Error original filter used for grahpics

Hi,
Since upgrading to FM10, we have been getting the following error message:
At least one original filter used for graphics imported by reference is not available, or the imported file's format has changed. An alternative filter may be used if the file is recognized as a grahpic FrameMaker can import.
None of the grahpics have changed and they all display. The only thing different is FM10 instead of FM9.
Any ideas on how to fix this probelm? Thanks!

That's more of an alert than an error.
We see it routinely when opening FM/Unix documents on FM/Windows.
It seems to have to do with the platform-specific <ImportHint ...> tags encoded after the <ImportObFile ...> (MIF examples).
None of the grahpics have changed and they all display.
Unless an imported object is rendered incorrectly, I wouldn't worry about it.
This is the first case I've heard of involving Windows to Windows migration, however.

Similar Messages

DCTDecode filter used for image with Indexed color space?

I've seen examples of images in PDF that have BitsPerComponent=8, with an Indexed Color Space, but the filter is DCTDecode. This doesn't seem intuitive to me, as JPG supports 24-bit RGB and 8-bit gray. I haven't heard of 8-bit color JPG so I'm just wondering how this is done?
I'm just trying to understand how this works if someone could please indulge me with a technical explanation it would be most appreciated. I understand how the image is represented using the colorspace, I just don't understand how this filter is applicable to 8-bit data.
Please note, I understand that it's not an actual JPG file, that the data is only using the compression scheme.

DCTDecode is entirely legal for 1-component (greyscale) samples as you've noted. There is no problem there.
Remember, that applying a filter (and later decoding it) is entirely separate from the meaning of the data. So it's possible to use filters that just don't map correctly to the data. For example, greyscale DCTDecode could be used to encode samples which were, on decoding, to be treated as RGB. It wouldn't compress well, but the meaning isn't affected.
But DCTDecode for an Indexed colour space is very unusual. Don't look for special treatment, it would be enconding the image data, which would be offsets into the colour table. And of course DCTDecode is lossy, so decompressed data should be close, but is not always equal, to the original.
In most cases of Indexed colour, this would lead to random and useless changes to colours. But it is entirely possible to have colours which map into a linear and smooth set of shades of the same colour - such as 256 shades of pink. An image using such an Indexed colour space is a candidate for using DCTDecode.
In using filters, it is best to forget what you think you know about the data, and just follow the precise rules of the filter.

IPhoto 6.0.6 throws up Error Message when used for the first time

After 7 months since having purchased my iMac I am using iPhoto for the first time. However, as soon as the iPhoto Library is created in the Pictures folder, about 30 seconds later, I get an Error Message stating "An error occurred while trying to save your photo library. Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
I have over 165GB on my hard disk. I have tried re-installing iLife 06 from the system disks that came in the box with my iMac. I have tried re-building the library by holding down the Option and Command keys when launching iPhoto. Nothing has helped so far.
I have tried calling the Apple support line, but after over an hour on the phone even he didnt know what the problem was.
Someone please help!
Gratefully yours,
DMEN

Dmen
The plist files simply record your user preferences for an application - your choice of default font, say, or the colour of the background, that sort of stuff. If this files is damaged or corrupted it can affect the app in all sorts of ways. When you trash it the app will create a new one when you next start it, and that will be the "factory defaults", but at least it will work.
To trash the fie:
Go to HD / Users / Your Name / Library / Preferences and find the com.apple.iphoto.plist fie, and put it in the trash.
Then start iPhoto.
Regards
TD

Error in BAPI used for QM02

Dear All ,
             I need to upload the Changes in QM02 , as per Sales Order Changes For that I am using Enhancement spot in VA02 and uploaded QM02 data using BAPI's :
1. BAPI_SERVNOT_ADD_DATA        - To add new line item
2. BAPI_SERVNOT_DEL_DATA         - To delete a Line item
3. BAPI_SERVNOT_MODIFY_DATA - To Modify the Data
But for all the three Bapi's I am getting One common Error Ie... ' Notification type Q1 not defined ' . Here I am modifying the Notification Numbers in QM02 that is of Type "Q1" Only . But even then I am getting this error. Can some one guide me to solve this Error . Or any other alternative solution for my Requirement .
Thanks and Regards
Syed Akbar

HI
Notification Type is Not Define Here. This has been Done By Configuration.
Try This........
http://help.sap.com/saphelp_46c/helpdata/en/44/158bb8dd3c11d29a520000e8a529f3/content.htm
Regards
Ajit

