Error ora-32004
hai
am getting this error while starting up the database
ora-32004--obsolete and/or dipricated parameters spcified
Thanks
Bhanuchander
Hi,
Remove that parameter from your init<SID>.ora file,
start your database with init<SID>.ora file, if it get successfully started, and everything works fine then
create spfile from pfile,
shutdown database and then start database.
Regards
Similar Messages
-
ORA-16024: - ORA-32004 - Parameter modification Error
Hi all,
I have two errors after modifying the LOG_ARCHIVE_DEST_1 parameter. I've run this...
ALTER SYSTEM SET LOG_ARCHIVE_DEST_1='LOCATION=/u04/archive/EST OPTIONAL REOPEN=300' SCOPE=spfile;
and after restarting the instance, I found these errors
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORA-16024: parameter LOG_ARCHIVE_DEST_1 cannot be parsed
I checked the spfile and I discovered an error in it due this change:
*.log_archive_dest_1='LOCATION=/u04/archive/EST OPTIONAL REPO^H^HOPEN=300'
"^H^H" these characters were inserted because an stty config error and I was not able to see them.
How should I procede to recover my instance?
ThanksThanks! I really appreciate your help!
I have no need to do a recovery, I just wanted to say only bringing it open again.
I am not able to start it up in nomount mode...
Thanks by your help!
EdStevens wrote:
martinmorono wrote:
Hi all,
I have two errors after modifying the LOG_ARCHIVE_DEST_1 parameter. I've run this...
ALTER SYSTEM SET LOG_ARCHIVE_DEST_1='LOCATION=/u04/archive/EST OPTIONAL REOPEN=300' SCOPE=spfile;
and after restarting the instance, I found these errors
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORA-16024: parameter LOG_ARCHIVE_DEST_1 cannot be parsed
I checked the spfile and I discovered an error in it due this change:
*.log_archive_dest_1='LOCATION=/u04/archive/EST OPTIONAL REPO^H^HOPEN=300'
"^H^H" these characters were inserted because an stty config error and I was not able to see them.
How should I procede to recover my instance?
ThanksFirst, is your instance in need of recovery? these look like non-fatal errors to me. Since you had intended that archive destination to be optional, I presume you have another, non-optional, destination that is good?
Are you able to do a 'startup nomount'? That's as far as you need to get to issue ALTER SYSTEM commands against the spfile to correct the bad value.
And btw, you didn't need to bounce the system in the first place. log_archive_dest_n is a dynamic parameter - you could have specified scope=both and kept on trucking - or gotten an error at that time:
SQL> alter system set log_archive_dest_2='location=c: lksdjf optional' scope=both;
alter system set log_archive_dest_2='location=c: lksdjf optional' scope=both
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-16024: parameter LOG_ARCHIVE_DEST_2 cannot be parsed
SQL> alter system set log_archive_dest_2='location=c:\temp optional' scope=both
System altered.
SQL> alter system set log_archive_dest_2='' scope=both;
System altered.
SQL> -
Hi,
While trying to open the database I am getting the error ORA-32004
The Alert Log file showed the following Depricated parameter entry
Deprecated system parameters with specified values:
sql_trace
End of deprecated system parameter listing
Please let me know how to resolve this issue.
Thanks
Amithcomment it out or remove that row from the parameter file - $ORACLE_HOME/dbs/init<SID>.ora is the default location
Christopher Soza
Oracle BI DBA
Orix Consultancy Services Ltd
b: http://sozaman.blogspot.com -
ORA-32004: obsolete and/or deprecated parameter(s) specifiedORACLE instance
Hi friends,
i am trying to install BIW 3.0b (win-2000, oracle 9.2.0.1.0 (patch 9.1.0.4.1)& j2sdk 1_4_1)
while installing database instance i am getting this problem.
INFO 2007-09-26 15:57:09
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2007-09-26 15:57:09
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2007-09-26 15:58:14
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-09-26 15:58:35
The 'saploc' share exists at directory 'E:\usr\sap'. Choosing drive E: as SAP System drive.
