Error: Outlook could not create the work file. Office 2013

I was having issues with Windows 8.1 store apps not working and it was suggested to sync my account licenses. I did that but it did not correct my problem. I then ran the troubleshooter app. The troubleshooter found several issues that it
fixed but I cannot remember what they were.
So here's my problem. Now, when I open Outlook (2013) I get the error "Outlook could not create the work file."
Any suggestions?

Glad to hear that you have found a solution and thank you for sharing it here, it will be helpful to other community members who have same questions.
Cheers,
Steve Fan
TechNet Community Support

Similar Messages

MS Office 2004 reports "Word could not create the work file."

I have searched the world for the solution and apparently nobody else has this problem. When opening any document (.doc) Word will report "Word could not create the work file. Check the amount of disk space on your start up drive."
There are 40 gigs free. There is 2 gig of memory. It's the only app open.
Is there a solution to this problem other then not using Word at all?

I'm learning more about the doc file in question.
Evidently it was created on Windows about 4 years
ago. If I Save As... the file and click the
Compatibility button it complains about a missing
"linked" file. While this might be the cause of the
problem there doesn't seem to be any way of fixing it
short of finding a time machine and wacking the
creator before they wrote a word. If I go ahead and
save the document Word crashes and corrupts the
original file (err the back up of the back up of the
original file).
I think you may have to give up on this one.
A "linked file" is a reference pointer within the main word document that tells word to locate another file and incorporate it into the document by reference (but not include the actual contents of the linked file)
Since you say "If I Save As... the file and click the Compatibility button..." you can get into the document.
So try turning on invisibles, and find the reference to the linked file. You may also be able to find it by turning on Document Map.
Delete the link, and that should take care of the crashing problem.
Of course, your file will not be 'complete' but thats a differnet problem.

SAP MMC error - MMC Could not create the snap in

I installed 3 new instances on a new server, and i get the following errors.
MMC Could not create the snap-in
MMC could not create the snap-in, the snap-in might not have been installed correctly.
Name SAP System Manager
CLSID: {633547ee-A302-11D1-Ae59-080009b07dbb}
Any Ideals.

Hi,
I got the exactly the same error. I installed GUI 7.10, and I installed the latest MMC but during installation of MMC was prompted that current version is allready newer.
Do you got some more specific answer on how did you solve this issue?
Thanks!
Best regards,
Jacco Raymakers.

Nvidia Input/Output error. Could not open the device file /dev/nvidia0

Hello, I finally have Arch running on my MacBook pro 3,1 (mid 2007) but when I startx after installing Nvidia drivers it gives the Input/Output error and states "could not open device file /dev/nvidia0." I tried everything from the Nvidia wiki, and nothing seems to work. Does anyone please have any other ideas or things to try? My Nvidia card is 8600M GT and I have installed xorg-server, xorg-apps and Nvidia-utils already. Also is it possible my graphics card is not compatiable with this new kernel? Thank you for your time.

You know that this posts a huge list - and I couldnt remember how to trim for certain keywords (which one would you be interested in?).
So here the last few things regarding Video: from dmesg:
[..] nvidia: module license "NVIDIA" taints kernel.
[..] Disabling lock debugging due to kernel taint.
[..] nvidia 0000:01:00.0: enabling device (0002 -> 0003)
[..] vgaarb device changed decodes: PCI:0000:01:00.0,oldcodes=io+mem,decodes=none:owns=none
[..] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.37 Wed Aug 8 19:52:48 PDT 2012
then comes Swap, wlan, eth0 etc..

Need Help! "Could not locate the resource file in the Configuration folder."

