Error: org.omg.CORBA.Marshal

I installed the j2ee server on linux computers, and the deploytool on Windows computer.
if I try too deployment, wars I always these errors:
Error notifiying deployer of web component deployment org.omg.CORBA.Marshal

Hi Barbara,
i remember me, that i have problems with org.omg.CORBA.Marshal. I don't know, what you will do, but my problem was, that i use a deploytool from ibm (with ibm jdk) and want deploy the application under the sun jdk. It was (and is) not possible, why i use the ORB and this implementation is not the same in the jdks. I have experience with a client for ejb's over iiop.
Hope this help
Kuno

Similar Messages

  • Org.omg.CORBA.MARSHAL exception For JMX Notification

    I am running Weblogic 9.2 java version 1.5.0_04 and I am tring to recieve JMX Notifications from a Custom MBean running in Weblogic but I keep recieving the following exception:
    Jan 5, 2007 12:55:25 PM ClientNotifForwarder NotifFetcher-run
    SEVERE: Failed to fetch notification, stopping thread. Error is: java.rmi.MarshalException: CORBA MARSHAL 0 Maybe; nested exception is:
         org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: Maybe
    java.rmi.MarshalException: CORBA MARSHAL 0 Maybe; nested exception is:
         org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: Maybe
         at com.sun.corba.se.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:197)
         at javax.rmi.CORBA.Util.mapSystemException(Util.java:67)
         at org.omg.stub.javax.management.remote.rmi._RMIConnection_Stub.fetchNotifications(Unknown Source)
         at javax.management.remote.rmi.RMIConnector$RMINotifClient.fetchNotifs(RMIConnector.java:1285)
         at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.fetchNotifs(ClientNotifForwarder.java:508)
         at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.run(ClientNotifForwarder.java:399)
         at com.sun.jmx.remote.internal.ClientNotifForwarder$LinearExecutor$1.run(ClientNotifForwarder.java:83)
    Caused by: org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: Maybe
    I received this first by trying JConsole that comes with JDK 1.5. This only occurs with JMX Notifications because I am able to execute the MBean operation of the MBean and I can see my custome MBean being executed in WebLogic but my custom mbean sends out a JMX Notifications and that causes
    the above exception.
    I wrote my own NotificationListener program to make sure that it is not a JConsole problem and I got the same problem. I tried using t3 and rmi protocol to see if one of them would work but neither worked. See the code below for the Notification Listener:
              // String protocol = "t3";
              //String jndiroot = "/jndi/";
              String protocol = "rmi";
              String jndiroot = new String("/jndi/iiop://" + hostName + ":" + port + "/");
              String myserver = "weblogic.management.mbeanservers.domainruntime";
              JMXServiceURL serviceURL = null;
              try {
                   serviceURL = new JMXServiceURL(protocol, hostName, port, jndiroot + myserver);
              } catch (MalformedURLException e1) {
                   logger.debug("malformedURLexception caught");
                   e1.printStackTrace();
              Hashtable h = new Hashtable();
              h.put(Context.SECURITY_PRINCIPAL, userName);
              h.put(Context.SECURITY_CREDENTIALS, password);
              // h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote");
              try {
                   connector = JMXConnectorFactory.connect(serviceURL, h);
                   connection = connector.getMBeanServerConnection();
              } catch (IOException e1) {
                   e1.printStackTrace();
              logger.debug("The connection is : " + connection.toString());
              ObjectName mbeanName = null;
              try {
                   mbeanName = new ObjectName("Mbean:Name=com.test.bean,Type=TestMBean,Location=AdminServer");
                   logger.debug("Created MBeanObjectName: " + mbeanName.toString());
              } catch (MalformedObjectNameException e) {
                   e.printStackTrace();
              } catch (NullPointerException e) {
                   e.printStackTrace();
              try {
                   logger.debug("The mbean is registered " + connection.isRegistered(mbeanName));
              } catch (IOException e1) {
                   e1.printStackTrace();
              try {
                   connection.addNotificationListener(mbeanName, this,null, null);
                   logger.debug("the connection is added a listener : " + connection.isInstanceOf(mbeanName, "com.test.bean.MBean"));
                   logger.debug("Listener registered ...");
                   //Keeping the remote client active.
                   System.out.println("waiting for notifications, got to log file for details....");
                   System.in.read();
              } catch (InstanceNotFoundException e) {
                   e.printStackTrace();
              } catch (IOException e) {
                   e.printStackTrace();
              public void handleNotification(Notification n, Object arg1) {
                   logger.debug("******************************************");
                   logger.debug("* Notification count : " + counter++ + ", Notification received at "
                             + new Date().toString());
                   logger.debug("* type = " + n.getType());
                   logger.debug("* message = " + n.getMessage());
                   logger.debug("* source = " + n.getSource());
                   logger.debug("* seqNum = "
                             + Long.toString(n.getSequenceNumber()));
                   logger.debug("* timeStamp = " + new Date(n.getTimeStamp()));
                   logger.debug("* userData = " + n.getUserData());
                   logger.debug("*******************************************");
    I commented out the t3 protocol but it doesn't work for both protocol types. I implemented a Notification Listener within WebLogic and that
    worked right away using the following code below:
         InitialContext ctx = new InitialContext();
    rmbs = (MBeanServer) ctx.lookup("java:comp/env/jmx/runtime");
    As the document "Developing Custom Management Utilities with JMX" on page 4-7 "Make Local Connections to the Runtime MBean Server" described.
    Has anyone seem the above exception "Failed to fetch notification, stopping thread. Error is: java.rmi.MarshalException: CORBA MARSHAL 0" when a client is trying to receive JMX Notification? All help would be greatly appreciated.
    Thanks,
    Ajay

