Error Overflow 9AVHISTORY for digits exceeding 5 ie 100000

Dear All ,
While uploading data into APO BW in key figure 9AVHISTORY the digits exceeding 5 ie 100000 is not getting uploading , digits upto 5 ie 10000-99000 is uploading fine .
The error is as follows : " Error Overflow converting on assignment field 9AVHISTORY " Message no. RSDS013 .
Checked the info object the domain settings read 17 characters with 3 decimals .
Please suggest how to resolve this issue .
Thanks and Regards ,
Prashant Kumar

HI,
Please check the Domain Details RSKYFQUA, Is some one maintained Value range.
As well as check the Conversion Routine.
Hope your team has not changed SAP standard details of the 9AVHISTORY

Similar Messages

  • Error of compilation for IOS: Exception in thread "main" java.lang.OutOfMemoryError: GC overhead limit exceeded

    Error of compilation for an IOS project:
    Exception in thread "main" java.lang.OutOfMemoryError: GC overhead limit exceeded
    at adobe.abc.Algorithms$SetMap.get(Algorithms.java:226)
    at adobe.abc.Algorithms$ExprWorkQueue.add(Algorithms.java:491)
    at adobe.abc.Algorithms$ExprWorkQueue.addAll(Algorithms.java:524)
    at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:6007)
    at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4733)
    at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3615)
    at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2309)
    at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:534)
    at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:343)
    at com.adobe.air.ipa.GOAOTCompiler.convertAbcToLlvmBitcodeImpl(GOAOTCompiler.java:243)
    at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:85)
    Compilation failed while executing : ADT
    We allocate 4GB of memory for the compilator and the results is the same. The build is very long (~5 min)

    See if this helps
    OutOfMemoryError: GC overhead limit exceeded when heap is just fine
    regards
    Pravin

  • I can't authorize my computer for digital editions. Whenever I try I get an authorization error

    Whenever I try to authorize the computer for digital editions I get an authorization error

    Adobe Digital Editions get the same message as glad on my computer as well.  I have tried to reload digital editions.  I went to original website and tried to redownload the books and the same thing keeps occurring.  But when I check to see if the computer is authorized, it says it is.  HELP!!!

  • Error in PO "IO Budget exceeded"

    Hi All,
    I am working with extended classic scenario , I am facing a problem while changing the PO.
    When I try to add or delete any line item in the PO it throws error of "Budget Exceeded for the IO XXXX" for 1st line item or any other line among the PO for which the PO is ordered and Budget is available.
    e.g.
    1) PO is created with one IO 1P , its in ordered status . after that I try to add 2nd line item in the same PO with IO 2P, that time it throws error " Line item 1 Budget exceeded for  IO 1P "
    2) Po created with 8 line items with different IOs.. When I try to delete 6 line item , it throws Budget exceeded error for other line item.
    Its working fine in Test system, I tried to replicate the same scenario in ET2 ( Test system ) but I didn't get any error there, so its really very difficult to analyse exactly whats happening in production system.
    Please help me out to resolve this issue
    Regards,
    Sheetal

    Hi CS,
    I have tried all sceanrios  before reporting this problem .I had created PO in R/3 and deleted , added line item in the same PO..  There is no any error in R/3 system.
    Its working fine. Only problem in the SRM side. That day I received one more same problem with another  PO.& IO..  User was trying to delete the PO line item , he wasn't able to delete it that day. But next day, he could able to delete the line item. & nothing was changed in that one day... This is really inconsistency of the system.. I don't know whats happening in the system and how to rectify this error. As  I said, I had tried to replicate the scenarion in SRM test system . In my first atttempt , i could able replicate the same error, but when I tried next day there was no any error in the PO...... After that I tried many POs but not able to replicate the same error.  I have raised OSS for this , but side by side I am trying to fix this problem from side, as many problems are reporting from the user side..
    Also I would like to share one more imp thing, that this problem is only one specific conutry.. We are supporting Globally, but not other than Thailand reported this problem and its nos are also increasing day by day.
    Is there FI-CO related check setting there in SRM & R/ 3?
    I have checked the R/3 Co setting for IO, so will the Tolerance limit setting affect in this case?
    Please let me know
    Sheetal