INFO 2007-09-26 16:00:26
Copying file C:/dump/export1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2007-09-26 16:00:26
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2007-09-26 16:00:26
Copying file system node C:\dump\export1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2007-09-26 16:00:26
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-09-26 16:00:26
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2007-09-26 16:00:26
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2007-09-26 16:00:26
Copying file C:/dump/export1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2007-09-26 16:00:26
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2007-09-26 16:00:26
Copying file system node C:\dump\export1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2007-09-26 16:00:26
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-09-26 16:00:33
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2007-09-26 16:00:33
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2007-09-26 16:00:33
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2007-09-26 16:02:00
Package table created
PHASE 2007-09-26 16:02:10
SAP Business WareHouse
PHASE 2007-09-26 16:02:10
SAP Web Application Server
PHASE 2007-09-26 16:02:10
Request common parameters of SAP System
PHASE 2007-09-26 16:02:10
Create operating system accounts
INFO 2007-09-26 16:02:10
Changing account ACCOUNTID=S-1-5-21-1844237615-963894560-725345543-1004 ACCOUNTNAME=biwdev\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-09-26 16:02:10
Changing account ACCOUNTID=S-1-5-21-1844237615-963894560-725345543-1005 ACCOUNTNAME=biwdev\SAP_BWD_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-09-26 16:02:10
Changing account ACCOUNTID=S-1-5-21-1844237615-963894560-725345543-1006 ACCOUNTNAME=biwdev\SAP_BWD_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-09-26 16:02:10
Changing account ACCOUNTID=S-1-5-21-1844237615-963894560-725345543-1007 ACCOUNTNAME=ORA_BWD_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-09-26 16:02:10
Changing account ACCOUNTID=S-1-5-21-1844237615-963894560-725345543-1008 ACCOUNTNAME=ORA_BWD_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-09-26 16:02:10
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2007-09-26 16:02:15
Changing account ACCOUNTID=S-1-5-21-1844237615-963894560-725345543-1009 ACCOUNTNAME=biwdev\bwdadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=biwdev\SAP_BWD_GlobalAdmin,biwdev\Users,Administrators,ORA_BWD_DBA,ORA_BWD_OPER,biwdev\SAP_LocalAdmin,biwdev\SAP_BWD_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-09-26 16:02:15
Changing account ACCOUNTID=S-1-5-21-1844237615-963894560-725345543-1010 ACCOUNTNAME=biwdev\SAPServiceBWD ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=biwdev\SAP_BWD_GlobalAdmin,Administrators,ORA_BWD_DBA,ORA_BWD_OPER,biwdev\SAP_LocalAdmin,biwdev\SAP_BWD_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-09-26 16:02:15
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:16
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
PHASE 2007-09-26 16:02:17
Request operating system user information
INFO 2007-09-26 16:02:17
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1844237615-963894560-725345543-1009' on host 'biwdev'!
INFO 2007-09-26 16:02:17
Successfully added privileges 'SeServiceLogonRight SeNetworkLogonRight' to account 'biwdev\SAPServiceBWD' on host 'biwdev'!
INFO 2007-09-26 16:02:17
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'biwdev\bwdadm' on host 'biwdev'!
INFO 2007-09-26 16:02:18
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2007-09-26 16:02:19
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:20
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:21
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:21
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:22
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:23
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:24
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:24
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-09-26 16:02:53
Creating directory E:\oracle\BWD\sapdata1\system_1.
INFO 2007-09-26 16:02:53
Creating file system node E:\oracle\BWD/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-09-26 16:02:53
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-09-26 16:02:53
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-09-26 16:02:53
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-09-26 16:02:55
Copying file C:/dump/master/NT/COMMON/INSTALL/INITSID.ORA to: E:\oracle\ora92\database\initBWD.ora.
INFO 2007-09-26 16:02:55
Creating file E:\oracle\ora92\database\initBWD.ora.
INFO 2007-09-26 16:02:55
Copying file system node C:\dump\master/NT/COMMON/INSTALL/INITSID.ORA with type FILE to E:\oracle\ora92\database\initBWD.ora succeeded.
INFO 2007-09-26 16:02:55
Copying file C:/dump/master/NT/COMMON/INSTALL/INITSID.SAP to: E:\oracle\ora92\database\initBWD.sap.
INFO 2007-09-26 16:02:55
Creating file E:\oracle\ora92\database\initBWD.sap.
INFO 2007-09-26 16:02:55
Copying file system node C:\dump\master/NT/COMMON/INSTALL/INITSID.SAP with type FILE to E:\oracle\ora92\database\initBWD.sap succeeded.
INFO 2007-09-26 16:02:55
Copying file C:/dump/master/NT/COMMON/INSTALL/INITSID.DBA to: E:\oracle\ora92\database\initBWD.dba.
INFO 2007-09-26 16:02:55
Creating file E:\oracle\ora92\database\initBWD.dba.
