Error out problems with measuring frequency VI

I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
Attachments:
Measure Frequency VI error.vi ‏27 KB

This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Similar Messages

I am not able to open iCloud from pc, error is "problem with the server". what should I do?

I am not able to open iCloud from pc, error is "problem with the server". what should I do?

Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes. You will then be able to access Settings>iCloud again.

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

Error "DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"

Hi Friends,
I got the following message when am trying to delete the setup tables.
" Error DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
Am trying to delete the setup tables for application '11', but it gives me the above error. I have gone throug similar threads but it did not solve my issue.
Please can anyone provide a solution.
system detials:
R/3 release    - 4.6c
PI                 - 2004_1_46c
SAP_BW      - 30B
PI_BASIS     - 2003_1_620
Any information will be appreciated
Thanks,
VBR

Hi Kishor,
Thanks for your reply.
I have gone through that SAP Note 456102 and it was not of much help for our issue because we are ahead of PI that is mentioned in the note.
Can you send your email id so that i can forward the error screenshots.
Regards,
VBR

How can I synch my iTunes? If often says unknown error or problem with application?

I have problems synching my iPhones 4s with my MAcbook pro (10.8.2) and iTunes (11.0.1). I can connect my iphone 4s(6.0.1) directly to my macbook pro or via the same network. I can start the synch via itunes or my phone. 20% of the time it works. If often says unknown error or problem with application. The software is up to date. What can I try? Thank you

The iphone/ipod is NOT a storage/backup device. Not maintaining a backup copy is a big mistake.
You can transfer itunes purchases from your iphone/ipod to your computer:
Authorize your computer for all accounts and then click File>Transfer Purchases

Can't figure out problem with new PC

Hi all, I just built my first PC and everything's running pretty well with the exception of some lag and freezing. My mouse and keyboard sometimes lag behind my true movement. The mouse does this more often and will lag behind for a second before it catches up to my true movement. Also, the system has occasionally frozen with the image still on the screen (no blue screens). Finally, when trying to play music, the audio will skip out every 10 or 12 seconds. Otherwise, the system is working fine... I've been burning DVDs with it and programs run fine on it.
I'm thinking that it has something to do with the RAM. Here is what I've done so far: I have all the newest drivers from MSI and Sapphire. I've tried running the system with each of the 512MB modules by themselves. I've also tried putting them in different DIMM slots. Any features in the BIOS that may slow the system have been disabled. The system runs right around 37C for CPU and 42C for the system, so overheating is not an issue. The RAM isn't getting too hot because the system is slow right from a cold boot. I've done memtest and it has showed the RAM to be good. I also ran CPU-Z and the memory specs are below. Does anyone have suggestions as to the cause of these problems and how to fix them? Thanks in advance for the help!
CPU-Z memory specs:
CPU-Z version 1.22
Memory Modules Serial Presence Detect (SPD)
Module #1
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      K
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8
Module #2
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Infineon (C1494E46494E454F)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      64D64320GU5B
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8

I now have all my programs loaded back on and all the drivers loaded and still have no problems with lagging or audio skipping. I did not install any of the Promise drivers this time. All I installed was the via driver necessary for installing windows xp at the "F6" menu. I also did not install all of the MSI utilities, etc. this time. SO all I can think of is that the problem lied in the promise drivers or some of the MSI utilities. The PS is running all of my drives fine as of right now. Regardless, I'm up and running good, so I'm happy. I hope this helps someone else.
Also... has anyone had problems with the Realtek ethernet adapter? My comp. gives me a "network location no longer available" error every time I try to copy files over the network from my other computer. I haven't seen anyone else with this error or found how to fix it. I have file sharing enabled, the windows firewall is not on, TCP/IP is installed along with client for Microsoft networks. They're all in the same workgroup also. I can connect to the Internet and the connection seems to be set up properly. I think that covers everything I've checked...

ERROR 1721, problem with windows installer package

i have windows vista basic on a acer aspire 5535, itunes has always worked on my laptop until apple asked me if i wanted to update so i did (i believe the update was for itunes 9/9.2) after this update i am unable to install itunes and get the error 1721 message saying
There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support or package vendor.
i have tried EVERYTHING that i have found on the internet about this, i mean everything and i am ready to give up! does anyone know how to fix this? its so frustrating as i need itunes and i know it once did work on my laptop.
i've tried command prompts, registry cleaners.. the works.
please help!?

Hi,
I like many others choose to update to itunes 10. Straight after installing the software itunes was not working. :s I was annoyed! So follow a message board followed the instructions. Uninstalled it complete, out of Program files everywhere even downloaded a really good uni-installer program to clean everythin up.
Now Quick Time 7.6 installs. iTunes 10 gets all the way to the end then you get a error message: "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."
Somebody please help me my life is dull with out the constant flow of new music onto my ipod. :((

5700 TV-OUT problem with colours

Hi!!! I'm trying to fix the problem with my vga, but I could not get it fixed... The problem is that sice yesterday the colours in TV-Out mode is wrong, it appears that is on iverse colours, but I cannot change it. I had already reinstaled the nVidia 56.72 driver, reinstaled Windows XP SP1, and didn't work. Earlier today, I tried to connect the composite video cable and get the right colours, but just before I connected the S-Video again to check if the colours was right as composite, but for my sadness, it wasn't. Then I reconnected the composite and the colours was worg that out too, now the two TV-Outs, composite and S-Video are with the wrog colours... I don't know what else to do... help me!!!
Thank you anyway.