  • Error message display for PO creation with reference to internal orders

    Sir,
    While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message  when Budget is exceeded.
    But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
    Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
    Regards,
    Srinivasa Murthy

    Hi Anupam,
    The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
    This error comes during PO creation Process and PO can not be saved. This error message display is correct.
    Item 001 Order 600643 budget exceeded
    Message no. BP604
    Diagnosis
    In document item 001 Order 600643, budget  for fiscal year 2009 was exceeded by 99,960,000.00 INR.
    But  my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
    Regards,
    Srinivasa Murthy

  • Message error Item wbs element budget exceeded

    Hi
    when I do a purchase requisition imputed to WBS element, WBS element consuming, but when I'm going to make the budget document of the reserve (R) in a transaction FMX1 jumps me an error message:wbs element budget exceeded ,it is trying to consumed WBS element , when it has consumed in the purchase requisition.
    I have solved it error with limits tolerance but in the funds commitments consumed other time , we see these results  in the report S_ALR_8713558.
    Where is the problem????
    Than you

    You have to differentiate the beaviour of the availability control in customizing for PS > Costs > Budget > Define tolerance limit
    With the "transaction group" you can differentiate for:
    ++     All activity groups
    00     Purchase requisition
    01     Purchase order
    07     Funds reservation
    Ciao
    Giorgio

  • How can I resolve installation errors DF024 & DF037 for CS5.5 on Mac?