INFO 2007-09-26 16:02:55
Copying file system node C:\dump\master/NT/COMMON/INSTALL/INITSID.DBA with type FILE to E:\oracle\ora92\database\initBWD.dba succeeded.
INFO 2007-09-26 16:02:55
Processing of all file system node operations of table tORA_ServerConfig_FORMS succeeded.
INFO 2007-09-26 16:02:57
Processing of adapt operation tORA_ServerConfig succeeded.
INFO 2007-09-26 16:02:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-09-26 16:03:02
Moving file E:/oracle/ora92/database/initBWD.ora to: orig_init_ora_tmp.txt.
INFO 2007-09-26 16:03:02
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: E:\oracle\ora92\database\initBWD.ora.
INFO 2007-09-26 16:03:02
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
WARNING 2007-09-26 16:03:02
PROBLEM: 'E:\oracle\ora92/bin/oradim' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
WARNING 2007-09-26 16:03:02
PROBLEM: 'E:\oracle\ora92/bin/oradim' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
INFO 2007-09-26 16:03:02
'E:\oracle\ora92/bin/oradim -new -sid BWD -STARTMODE auto' returned with '20'.
INFO 2007-09-26 16:03:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-09-26 16:03:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-09-26 16:03:13
CJS-00084 SQL Statement or Script failed. Error Message: ORA-32004: obsolete and/or deprecated parameter(s) specifiedORACLE instance started.
ERROR 2007-09-26 16:03:13
FJS-00012 Error when executing script.
Please let me know, what was tha problem.
Regards,
satishI suggest you upgrade your Oracle installation to 9.2.0.7 or 9.2.0.8 and then try again.
Markus -
Initialization parameters. ORA-32004
Hello all!
After upgrading from 9.1.0.6 to 10.2.04 following error appears:
SQL> startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
Total System Global Area 872415232 bytes
Fixed Size 1270436 bytes
Variable Size 801115484 bytes
Database Buffers 67108864 bytes
Redo Buffers 2920448 bytes
Database mounted.
Database opened.
My initdatabasename.ora listing:
*.aq_tm_processes=1
*.audit_trail='DB'
*.background_dump_dest='/u01/app/oracle/admin/puba/bdump'
*.compatible='9.2.0.0.0'
*.control_files='/u02/oradata/puba/control01.ctl','/u03/oradata/puba/control02.ctl','/u04/oradata/puba/control03.ctl'
*.core_dump_dest='/u01/app/oracle/admin/puba/cdump'
*.db_block_size=8192
*.db_cache_size=67108864
*.db_domain='domainname.com'
*.db_file_multiblock_read_count=16
*.db_name='puba'
*.fast_start_mttr_target=300
*.hash_join_enabled=TRUE
*.instance_name='puba'
*.java_pool_size=193125990
*.job_queue_processes=6
*.large_pool_size=193125990
*.max_enabled_roles=100
*.O7_DICTIONARY_ACCESSIBILITY=true
*.open_cursors=300
*.optimizer_index_caching=50
*.optimizer_index_cost_adj=3
*.pga_aggregate_target=25165824
*.processes=750
*.query_rewrite_enabled='FALSE'
*.remote_login_passwordfile='NONE'
*.shared_pool_size=193125990
*.sort_area_size=524288
*.star_transformation_enabled='FALSE'
*.streams_pool_size=209715200
*.timed_statistics=TRUE
*.undo_management='AUTO'
*.undo_retention=10800
*.undo_tablespace='UNDO'
*.user_dump_dest='/u01/app/oracle/admin/puba/udump'
*.PLSQL_V2_COMPATIBILITY = FALSE
*.PLSQL_NATIVE_LIBRARY_DIR = ""
*.PLSQL_NATIVE_LIBRARY_SUBDIR_COUNT = 0
*.session_max_open_files=200
Old ORACLE_HOME /u01/app/oracle/product/9.2.0
New ORACLE_HOME /u05/app/ordacle/product/10.2.0/db_1
How to identify what parameter I should change? There is nothing in alert_.log file. It seems that nothing has been written since upgrade. I use old destination for bdump, cdump, udump. Is it right?
Thanks for any clue how to fix this problem!Thanks to your replies!
Well done!
I copied /u01/app/oracle/admin to /u05/app/oracle/admin. Restarted database. And found in /u05/app/oracle/admin/puba/bdump/alertpuba.log following:
Deprecated system parameters with specified values:
max_enabled_roles
I commited it and as the result:
SQL> startup
ORACLE instance started.
Total System Global Area 876609536 bytes
Fixed Size 1270436 bytes
Variable Size 801115484 bytes
Database Buffers 67108864 bytes
Redo Buffers 7114752 bytes
Database mounted.