Original iphone used for itunes and now wont sync bc of no sim

HELP PLEASE. I had been using this iphone for itunes and decided to get all the pics off so did a restore. Now it won't let me do anything to it because there is no SIM card in it before. I could always hook it up and sync before but this time I did a restore and it won't do anything now that its erased. Please help

I'm thinking that your problem is not that it will not sync, it is that it will not activate. A SIM card is needed to activate the device. Getting the pictures off just required you to import the, not necessarily perform a restore, but now that you have done that, you need to activate the device. To do that, you will need a SIM. It does not have to be an active one. See this support document about using an iPhone without a wireless carrier. Using an iPhone without a wireless service plan

MM Brazil localization - Mat. origin field used for CFOP at client level

Hello All,
I'm currenctly participating in the implementation of Brazil.
I'm taking care of purchase module.
In the PO, you can find fields necessary to the correct determination of CFOP code. among this fields, you have "Origin".
This field indicates if the goods are provided from the same "tax area", from another "tax area" or from the country.
This field is populated from the material master wher you can find a field 'origin' but at client level.
Problem: how to handle a material bought from different vendor (one local, one outside the country?
I very surpised SAP didn't didn't include this field in the Info record. Does some of you already had this case ? how did you handled the situation ?
I was thinking to modify the logic for the population of the field at PO creation. that system is taking the value from a field stored in info record in priority (that would have to be created). How complex this enhancement could be ?
Thanks for any information !

Hi again,
I am not sure if this change was made already per other customers. I got a couple of messages regarding this subject per month, however is quite complicated. I understand how complicated would be double the materials. The feasible solution would be the split. Is not that complicated, I promise to you!!!
I do not know the points and where exactly the fields are retireved and possible changes points...I am sorry!
I will recomend to you, make lots of regressition tests after finish the deploy of your solution. This is very important, as I said for the Nota Fiscal and have some legal implications. I would work close with a brazilian fiscal law, in order to check the results in genarally: Calculation taxes, accounting documents, Nota Fiscal, CFOP determination, etc...
I would like to indicate this forum for you:
/community [original link is broken]
This is specific for Brazil localization subjects, such process, Nota Fiscal eletronica, etc....
however there, the whole comunication should be in portuguese.
The best regards

Query with SQL-SP gives error, if not used for few days

Hi All,
I have observed that if we do not use some of queries (which usage SQL SPs) for few days, then it stops working.
But when we go in SQL and execute the SP, the query in SAP starts working, without making any change either in query or the SQL-SP.
Can anybody throw light on this ? I guess it has some connection with SQL-SP behaviour.
Thanking you in advance ,
Samir Gandhi
Edited by: Rui Pereira on May 1, 2009 1:28 PM

Hi Gordon,
Please note the function of the SP is to bring selected data from tables, for example to bring Purchase details (I have copy pasted the SP at bottom of this message).
These are not SP_notif...
These SPs are called from the SBO query.
Once we execute the SP in SQL, then it starts working with SBO also.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER Procedure [dbo].[pGetPurchaseRegister]
     @StartDate datetime,
     @EndDate datetime
as
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[tmpPurchaseReg1]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
     drop table tmpPurchaseReg1
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[tmpPurchaseReg2]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
     drop table tmpPurchaseReg2
SELECT T1.LineNum,T0.DocNum AS 'Document Number', T0.DocDate AS 'Posting Date', T0.CardCode AS 'Vendor Code',
       T0.CardName AS 'Vendor Name', T0.NumAtCard as 'Vendor Ref. No', T0.VatSum AS 'Total Tax', T0.DocTotal AS 'Document Total' ,
       T1.AcctCode AS 'Account Code',T1.LineTotal AS 'Basic Amount', T1.ItemCode AS 'Item No.', T1.Dscription AS 'Item/Service Description',
       T2.SuppCatNum, T1.INMPrice AS 'Item Cost', T1.Quantity AS 'Quantity',T3.ItmsGrpNam AS'ItemGroup'
into tmpPurchaseReg1
FROM [dbo].[OPCH] T0
      INNER JOIN [dbo].[PCH1] T1 ON T1.DocEntry = T0.DocEntry
      INNER JOIN [dbo].[OITM] T2 ON T1.ItemCode = T2.ItemCode
      INNER JOIN [dbo].[OITB] T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod
      --WHERE T0.DocDate >= CONVERT(DATETIME, [%0], 112)   AND T0.DocDate <= CONVERT(DATETIME, [%1], 112)
     WHERE T0.DocDate >=@StartDate AND T0.DocDate <=@EndDate
ORDER BY T0.DocNum
select * into tmpPurchaseReg2 from tmpPurchaseReg1
declare @Total int
declare @TmpCardCode varchar(200)
declare @DocNum int
declare PurchseRegister_Cursor cursor LOCAL for
     select [Document Number] from tmpPurchaseReg1 group by [Document Number] having count([Document Number]) > 1 order by [Document Number]
open PurchseRegister_Cursor
                        fetch next from PurchseRegister_Cursor into @DocNum
                        while @@fetch_status = 0
                        begin
                                    begin
                            drop table tmpPurchaseRegTemp
                             select top 1 * into tmpPurchaseRegTemp from tmpPurchaseReg2 where [Document Number] = @DocNum
                         select @TmpCardCode =[LineNum] from tmpPurchaseRegTemp
                         update tmpPurchaseReg2 set [Vendor Name] = '',[Total Tax] = 0,[Document Total] = 0
                                               where [Document Number] = @DocNum and [LineNum] <> @TmpCardCode
                                    end
                                   fetch next from PurchseRegister_Cursor into @DocNum
                        end
close PurchseRegister_Cursor
deallocate PurchseRegister_Cursor
BR
Samir Gandhi