    Please help. I've gone through the forum posts, as well as searched the Internet, and find the matter daunting. Have tried to implement a solution and may have caused more problems. Assistance would be greatly appreciated.
    PROBLEM:
    I am unable to uninstall or reinstall both Dreamweaver 5.5 and CS 5.5.
    Continually get extensive number of the following errors:
    ERROR DF024 Unable to preserve original file...
    ERROR DF024 Unable to move file…
    ERROR DF037 Unable to delete directory…
    SYSTEM CONFIG:
    Adobe CS 5.5
    Mac OS 10.7.4
    MacBook Pro 2.5 GHz
    Intel Core 2 Duo with 4 GB Ram
    BACKGROUND (History appears chronologically in 4 parts.):
    CS 5.5 was already installed and functioning fine, then upgraded from OS 10.6 to 10.7. Noticed issues with elements not appearing in DISPLAY VIEW of Dreamweaver, but was correct in CODE VIEW and BROWSER PREVIEW.
    Tried to reinstall and uninstall Dreamweaver 5.5 several times using the CS 5.5 installation disk. Consistently got DF024 errors. NOTE: After first attempt. installer marked Dreamweaver as already installed, but not the others. Using the Finder, the Dreamweaver directory appears to be empty unless the files are now hidden. Nothing regarding the application can be seen in the Trash. Also unable to launch any other Adobe CS apps.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 19 error(s), 15 warning(s)
    ----------- Payload: {ED28819E-310F-4F17-925C-C69B0A1C1F7F} Suite Shared Configuration CS5.5 2.5.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/ssc/DesignSuitePremium-CS5-Win-GM/SLConfig.xml" Error 0(Seq 15)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 15)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    SLConfig.xml appeared to be an alias pointing to a file of the same name in the Mac version. Went to original file, made a new alias and replaced the corrupted file.
    Then rebooted system and relaunched CSS5.5 Installer with all apps selected. Program started and ran for about 15 min before reporting more errors, now with error DF037 as well. Did this again with the same results except the DF037 error did not reappear. It appears the the problems are mostly in two directories:
    /Library/Application Support/Adobe/CameraRaw/CameraProfiles/
    and
    /Library/Application Support/Adobe/ssc/DesignSuitePremium-CS5.5-Win-GM/
    but I am not sure how to best resolve this.
    Below are selected portions of the most recent (and VERY verbose) error log. To conserve space, log entries in which the same error is repeated are truncated. (Only the first one and last repetitions are copied here; the others have been omitted and are replaced with highlighted ellipses [i.e., "..."].) Please let me know if you would like the complete log report.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 238 error(s), 98 warning(s)
    WARNING: DW031: Payload:{0D96CFE6-376D-44B8-808A-16F3BEB73263} Adobe Media Encoder CS5.5 5.5.0.0 has been updated and has been selected for repair. The patch {41BFF2C7-9F45-4CF3-A257-E80E14802157} Adobe Media Encoder CS5.5_5.5.1_AMECore5.5All 5.5.1.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {4E1B59A1-029E-4C16-BBB3-F10D40EBB6EE} Photoshop Camera Raw_6.7_AdobeCameraRaw6.0All 6.7.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{F313167E-5172-11E0-ACE7-30C2E3AB3DC5} Adobe InDesign CS5.5 Common Base Files 7.5.0.0 has been updated and has been selected for repair. The patch {6AFE0576-7A2C-11E1-88D2-74AAF24106A5} Adobe InDesign CS5.5 Common Base Files_7.5.3.333_AdobeInDesign7xCommonBase-mul 7.5.3.333 will be uninstalled now.
    WARNING: DW031: Payload:{0CCF0458-5171-11E0-BC45-DC59E3AB3DC5} Adobe InDesign CS5.5 Application Base Files 7.5.0.0 has been updated and has been selected for repair. The patch {848BF4CC-7A2B-11E1-8A90-3F8CF24106A5} Adobe InDesign CS5.5 Application Base Files_7.5.3.333_AdobeInDesign7xAppBase-mul 7.5.3.333 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{ED9DC850-516E-11E0-9096-1FE5E2AB3DC5} Adobe InDesign CS5.5 Application Language Files_AdobeInDesign7xAppLang-en_US 7.5.0.0 has been updated and has been selected for repair. The patch {C68C3E1A-7A29-11E1-A9D9-0F55F24106A5} Adobe InDesign CS5.5 Application Language Files_7.5.3.333_AdobeInDesign7xAppLang-en_US 7.5.3.333 will be uninstalled now.
    WARNING: DW031: Payload:{D97AF04B-B70A-4862-BC25-31E6D9C4A529} Adobe Flash CS5.5 11.5.0.0 has been updated and has been selected for repair. The patch {D9F625C8-FD5B-4C13-9B3C-5B9F09BA0DC0} Adobe Flash CS5.5_11.5.1_AdobeFlash11.5-mul 11.5.1.0 will be uninstalled now.
    WARNING: DW031: Payload:{03FB981A-5170-11E0-A90E-3CEDE2AB3DC5} Adobe InDesign CS5.5 Application Base Files2 7.5.0.0 has been updated and has been selected for repair. The patch {FE75A95E-7A2B-11E1-8037-B59BF24106A5} Adobe InDesign CS5.5 Application Base Files2_7.5.3.333_AdobeInDesign7xAppBase2-mul 7.5.3.333 will be uninstalled now.
    WARNING: DW031: Payload:{0D96CFE6-376D-44B8-808A-16F3BEB73263} Adobe Media Encoder CS5.5 5.5.0.0 has been updated and has been selected for repair. The patch {41BFF2C7-9F45-4CF3-A257-E80E14802157} Adobe Media Encoder CS5.5_5.5.1_AMECore5.5All 5.5.1.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {4E1B59A1-029E-4C16-BBB3-F10D40EBB6EE} Photoshop Camera Raw_6.7_AdobeCameraRaw6.0All 6.7.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{6A2E619B-E4AC-433B-A648-D458CE543A96} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{F313167E-5172-11E0-ACE7-30C2E3AB3DC5} Adobe InDesign CS5.5 Common Base Files 7.5.0.0 has been updated and has been selected for repair. The patch {6AFE0576-7A2C-11E1-88D2-74AAF24106A5} Adobe InDesign CS5.5 Common Base Files_7.5.3.333_AdobeInDesign7xCommonBase-mul 7.5.3.333 will be uninstalled now.
    WARNING: DW031: Payload:{0CCF0458-5171-11E0-BC45-DC59E3AB3DC5} Adobe InDesign CS5.5 Application Base Files 7.5.0.0 has been updated and has been selected for repair. The patch {848BF4CC-7A2B-11E1-8A90-3F8CF24106A5} Adobe InDesign CS5.5 Application Base Files_7.5.3.333_AdobeInDesign7xAppBase-mul 7.5.3.333 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{ED9DC850-516E-11E0-9096-1FE5E2AB3DC5} Adobe InDesign CS5.5 Application Language Files_AdobeInDesign7xAppLang-en_US 7.5.0.0 has been updated and has been selected for repair. The patch {C68C3E1A-7A29-11E1-A9D9-0F55F24106A5} Adobe InDesign CS5.5 Application Language Files_7.5.3.333_AdobeInDesign7xAppLang-en_US 7.5.3.333 will be uninstalled now.