Database opened.
I also checked v$parameter:
SQL> select name from v$parameter where isdeprecated='TRUE';
NAME
lock_name_space
buffer_pool_keep
buffer_pool_recycle
max_commit_propagation_delay
remote_archive_enable
log_archive_start
parallel_server
parallel_server_instances
fast_start_io_target
logmnr_max_persistent_sessions
serial_reuse
NAME
max_enabled_roles
global_context_pool_size
plsql_compiler_flags
sql_trace
parallel_automatic_tuning
drs_start
17 rows selected.
What I should do with this parameters? And what does the result of selection mean? -
Hello all!
After upgrading from 9.1.0.6 to 10.2.04 following error appears:
SQL> startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
Total System Global Area 872415232 bytes
Fixed Size 1270436 bytes
Variable Size 801115484 bytes
Database Buffers 67108864 bytes
Redo Buffers 2920448 bytes
Database mounted.
Database opened.
My initdatabasename.ora listing:
*.aq_tm_processes=1
*.audit_trail='DB'
*.background_dump_dest='/u01/app/oracle/admin/puba/bdump'
*.compatible='9.2.0.0.0'
*.control_files='/u02/oradata/puba/control01.ctl','/u03/oradata/puba/control02.ctl','/u04/oradata/puba/control03.ctl'
*.core_dump_dest='/u01/app/oracle/admin/puba/cdump'
*.db_block_size=8192
*.db_cache_size=67108864
*.db_domain='domainname.com'
*.db_file_multiblock_read_count=16
*.db_name='puba'
*.fast_start_mttr_target=300
*.hash_join_enabled=TRUE
*.instance_name='puba'
*.java_pool_size=193125990
*.job_queue_processes=6
*.large_pool_size=193125990
*.max_enabled_roles=100
*.O7_DICTIONARY_ACCESSIBILITY=true
*.open_cursors=300
*.optimizer_index_caching=50
*.optimizer_index_cost_adj=3
*.pga_aggregate_target=25165824
*.processes=750
*.query_rewrite_enabled='FALSE'
*.remote_login_passwordfile='NONE'
*.shared_pool_size=193125990
*.sort_area_size=524288
*.star_transformation_enabled='FALSE'
*.streams_pool_size=209715200
*.timed_statistics=TRUE
*.undo_management='AUTO'
*.undo_retention=10800
*.undo_tablespace='UNDO'
*.user_dump_dest='/u01/app/oracle/admin/puba/udump'
*.PLSQL_V2_COMPATIBILITY = FALSE
*.PLSQL_NATIVE_LIBRARY_DIR = ""
*.PLSQL_NATIVE_LIBRARY_SUBDIR_COUNT = 0
*.session_max_open_files=200
Old ORACLE_HOME /u01/app/oracle/product/9.2.0
New ORACLE_HOME /u05/app/ordacle/product/10.2.0/db_1
Thanks for any clue how to fix this problem!You can refer the following list to verify for yourself:
Initialization Parameters Obsolete in 10g:
ENQUEUE_RESOURCES
DBLINK_ENCRYPT_LOGIN
HASH_JOIN_ENABLED
LOG_PARALLELISM
MAX_ROLLBACK_SEGMENTS
MTS_CIRCUITS
MTS_DISPATCHERS
MTS_LISTENER_ADDRESS
MTS_MAX_DISPATCHERS
MTS_MAX_SERVERS
MTS_MULTIPLE_LISTENERS
MTS_SERVERS
MTS_SERVICE
MTS_SESSIONS
OPTIMIZER_MAX_PERMUTATIONS
ORACLE_TRACE_COLLECTION_NAME
ORACLE_TRACE_COLLECTION_PATH
ORACLE_TRACE_COLLECTION_SIZE
ORACLE_TRACE_ENABLE
ORACLE_TRACE_FACILITY_NAME
ORACLE_TRACE_FACILITY_PATH
PARTITION_VIEW_ENABLED
PLSQL_NATIVE_C_COMPILER
PLSQL_NATIVE_LINKER
PLSQL_NATIVE_MAKE_FILE_NAME
PLSQL_NATIVE_MAKE_UTILITY
ROW_LOCKING
SERIALIZABLE
TRANSACTION_AUDITING
UNDO_SUPPRESS_ERRORS
Initialization Parameters Deprecated in 10g
LOGMNR_MAX_PERSISTENT_SESSIONS
MAX_COMMIT_PROPAGATION_DELAY
REMOTE_ARCHIVE_ENABLE
SERIAL_REUSE
SQL_TRACE
BUFFER_POOL_KEEP (replaced by DB_KEEP_CACHE_SIZE)
BUFFER_POOL_RECYCLE (replaced by DB_RECYCLE_CACHE_SIZE)
GLOBAL_CONTEXT_POOL_SIZE
LOCK_NAME_SPACE
LOG_ARCHIVE_START
MAX_ENABLED_ROLES
PARALLEL_AUTOMATIC_TUNING
PLSQL_COMPILER_FLAGS (replaced by PLSQL_CODE_TYPE and PLSQL_DEBUG)
I just quickly checked. You can remove this parameter:
*.hash_join_enabled=TRUE
Cheers,
Anirban
Edited by: user761627 on Sep 30, 2008 5:13 AM -
ORA-32004 - LOG_ARCHIVE_START
Hi All,
I've received this error message during the database' startup:
SQL> startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
Total System Global Area 1610612736 bytes
Fixed Size 2056504 bytes
Variable Size 872419016 bytes
Database Buffers 721420288 bytes
Redo Buffers 14716928 bytes
Database mounted.