I had just purchased and installed Adobe Crerative Design Suite last night. Every program works except Dreamweaver, which gives me the error message:"Could not locate the resource file in the Configuration folder. This File is required to run Dreamweaver. Please reinstall the application". I am suspicious because the was a previous version of Dreamweaver on the computer before this installation, but I unistalled it. I do not understand why I get this message. Is there a file somewhere that is missing or at faut. How can I remedy this? Thanks
~Todd

Nadia,
Your posted resources worked for me. Thank you! After many attempts (to include Adobe's overseas call canter) to resolve the same installation and run errors, I used your suggested steps and I finally have a clean and running install. I did have to take a few extra steps;
First I downloaded both Cleaning scripts. For CS4 & CS3.
Next I downloaded Windows installer/cleaner. I have Windows Vista Home Premium and that is a required installed program to run Adobe's cleaning script.
Once I was sure I had all the programs/scripts I needed (per your instructions and the instructions found on the Cleaning scripts site) I disconnected my computer from the Internet.
Then I disabled all running programs especially all Anti-virus and firewall programs and any others that have calls of any kind: i.e. Boinc (Seti), Skype, email programs (Windows Live Mail), etc.
Next I uninstalled all CS4 products and even though I was told that Macromedia Studio MX 2004 can stay installed (read that on one site and the overseas Tech also reinforced that information) I uninstalled MX 2004.
I then rebooted and installed the Windows installer/cleaner program and ran the Adobe CS4 cleaner script twice.
After another reboot I installed Dreamweaver CS4 first, rebooted (can't reboot enough with Windows!) and, yes you guessed it, rebooted.
I then attempted to open Dreamweaver CS4 and for the first time it ran without the error!
I then installed Adobe Ps CS4 and rebooted and that work for the first time as well.
I can't say for sure if Macromedia Studio MX 2004 caused the install errors on the Adobe products but without it and ALL that uninstalling and rebooting and running cleaning scripts and installing and rebooting, Adobe finally felt my computer was clean enough to call it home and work.
Thank you again for your information and I suggest if anyone else finds their way here that they follow your instructions to the letter. Takes a long time but a proper and clean install will be the result.

"Could not create the Java Virtual Machine" while running javaw -p

Hi All,
I have installed the JDK in system. After installing when I run javaw -p i am getting below error.
"Could not create the Java Virtual Machine"?. Can any one please help me?. I tried two or three times?. Due to that I am not able to use tools to write Java Code?
Please provide your helps.
Thanks
Thamayanthi

Windows XP, I have checked the path variable also, see
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\PROGRA~1\IBM\SQLLIB\BIN;C:\PROGRA~1\IBM\SQLLIB\FUNCTION;C:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;%JAVA_HOME%\bin;%ANT_HOME%\bin;C:\Program Files\QuickTime\QTSystem\;
JAVA_HOME = C:\Program Files\Java
Eclipse : Eclipse with Jboss
Any other thing I missing?
Where I can check from where eclipse is taking Java?
Thanks

Glom – Could not create the new database

I would like to try Glom, but always get the this error
"Glom could not create the new database. Maybe you do not have the necessary access rights. Please contact your system administrator."
This happens with both local and extern server configuration. Any ideas on how to fix this?
Regards,
Renke

It would also help, if you install the application and just tell me, if you get the same error, when trying to create a database. Maybe it's just a problem on my side.
Regards,
Renke

MMC could not create the snap-in Event Viewer

when I try to invoke the event viewer in Vista I get the following error:
MMC could not create the snap-in.
Name: Event Viewer
CLSID: FX:{b05566ad-fe9c-7a4cbb7cb510}
I am having this problem. All of the information I find is one or two years old. I have seen several queries about it but never a complete solution posted.
I was wondering if anyone knew how to fix this problem
Thanks

Looks like I found easier way for my Windows 7 Home Premium.
http://social.technet.microsoft.com/Forums/windows/en-US/fb6e124e-4f9c-4873-b2e4-e229e144f1dc/mmc-could-not-create-snapin?prof=required
"I
have removed the [HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MMC \ SnapIns \ FX:{b05566ad-fe9c-4363-BE05-7a4cbb7cb510}
key (after
exporting it).
" thanks to Tom
No need to replace .NET, No need to delete machine.config.

