Error : Output could not be issued

Dear Expert,
I am not able to take print out of one of my invoice. While looking for print preview i am getting error message as below :
Output could not be issued
Message no. VF 304
Diagnosis
An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
I did some changes in smartform but all is activated and other invoices are showing proper output except one.
can you please tell me possible causes to trace this error.
Thanks.

Hello,
Please check the OSS : Note 451568 - Document printing:Message VF304 - Output could not be issued for more informtaion.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=451568
The OSS will be helpful.
BR,
Tushar

Similar Messages

Error: "output could not be issued" while seeing a print preview in va03

Dear All
In a T.code VA03 , if i have display a print pre-view for a particular order for an output type BAOA . Am getting an error "output could not be issued" . please give me the solution for this

Hi,
First check in PATH: - SPRO > Sales and Distribution > Basic Functions > Output Control > Output Determination > Output Determination Using the Condition Technique > Maintain Output Determination for Sales Documents > Maintain Output Types - Here for O/P Type BAOA, check whether FORM Routine "ENTRY" has been asisgned under "Processing Routine" option.
If not resolved then secondly, Check whether any Requirement (Routine) has been assigned to the Output Type BAOA in the Output Determination Procedure.
To check the same, go to PATH: - SPRO > Sales and Distribution > Basic Functions > Output Control > Output Determination > Output Determination Using the Condition Technique > Maintain Output Determination for Sales Documents > Maintain Output Determination Procedure - Here check for the Procedure assigned to your Sales Area and Sales Doc Type (for e.g. V10000). If any requirement is there then make it blank and then try printing the order by deleteting and adding new o/p record.
If not resloved then Ask ABAPer to debug it.

In smartforms error : output could not be issued

Hi Experts,
I am executing a smart form in particular transaction but I am getting output could not be issued error message. I have checked in nace and output type is assigned and condition record is also maintained for that condition type. That condition we checked in quotation document extras>output> edit and the coditon was there but we are not getting the preview.
Thanks.

If you have done any modifications in the layout.
Then it will not print.
If the alignments are not fitting properly then also it will not print .
Regards,
Vinay.

VL02N Error: Output could not be issued with smartforms

Hi All,
Currently I am doing some customization on existing delivery note smartforms LE_SHP_DELNOTE on ECC 6.0.
I have copied it from the above smartforms and name it as ZLE_SHP_DELNOTE. Did most of the modification according to the user's format requirement.
Manage to do the necessary settings in NACE to point to the new smartforms and also were able to print preview the report either in the standard LE_SHP_DELNOTE or the customize ZLE_SHP_DELNOTE.
But as I add more coding into ZLE_SHP_DELNOTE, the print preview starts to give me the "Output could not be issued" error.
If I were to revert back to the original LE_SHP_DELNOTE in NACE, it still works fine.
I have checked most of the issue in the forum regarding the table size or include text, but I have make sure that the table size does not exceed the window size and also i have check the checkbox that prevent any error if include text does not exist.
Hope to get help.
Thanks
David

Hi Murali,
Thanks a lot. It is due to the address that is not populating.
Currently I am reading the address from VBAK by using the following statements:
SELECT SINGLE bukrs_vf
FROM    vbak
INTO    lf_bukrs
WHERE   vkorg = is_dlv_delnote-hd_org-salesorg
AND     vbeln = is_dlv_delnote-hd_ref-order_numb.
SELECT SINGLE adrnr
FROM    t001
INTO    gf_bukrs_adrnr
WHERE   bukrs = lf_bukrs.
gf_bukrs_adrnr is the address value.
Currently I have 2 versions of my customised smartforms. One that works and one that does not work. Both has the address node.
One funny thing is that the value from is_dlv_delnote-hd_ref-order_numb is not populating for the one that does not work.
But I thought is_dlv_delnote is an interface passed on to the smartforms regardless of any changes that you made in the smartforms.
Do you have any idea why is this so?
Thanks
David