    Hi ajay,
    How did u manage to access the mbeanserver in BEA ? Can u pls brief on that. Even I am trying the same. But, the MBEANSERVEROBJECT i create, eventhough has NO NULL value, is not able to acces the mbean. Any method access through this object creates an EXCEPTION. Please help me too. I will try solving ur problem too.:-)
    Also, do i need to put my MBEAN CLASS in the weblogic server ? Should i create an APP SERVER in BEA ?
    I appreciate ur early response, dude..

  • HELP!! ::: org.omg.CORBA.MARSHAL

    When i call an ejb deplyed into oracle8i from my client i have
    got
    the following exception:
    ::: org.omg.CORBA.MARSHAL
    org.omg.CORBA.MARSHAL[completed=MAYBE]
    and i really don'r know how to manage that.
    regards
    Luca
    [email protected]
    null

    finally i have found the solution.
    you have to declare the serializable class :final
    bye
    luca landolfo (guest) wrote:
    : Thank you for your answer but i still got my problem.
    : The strangest thing is that if is the server(EJB on Oracle8i)
    : returning the class everything work fine but the opposite
    (Client
    : sending a serielizable object to the server). ???
    : Jose R. Daz (guest) wrote:
    : : Hello,
    : : It looks like an error mapping the objects beetwen JAVA
    and
    : : CORBA.
    : : Check if the objects you return as parameters are
    : serializable,
    : : and you return parameters by value (only in the return of
    the
    : : method).
    : : From Oracle 8i, we have several EJBs, returning objects
    : arrays
    : : and Vectors.
    : : Have you tried in OAS 408? We can3t do it because of the
    : same
    : : problem that you say.
    : : Jose R. Daz
    : : luca landolfo (guest) wrote:
    : : : When i call an ejb deplyed into oracle8i from my client i
    : have
    : : : got
    : : : the following exception:
    : : : ::: org.omg.CORBA.MARSHAL
    : : : org.omg.CORBA.MARSHAL[completed=MAYBE]
    : : : and i really don'r know how to manage that.
    : : : regards
    : : : Luca
    : : : [email protected]
    null

  • Error:org.omg.CORBA.INTERNAL:   minor code: 1398079697  completed: No

    When I run : j2ee -verbose.
    I get the following error:
    J2EE server listen port: 1050
    org.omg.CORBA.INTERNAL: minor code: 1398079697 completed: No
    at com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(GIOPImpl.java:
    256)
    I have include j2ee.jar in my classpath.What's wrong??

    the bin folder of j2sdkee has a file called setEnv. THe file has reference to the port 1060. I changed the port and it worked for me.

