Error Out Of Memory Due to Digi Effects

Hello everyone, got a bit of a tricky situation to troubleshoot :/
Before you ask here's my iMac info http://gyazo.com/0648a1d03fb15935117894dd6716ffbc
Ok so the problem is, I'm making this video and its having a lot of distortion effects added to it within FCP 7 using the plugin Digi Effects Damage "Blockade". Now I had a sequence which had just enough memory to use it on all the clips I needed. However, I sent that sequence to Color and sent it back to FCP and in my new 'color sequence' I can watch the whole thing through in real time with safe RT and unlimited RT, however there is this colour http://gyazo.com/d022bf802fb82d76d191a004ddcbc387 above all the clips that have the plugin on.
Although I can watch it through in playback mode, when I render, after a few seconds it says Error: Out of memory.
Here are my general sequence settings http://gyazo.com/a270414e2c2d38cb1274f8f84f507383
I am using clips in the pro res 422 format. Any ideas? :/
-Bob

Hi
Out of memory use to refere to amount of
• RAM
• free Space on Start-Up (Mac OS) Hard Disk - VERY IMPORTANT
• Space availably on Hard Disk/s That holde the Movie Material
RAM
Never been a problem to me - 2 resp 5Gb dep on Mac used
Free Space on Boot HD
I never go under 25Gb free space - when working on SD-Video project's - I guess that 4 - 5 times more will be a safe level when doing HD. This space HAS TO be just here as Mac OS works like UNIX (it is in fact) and then produces lot's of temp. files that can not be stored elsewhere and so does FinalCut (or whatever application running)
Space to keep Movie Project
• Should be on other hard disks than the Boot HD.
• Should be as fast as possibly - RAIDed, FireWire or Thunderbolt - USB/USB2 performs badly to me and especially when filling up and when holding HD-material
• MUST BE - Mac OS Extended (hfs) formatted - this goes for all Video editing - iMovie, FinalCut or Adobe etc.
• This too can fill up - So this space is also important
What memory that are not sufficiant - is hard to guess - when You don't tell the above figure.
Good Luck in finding it
Yours Bengt W

Similar Messages

"AE Effects Error: out of memory rendering '55mmv7_MonoTint.plugin"

I am trying to export (using Quicktime Movie) a nested sequence when about 35% though the export it stops and gives me this error message:
"AE Effects Error: out of memory rendering '55mmv7_MonoTint.plugin"
The editor (i am only assistant) is using a filter package from Digital Film Tools, and they aren't in business any more. could it be that FCP 6 doesn't support these plugins?
Some of the clips in the sequence aren't rendered. Do they need to be rendered before exporting to Quicktime?
Some of the clips have a "Faux Film" filter on them but that's not the error that pops up.
Not sure what else to say.
Thanks for your help.

Turn off the effects that you suspect and try the render again. That would be a good place to start.

"Error: Out of Memory" when trying to Render

Hello all,
I'm editing a project in FCP 5 that is using, in part, .mpeg-4 videos downloaded from the internet. After several weeks on the project with things going fine, the downloaded videos can no longer render. I can see them in the source window, but when laid into the sequence these downloaded videos produce an "Error: Out of Memory" message. Other videos of this type that are already rendered and playing in the existing sequence cannot be re-rendered or adjusted without producing the same Error message.
A few things to remember...
1. Other types of rendering, such as filters and fit to fill effects, render just fine.
2. There is over 30 GBs on the external drive this project is running on.
3. I've tried resetting scratch disks, transferring the project to another drive, and opening it on a new, super-fast computer, and nothing is different.
Please help, I'm really stuck in the mud here and am dying to get past this issue,
Peace,
Sam

Did either of you find an answer? I'm running into the S A M E issues. I feel strongly that it has to do with the quicktime update, as editing mp4's worked FINE in January.
There is a lengthy protocol for trying to circumvent this issue:
http://discussions.apple.com/thread.jspa?threadID=1413028&tstart=0
Didn't work for me, but I think it worked for the query. And VLC (http://www.videolan.org/) ended up being the only program I can even VIEW mp4 in now properly.
So if you can use a viewer, that works.