Urgent: Error in script output "output could not be issued"

Hi Experts,
I am using transaction VL02N and issuing output then it is giving error "output could not be issued" in development server.when I productionize it in production it is giving the proper output when no of line item is upto two if it exceeds it again give error message "output could not be issued"
Plz give help.
Thanks,
Tanisha

Hi,
s i agree that there are some data available in devpt server as well...
I'm listing u all the possibilities of error ... please make sure that ur doc satisfies these things
1.check whther the entries are there for the corresponding billing doc no...
2.Now suppose if you want to some data to be displayed in one
page and the rest of the data in another page i.e you want to force the data
to move to next page then use this sap script command
/: NEW-PAGE[page_name]
This will force the data to move to the next page.
3.assuming that u r using two pages(FIRST,NEXT) in the layout...
the statement that displays the line item should probably be inside the loop and corrosponding form and end form.. so that if it exceeds the page it'll automatically display it in the next page..
4.Try to expand the main window size so that continous line item
5.Make sure that u have alloted the corresponding output type for the billing document issued...
6.check the form name and the driver program name)in NACE transaction
Hope this helps you
<b><REMOVED BY MODERATOR></b>
Jgds
Message was edited by:
Alvaro Tejada Galindo

SmartForm - Output could not be issued,Message no. VL086

Hi , i had create a smart form for the DO and it is working when i try to view it through the function. However, when i want to try it through issue the Delivery Output, system throw error , "Output could not be issued,Message no. VL086"
Please kindly advise.
thank you

Hi,
Pls check if it helps
VL086: Output cannot be issued
Siraj

Output Could not be Issued - V1104

Hi Experts,
I have configured the output types and output determination procedures for sales doc type OR.
When I create a sales order and go to VA02 , and check the header-> output , I am getting this error:
'Output could not be Issued, Message no.V1104'
I am not sure where I did wrong, can anyone suggest a solution for this?
I checked the previous threads but did not find anything regarding this error message.
Thanks,
Arthy

Hai Arthy,
Follow th e steps:
T CODE: NACE
Select V1
Click Access sequence Number
002 - Sales order type
Select the access sequence for which condition records maintained.
from the left list click the
Accesses
10 7 Order Type
Select the Overview access
Now click the Fields, it will show
AUART KOMKBV1 AUART Sales Document Type
Now save it again and check in sales order.
Regards,
Mani

Error in VF03 while printing "Output could not be issued"?

Hi all,
getting error while printing invoice VF03. Error is "Output could not be issued".
Print privew is coming fine in both side either Smartform or VF03. If I try to print, then system giving the message is Output could not be issued.
How to resolve this problem? Help me out.
Thanks in advance.
Sekhar

Hi,
Check out put is definded in line item of invoice.
Also check wheter output type is definded or in t.code nact, Application is V3, check which output type is definded for your case billing document type.
Thanks.

VT03N Output could not be issued (VW086)

When trying to print in VT03N or VT02N trx When you choose 'Shipment --> Issue output to --> Screen or Print always appears ""Output could not be issued" Message.
I've already checked NACE (appl V7) . Also, we don't use DGTMD table. In fact other messages is working and no message use that table.
I've tried to put a bp with a message and just gives error in the call function " RV_MESSAGE_PREVIEW"
Any Suggestions?
Regards
EC

Thanks a lot every one!
I have "half solved" my problem changing my Output Type, from Shipping Point to Carrier.
This is a brief description when I use Shipping Point Partner:
In "Mantain Output Files" into my "Partner functions" for my Outupt Type I have:
Medium = 01 Print output
Funct = 01 Shipping Point
My problem happens when, in VT02N, when I try to print the next FORM is called: CHECK_PRINT_RELEVANCE (Report RVADTR01).
T
his FORM chek this:
IF ( LEG-TDLNR = NAST-PARNR ).
FLAG = TRUE.
If my partner is Shipping Pont, then LEG-TDLNR = CARRIER NUMBER but NAST-PARNR = Shipping Point, therefore FLAG = FALSE and then I have my Error Mesage.
When I changed my partner from Shipping to Carrier then I got print.
Anyone knows how can I use partener = Shipping point and pull this event?
Regards
EC