  • J2ee tutorial on Windows 98 - runclient error org.omg.CORBA:NO_PERMISSION

    I am using Win98...I have successfully run J2ee , deployement tool, and can run Web clients for the examples. However my runclient utility is giving errors.
    javax.naming.CommunicationException: org.omg.CORBA.NO_PERMISSION: minor code:
    0 completed: No
    at java.lang.Class.newInstance0(Native Method)
    at java.lang.Class.newInstance(Class.java:237)
    at com.sun.corba.ee.internal.iiop.messages.ReplyMessage_1_2.getSystemExc
    eption(ReplyMessage_1_2.java:93)
    I am enclosing the codes for my .bat files.
    J2EE.BAT FILE CONTENTS:
    @echo off
    rem
    rem Set JAVA_HOME and J2EE_HOME before running this script.
    rem
    rem set JAVA_HOME to the path where you have Java 2 (JDK1.2) installed.
    rem
    rem set J2EE_HOME to the path where you have installed this package (EJB server).
    rem
    if not "%J2EE_HOME%" == "" goto CONT0
    echo ERROR: Set J2EE_HOME before running this script.
    goto END
    :CONT0
    if EXIST "%J2EE_HOME%\bin\setenv.bat" goto CONT1
    echo ERROR: Set J2EE_HOME to the path of a valid j2sdkee.
    goto END
    :CONT1
    call %J2EE_HOME%\bin\setenv.bat
    if not "%JAVA_HOME%" == "" goto CONT2
    echo ERROR: Set JAVA_HOME before running this script.
    goto END
    :CONT2
    if EXIST "%JAVA_HOME%\bin\java.exe" goto CONT3
    echo ERROR: Set JAVA_HOME to the path of a valid jdk.
    goto END
    :CONT3
    rem @echo on
    rem for win98 %JAVACMD% %LISTEN_OPTIONS% -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter -Dorg.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl -Djms.home=%JMS_HOME% -Dcom.sun.jms.service.jdbc.dbpath=%JMS_DB_PATH% -Djms.properties=%J2EE_HOME%\config\jms_service.properties -Djava.security.policy==%J2EE_HOME%\lib\security\server.policy -Djava.security.auth.login.config=%J2EE_HOME%\lib\security\login.config -Dcom.sun.enterprise.home=%J2EE_HOME% -classpath %CPATH% com.sun.enterprise.server.J2EEServer %*
    @echo on
    %JAVACMD% -D%SSL_A%=%SSL_B% -D%JAAS_A%=%JAAS_B% -D%LISTEN_A%=%LISTEN_B% -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter -Dorg.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl -Djms.home=%JMS_HOME% -Dcom.sun.jms.service.jdbc.dbpath=%JMS_DB_PATH% -Djms.properties=%J2EE_HOME%\config\jms_service.properties -Djava.security.policy=%J2EE_HOME%\lib\security\server.policy -Djava.security.auth.login.config=%J2EE_HOME%\lib\security\login.config -Dcom.sun.enterprise.home=%J2EE_HOME% -classpath %CPATH% com.sun.enterprise.server.J2EEServer %
    cd c:\j2sdkee1.3\bin
    :END
    SETENV.BAT FILE CONTENTS:
    rem
    rem Set JAVA_HOME and J2EE_HOME before running this script.
    rem
    rem first include user-specified definitions.
    call %J2EE_HOME%\bin\userconfig.bat
    if "%JMS_HOME%" == "" set JMS_HOME=%J2EE_HOME%
    set LIBDIR=%J2EE_HOME%\lib