    WARNING: DW031: Payload:{D97AF04B-B70A-4862-BC25-31E6D9C4A529} Adobe Flash CS5.5 11.5.0.0 has been updated and has been selected for repair. The patch {D9F625C8-FD5B-4C13-9B3C-5B9F09BA0DC0} Adobe Flash CS5.5_11.5.1_AdobeFlash11.5-mul 11.5.1.0 will be uninstalled now.
    WARNING: DW031: Payload:{03FB981A-5170-11E0-A90E-3CEDE2AB3DC5} Adobe InDesign CS5.5 Application Base Files2 7.5.0.0 has been updated and has been selected for repair. The patch {FE75A95E-7A2B-11E1-8037-B59BF24106A5} Adobe InDesign CS5.5 Application Base Files2_7.5.3.333_AdobeInDesign7xAppBase2-mul 7.5.3.333 will be uninstalled now.
    ----------- Payload: {ED28819E-310F-4F17-925C-C69B0A1C1F7F} Suite Shared Configuration CS5.5 2.5.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/ssc/DesignSuitePremium-CS5.5-Win-GM/aul.xml" Error 0(Seq 26)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 26)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR: DW050:  - AdobeHelp: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Application Base Files2: Install failed
    ERROR: DW050:  - Creative Suite 5.5 Design Premium: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5.1 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe InDesign CS5.5 Application Base Files: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Media Encoder CS5.5: Install failed
    ERROR: DW050:  - AdobeColorNA CS5.5: Install failed
    ERROR: DW050:  - DynamiclinkSupport: Install failed
    ERROR: DW050:  - Adobe Device Central CS5.5_DeviceCentral3.5LP-en_US: Install failed
    ERROR: DW050:  - HIL Help Search: Install failed
    ERROR: DW050:  - Adobe Flash CS5.5_AdobeMobileExtension_Flash11.5-en_US: Install failed
    ERROR: DW050:  - CSXS Story Extension: Install failed
    ERROR: DW050:  - Photoshop Camera Raw: Install failed
    ERROR: DW050:  - Adobe Player for Embedding 3.2: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS5.5: Install failed
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS5.5: Install failed
    ERROR: DW050:  - Adobe Media Encoder CS5.5_5.5.1_AMECore5.5All: Install failed
    ERROR: DW050:  - AdobeColorCommonSetRGB: Install failed
    ERROR: DW050:  - AdobeColorPhotoshop CS5.5: Install failed
    ERROR: DW050:  - Adobe Device Central CS5.5: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Mini Bridge CS5.1: Install failed
    ERROR: DW050:  - Adobe ReviewPanel CS5.5: Install failed
    ERROR: DW050:  - Adobe Fireworks CS5.1: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe SING CS5: Install failed
    ERROR: DW050:  - Photoshop Camera Raw_6.7_AdobeCameraRaw6.0All: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    ERROR: DW050:  - Adobe Flash Catalyst CS5.5: Install failed
    ERROR: DW050:  - AdobeColorCommonSetCMYK: Install failed
    ERROR: DW050:  - Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll: Install failed
    ERROR: DW050:  - Adobe Hunspell Linguistics Plugin CS5.5: Install failed
    ERROR: DW050:  - Adobe XMP Panels CS5: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Common Base Files_7.5.3.333_AdobeInDesign7xCommonBase-mul: Install failed
    ERROR: DW050:  - AIR for APPLE IOS Support (FP): Install failed
    ERROR: DW050:  - AdobeTypeSupport CS5: Install failed
    ERROR: DW050:  - Adobe CSXS Infrastructure CS5.5: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Common Language Files_AdobeInDesign7xCommonLang-en_US: Install failed
    ERROR: DW050:  - Adobe Flash Fonts1: Install failed
    ERROR: DW050:  - Adobe Content Viewer: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Application Base Files_7.5.3.333_AdobeInDesign7xAppBase-mul: Install failed
    ERROR: DW050:  - Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack: Install failed
    ERROR: DW050:  - Adobe Flash CS5.5_AdobeFlash11.5-en_USLanguagePack: Install failed
    ERROR: DW050:  - Digital Publishing: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Dreamweaver CS5.5: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS5.5: Install failed
    ERROR: DW050:  - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack: Install failed
    ERROR: DW050:  - Pixel Bender Toolkit: Install failed
    ERROR: DW050:  - Adobe Dreamweaver Widget Browser: Install failed
    ERROR: DW050:  - Adobe Toolhints CS5.5: Install failed
    ERROR: DW050:  - PDF Settings CS5: Install failed
    ERROR: DW050:  - Adobe Linguistics CS5: Install failed
    ERROR: DW050:  - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
    ERROR: DW050:  - AdobeColorJA CS5.5: Install failed
    ERROR: DW050:  - AdobeOutputModule: Install failed
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Adobe Dreamweaver CS5.5_AdobeDreamweaver11.5en_USLanguagePack: Install failed
    ERROR: DW050:  - AdobePDFL CS5: Install failed
    ERROR: DW050:  - AdobeCMaps CS5: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS5.5: Install failed
    ERROR: DW050:  - Adobe Digital Publishing Application Language Files_AdobeDigitalPublishingAppLang-en_US: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Application Language Files_7.5.3.333_AdobeInDesign7xAppLang-en_US: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Application Feature Set Files: Install failed
    ERROR: DW050:  - Adobe Buzzword CS5.5: Install failed
    ERROR: DW050:  - Adobe Flash CS5.5: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Flash CS5.5_11.5.1_AdobeFlash11.5-mul: Install failed
    ERROR: DW050:  - SiteCatalyst NetAverages CS5.5: Install failed
    ERROR: DW050:  - Flash Player: Install failed
    ERROR: DW050:  - Adobe Flash CS5.5_AdobeMobileExtension_Flash11.5-mul: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - AdobeColorVideoProfilesCS CS5.5: Install failed
    ERROR: DW050:  - Suite Shared Configuration CS5.5: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Application Language Files_AdobeInDesign7xAppLang-en_US: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5.1 English Language Pack_AdobePhotoshop12-en_US: Install failed
    ERROR: DW050:  - Adobe Bridge CS5.1: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5.1 Support: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Common Base Files: Install failed
    ERROR: DW050:  - Adobe Linguistics CS5.5: Install failed
    ERROR: DW050:  - Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All: Install failed
    ERROR: DW050:  - Adobe InDesign CS5.5 Application Base Files2_7.5.3.333_AdobeInDesign7xAppBase2-mul: Install failed
    ERROR: DW050:  - AdobeColorEU CS5.5: Install failed

