2CF48130 1262 package body SYS.KUPW$WORKER
2CF0850C 2 anonymous block
Job "SYS"."GENERATETTS000024" stopped due to fatal error at 19:31:44

More information:
Using SQL Developer, I checked the view SYS.KU$_IOTABLE_VIEW referred to in the error message, and it does indeed report a problem with that view. The following code is the definition of that view. I have no idea what it's supposed to be doing, because it was part of the default installation. I certainly didn't write it. I did, however, execute the 'Test Syntax' button (on the Edit View screen), and the result was this error message:
=======================================================
The SQL syntax is valid, however the query is invalid or uses functionality that is not supported.
Unknown error(s) parsing SQL: oracle.javatools.parser.plsql.syntax.ParserException: Unexpected token
=======================================================
The SQL for the view looks like this:
REM SYS KU$_IOTABLE_VIEW
CREATE OR REPLACE FORCE VIEW "SYS"."KU$_IOTABLE_VIEW" OF "SYS"."KU$_IOTABLE_T"
WITH OBJECT IDENTIFIER (obj_num) AS
select '2','3',
t.obj#,
value(o),
-- if this is a secondary table, get base obj and ancestor obj
decode(bitand(o.flags, 16), 16,
(select value(oo) from ku$_schemaobj_view oo, secobj$ s
where o.obj_num=s.secobj#
and oo.obj_num=s.obj#),
null),
decode(bitand(o.flags, 16), 16,
(select value(oo) from ku$_schemaobj_view oo, ind$ i, secobj$ s
where o.obj_num=s.secobj#
and i.obj#=s.obj#
and oo.obj_num=i.bo#),
null),
(select value(s) from ku$_storage_view s
where i.file# = s.file_num
and i.block# = s.block_num
and i.ts# = s.ts_num),
ts.name, ts.blocksize,
i.dataobj#, t.bobj#, t.tab#, t.cols,
t.clucols, i.pctfree$, i.initrans, i.maxtrans,
mod(i.pctthres$,256), i.spare2, t.flags,
t.audit$, t.rowcnt, t.blkcnt, t.empcnt, t.avgspc, t.chncnt, t.avgrln,
t.avgspc_flb, t.flbcnt, t.analyzetime, t.samplesize, t.degree,
t.instances, t.intcols, t.kernelcols, t.property, 'N', t.trigflag,
t.spare1, t.spare2, t.spare3, t.spare4, t.spare5, t.spare6,
decode(bitand(t.trigflag, 65536), 65536,
(select e.encalg from sys.enc$ e where e.obj#=t.obj#),
null),
decode(bitand(t.trigflag, 65536), 65536,
(select e.intalg from sys.enc$ e where e.obj#=t.obj#),
null),
(select c.name from col$ c
where c.obj# = t.obj#
and c.col# = i.trunccnt and i.trunccnt != 0
and bitand(c.property,1)=0),
cast( multiset(select * from ku$_column_view c
where c.obj_num = t.obj#
order by c.col_num, c.intcol_num
) as ku$_column_list_t
(select value(nt) from ku$_nt_parent_view nt
where nt.obj_num = t.obj#),
cast( multiset(select * from ku$_constraint0_view con
where con.obj_num = t.obj#
and con.contype not in (7,11)
) as ku$_constraint0_list_t
cast( multiset(select * from ku$_constraint1_view con
where con.obj_num = t.obj#
) as ku$_constraint1_list_t
cast( multiset(select * from ku$_constraint2_view con
where con.obj_num = t.obj#
) as ku$_constraint2_list_t
cast( multiset(select * from ku$_pkref_constraint_view con
where con.obj_num = t.obj#
) as ku$_pkref_constraint_list_t
(select value(ov) from ku$_ov_table_view ov
where ov.bobj_num = t.obj#
and bitand(t.property, 128) = 128), -- IOT has overflow
(select value(etv) from ku$_exttab_view etv
where etv.obj_num = o.obj_num)
from ku$_schemaobj_view o, tab$ t, ind$ i, ts$ ts
where t.obj# = o.obj_num
and t.pctused$ = i.obj# -- For IOTs, pctused has index obj#
and bitand(t.property, 32+64+512) = 64 -- IOT but not overflow
-- or partitioned (32)
and i.ts# = ts.ts#
AND (SYS_CONTEXT('USERENV','CURRENT_USERID') IN (o.owner_num, 0) OR
EXISTS ( SELECT * FROM session_roles
WHERE role='SELECT_CATALOG_ROLE' ));
GRANT SELECT ON "SYS"."KU$_IOTABLE_VIEW" TO PUBLIC;

Error ora-24324 during installtion

Similar Messages

Maybe you are looking for