    set LOCALEDIR=%J2EE_HOME%\lib\locale
    set CLOUDSCAPE_INSTALL=%LIBDIR%\cloudscape
    set CLASSESDIR=%LIBDIR%\classes
    set JMS_CLASSESDIR=%JMS_HOME%\classes
    set J2EEJARS=%LIBDIR%\j2ee.jar
    set JAVATOOLS=%JAVA_HOME%\lib\tools.jar
    set JAVAHELPJARS=%LIBDIR%\jhall.jar
    rem JMS DB PATH must end in slash to specify a directory
    set JMS_DB_PATH=%J2EE_HOME%\repository\%COMPUTERNAME%\db\
    set SYSTEM_LIB_DIR=%LIBDIR%\system
    set JMS_RI_JDBC=%SYSTEM_LIB_DIR%\cloudscape.jar;%SYSTEM_LIB_DIR%\tools.jar
    set CLOUDJARS=%JMS_RI_JDBC%;%CLOUDSCAPE_INSTALL%\RmiJdbc.jar;%CLOUDSCAPE_INSTALL%\cloudclient.jar
    set CPATH=%CLOUDJARS%;%CLASSESDIR%;%JMS_CLASSESDIR%;%J2EEJARS%;%LOCALEDIR%;%J2EE_CLASSPATH%;%JAVATOOLS%;%JAVAHELPJARS%
    rem for win98 set JAAS_OPTIONS=-Djava.security.auth.policy=%J2EE_HOME%\lib\security\jaas.policy
    rem for win98 set SSL_OPTIONS=-Djavax.net.ssl.trustStore=%J2EE_HOME%\lib\security\cacerts.jks
    rem set LISTEN_OPTIONS=-Dcom.sun.CORBA.connection.ORBListenSocket=SSL:0,SSL_MUTUALAUTH:0,PERSISTENT_SSL:1060
    rem for win98 set JAVACMD=%JAVA_HOME%\bin\java -Xmx128m %SSL_OPTIONS% %JAAS_OPTIONS%
    set JAAS_A=java.security.auth.policy
    set JAAS_B=%J2EE_HOME%\lib\security\jaas.policy
    set SSL_A=javax.net.ssl.trustStore
    set SSL_B=%J2EE_HOME%\lib\security\cacerts.jks
    rem set LISTEN_A=-Dcom.sun.CORBA.connection.ORBListenSocket
    set LISTEN_A=com.sun.CORBA.connection.ORBSocketFactoryClass
    set LISTEN_B=SSL:0,SSL_MUTUALAUTH:0,PERSISTENT_SSL:1060
    @echo on
    set JAVACMD=%JAVA_HOME%\bin\java -Xmx128m
    RUNCLIENT.BAT FILE CONTENTS:
    @echo off
    rem
    rem Set JAVA_HOME and J2EE_HOME before running this script.
    rem
    rem set JAVA_HOME to the path where you have Java 2 (JDK1.2) installed.
    rem
    rem set J2EE_HOME to the path where you have installed this package (EJB server).
    rem
    if not "%J2EE_HOME%" == "" goto CONT0
    echo ERROR: Set J2EE_HOME before running this script.
    goto END
    :CONT0
    if EXIST "%J2EE_HOME%\bin\setenv.bat" goto CONT1
    echo ERROR: Set J2EE_HOME to the path of a valid j2sdkee.
    goto END
    :CONT1
    call %J2EE_HOME%\bin\setenv.bat
    if not "%JAVA_HOME%" == "" goto CONT2
    echo ERROR: Set JAVA_HOME before running this script.
    goto END
    :CONT2
    if EXIST "%JAVA_HOME%\bin\java.exe" goto CONT3
    echo ERROR: Set JAVA_HOME to the path of a valid jdk.
    goto END
    :CONT3
    @echo on
    %JAVACMD% -D%SSL_A%=%SSL_B% -D%JAAS_A%=%JAAS_B% -D%LISTEN_A%=%LISTEN_B% %VMARGS% -Djms.home=%JMS_HOME% -Djms.properties=%J2EE_HOME%\config\jms_client.properties -Djava.security.policy=%J2EE_HOME%\lib\security\client.policy -Djava.security.auth.login.config=%J2EE_HOME%\lib\security\login.config -Dcom.sun.enterprise.home=%J2EE_HOME% -classpath %CPATH%;%APPCPATH% com.sun.enterprise.appclient.Main %1 %2 %3 %4
    :END