Idea: Time Machine errors could be used for telling people everything is OK

In the event of catastrophic good luck, abort.
Just a little levity for all those struggling with Time Machine.
Also, for those having "not enough space" errors on the initial backup, I found that if I excluded the two largest directories and let Time Machine do its thing, it didn't complain when those were taken off the exclusion list on subsequent backups.

Ok, this is getting ridiculous. Anyone else seeing this sort of behavior?
Message was edited by: irowboat

Firefox is having a problem with Linkedin. I get the error, error in parsing value for "backgroun" and for "filter"

When trying to send messages in linkedin, firefox takes me back to the log in screen without sending the message. On the error console it shows the error; error in parsing value for "background" and error in parsing value for "filter". What is causing this?

Pages does not support the Apple font used for color emoji, so that behavior is normal.
With what app are you reading the yahoo mail? There is really no guarantee than any other email service will show the special Apple font involved.
You should have no problem putting emoji directly into Mail or Text edit via drag drop from the Character Viewer as shown below.
You should also be able to upload graphics here easily by clicking on the camera icon. My email is tom at bluesky dot org.

Error 1603 - key invalid for use in specified stat...

cannot use skype, cannot re-install Skype
get: error 1603
and window stating: key invalid for use in specified state
Skype was working fine up to yesterday (Sept 15 2014)

ruwim escribió:
Try to uninstall Windows Security update KB2918614.
http://community.skype.com/t5/Windows-desktop-client/Error-Key-not-valid-for-use-in-specified-state/...
I personally whould not recommend that, because uninstalling the update KB2918614 places the Windows Installer service back to its original design, but also leaves it vulnerable to the reported security issue https://technet.microsoft.com/library/security/MS14-049
more info about this here: http://windowsitpro.com/security/bug-or-feature-kb2918614-alters-windows-installer-behavior
so, the right way to solve this this, is fixing user credentials and permissions, that could be corrupted by a virus.
1 - Reset File Permissions: http://www.tweaking.com/content/page/reset_file_permissions.html
2 - Reset Registry Permissions: http://www.tweaking.com/content/page/reset_registry_permissions.html
3 - Repair MSI (Windows Installer): http://www.tweaking.com/content/page/repair_msi_windows_installer.html
after that, you can try uninstall KB2918614 and then install KB2918614 again from Windows Update in Control Panel.

HT204053 I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

Welcome to the Apple community.
So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account.

I want to use my icloud email address as a new apple ID. It was an additional email contact address I originally set up for my child. But now, I'd like to set her up on Family Sharing, using that email as her ID. Obviously, when I try to use it wh

I want to use one of my icloud email addresses as a new apple ID. It was an additional email contact address I originally set up for my child. But now, I'd like to set her up on Family Sharing, using that email as her ID. Obviously, when I try to use it when setting up a new apple ID, it says the email is already being used (Yes, by ME) and I need to select a different one. Can I somehow delete that email address in order to set up a new apple ID using it? Or is there another way to "re-use" that address for my child's new ID?