Computer error - 'Out of Memory'

Hi all,
Company I edit for bought a new tower. Here are the specs
Processor Two 2.66GHz 6-Core Intel Xeon
RAM 12GB
Graphics Card ATI Radeon HD 5870 1GB
Yesterday was my first day on it, and all went fine until I started bringing render-heavy motion files into Final Cut. It would start rendering them, and then stop and say 'error -- out of memory'.
The internal drive has 800G of free space, but Just to be safe, I switched the scratch disc to an external with 400G of free space. Got the same error and message.
I also tried trashing preferences, repairing disc permissions and restarting. No luck.
I switched to my laptop (2.8 GHz Intel Core 2 Duo/4G Ram) and the sequence rendered just fine (if a little slow).
Any idea what's wrong? We bought the machine specifically for rendering and compressing, so this is pretty frustrating...

I've only run into this problem in a ProRes project, with clips transcoded from a Canon 7D. Other projects, using DVCPRO HD 1080, with lots of effects, haven't done this. What seems to help is 1. If you're using still files, make sure they're RGB and 72ppi; when I can I use jpgs rather than tiffs, and I think it helps to make them no larger than you need; 2. Close the sequence tabs you're not using, especially if they're psd still files; 3. Selectively render only the tracks at the top; 4. Save after every render.
If anyone has other ideas, please let us know. This really can be a pain.

"Error: out of memory" compiling JSPÂ´s

Our web application contains about 5000 JSPÂ´s and 900 java files and every time I want to make the project I get the message "Error: out of memory" compiling the JSPÂ´s despite already using the JVM option -Xmx850M to enlarge the heap size. It is not possible to use any higher value than 850M because this results in following error message launching JDeveloper.
D:\jdevj2ee1013\jdev\bin>jdev.exe
Error occurred during initialization of VM
Could not reserve enough space for object heap
The computer I use for development has 2GB of memory and JDeveloper is the only application running, therfor there must be enough memory available.
If I deactivate "Make Project before running" IÂ´m able to launch the application and debug JSPÂ´s, but every time a page is called itÂ´s recompiled, even if it has not changed, which costs a lot of time.
Is it possible to disable the JSP translation in the development process and only translate and compile the JSPÂ´s at request time in the embeded OC4J and make sure that this happens only once if the JSP has not changed?

I have solved the problem. I removed the transition, "Light Slice" from PulpFx. It was giving me trouble earlier. I don't know why, or if it's fixable and able to be used in the future, but I can render 100% after that effect is removed from the footage/sequence.

Getting Error Out Of Memory while importing the work repository in ODI 10g

I exported the work repository from topology of ODI 10g of one DB and tried importing it in the another ODI 10g topology of another DB.While importing i got the error 'Out of Memory' .
Can somebody suggest me ,how to solve the heap size out of memory issue while importing in ODI 10g.
Thanks in Advance.

Hi,
you have to post your question in ODI forum
Data Integrator
Suresh

Error message-----General error (34) Error : out of memory

Im trying to open a sequence & im getting an error message general error (34) Error out of memory
wont open sequence
any ideas

How much free space do you have on your scratch disk
What amount of RAM?
Read this thread:
http://discussions.apple.com/thread.jspa?messageID=1162802&#1162802

I'm getting an error Out of memory message when I try to render - There's lots of memory

I'm getting an error Out of memory message when I try to render - there's lots of memory and I've never gotten this before - any ideas?

Thanks - I did go through and change all the profiles to Apple RGB, there are several to choose - but I'm still having problems - I think it has to do with corrupt images - Im backing up and starting over - I've worked with images large and small for years and never had this problem - thanks

"Error: Out of memory" [not able to open timeline or videos in 'Viewer']

Hello all,
I am opening an old project from FCP 4 to Studio 1. The old system used a 'Cinewave' capture card. The new system is AJA Kona. I opened and changed timeline settings for many projects and they worked. This project the option fails. If I open a timeline this appears: "Error: Out of memory". The error also happens when I try to open video in the viewer. I noticed there are some videos in the SD 720x480 format that I am not able to open within FCP. Yet, I see them in Quicktime. I have saved the project with a new name in the current FCP format. All updates are current.
What is the diagnosis?
Thanks,
Jason

ummm....
I'll have to check that Monday. I'm actually at home. The problem is at the work computer.
I will check then and report back.
Please look if I need help then.
Thanks,
Jason

When I import the ppt, why do you always import error out of memory? Thank you!