    I am answering my own question, I have all the bat files to successfully run J2ee on windows 98. Mail me at [email protected]

  • NoClassDefFound org/omg/CORBA/UserException

    I am attempting to install IFS 1.0.8 for a new instance on a Unix server 2.7 that already has an existing IFS 1.0.8 install against another database.
    Following the creation of the second ORACLE_HOME, second instance, and the installing IFS, I attempt to run ifsconfig.
    During ifsconfig I consistently receive the error NoClassDefFound error: org/omg/CORBA/UserException
    This causes the ifs configuration to fail and therefore the successful install of IFS to fail.
    Please help !!
    null

    Did you do a custom install of the 816 Database? If so please try the following.
    If a "Custom" installation of Oracle 8.1.6 was done
    with no installation of the OEM components (or at least
    not all of them). Then the following is the minumum set of
    additional installations which must be performed in order to
    install the files which iFS depends on.
    Perform the following steps on your Unix machine where you have
    installed Oracle 8.1.6.
    - Verify that you the following files are NOT present in
    $ORACLE_HOME/lib (which causes the problem):
    + vbjorb.jar
    + vbjapp.jar
    + vbjtools.jar
    - Run the Oracle Universal Installer for 8.1.6 by executing
    ./RunInstaller from your Installation CD
    On the Available Products page, choose
    "Oracle8i Enterprise Edition 8.1.6.0.0", and select Next
    On the "Installation Types" Page, choose
    "Custom", and select Next
    On the "Available Product Components" page, choose
    "Oracle Enterprise Manager Products 8.1.6.0.0"
    "Oracle Enterprise Manager Client 2.1.0.0.0"
    "Oracle Enterprise Manager DBA Management Pack"
    You may deselect all other options, and select Next
    On the Summary page, verify that under "New Installations" is
    visigenics ORB 3.4" (among other items)
    Select "Install" to complete the installation
    After the installation is complete, verify that in your $ORACLE_HOME/lib
    the following files ARE present:
    + vbjorb.jar
    + vbjapp.jar
    + vbjtools.jar
    Rerun the Internet File System Configuration Assistant, by executing:
    $ORACLE_HOME/ifs/bin/ifsconfig
    Thank You.
    Brian

  • RROR : org.omg.CORBA.INITIALIZE: can't instantiate default ORB

    When a try to call stored procedure in java i have this error:
    ERROR : org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation
    com.sun.corba.se.internal.iiop.ORB minor code: 0 completed: No
    org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation
    com.sun.corba.se.internal.iiop.ORB minor code: 0 completed: No
    at org.omg.CORBA.ORB.create_impl(ORB.java)
    at org.omg.CORBA.ORB.init(ORB.java)
    at HelloClient.hola(HelloClient.java:31)

    Laurent,
    When are you getting this error ? Is this error coming from Oc4J or are you getting this error from JDeveloper 9i ?
    regards
    Debu Panda
    Oracle

  • Org.omg.CORBA.INV_OBJREF:   minor code: 1398079490  completed: No

    I have written a small application to interface with Domino server5.0 using IIOP. When I run the client application on HP UX using JDK 1.3.1.08, it works fine. When I deploy the client code within a OC4J container (version 9.0.3.0.0) the same code gives me the following error: org.omg.CORBA.INV_OBJREF: minor code: 1398079490 completed: No
    I am able to run this application with the client deployed in OC4J version 9.0.3.0.0 using JDK version 1.3.1_02 on a Win NT4.0 system.
    Any idea what's going wrong???
    Thanks in advance . . .
    Amitabh.

    I too have this problem with jdk1.3.1. Same code works fine with 1.2.2
    I am connecting TAO Trading service from Java Client.
    org.omg.CORBA.INV_OBJREF: minor code: 1398079490 completed: No
         at com.sun.corba.se.internal.core.CodeSetComponentInfo.read(CodeSetComponentInfo.java:95)
         at com.sun.corba.se.internal.core.Profile.<init>(Profile.java:114)
         at com.sun.corba.se.internal.core.IOR.getProfile(IOR.java:278)
         at com.sun.corba.se.internal.iiop.CDRInputStream.read_Object(CDRInputStream.java:592)
         at com.sun.corba.se.internal.iiop.CDRInputStream.read_Object(CDRInputStream.java:578)
         at com.sun.corba.se.internal.corba.TCUtility.unmarshalIn(TCUtility.java:222)
         at com.sun.corba.se.internal.corba.AnyImpl.read_value(AnyImpl.java:359)
         at com.sun.corba.se.internal.corba.RequestImpl.unmarshalParams(RequestImpl.java:403)
         at com.sun.corba.se.internal.corba.RequestImpl.doInvocation(RequestImpl.java:369)
         at com.sun.corba.se.internal.corba.RequestImpl.invoke(RequestImpl.java:223)
         at org.omg.CosNaming._NamingContextStub.resolve(_NamingContextStub.java:156)
         at TradingViewer.resolveRootNC(TradingViewer.java:72)
         at TradingViewer.<init>(TradingViewer.java:44)
         at TradingViewer.main(TradingViewer.java:39)

  • Why the stub throws org.omg.CORBA.TRANSACTION_ROLLEDBACK?