Output 'incorrectly processed', 'output could not be issued'

Hi,
We trying to trigger a Bill of Lading custom Z print output type. This output was working correctly for some time and now it has started failing. When we try to issue the output through screen option it gives message 'output could not be issued'. But we are not able to figure it out as why this message is appearing even though all output configuration is good. The same output is triggering if we make some changes in the shipment change transaction(although changes are not relevent for the output parameters) but this behaviour is not constant as output triggers some time after the changes and some time may not.
When we try to retrigger the output type using messages option on the shipment, error appears as 'incorrectly processed'.
Please suggest as why this output type is behaving like this. Any help will be highly appreciated.
Thanks,
Sharan

if it worked well in the past, then I would check if there was a change in the print program or in the form or in customizing, further I would investigate if this could be triggered from "outside" e.g. implementing OSS notes, activate business functions etc.
If you know the date when it started failing, then checking the transports of changes prior to this event in SE10 could be a good starting point.

Output could not be issued

Hi,
We are in process of upgrade.now we are in testing face.When we testing vy printing sales order doucments from VF03 trasaction we are getting error message 'Output Could not be issue',but when we are trying to see print preview it appears correct.When we test with same printer in 4.6c we doesnt have any problem.Please help us in solving this.
Regards,
Sunil.K

Hi Sunil,
Goto Service.sap.com and chk for this note.
OSS Note 451568 - Document printing:Message VF304 - Output could not be issued
and try to apply the corrections present in the note.
Regards,
Lakshman.

"Output could not be issued" when using custom page formats

Dear all,
I created a custom page format using SPAD. Its dimension is 7.5cm x 10cm (190mm x 254mm). I also created this page format in windows and set as the default paper size in my printer. However, when trying to print a smartform using this size, the message "Output could not be issued" is given. When I use the standard paper sizes (e.g., LETTER, DINA4), the form prints OK.
Can you point me to the direction to solving this?
Thank you!
Kyle

Issue resoved.
For those who are encountering the same problem, here's what I did. I tested the smartform by itself and it reported the specific error: the page format is not supported in device type SWIN. I added it in another device type SAPWIN. This was just a simple miscommunication between the admins and the developer. I added the format in SWIN and everything works fine.
Kyle

"Output could not be issued" when trying to display the layout of the order

"Output could not be issued" error comes when trying the display layout of the order confirmation.
Thanks

Hi,
This error is faced generlly when output type has not been assigned to the document type.In sales order Follow the path
Goto-Extras-Output-Header-Edit.
Here mention the output type and communication medium and save the document.
Now try to issue the output.
I assume that you have maintain the output determination procedure in SPRO.
For automatic determination of output maintain the output condition record
Reward points if useful
Regards,
Amrish Purohit

Output could not be issued Message no. V1104

Hi Expert,
I have done output configuration properly for Zsalesorder and Zsmartform ,I can able to see print view in order but when I will give print then print is not coming and below error is coming
Output could not be issued Message no. V1104

Hi,
it seems there is no connection between printer and sap server.
Firstly send normal world doc from server to printer.
If normal world document is not printed in this case you should check connection.
Regards

Getting sucess message as output could not be issued after the printout

hi,
in the Transacation VF02 i want to print my Z smartform.
so in the NACE transaction i have copied the RD00 and created Z entry and the Zsmartform.but the After printing the smartform i am getting the success message in the bottom of the screen as output could not be issued.but i should get the message as output is issued succesfully since i got the print.
pls suggest me

Hi shantha,
i suppose it will solve if u will debug that object.
Reply for queries. shal post the updates....
Regards,
Kumar.

Error : Output could not be issued

Similar Messages

Maybe you are looking for