LocalSecurityPolicy Showing MMC Could not create the snap-in

Hi All
When I click on Local Security Policy in Hyperion environment its showing below error:
MMC Could not create the snap-in
MMC Could not create the snap-in. The snap-in might not have been installed correctly.
Name: Group Policy Object Editor
CLSID:{8FC0B734-A9E1-11D1-A7D3-0000F87571E3}
regards
Smilee

Hi All
When I click on Local Security Policy in Hyperion environment its showing below error:
MMC Could not create the snap-in
MMC Could not create the snap-in. The snap-in might not have been installed correctly.
Name: Group Policy Object Editor
CLSID:{8FC0B734-A9E1-11D1-A7D3-0000F87571E3}
regards
Smilee

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

Getting error message "Could not create work area" when I open Bridge CC.

I am getting an error message "Could not create work area" when I open Bridge CC.
I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

I am experiencing the same problem!
My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

Agent Process Throws Error - Could not create the Java virtual machine

We are trying to run a WAN test but the server which hosts required SW is kind of older version
OATS controller version installed is 9.3
Agent version same 9.3 v27628
Java version its showing for 9.3 is - 6.0_24
I got this error message on Agent machine
Your CPU does not support the SSE2 instruction set required to run JRockit.
INFO | jvm 5 | 2011/11/11 10:44:11 | Could not create the Java virtual machine.
ERROR | wrapper | 2011/11/11 10:44:11 | JVM exited while loading the application.
FATAL | wrapper | 2011/11/11 10:44:11 | There were 5 failed launches in a row, each lasting less than 300 seconds. Giving up.
FATAL | wrapper | 2011/11/11 10:44:11 | There may be a configuration problem: please check the logs.
STATUS | wrapper | 2011/11/11 10:44:11 | <-- Wrapper Stopped
The Agent machine details are
Intel Pentium III
1.4Ghz , 2.00GB RAM
Windows server 2003
Can you please tell me if this server is not compatible for running version 9.3.
Or let me know what other problem you see.. I will check the user guide to check compatibility too.
Thanks for looking.

Where do i change the path.. i change it in config file in anget manager folder.
then Agent process started working.. but as we try to test it its still pointing to JRockit thing
can u please tell me where should we set the path.. only in config file or there are env entires too?
Thanks

Could not create the Java virtual machine error during installation

Hi,
We are doing an ERP 2005 Installation on AIX 5.2 ML08 with DB2 as the
database.During "Import ABAP" Phase of the installation we are getting
the below error.
========================================================================ERROR 2007-03-12 13:35:30
CJS-30022 Program 'Migration Monitor' exits with error code 1. For
details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-12 13:35:30
FCO-00011 The step runMigrationMonitor with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was
executed with status ERROR .
========================================================================
In "import_monitor.java.log" below entries are there
Unrecognized option: -Xj9
JVMCI119: Error parsing IBM_JAVA_OPTIONS java options - rc=-6
Could not create the Java virtual machine.
Usage: java [-options] class [args...]
(to execute a class)
or java [-jar] [-options] jarfile [args...]
(to execute a jar file)
Java Version is as below
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX build ca142-20050929a (SR3)
(JIT enabled: jitc))
Regards,
Sumi

Hi all,
I just checked the note 716927 again - it refers to note 1024539.
That one says you should use SR7 and activate J9 technology
so make sure you have the java version
"J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build
caix64142ifx-20061222 (ifix 113727: SR7 + 112603)"
and that the environment variable
IBM_JAVA_OPTIONS=-Xj9
is set for user <sid>adm
After the installation, make sure that the JVM parameters are set as described in the note 1024539.
By the way: it doesn't work if you use any other Java SDK (e.g. from Sun), as AIX has it's own one.
Best regards,
Cornelia

Osdm error 'could not create the Java virtual machine.'

Running on Windows XP. SQL Developer reports Java(TM) Platform=1.5.0_06
I downloaded and unzipped the osdm early adopter release,but when I double click on the osdm.exe, I get a dialog box titled"Java Virtual Machine Launcher" with the error:
could not create the Java virtual machine.
I'm don't know where to begin to troubleshoot this problem.
Is there a log,trace,error file somewhere?
Do I need something specific in my path or an environment variable set?