    Hi,
    I have a stateless session bean with a business method createAccount(). In the createAccount() implementation I call create() method on home interface of Account entity bean. I am using IBM Websphere and VisualAge3.5 environment. I have tested the Entity been in Isolation and account is created without any problems but when I try to achieve this via session bean, I get the following error:
    org.omg.CORBA.TRANSACTION_ROLLEDBACK
    Can anyone tell me how to correct this problem?
    Thanks,
    Sanjiv

    it seems you use JTS and database process has problem

  • Org.omg.CORBA.IDLEntity Marshalling

    I am using JDK 1.4 beta. I am working with 3 objects, one serializable object, one remote object, and one control object. The Control interface implements org.omg.CORBA.IDLEntity which implements Serializable.
    The way the objects are embedded is as follows:-
    Serializable object [ Remote object [Control object] ]
    Now i want to send across the serializable object to the client but i want to send the remote object stub. Therefore i need to override the way the object is written into the output stream. But I have found no documentation on how IDLEntity types are marshalled across. So i am looking on how to invoke this marshalling.
    Any help on this topic will be appreciated as i have been stuck on this for weeks now.
    Thanks

    Hi,
    Now i want to send across the serializable object to
    the client but i want to send the remote object stub.
    Therefore i need to override the way the object is
    written into the output stream. But I have found no
    documentation on how IDLEntity types are marshalled
    across. So i am looking on how to invoke this
    marshalling.I'm a little unclear about your situation. How can a Remote object contain the IDLEntity object? If you want to send the Remote object (which would be done by default serialization or a writeObject method on your Serializable), it would get sent basically as an IOR, right?
    More to your real question, though -- I believe an IDLEntity type is sent by the ORB by finding its Helper class and calling the write/read method. If you're programming in RMI-IIOP, though, and you're writing a class's writeObject method and you wish to send across an IDLEntity, you should still just call writeObject(<the object to send>) on the given ObjectOutputStream -- the ORB implementation should take care of finding and invoking on the Helper.
    - Everett

  • Unable to create reference: org.omg.CORBA.OBJ_ADAPTER

    What is causing this error? I believe it is a configuration error, but I cannot discern what it is.
    Setup:
    I have two beans: a User entity bean, and a UserWrapper stateful session bean.
    Execution:
    My testing client-code looks up the UserWrapper EJB and creates a new object. In the UserWrapper ejbCreate method I am attempting to obtain a reference to a specific User by looking up the User EJB and calling its findByPrimaryKey method.
    Everything works fine right up until the UserWrapper.ejbCreate method is ready to close; I catch this exception:
    RemoteException occurred in server thread; nested exception is:
    java.rmi.RemoteException: nested exception is: java.lang.RuntimeException:
    Unable to create reference org.omg.CORBA.OBJ_ADAPTER: vmcid: SUN minor code: 1015 completed: No;
    Observations:
    User.ejbFindByPrimaryKey(UserPK pk) is NOT throwing ANY EXCEPTIONS! The error is passed to UserWrapper.ejbCreate from the container, or so it seems, but I am relatively positive it is not orginiating from the finder method. At this time the User.ejbFindByPrimaryKey method only returns the primary key object.
    UserWrapper.ejbCreate code:
    public void ejbCreate(String usrnm, String pswrd) throws CreateException {
      // instance variables
      UserHome userHome = null;
      // implementation
      try {
        // obtain an instance of the EJBHomeFactory and have it return an
        // instance of the UserHome interface
        userHome = (UserHome)EJBHomeFactory.getInstance().lookup(
            "ejb/User", net.cmpro.app.entity.user.UserHome.class);
        // request the container supply a User object for the specified
        // primary key object
        this.user = userHome.findByPrimaryKey(new UserPK(usrnm, pswrd));
      catch(FinderException e) {
        throw new CreateException(e.toString());
      catch(RemoteException e) {
        throw new EJBException(e.toString(), e);
    }Need a little help here. I'm getting very frustrated because I've never had this problem before.
    Thanks for any advice, no matter how off the wall it is.