Hi,
Try changing the TV standard. Brazil uses a less common PAL-M standard, which uses NTSC line and field rates (525 lines,60 fields/sec) and a unique colour subcarrier frequency, which is close to the standard NTSC frequency. For more details on TV standards, look here.
You might have to experiment to find the combination which works best with your TV set.
Cheers

8900 printer changed black cart. error code problem with printer system

Changed black cartridge in 8900 series all in one printer error message says trouble with print system call HP. Have removed and reinstalled catridge still same error message. HELP!!!!!

Hi @melvinc
Welcome to the forums
I read about the issue you are facing on your printer, as it's now showing a problem with the ink system. I cannot locate a "8900" printer, could you possibly have the Officejet 8600? If so, please try out the steps from the guide below. If you reach a step where it asks to replace the printhead or printer, call us directly to see what your replacement options are with HP.
A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Qosmio G20 error message: problem with cooling system has been detected

I am attempting to fix a Qosmio G20 (which is about 3 years old, so no longer in warranty).
The error message is: Warning: A problem with the cooling system has been detected.
I have managed to remove the outer case and observe the machine working, and basically one of the fans is not operating at all. The fan which is nearest to the power connector seems to be working fine (it seems to spin quite a lot, dont know if this is normal), it is the other fan which does not seem to move at all.
When I reattached the case and switched the machine on I noticed after a few minutes that the heatsink vent of the working fan got quite warm, whereas the vent of the non-working fan stayed cool.
I have cleaned the fan of dust and have also altered the BIOS to battery mode from high performance mode, but still the problem exists.
I would be grateful if someone could advise whether the problem is the fan or something else.
If the fan is the problem, where can I buy one from (I live in the UK)?

Hi
In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
Usually this should be done by an authorized service provider (ASP) in your country.
The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
Therefore contact the ASP in your country and ask for the further handling!!!
By the way; you can purchase the cooling module also from the ASP!!!
Good luck

Video out problem with Dynex 32" 720p TV

Hi folks. I bought my new Dynex TV a few days before New Years. It's great, really sharp, and I've had no problems with it. However, I do have a DVD recorder so I can record my games. Tonight, I attempted to use the A/V output on my TV and connected them to my DVD recorder (which plugs into my computer). I clicked "capture" and got an error telling me that a connection could not be established and that I should double check my cables. I could hear the audio playing through my laptop speakers just fine. I couldn't see the video, for some reason .
It's not the cables, I just took them off of my old TV to use them here.
What can I do? Should I return my TV?

What about output from a gaming console, like a PS3? Is that only digital sources or does it matter how the PS3 is connected to the television to determine if's its a digital or analog signal? Right now I get no output when I try to send the video of my PS3 to my composite video in on my computer's TV tuner card.

I am getting an error encountered problem with the display driver for my Photoshop CS5 extended

I have Windows 7 and have used CS5 extended with no problems for quite a while now.
Last week I started up CS5 and received the error:
"Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
"Please close program and uninstall and re-install if problem persists"
I was able to edit, however when I went to save my work it would not do so. The following error came up.
"Could not complete the command because the extension could not be loaded"
"Could not save a copy as .....because of a program error"
I checked to make sure I have the latest driver, I also uninstalled and re-installed the program and I am still getting the errors.
Can anyone help with this?

Error 1402 | Error 1406 | Acrobat, Reader

59000XT 128-VTD TV-Out problem with video.

I have the MSI GeForce 5900XT-VTD128. I´m using the TV-Out funktion and I clone my primary desktop. It all works fine to show the desktop on my TV. But when I try to play a Quicktime Movie in Quicktime it dosen´t work. It is the same problem with Windows media player.
I get a good picture on my primary screen but I get a "black" picture on my TV.
Ex. if I run windows Media player and starts an MPEG and I run Windows media player not maximized. On my primary screen I can se the Video beeing playd. But on my TV I only see Windows media player but I don´t see the move bieng played. It is just black. The same thing hapens in Quicktime. I Can't see video on my TV.
what could be my problem?
I´m using the latest drivers, (Have tested with Nvidias latest to but i´m now back to MSI 61.77)

Thanx.
That worket for me!
/Best regards
Sven Hagström

IPod Touch 2nd Gen Video Out Problem with Apple Component Cable

I'm trying to get video out working with my iPod touch connected to my TV. Here's the information.
32 GB iPod Touch 2nd Gen
Apple Universal Dock (current version.)
Apple Component Out cable for iPod (current version that connects with a dock connector.
I've connected the component cables into the component video input on my TV. When I start playing any video (purchased off iTunes store in Standard Def,) I get a scrambled picture that appears to be the video, and no sound. I purchased the TV in South Korea and haven't gotten to test it yet on a TV back in the US. I have my video out settings with wide screen turned off and set to NTSC (South Korea uses NTSC.) I've also tried every setting combination, and switching the cable connections with the same or similar results. Sorry if a similar problem has been posted elsewhere, but after searching, I couldn't find any similar behavior. Any ideas on what might be the cause? I don't have any other component devices to check if the component on the TV is bad.

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Error out problems with measuring frequency VI

Similar Messages

Maybe you are looking for