    Hi Sharad,
    Thank you for your reply.
    Since my initial posting here, I've attempted a few more installations. Each time a file from /Library/Application Support/Adobe/ssc/ would appear with the same error DF024, and it was always an alias. So each time I would replace the old alias with a new manually created alias pointing to the same original as the old alias. Sure enough, when I relaunched the installer,  error DF024 with the old alias no longer appeared, but a new error DF042 with another alias from the same directory did appear. Then I manually replaced  all aliases found in the /Library/Application Support/Adobe/ssc/ directory with new ones I created.
    Upon rebooting and relaunching the installer program, the program did not stop at around 12% as consistently it did up until now. Instead, it progressed to 80% before it stopped and reported a huge number of new errors. Most of them pertain to the inability to roll back the installation it had attempted. No files from /Library/Application Support/Adobe/ssc/ appeared in the new log report.
    To gain a better understanding of the logs, I downloaded AdobeSupportAdvisor and tried using it, but it referred me to online solutions that weren't relevant to my situation (i.e., one mentions Photoshop CS4 and I've never installed CS4).
    I also tried following the articles from the Adobe knowledgebase:
    cspid_84451: Troubleshoot with install logs | CS5, CS5.5, CS6
    which is fine if you only have a few errors, and
    cspid_83481: Installation, launch log errors | CS5, CS5.5, CS6, CCM
    which doesn't list error DF024.
    At this point I've decided to not not make anymore attempts without some expert guidance.
    The log file seem too large to post here. If you would like review the log, I can perhaps post it on www.pastebin.com unless you can suggest a better way. Please let me know.