    Yes, it is. This returns an EJBHome object from a cache. I picked this up from the IBM website. It is very handy. The method in question is as follows:
    public EJBHome lookup(String jndi, Class home) throws EJBException {
      // instance variables
      EJBHome ejbHome = null;
      Object obj = null;
      // implementation
      try {
        // looks for the interface in the collection by class
        ejbHome = (EJBHome)interfaces.get(home);
        if(ejbHome == null) {
          // looks up the interface by its JNDI name
          obj = context.lookup(jndi);
          // casts the returned object into the interface desired
          ejbHome = (EJBHome)PortableRemoteObject.narrow(obj, home);
          // put the newly retreived interface into the collection and
          // list it by its class      never use the interfaces JNDI name
          // because a single EJB object could have multiple JNDI names
          interfaces.put(home, ejbHome);
      catch(ClassCastException e) {
        throw new EJBException(e.toString());
      catch(NamingException e) {
        throw new EJBException(e.toString(true), e);
      return ejbHome;
    }

  • Org.omg.CORBA.BAD_OPERATION:   vmcid: 0x2000  minor code: 2049  completed:

    Hi,
    I have a stupid CORBA error, can someone please help me to have a clue why this client gives me a hart time?
    Properties props = new Properties();
    props.put("org.omg.CORBA.ORBInitialPort", "1570");
    props.put("org.omg.CORBA.ORBInitialHost", "192.168.10.44");
    ORB orb = ORB.init(args, props);
    org.omg.CORBA.Object obj = orb.resolve_initial_references("NameService");
    NamingContextExt ctx = NamingContextExtHelper.narrow(obj);
    org.omg.CORBA.BAD_OPERATION: vmcid: 0x2000 minor code: 2049 completed: No
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(Unknown Source)
         at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_0.getSystemException(Unknown Source)
         at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(Unknown Source)
         at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(Unknown Source)
         at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(Unknown Source)
         at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(Unknown Source)
         at com.sun.corba.se.impl.resolver.BootstrapResolverImpl.invoke(Unknown Source)
         at com.sun.corba.se.impl.resolver.BootstrapResolverImpl.resolve(Unknown Source)
         at com.sun.corba.se.impl.resolver.CompositeResolverImpl.resolve(Unknown Source)
         at com.sun.corba.se.impl.resolver.CompositeResolverImpl.resolve(Unknown Source)
         at com.sun.corba.se.impl.resolver.CompositeResolverImpl.resolve(Unknown Source)
         at com.sun.corba.se.impl.orb.ORBImpl.resolve_initial_references(Unknown Source)

    I too have the same error my friend.
    I am trying to call a remote method of an entity bean when I get the same org.omg.CORBA.BAD_OPERATION message.

  • Org.omg.CORBA.NO_RESPONSE:   vmcid: 0x0  minor code: 0 completed: Maybe

    Hi,
    We are using a ejb to connect to corba server (tuxedo) at the backend , in most cases things are fine , but if the server takes more than 65 - 75 secs the above error occurs. The processing at the backend completes just fine ..
    We are not using network access points. I have tried setting the following properties to no avail
    IdleIIOPConnectionTimeout="300"
    CompleteIIOPMessageTimeout="300"
    The ejb is invoked via a jsp. The code snippet to invoke the corba server is as follows
                   //Use the factory finder to find the connection factory. Replace
                   // here with appropriate connection factory
                   org.omg.CORBA.Object connection_fact_oref = IIOPFactory.getFactoryFinder().find_one_factory_by_id(TxnConnectionFactoryHelper.id());
                   // Narrow the connection factory.
                   TxnConnectionFactory connection_factory_ref = TxnConnectionFactoryHelper.narrow(connection_fact_oref);
                   // Find the connection object.
                   TxnConnection connection = connection_factory_ref.getTxnConnection();
                   recv_buff = new byte[Constants.XML_BUFF_LEN];
                   //Prepare for the output
                   org.omg.CORBA.StringHolder buf = new org.omg.CORBA.StringHolder(new String(recv_buff));
                   //Invoke the neccessary method
                   TXNMON.MessageHolder msgHldr = new TXNMON.MessageHolder(new TXNMON.Message(sb));
                   int arrayLength = sb.length;
                   connection.sendByteMessage(arrayLength, msgHldr);
    Meanwhile we are trying to reduce the server processing time ...
    This is ruining my XMas, any help will be greatly appreciated.
    Thanks,
    George