Database opened.
SQL>
I've checked the alert.log and I've found this:
Deprecated system parameters with specified values:
log_archive_start
End of deprecated system parameter listing
And the value for this parameter is set to:
SQL> show parameter log_archive_start
NAME TYPE VALUE
log_archive_start boolean FALSE
SQL>
The same value is defined in other instances with no error at startup.
Does anybody an idea of what's wrong?
Thanks in advance.
MartinSince I added the parameter to my instance I had to remove it as well. Below are the steps I took to remove the parameter. I had already created a pfile earlier so I used that one to start up the instance.
Note you will see I recieve the same error on startup
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
Total System Global Area 419430400 bytes
Fixed Size 1267860 bytes
Variable Size 155191148 bytes
Database Buffers 260046848 bytes
Redo Buffers 2924544 bytes
Database mounted.
Database opened.
SQL>
SQL> show parameter spfile
NAME TYPE VALUE
spfile string /u01/app/oracle/product/10.2.0
/db_1/dbs/spfileora10r2.ora
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup pfile='/home/oracle/spfile.txt'
ORACLE instance started.
Total System Global Area 419430400 bytes
Fixed Size 1267860 bytes
Variable Size 155191148 bytes
Database Buffers 260046848 bytes
Redo Buffers 2924544 bytes
Database mounted.
Database opened.
SQL> create spfile='/u01/app/oracle/product/10.2.0/db_1/dbs/spfileora10r2.ora' from pfile='/home/oracle/spfile.txt';
File created.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 419430400 bytes
Fixed Size 1267860 bytes
Variable Size 155191148 bytes
Database Buffers 260046848 bytes
Redo Buffers 2924544 bytes
Database mounted.
Database opened.
SQL> -
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
hi
how to fix this error??
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.OS := OEL 5.6
DB:= 11R2 single instance
kind regardsno one wrote:
hi
how to fix this error??
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.OS := OEL 5.6
DB:= 11R2 single instance
kind regardsThis parameter is deprecated in Oracle 10g
This parameter determines if the background process ARCH is started. It can be set to either true or false.
Of course, it makes no sense, if this parameter is set to true if the database is running in noarchive log mode. If ARCH is started with the database being in noarchive log mode, messages like media recovery disabled will be written into the alert.log file. -
What reason ORA-32004: obsolete and/or deprecated parameter(s) specified ?
Hi
ORA-32004: obsolete and/or deprecated parameter(s) specified
Whenever i changed my test database from noarchive log mode to archive log mode, after i changed ,i startup database the above error occured.
following steps i do it,
SQL> archive log list;
Database log mode No Archive Mode
Automatic archival Disable
Archive destination: c:\oracle\ora90\rdbms
Oldest on-line log sequence 0
Next log sequence 0
Current log sequence 0
Change your database No Archive mode to Archive mode
Your Database must in mount stage
SQL>shutdown immediate
SQL>startup mount
SQL> archive log list;
Database log mode No Archive Mode
Automatic archival Disable
Archive destination: c:\oracle\ora90\rdbms
Oldest on-line log sequence 0
Next log sequence 0
Current log sequence 0
SQL> alter database archivelog;
Database altered.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Disable
Archive destination: c:\oracle\ora90\rdbms
Oldest on-line log sequence 0
Next log sequence 0
Current log sequence 0
SQL>alter database open;
SQL>archive log list
Database log mode Archive Mode
Automatic archival Disable
Archive destination: c:\oracle\ora90\rdbms
Oldest on-line log sequence 0
Next log sequence 0
Current log sequence 0
Automatic archival – Disable (the database archive mode but automatic
archival disable
So datas not archive.you must enable the automatic archival)
SQL>archive log start; (session level only enabled not instance level)
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enable
Archive destination: c:\oracle\ora90\rdbms
Oldest on-line log sequence 0
Next log sequence 0
Current log sequence 0
If you want set instance level you change in parameter file
SQL>show parameter log_archive_start
Name Type Value
log_archive_start boolean FALSE
SQL>alter system set log_archive_start=true scope=spfile
System altered.