  • Fire fox is not reading my XML file for digital signature

    I have to upload the xml file in www.incometaxindiaefiling.gov.in by digitally signing the xml file. When I click on the tab for digital sign, the message come " cannot read the xml file"

    Not the sort of thing it is easy to help with as by definition it will not be a public site but one for Indian Taxpayers, and can be expected to be secure.
    Have you tried using Internet Explorer.
    You could try attaching screen shots of the problem pages and any error messages, but please be careful and edit out any confidential or sensitive information before attaching such an image.
    Please remember you are posting on a public and websearch indexed website, this is not a private support ticket.
    *link is https://support.mozilla.org/en-US/questions/968557
    Are you seeing a shield icon in your location bar as explained in this article
    * How does content that isn't secure affect my safety?
    That is rather a longshot as it is a change in Firefox so could affect you this year, but would not have affected you last year.
    * see [[How does content that isn't secure affect my safety?]]
    I note the public portion of the site
    * https://incometaxindiaefiling.gov.in/
    * talks about 'e-Filing' and 'Option 1: Use Digital Signature Certificate (DSC)' and then gives two other alternatives
    Other possibilities
    *[[Troubleshoot the "Secure Connection Failed" error message]]

  • Newbie ERROR- URL Encoded SQL Length exceeds allowed 32K limit

    My SQL Query worked fine yesterday.( I'm still in developing mode)
    I made a copy of it and put it into a text file.( Just to be sure I had it.)
    Today When I tried to run it in APEX , I get error
    URL Encoded SQL Length exceeds 32K limit.
    Is there any way to tell how the size of my query ( for example 33K)
    is using?
    TIA
    Steve42

    I had to put out some other fires for the last few days.
    I'm trying to use it in SQL worksheet.
    That is my entire error message. It does NOT have an Error #.
    Product Build: 3.0.0.00.20
    TIA,
    Steve42

  • Need help writing script for Digital DAQ

    Hello,
    I am trying to write an aquisition program for digital input coming from a hall sensor.  I will be passing a magnet over a hall sensor on a motor and want to record the number of rotations.  I have pasted together a script based on various websites, but it isn't functioning the way I want.  I would like to be able to collect data points indefinately, or fixed, and then print out the resulting count.  I have attepted to use the ctypes wrapper in Python.  The NI functions remain unchanged though, so if you don't know Python it shouldn't be a problem to read.  I am using a NI PCI-6503. 
    NI PCI-6503
    NI PCI-6503
    NI PCI-6503
    The code:
    # C:\Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage\Acq-Int Clk\Acq-IntClk.c
    import ctypes
    import numpy
    nidaq = ctypes.windll.nicaiu # load the DLL
    # Setup some typedefs and constants
    # to correspond with values in
    # C:\Program Files\National Instruments\NI-DAQ\DAQmx ANSI C Dev\include\NIDAQmx.h
    # the typedefs
    int32 = ctypes.c_long
    uInt32 = ctypes.c_ulong
    uInt64 = ctypes.c_ulonglong
    float64 = ctypes.c_double
    TaskHandle = uInt32
    # the constants
    DAQmx_Val_ChanForAllLines = int32(0)
    def CHK(err):
    """a simple error checking routine"""
         if err < 0:
              buf_size = 200
              buf = ctypes.create_string_buffer('\000' * buf_size)
              nidaq.DAQmxGetErrorString(err,ctypes.byref(buf),buf_size)
              raise RuntimeError('nidaq call failed with error %d: %s'%(err,repr(buf.value)))
    # initialize variables
    taskHandle = TaskHandle(0)
    max_num_samples = 1000
    # array to gather points
    data = numpy.zeros((max_num_samples,),dtype=numpy.float64)
    # now, on with the program
    CHK(nidaq.DAQmxCreateTask("",ctypes.byref(taskHandle)))
    CHK(nidaq.DAQmxCreateDIChan(taskHandle,'Dev1/port1/line1',"", DAQmx_Val_ChanForAllLines))
    CHK(nidaq.DAQmxStartTask(taskHandle))
    read = int32()
    CHK(nidaq.DAQmxReadDigitalU32(taskHandle,int32(-1),float64(1),DAQmx_Val_GroupByChannel,data.ctypes.data,max_num_samples,ctypes.byref(read),None))
    print "Acquired %d points"%(read.value)
    if taskHandle.value != 0:
         nidaq.DAQmxStopTask(taskHandle)
         nidaq.DAQmxClearTask(taskHandle)
    print "End of program, press Enter key to quit"
    raw_input()
    This script returns "Acquired 1 points" immediately, regardless of how many times the hall sensor has been switched.  
    I apologize for the sloppy code, but I understand very little of the underlying principles of these DAQ functions, despite reading their documentation.  Seeing as how the code does not return an error, I am hoping there is just a minor tweak or two that will be farily obvious to someone with more experience.  
    Thanks