"Well, then I want to be able to merge that one and the one my purchases are on..."
This is exactly what I want to do but don't think I can:
I noticed the following :
If you attempt to create an Apple ID which is the same as your @icloud email address from the online facility, it does not allow you (can't use an Apple associated email address as your Apple ID). However - if you start a fresh device - such as a new iPhone, iPad (must be mobile it seems), and then create an iCloud account and Apple ID from the prompts when setting up the mobile device, it IS possible to have your Apple ID and @iCloud email address as the same. I know because I just did it!
Unfortunately for me, the result I got above is not for one of my own ID's but a friends, and I would VERY much like to do the same - my current Apple ID is a completely different email address from my iCloud account. Trying to get them the same in my situation is a major bother - I think that if I wipe a device (such as an iPhone5 that is mine) and try to setup as I did my friend's device, then I will get a conflict because the iCloud email I have ALREADY exists. This is my worry and I will not attempt this until I get the new iPad 4 soon to test this.
There is an inconsistency here between the two methods of creating Apple ID's and iCloud accounts.
Overall in my opinion, the Apple ID system as currently available from Apple is not designed very well, and should be addressed.
Best wishes -

HT5621 Trying to change the email on my apple ID but get error message that the email I want to change to is already used for notifications. What do I do?

Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this. The email address is connected to my Ipad and Iphone for the email app, can that have anything to do with it?
If it makes any difference, I updated both my Ipad3 and Iphone4 to ios 7 today. I'm trying to change from my Macbook air though.
Please advise, would really appreciate a reply ASAP.

caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/

Error-No value given for one or more required parameters when using oleDBDa

Hello,
I have this sql statement and it works well, the Crystal Report gives good result when I put concrete values like:
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>='1001' And (NOVI.GBR)<='1080') AND ( ((NOVI.AB)='AK') OR ((NOVI.AB)='AK') ) AND ((NALOG1.DATA)<=#10/31/2011# and (NALOG1.DATA)>=#10/31/2011#) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
but when I use code like this :
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>=? And (NOVI.GBR)<=?) AND ( ((NOVI.AB)=?) OR ((NOVI.AB)=?) ) AND ((NALOG1.DATA)<=? and (NALOG1.DATA)>=?) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
Edited by: Don Williams on Nov 23, 2011 7:22 AM

and the code after that:
command.CommandText = comstring;
            if (radioButton4.Checked == true)
                if (textBox1.Text == "")
                    button1.Enabled = false;
                    MessageBox.Show("Внесете гаражен број", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    textBox1.Focus();
                    command.Parameters.AddWithValue("@gbr1", textBox1.Text);
                    command.Parameters.AddWithValue("@gbr2", textBox1.Text);
            else if (radioButton5.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1080");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton6.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1081");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton7.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else
                MessageBox.Show("Немате избрано гаражен број или тип на автобус.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                button1.Enabled = false;
            if (checkBox1.Checked == true && checkBox2.Checked==true)
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else if ((checkBox1.Checked == true) && (checkBox2.Checked == false))
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "AK");
                button1.Enabled = true;
            else if (checkBox2.Checked == true )
                command.Parameters.AddWithValue("@ab1", "GP");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else
                MessageBox.Show("Немате избрано автобаза.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = false;
            command.Parameters.AddWithValue("@data1", dateTimePicker1.Value.Date);
            command.Parameters.AddWithValue("@data2", dateTimePicker2.Value.Date);
             DataSet2 dataSet2=new DataSet2();
             OleDbDataAdapter oleDBDataAdapter1 = new OleDbDataAdapter();
            oleDBDataAdapter1.SelectCommand=command;
                dataSet2.Clear();
                oleDBDataAdapter1.Fill(dataSet2,"Tabela");
                if (dataSet2.Tabela.Count == 0)
                    MessageBox.Show("Nema podatoci za toj period");
                ReportDocument cryRpt = new ReportDocument();
                cryRpt.Load(@"C:\Potrosuvacka-Pregledi\Potrosuvacka-Pregledi\CrystalReport6.rpt");
            cryRpt.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperOrientation.Landscape;
                cryRpt.SetDataSource(dataSet2);
                crystalReportViewer1.DisplayToolbar=true;
            crystalReportViewer1.ReportSource = cryRpt;
            crystalReportViewer1.Refresh();
                conn.Close();
I get an error:
"No value given for one or more required parameters."
Could anybody help me please?
Thank you in advance.
Edited by: nelpet06 on Nov 23, 2011 9:30 AM

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Error original filter used for grahpics

Similar Messages

Maybe you are looking for