SQL>shut immediate
SQL>startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
Database open.
sql>
But i resolved the problem
I want know the reason why the above error occured
database version : 10g
os : xp ( my laptop) Not office database
Regards
S.Azar
DBA>
SQL>alter system set log_archive_start=true scope=spfile
System altered.
SQL>shut immediate
SQL>startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
>
Precisely that parameter LOG_ARCHIVE_START is obsolete in 10g. You also don't need to enable the archiving with
archive log start
Simply changing into archive mode also brings up archiver processes since 10g :-)
Kind regards
Uwe
http://uhesse.wordpress.com -
Not valid month Error Ora 01843
hi
This is an error while running a report 6i. in Oracle 8i Environment.
"Not valid month Error Ora 01843"
This report is working fine in Production. But it is not working in Development Database.
Development database is the image of Production system.
Any reason for this Error?Dear Naseer C ,
We got similar experiences for several time.
We quried like that.
Selet moth from table;
08-AUG-1988
08-08-1988
08-08-88
We changed several time until diappear the message.
Hopefully, it will help you.
Best regards,
S!G -
Unable to add external data source in BAM : Error ORA-12505
Hi,
In BAM,
Im trying to add an external data source for creating a data object.
But when i try to test the connection i get the following error:
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Source: "java.sql.SQLException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Source: "oracle.net.ns.NetException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
As mentioned in another post ((Listener does not currently know of SID given in connection descriptor
i tried
lsnrctl stop.
delete listener.ora
lsnrctl start
lsnrctl reload
But still get the same error;
Im able to access the database with the specified username and password using sqlplus.
Your help will be appreciated.
Regards
Vignesh RamanathanFor #5, not Windows, ConfigMgr 2012 R2. Anything before ConfigMgr 2012 R2 is not supported for the 8.1 ADK.
For the permissions, what accounts are you setting this for. In general, if the share is on the same server, Everyone Full or Read on the Share and System Full or Read on the NTFS should work.
For the error message, it looks like you are trying to import an OS Image and not an OS Install Package. OS images use a WIM file and OS Install Packages use the entire set of source files from the media. For OS images, you must thus explicitly point it
to a specific WIM file.
Jason | http://blog.configmgrftw.com -
Error ORA-12560 prompts when trying to log in to the Enterprise Manager
Hi all,
I am a newbie to Oracle.
Just installed the Oracle 9i Database Enterprise Edition (9.0.1) into Windows Server 2003 Standard Edition. Problem is encountered when trying to log in to the Enterprise Manager Standalone mode using either system/oracle or scott/tiger as credentials. Error "ORA-12560: TNS:protocol adapter error" prompts.
I tried to check with some configuration and see whether the services are started. Services of "OracleOraHome90TNSListener" and "OracleServiceORCL" have been started and the database exists in the dedicated directory. Environment variables of "ORACLE_HOME" and "ORACLE_SID" have been added manually as the SID is set to orcl, which I just follow what the instruction manual has stated. Moreover, I can't get access using command prompt typing "svrmgrl"; error returned stating " 'svrmgrl' is not recognized as an internal or external command, operable program or batch file."
Another information is that there is no domain set in my server. Just a server with a name being assigned in a workgroup.
Hence, would you mind please advice me what to do in order to get access into the Enterprise Manager? It's quite an urgent task.
A million thx in advance!
Best Regards,
KarenHi Jigneshrp,
Thanks for your reply.
It is checked that the listener is running and TNS name service exists. Following your advice, I did create a new listener and another name service and use them, but the same error turns out when trying to log in to the Enterprise Manager again.
Additional information to take note for is that while reconfiguring the existing listener or creating a new listener, a mesage prompts stating "The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as it is, but it will not be possible to start this listener until the conflict is resolved. Would you like to continue with the continue with the configuration anyway? Yes/No".
