Error ordinal 459 could not be opened. error occurs on every plug in install

I keep getting the error message "ordinal 459 could not be opened" when trying to update flash player or installing any plugin. I have tried every solution that I have read and nothing works.

Try this Microsoft suggestion: [http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459-could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a]

Similar Messages

Ordinal 459 could not be located in dynamic link library.urlmon.dll What the heck is this and how do I fix it?

I get the following message:the ordinal 459 could not be located in the dynamic link library. urlmon.dll. I get this when requesting list links within a genealogy program (not on the internet) Haven't noticed it on anything else yet because I have been obsessing over just that one program. At the same time I notice that my windows sidebar is not visible. Have not changed any settings. Java was disabled due to the recent exploitation. Would that have something to do with it. Or perhaps Firefox18 installed and then it went bad? Thanks in advance for any help. Running Vista.

If this issue is caused after you have applied MS13-008 which is a security update then I would think that this is a Firefox issue and that something changed and they have to find a new way to do what they where doing before the update.
However since the error message states it can't find the file urlmon.dll has anyone checked on why this file is missing or why it is not registered? Since URLMON.DLL is not updated by MS13-008 I would suspect this could be a coincidence.
Here is a related Microsoft KB article about that dll causing similar issues with IE and how to address it.
http://support.microsoft.com/kb/281679
I mean a quick google of that exact error message "The ordinal 459 could not be located in the dynamic link library urlmon.dll" has results of this problem going back to at least 2011 long before MS13-008 was released. There are a number of solutions as well for different situations posted.
It may be worth checking some of those is the Microsoft KB above doesn't help.
And yet I am left thinking that Tyler's statement from January 16 about it being reported by other uses and apparently being caused by malware is the most likely reason for this issue. He does know Firefox rather well, and he is an employee of Mozilla. So I really would start with his suggestions of checking out their KB's he listed:
https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware
https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

The document "03540 phone numbers" could not be opened.

strange problem with numbers:
suddenly have following message:
The document “03540 phone numbers” could not be opened.
have it on every file I try to open with numbers. Pages works normally.
Anyone experienced something like this?
How to get round it?
Mark

tried to open with time machine (yes, I do backups :-) but how does this system work? I can get a preview of the file, but again can' t open it.
a new file I created, I do am able to open it.

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Error message when installing iTunes on my PC: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package

Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer package

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

Itunes wont open, I get "itunes application could not be opened. An unknown error occurred (-50)"

I'm on Windows 7 - using itunes daily without problems and suddenly itunes wont open, I get "itunes application could not be opened. An unknown error occurred (-50)" The only thing I can think is I think there was a download in progress when I shut down the computer.
I tried uninstalling and reinstalled, but I get the same thing. I tried clearing the itunes folder and reinstalling, same thing. help!

Doublechecking. When you did the complete uninstall, were you using the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If damaged program files are involved here, a standard install might not remove them, and a reinstall might not then replace them. So the Verify iTunes and related components are completely uninstalled section is an important step.)

The iTunes application could not be opened. An unknown error occurred (-50)

Today, I downloaded the latest version of Itunes.
When it finished installing it came up with the following error:
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I have uninstalled iTunes, and all related Apple software and re-installed iTunes several times and still I get the same error.
I contacted Apple support and was sent two emails. One detailing what needed to be uninstalled and then a web site to go to where I could download and install Microsoft's latest .NET Framework, which apparently was the root cause of the problem.
I did as instructed:Use the Control Panel to uninstall iTunes and related software components in the following order:
1.iTunes
2.QuickTime
3.Apple Software Update
4.Apple Mobile Device Support
5.Bonjour
6.Apple Application Support (iTunes 9 or later).
Restarted the PC and then downloaded the latest version of Microsoft's .NET Framework - version 4.
Restarted the PC again and received a strange message from some Apple application I have never heard of stating "CoreFoundation.dll file is missing".
I GOOGLEd the message and found out I also needed to unistall another Apple application called MobileMe. So, I did this and restarted the PC again!
I then downloaded the latest version of iTunes, again.
Now I'm getting "The iTunes application could not be opened. An unknown error occurred (-50).
From checking through GOOGLE, I believe it's something to do with user accounts and iTunes not being able to find the music folder???? But the answers I found all relate to Windows 64 pit PC's.
I am running Windows 7, 32 bit on a Sony Vaio laptop.
I cannot get support from Apple as I don't own a MAC. But I do own an iPhone but it's out of warranty.
HELP !!!!
Can anybody please help me?
Thx

If you go to the web page "http://support.apple.com/kb/ht1923" and follow the "Verify iTunes and related components are completely uninstalled" it does the trick. There are few other folders and files that alos need to be deleted!
iTunes is now working.