When I import the ppt, why do you always import error out of memory? Thank you!

> We are getting an error (about the error - system say out of memory) and when we referred to the messages in the SAP BPC forum, few have provided solution asking to shrink the log file size.
> They have also provided the SQL synatx to reduce the log file size.
> " dbcc shrinkfile (Appset_Log, 1) " -
This is for Microsoft SQL Server, not for Oracle.
If you get "out of memory" it's not a database logfile problem but a memory problem.
> Exact Error message - out of memory (Pop-up screen - no other information available)
When is this happening?
And do not post the same question in different forums:
SAP BPC Netweaver and error message (SQL)
Markus

Fatal Error:Out Of Memory

Hello
I have problem in JDev 10.1.3.3.0
My Project is using BC4J framework ,and while running my application in debug mode i have got the Fatal Error:Out of Memory.
But when i start my application in normal Run mode its running fine..
can any one help me out...
Thanks..

when i had done some googling i found the bug list of Jdev 10.1.3.3.0 i found this.. but wht to do with this ?..
http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.4/10134fixlist.html
Category Bug Number Base Bug Title
BC4J DT 6262615 5854143 MIGRATION OF A 9.0.5.2-.10.1.3.1. PROJECT HANGS/ THROWS OUTOFMEMORY ERROR

Error out of memory when opening an edited sequence

Don't know if this is any use I was attempting to open a hour long sequence in fcp
(I'm only on 6.05 but anyway....) I kept on getting an error out of memory. I did the obvious things opened a new project and put the sequence in it didn't work. Eventually I found that if you open a new sequence and drop the one that won't open into it (this will nest it) and then double click on the nested sequence it will open the original sequence without a memory issue....
Sloppy bit of code there somewhere!!!
Justin

After updating to FCP 703 and osx 10.6.4 a lot of Memory issue has been solved.

Error: out of memory during render

Hi,
I am attempting to write a non-self contained quicktime movie from a sequence in FCP 6.03. The sequence was originally edited in AIC 720p, then onlined to 8 bit uncompressed via the .m2v files.
When rendering I receive an "error: out of memory" message.
I am wondering what might have caused this, as I have not experienced it before. I have done a search within mac forums, but none of the threads I found seemed to address my specific issue.
Any thoughts??
Thanks,
-Tom

Onlined to 8 bit uncompressed SD? or HD?
You likely have a corrupted media file involved. It's usually the same percentage in from the head of the sequence, as the failure is reported... i.e, the failure is reported after 50% complete? then look half way into your sequence, and re create or re capture that area of the sequence.
Jerry

Render - Error: Out of Memory

I have been getting the following error message while trying to render - Error: Out of Memory.
The system I am working on has 10 gigs of RAM and is connected to a SAN with a whole lots of storage. The error message doesn't appear until almost the end of a render, which is of itself very annoying. Anyone know why this is happening? If I restart the application I am OK for a while then it happens again.

If you really want me to hold your hand I will. Here's some links that came up when I typed "Out of Memory"
http://discussions.apple.com/thread.jspa?messageID=7490395&#7490395
http://discussions.apple.com/thread.jspa?messageID=7376550&#7376550
http://discussions.apple.com/thread.jspa?messageID=7480220&#7480220
http://discussions.apple.com/thread.jspa?messageID=7756170&#7756170
If you still don't find what you need post back and there's a few other things you can try.
FYI- No need to be a smart a$$ to someone trying to help you.

Final_cut_pro-"Error: out of memory" when rendering with hidef clips

I keep getting this notice when rendering "error: out of memory." Both my external drive and internal drive have plenty of memory; 1.8TB and 101GB respectively. It makes no difference if I am rendering at full resolution or draft. I solved it for a while by clearing out some memory on my internal harddrive,
but now it is back. What is going on. This didn't happen when I was working with regular definition clips but now I am working with high def. What to do?

Drives don't have 'memory' in this context, they are storage containers.
Check my answer to your other thread and give us more info about your rig...Hardware/Software (models/versions), how everything's connected, exact specifications of the media you're working with and sequence settings.
K

Error Out Of Memory Due to Digi Effects

Similar Messages

Maybe you are looking for