Thanks Jim, for helping and the support. I'll respond to a few things in this thread for the rest of the forum.
Feedback
Let's start with the feedback and support. As Rene said, he is working at answering all queries coming into the feedback application. This means reviewing the issues, working with the developers and logging bugs. Each comment and query in that application is addressed and users can go back in an review the feedback for their own comments in the application too. We have had considerable interest and downloads, about which we are very excited, and this means there are lots of queries. Rene is addressing all these, and as I type, there are no comments in that application that have not been addressed. Not all are closed, as there are some outstanding issues, but each user who has submitted a comment shold have received at least one email.
The Team
I'm reluctant to comment about which part of the product is built in which country, but will say that SQL Developer has been a small team, with the greater percentage of developers living outside the US from the outset. I love working in the team including the wide diversity of locales and cultures and also think that because we live across multiple time zones, we can help users most times of the day or night. We are very privileged to have had the modeling team join us and I'm sure you'll get to know them in time too. If you are interested, the team stretches across a few states in the US, Ireland, Northern Ireland,England, Belgium, Bulgaria, India and China!
Now to the problem. - Java virtual machine
1. There is a choice of download, either with the JDK or without. If you download the build with the JDK, there should be no problem, as the product knows where to find the jdk. I'm not sure I see which of these 2 downloads was used. So that would be useful information to have.
2. If you use the build without the JDK, then Data Modeling looking for the detail in your path.(Unlike in SQL Developer where we prompt you) You can test to see what is in your path by starting a command line, or command prompt and typing java -version. This will tell you what version of java is being looked for and used by Data Modeling.
If you do not have a JDK, then you can download and install that as described on the download page.
Troubleshooting
We want to release SQL Developer Data Modeling as a standalone tool (i.e. what you are testing today) or underpinned by a repository. So our main goal is to ensure that we have a solid stable and usable product for production. The plan is to follow production with a much tighter integration to the underlying SQL Developer framework.
Regards
Sue

ERROR :SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd. File: default.html

Hi ,all
I am beginner for windows 8 app development.
I created simple project on domain name called www.aaa.com and also hosted web services on same domain. at that time i was able to access web services on my application code using AJAX. Then i created same project on another domain called www.bbb.com then
i tried to access wcf services from www.aaa.com domain. at that time my javaScript console is throwing this error "SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd.
File: default.html". I tried some thing on both end on web services project as well as windows 8 app.
AT app side in package.appxmanifest file i added below code.
<Capabilities>
    <Capability Name="privateNetworkClientServer" />
    <Capability Name="internetClient" />
</Capabilities>
AT web services side in web.config file i added following settings.
<serviceHostingEnvironment aspNetCompatibilityEnabled="true"
        multipleSiteBindingsEnabled="true" />
    <standardEndpoints>
      <webScriptEndpoint>
        <standardEndpoint name="" crossDomainScriptAccessEnabled="true" />
      </webScriptEndpoint>
    </standardEndpoints>
but above all diagnostics are not working for me.
and one more thing at www.bbb.com domain in sample android app while i am trying to consume my wcf services it is working fine. the problem is specifically for windows 8 app only.
Here is sample code which i had written in default.html file
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8" />
<title>DemoWebService</title>

<script src="/js/default.js"></script>
<script>
var personNameVar = "Hardik";
var dataIn = '{' + '"personName":"' + personNameVar + '"}';
$.ajax({
url: "http://SomeIP:SomePort/Service1.svc/HelloWorld",
type: "POST",
contentType: "application/json; charset=utf-8",
data: dataIn,
dataType: "json",
success: function (data) {
var object = JSON.parse(data.d);
if (object.Error == '') {
$('body').html(object.Response);
error: function (error) {
$('body').html(error);
</script>
</head>
<body>
</body>
</html>
so is there any help. I am eagerly waiting for it.
P.S I am accessing www.aaa.com web services using VPN.
Thanks in advance,
Hardik

In that case, I recommend that you collect a Network trace using a tool such as Microsoft Network Monitor or Wireshark to understand what IP Address is the connection being made to. The 0x2efd error correlates to the WinINet error: ERROR_INTERNET_CANNOT_CONNECT
meaning that the connection with the remote server cannot be established. When you collect a network trace, try looking for the TCP-SYN signal and see whether your remote server responds with a SYN-ACK.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog

Error: Outlook could not create the work file. Office 2013

Similar Messages

Maybe you are looking for