    Hey Daniel,
    Most of this script is from http://www.scipy.org/Cookbook/Data_Acquisition_with_NIDAQmx. 
    I needed to run the ReadDigitalU32 function in Python loop because my DAQ device did not support timed aquistion and I don't have LabView.  
    import numpy
    import time
    import ctypes
    nidaq = ctypes.windll.nicaiu # load the DLL
    # Setup some typedefs and constants
    # to correspond with values in
    # C:\Program Files\National Instruments\NI-DAQ\DAQmx ANSI C Dev\include\NIDAQmx.h
    # the typedefs
    int32 = ctypes.c_long
    uInt32 = ctypes.c_ulong
    uInt64 = ctypes.c_ulonglong
    float64 = ctypes.c_double
    TaskHandle = uInt32
    # the constants
    DAQmx_Val_Cfg_Default = int32(-1)
    DAQmx_Val_Volts = 10348
    DAQmx_Val_Rising = 10280
    DAQmx_Val_FiniteSamps = 10178
    DAQmx_Val_GroupByChannel = 0
    DAQmx_Val_ChanForAllLines = int32(0)
    # initialize variables
    taskHandle = TaskHandle(0)
    max_num_samples = 10000
    data = numpy.zeros((max_num_samples,),dtype=numpy.float64)
    read = uInt32()
    bufferSize = uInt32(10000)
    def CHK(err):
    """a simple error checking routine"""
         if err < 0:
              buf_size = 200
              buf = ctypes.create_string_buffer('\000' * buf_size)
              nidaq.DAQmxGetErrorString(err,ctypes.byref(buf),buf_size)
              raise RuntimeError('nidaq call failed with error %d: %s'%(err,repr(buf.value)))
    # Start up DAQ
    CHK(nidaq.DAQmxCreateTask("",ctypes.byref(taskHandle)))
    CHK(nidaq.DAQmxCreateDIChan(taskHandle,"Dev?/port?/line?","", DAQmx_Val_ChanForAllLines))
    CHK(nidaq.DAQmxStartTask(taskHandle))
    #initialize lists and time 1 
    t1 = time.time()
    times = []
    points = []
    while True:
         try:
              CHK(nidaq.DAQmxReadDigitalU32(taskHandle,int32(-1),float64(1),
              DAQmx_Val_GroupByChannel,data.ctypes.data,uInt32(2*bufferSize.value)
             ,ctypes.byref(read), None))
              t2 = time.time()
             #data[0] is the position in the numpy array 'data' that holds the value aquired
             #from your device
             points.append(data[0])
             times.append(t2 - t1) 
             t1 = time.time()
             #Choose time interval between data aquisition
             time.sleep(.02)
         except KeyboardInterrupt:
              break
    #process the lists of points and time intervals as you so choose
    Thanks for the help!
    Paul

  • Error"Max no of gateways exceeded (100)

    Hi All,
    We have two apps servers on our sap production system. I couldn't  login in one of the app server through SM51 .when I tested the Internal RFC in SM59 I got this error-:
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: max no of gateways exceeded (100)
    Error Details     LOCATION: SAP-Gateway on host hkbisrapl2 / sapgw02
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 52597
    Error Details     MODULE: gwxxrd.c
    Error Details     LINE: 8438
    Error Details     RETURN CODE: 631
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Sat Feb 14 13:00:36 2009
    Error Details     VERSION: 2
    Pls suggest me the solution.
    Regards,
    Prashant

    No, its R3 Production server. Internal RFC for one of the app server is giving this error.
    When I tried to set the following parameters in the instance profile of the same I again got the same error while saving the profile.
    Can I make the changes in instance profile of app server at OS level?
    Profile parameters-: (On Application Servers)
    rdisp/tm_max_no           5000
    rdisp/max_comm_entries       200
    Pls suggest.
    Regards,
    Prashant

  • Failed to execute with the error Overflow converting from...