As for the reconfiguration or the new creation of TNS names service, when I am trying to test for the connection, the results in the details pane states that "Connecting... ORA-12560: TNS:protocol adapter error. The test did not succeed...."
Would you mind pls advice me on these?
Furthermore, there exist 2 questions I am wondering is that it is stated in the instruction manual that prior to the installation, a static IP should be specified for it instead of the DHCP one; hence, I wanna ask after the complete insallation, is it that the server should be running in the network, i.e. allow it to get connected with the outside network?
2nd question is that can Oracle 9i Database Server Standard Edition (9.0.1) be installed under a Windows Server 2003 Standard Edition and just a Window XP Professional?
Thanks for your reply.
Best Regards,
Karen -
Error while trying to retrieve text for error ORA-12154
Hello,
I try to install php 5.1.2 on a WIN2003 server and IIS6 with the OCi8 extension without success from several days.
On my server I've a 920 oracle client and the 10.1 instant client, I copy the tnsnames.ora in the instant client's directory.
I've declare many environnement variables :
- NLS_LANG : AMERICAN_AMERICA.WE8MSWIN1252
- TNS_ADMIN : E:\...\oracle\instantclient_10_1
- ORA_NLS33 : E:\..\oracle\920\ocommon\nls\ADMIN\DATA
With the php command line the oci_connect function correctly works : the php command line use the instant client's tnsnames.ora. I can query with success my database.
When I try to load a web php script (the same as the php command line script) I have the following error " Error while trying to retrieve text for error ORA-12154" ( oci_connect( $user , $pass, $sid ) . The $sid variable have the value of an alias declared in the tnsnames.ora.
If I replace the sid's alias by something like this " (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xx.xx.xx.xx)(PORT=1521)))(CONNECT_DATA=(SID=xx)" in the oci_connect function, I have another error : Error while trying to retrieve text for error ORA-12705.
A web page with the phpinfo function displays the following messages about oci8 extension : It seems to be correct.
oci8
OCI8 Support enabled
Revision $Revision: 1.269.2.8 $
Active Persistent Connections 0
Active Connections 0
Temporary Lob support enabled
Collections support enabled
Do you have any idea ? Thanks a lotThe web server is not seeing the Oracle environment correctly. You need to set PATH to the instant client libraries. ORA_NLS33 is not used for Oracle 10g clients. Perhaps you have some library conflict with two versions of Oracle on the machine?
These may help:
http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#envvars
http://blogs.oracle.com/opal/2006/05/01 -
Error ORA-03113: end-of-file on communication channel in droppping a table
Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna ZanettiGood morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti -
Import Export Error (ORA-06502)
All,
We are trying to migrate the code from windows 2000 HTMLDB 1.5.0.00.33 to solaris 9 HTMLDB 1.5.0.00.33 by using the export/import function. After migration, one report went wrong with the following message.
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
The tables definition are identical and there's no data in the production table. When we try to reduce the query length from 3000 to 2500 characters, the error message disappears on production.
Is there any HTMLDB global variable controls the maximum length of the report "region source"?
Any response would be appreciate.
Thanks,
Tony
===========================================
PS: Here's our query:
select
x.supreq_id,
DECODE(x.pk, null, 'Add new record:', ''||'<img src="#IMAGE_PREFIX#edit.gif" border="0" alt="Edit Icon">') edit,
x.pk,
x.request,
x.subject,
x.severity,
x.priority,
x.status,
x.request_type,
x.response,
x.username,
x.created_date,
x.note,
x.cks
from (
select
htmldb_item.hidden(1,supreq_id) supreq_id,
supreq_id edit,
supreq_id pk,
htmldb_item.text(3, request,'','','onFocus="javascript:window.status=this.value" onBlur="javascript:window.status=''Done''"') request,
htmldb_item.select_list_from_lov(4,subject,'REQUEST_SUBJECT','','NO') subject,