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
32 GB RAM
ATI Radeon HD 5770
OS X 10.7.5 Lion
I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
Best regards.
1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
3. I have purchased a third WD Caviar Black 2 TB HDD.
4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
6. On starting the system, it will report to initialize the new drive.
7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

ITunes application could not be opened. An unknown error occurred (0x666D7

Been using iTunes 6 and 6.5 for months and months on my computer. Upgraded to 7.0. Installs just fine. No errors, no issues.
At the end, it asks if it can launch iTunes 7.0 and I click okay. I get this:
The iTunes application could not be opened. An unknown error occurred (0x666D743F).
Apple, HELP!!!! I can't use iTunes at all!!!! I'd be willing to reinstall 6 or 6.5 if I could find it somewhere.
Can someone please help?

This happened to me as well. I uninstalled iTunes 7 and tried again: nothing. I uninstalled iTunes 7 and Quicktime and tried again: nothing. I uninstalled everything and ran a third-party program called CCleaner to find registry entries that were not removed by the uninstallation and then reinstalled: nothing. Did all that and add a reboot after CCleaner before reinstalling: nothing. Downgraded back to iTunes 6.0.5 and it worked fine. Re-upgraded to iTunes 7, failure.
For those who may need it, you can download iTunes 6.0.5 from apple.com here: http://www.apple.com/support/downloads/itunes605forwindows.html

ITunes application could not be opened. An unknown error occurred (13014)

Ysterday I bought a brand spanking new Acer Aspire 7551 laptop with Windows 7 Home Premium and installed the latest version of iTunes (64 bit) on it.
I started iTunes with great anticipation because I so looked forward to syncing my iPhone with my Very Own Laptop.
Alas, iTunes did not start. Instead I received a message "the itunes application could not be opened. An unknown error occurred (13014)." Much Googling and reinstalling later the problem remains.
I have already deleted the genius files and rebooted several times. All to no avail. If anyone can propose a solution, I would be most grateful. Needless to say, I'd be happy to post any further info that can help to solve this problem.

Okay fixed my own problem. I don't know how or why, but it appears that I lost permissions for my iTunes folder in documents and settings. It took some messing with file permissions to get access to delete it, but I finally got it.
Once it was gone, no more issue. iTunes launched, created a new iTunes folder, and good as new.

'The itunes application could not be opened. an unknown error has occurred'

Could someone please help me, i recently had to restore my comouter to a previous date and due to this i had to reinstall a few programs along the way. Now unfortunatley itunes is not being co-operative, ive uninstalled it and then reinstalled with no luck. Each time i get to the end of the installation and tries to open up i get this message 'The itunes application could not be opened. an unknown error has occurred (-200)'
I would appreciate any help!
thank you

Could someone please help me, i recently had to
restore my comouter to a previous date and due to
this i had to reinstall a few programs along the way.
Now unfortunatley itunes is not being co-operative,
ive uninstalled it and then reinstalled with no
luck. Each time i get to the end of the installation
and tries to open up i get this message 'The itunes
application could not be opened. an unknown error
has occurred (-200)'
I would appreciate any help!
thank you
Ah not to worry i percievierd and managed to figure it out. Thanks to anyone that may have looked at my question!!

HELP! The itunes application could not be opened. An Unknown error occurred (13014).

a day or so ago my macbook 13in crashed in the middle of use, took several minutes to then reboot and now seems to be working fine except itunes will not open. when i try to open it a dialog box appears with the following message: "The itunes application could not be opened. an unknown error occured (13014).
I am running snow leopard, and it first appeared it was disk space but i checked my HD and it says there is 372GB available so i cant imagine its that.
I am by no means any sort of genius on here, so any help is beyond appreciated!

Redownload iTunes. ----> http://www.apple.com/itunes/download/
That should solve the problem

Please help, I am trying to download itunes onto my windows 7 32bit desktop, but keeps coming up with error message:This installation package could not be opened. Verify that the package exists. Any ideas on what im doing wrong

Please help
I am trying to download itunes on windows 7 32 bit, everytime I go to open download it comes up with a green screen then a error message.
This installation package could not be opened. Verify that the package exist.
Please help Me

Hi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy

Error ordinal 459 could not be opened. error occurs on every plug in install

Similar Messages

Maybe you are looking for