    I have a query filter for UPC in Webi Report. The report is not working for one UPC (for other UPC's the report is working fine)...it gives error "failed to execute with the error Overflow converting from '6218090010'. (WIS 10901)". The same error is coming when I ran MDX in MDXTEST command in BW. When I take the UPC filter from the query filter the report runs fine and I see this UPC in the report. The data source is Bex and we have recently upgraded to SAP EHP 1 for SAP NetWeaver 7.0.
    Regards
    Sharma

    Hi,
    Under normal circumstances it should be enough to restart the connection service.
    As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
    Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
    All the Best,
    Madhu....

  • After Efects Error: overflow converting ratio denominators.(17 :;18)

    Hello, I am experiencing a serious problem with after effects.
    It started when I right clicked a clip in my premiere pro timeline and chose "replace with after effects composition."  Upon moving the clip into my already open after effects project, the wrong still frame opened up in the comp viewer, followed by this error: After Effects Error: overflow converting ratio denominators.(17 :;18).  Clicking OK does nothing, and even after closing after effects and restarting the computer, upon opening my project, I simply get this error which will not go away, and as long as it is open, I can do nothing else with after effects.  I cannot just create a new project as several other comps are contained within this specific project, and because of this error I now have no access to them.  What can I do to correct this?

    Hi there
    Well, I have this issue for two days so I was like "OMG!", but then I have found this forum and this post which gave me some clues what should I do or what to try...so: my problem was that when I did try to open my huge project (quantum of clips, pics, effects etc.) I got to that error message and when I clicked "OK" project opens TOTALY EMPTY so I couldn't try out any of your solutions (having CAPS LOCK ON didn't help, cos simply there was absolutely nothing inside the project)...so I began scratching my head saying something like: "Hey, wait a sec - what the...?!?!?!". After some messing with empty projects I was able to import my buggy project via IMPOERT>FILE>*.aep, but as soon as I open the composition inside it crashes with exact the same error message (but at least I was able to see what's inside) + some other errors. So I write them all down to a paper and after some time I noticed there are like 2-3 the same errors that occure most of the time...and those was errors with AF own internal effects of AUTO CONTRAST and LINEAR WIPE (+ one more but that one has no significancy and also I was not sure if that third one is internal effect or not: Classic 3D). Then automaticaly my next thought was: "Hm, OK, I should try disabling those effects and see what will happend..." - well, guess what: IT HELPED!!! I went to C:\Program Files\Adobe\Adobe After Effects CS6\Support FilesPlug-ins\Effects\ and there I changed the *.eax extension of those plugins to *.eax- (or any other "unnown" extension :-D). And after some while I narrow it to one definitive internal effect plugin bug of AUTO CONTRAST! So my guess is that the framerate bug (having not whole number as framerate, like some of you suggested here) is probably NOT AFTER EFFECTS INTERNAL BUG AS WHOLE, but reather bug in some of its internal effects dealing with it (the framerate) - hope it will help to resolve this many years long bug (+ sorry: english is not my native language :-D)
    Message was edited by: eriqire9 - sorry, I by mistake write the buggy effect name wrong, it was AUTO CONTRAST, not Auto Focus :-)

  • Not authorized for digital export

    I am trying to burn a CD from songs that I have purched from iTunes. But I am getting an error message that reads that the song is an MP4 and is not authorized for digital export. What do I have to do in order to burn this CD?

    Make sure you have the Burning preferences set to "audio CD".

  • Can't transfer my ebooks to my nook get error msg E_ACT_TOO_MANY_ACTIVATIONS - Activation limit exceeded  worked fine  2 weeks ago.

    Can't get my ebooks to transfer over to my Nook.  reoccurring problem worked 2 weeks ago  Got this error msg
    E_ACT_TOO_MANY_ACTIVATIONS - Activation limit exceeded  Previously I have gotten it fixed with a remote chat from Adobe today no help from them.

    This is the Reader forum. You should ask in the Digital Editions one,
    http://forums.adobe.com/community/adobe_digital_editions

Maybe you are looking for