htmldb_item.select_list(5, severity, '3,2,1', 'style="width:40px"','NO') severity,
htmldb_item.select_list_from_lov(6,priority,'REQUEST_PRIORITY','','NO') priority,
htmldb_item.select_list_from_lov(7,status,'REQUEST_STATUS','','NO') status,
htmldb_item.select_list_from_lov(8, request_type, 'SUPPORT_REQUEST_TYPE','', 'NO') request_type,
htmldb_item.text(9, response,'','','onFocus=javascript:window.status=this.value;') response,
htmldb_item.select_list_from_lov(10, username, 'USER_EMPLOYEE', 'style="width:100px"','NO') username,
htmldb_item.date_popup(11, rownum,created_date, 'mm/dd/yyyy', 8) created_date,
htmldb_item.text(12, note,'','','onFocus=javascript:window.status=this.value;') note,
htmldb_item.md5_checksum(request, subject, severity, priority, status, request_type, response, username, created_date,note) cks
from
art_sup_requests
where
(:P319_PRIORITY IS NULL OR :P319_PRIORITY ='%' OR
INSTR(UPPER(ART_SUP_REQUESTS.PRIORITY),UPPER(:P319_PRIORITY)) > 0)
AND
(:P319_SEVERITY IS NULL OR :P319_SEVERITY ='%' OR
INSTR(UPPER(ART_SUP_REQUESTS.SEVERITY),UPPER(:P319_SEVERITY)) > 0)
AND
(:P319_SUBJECT IS NULL OR :P319_SUBJECT ='%' OR
INSTR(UPPER(ART_SUP_REQUESTS.SUBJECT),UPPER(:P319_SUBJECT)) > 0)
AND (:P319_CREATED_DATE IS NULL OR
TRUNC(ART_SUP_REQUESTS.CREATED_DATE)=TO_DATE(:P319_CREATED_DATE,'MM/DD/YYYY'))
AND (:P319_REQUEST_TYPE IS NULL OR :P319_REQUEST_TYPE ='%' OR
INSTR(UPPER(ART_SUP_REQUESTS.REQUEST_TYPE),UPPER(:P319_REQUEST_TYPE)) > 0)
AND (:P319_REQUEST IS NULL OR
INSTR(UPPER(ART_SUP_REQUESTS.REQUEST),UPPER(:P319_REQUEST)) > 0)
AND (:P319_USERNAME IS NULL OR :P319_USERNAME ='%' OR
INSTR(UPPER(ART_SUP_REQUESTS.USERNAME),UPPER(:P319_USERNAME)) > 0)
AND (:P319_ID IS NULL OR ART_SUP_REQUESTS.SUPREQ_ID = :P319_ID)
union all
select
htmldb_item.hidden(1,null) supreq_id,
null edit,
null pk,
htmldb_item.text(3, null) request,
htmldb_item.select_list_from_lov(4,null,'REQUEST_SUBJECT','','NO') subject,
htmldb_item.select_list(5, null, '3,2,1', 'style="width:40px"','NO') severity,
htmldb_item.select_list_from_lov(6,null,'REQUEST_PRIORITY','','NO') priority,
htmldb_item.select_list_from_lov(7,null,'REQUEST_STATUS','','NO') status,
htmldb_item.select_list_from_lov(8, null, 'SUPPORT_REQUEST_TYPE','', 'NO') request_type,
htmldb_item.text(9, null) response,
htmldb_item.select_list_from_lov(10, null,
'USER_EMPLOYEE','style="width:100px"','NO') username,
htmldb_item.date_popup(11, null, sysdate,'mm/dd/yyyy', 8) created_date,
htmldb_item.text(12, null) note,
htmldb_item.md5_checksum(null,null, null, null, null, null, null, null, null, null) cks
from dual) xScott,
Thanks for the response. We've applied HTMLDB version 1.5.1.00.12 on both develop and production servers yesterday but the ORA-06502 error still persist. We've also tried to use package and "pl/sql return sql" instead of a long sql query but received the same result.
The solaris instance is using "Western European ISO-8859-1" as the file character set and the windows is using "Western European Windows 1252". Is there any easy way to change the DAD character set on the production box?
Thanks,
Tony
Maybe you are looking for
-
HI Experts, I am facing one problem , we have one webdynpro application it will pass 3000 records to back end server via rfc . In development and quality it is working fine . But in production it is throwing following error. Message: Exception occure
-
After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard
-
Setting up mobile accounts to delete after logout issues
Running a network with about 2,000 users. Due to the amount of time to login the sever at each workstation we set up about half of them to sync and to be mobile account within workgroup manager. We have the settings as followed for the sync.... creat
-
Hi, I am getting a message +OK Hello there when my outgoing mail server (Onetel) fails to connect. I have contacted Onetel and confirmed that all settings are correct but I am still unable to connect - my incoming is OK. This is on a MacBook and I re
-
Dual 2.5 G5 won't auto sleep
Ever since I updated to 10.4.7, my dual G5 won't automatically sleep after any amount of time I set it to. The computer will sleep if I force it to either using the keyboard shortcut or through the Apple menu. The computer will also auto sleep in the