    Sabarinath Kundoor <> writes:
    Are you using WTC? WTC connections should never be timed out. Its
    possible this is coming from the WTC layer, or maybe the gateway
    process is closing the connection. What version of WLS and Tux?
    andy
    Hi,
    We are using a ejb to connect to corba server (tuxedo) at the backend , in most cases things are fine , but if the server takes more than 65 - 75 secs the above error occurs. The processing at the backend completes just fine ..
    We are not using network access points. I have tried setting the following properties to no avail
    IdleIIOPConnectionTimeout="300"
    CompleteIIOPMessageTimeout="300"
    The ejb is invoked via a jsp. The code snippet to invoke the corba server is as follows
                   //Use the factory finder to find the connection factory. Replace
                   // here with appropriate connection factory
                   org.omg.CORBA.Object connection_fact_oref = IIOPFactory.getFactoryFinder().find_one_factory_by_id(TxnConnectionFactoryHelper.id());
                   // Narrow the connection factory.
                   TxnConnectionFactory connection_factory_ref = TxnConnectionFactoryHelper.narrow(connection_fact_oref);
                   // Find the connection object.
                   TxnConnection connection = connection_factory_ref.getTxnConnection();
                   recv_buff = new byte[Constants.XML_BUFF_LEN];
                   //Prepare for the output
                   org.omg.CORBA.StringHolder buf = new org.omg.CORBA.StringHolder(new String(recv_buff));
                   //Invoke the neccessary method
                   TXNMON.MessageHolder msgHldr = new TXNMON.MessageHolder(new TXNMON.Message(sb));
                   int arrayLength = sb.length;
                   connection.sendByteMessage(arrayLength, msgHldr);
    Meanwhile we are trying to reduce the server processing time ...
    This is ruining my XMas, any help will be greatly appreciated.
    Thanks,
    George

  • REP-50125: Caught exception: org.omg.CORBA.OBJECT_NOT_EXIST:   minor code:

    i have a problem with the users who request a report, the following error appears
    REP-50125: Caught exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
    i don have any idea, what it's mean. and sometimes only appears in some users, and others can execute the reports ok.
    please really i need some help

    Juan, we are having the same problem, and my cluster of 2 servers 9.0.2.2.
    I was explained by support, and they were explained by developers that this error is caused by the NULL instead of 0 returned parameter, when no engine available.
    This means if you hit refresh long enough it will work.
    I personally found this error happens when server's content in cluster is not in synch and just could not explain some other situations, our TAR is still open.
    Let me know where are you on this issue

  • Org.omg.CORBA.OBJ_ADAPTER

    Hi
    When i am trying to run my bmp application i am getting the following error. Please help.
    IOP5012 Unable to create reference org.omg.CORBA.OBJ_ADAPTER Sun minor code vmcid:1015....
    Regards,
    Nagaraju.KV

    hi,
    have you solde the problem I have the same.
    thanks

Maybe you are looking for

  • Apple ID couldn't be created because of a server error when i try to restore from a backup

    Apple ID couldn't be created because of a server error when i try to restore from a backup from iCloud? Also my mail works fine, and if i bypass everything and sign in tomy apple id in settings it will work!

  • Ram from G5 to intel

    Will extra ram from my iMac g5 work in the new intel imac i am planning to get? thanks.

  • Character Encoding in Crystal Reports

    Hi, We are using HTML character encoding to prevent SQL injection, i.e. when a special character like apostrophe (') is entered, it is saved as '. I wanted to know if we could manipulate the data in between the two operations of fetching the data fro

  • Text resizing in Captivate 7

    Hello, I have some Captivate projects that were built, I think in an earlier version than 7 (or I don't have the correct font installed?).  What is happening is that the caption text is larger than it should be and I need to reduce the size. Is there

  • How to map two fields to one field

    Hi, All, I have three datastore objects (three data fields): Year, term, and period key. Their relationship is like this: If year = 2010, term = '010', period key will be "1010".  In selection screen, I want users to input year (2010) and term (010),