Error oxe800001 - cannot find iphone

Have upgraded my ipod touch with new january apps - my windows vista pc thinks its a digital camra but does not install the right druivers itunes just comes up wit the cannot find iphoine message
can anyone help?

The following link has a section for Windows 8 and describes 2 methods of transferring photos and videos: iOS: Import personal photos and videos from iOS devices to your computer

Similar Messages

I factory restored my iphone and now it is stuck in repair mode. i cannot connect to itunes to restore as i get error "itunes cannot find disk"

i restored my iphone4 to factory settings because it was running slow and some apps werent working. My phone is now stuck in repair mode and is continually rebooting itself. I know the usual solution would be to restore via itunes but itunes will not allow me to do anything as i get the error "itunes cannot find disk"

Place your phone in DFU mode (search Google) and restore

Error message, Cannot find iTunes Connect user

I cant access my I tunes from my Iphone, I get the following. Authentication Error. Cannot find iTunes connect user (2002)(2002)

Hello wallydt,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Best of luck,
Mario

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Re-installing windows 7 on L440 - Error windows cannot find .bat

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Acrobat startup error 3: Cannot find the path specified (citrix)

If a user logs in an error is generated: Error: 3 - The system cannot find the path specified. 'OK' has to be clicked, otherwise Adobe Acrobat and Distiller do not work.
The system is a Citrix environment. Not all terminal servers experience this problem.
Thank you in advance for your help.

Hi,
Before going further, what's the specific error code?
The following article provides information on Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and can be worth taking a look.
Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003
http://social.technet.microsoft.com/Forums/en-US/38953e87-52de-460a-a6a9-1865ee9ab3b1/error-system-cannot-find-the-path-specified?forum=windowsbackup
Besides, the following thread also relates to the error "The system cannot find the path specified" and can be referred to for more information.
Windows 7 backup "The system cannot find the path specified. error 0x80070003"
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Best regards,
Frank Shen

(Error) System cannot find the path specified

I am getting a error of "The system cannot find the path specified when I try to run windows server backup utility on windows 2008 standard
I have done a upgrade on one of my poweredge 2900 server from windows server 2008 standard to R2 Enterprise. Now I would like to push a backup from the 2008 standar to the enterprise and on the 2008 standard i am getting the error The system cannot find
the path specified when I run the backup utility. Please Help

Hi,
Before going further, what's the specific error code?
The following article provides information on Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and can be worth taking a look.
Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003
http://social.technet.microsoft.com/Forums/en-US/38953e87-52de-460a-a6a9-1865ee9ab3b1/error-system-cannot-find-the-path-specified?forum=windowsbackup
Besides, the following thread also relates to the error "The system cannot find the path specified" and can be referred to for more information.
Windows 7 backup "The system cannot find the path specified. error 0x80070003"
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Best regards,
Frank Shen

Import budget by using DTW, error message "cannot find this object in B1 application defined, object defined error 65171

Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua

Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty

Getting the error "Windows cannot find '-Xmx128m' "

Hi all,
When I try to I execute workbench.cmd, downloaded with OracleR TopLink 10g Release 3 (10.1.3), I am getting the error "Windows cannot find '-Xmx128m' .Make sure that you typed the name correctly...." .Further, my application is based on Java Swing and not a web application.
I made the following changes in the <TOPLINK_HOME>/bin/workbench.cmd file :
a) Set the 'JAVA_HOME' to the JDK path, same as that given in the
Environment Variables setting.
b) Set 'DRIVER_CLASSPATH' to point to
<TOPLINK_HOME>/jlib/classes12.jar.
My System configuration is as follows :-
Operating System : WindowsXP
JDK Version : JDK1.4.1
Data Base Client : Oracle9i
Data Base Server: Oracle8i
Can anyone please suggest any solution for this problem.I 'll be very thankful.
Regards,
Manju

Have you run across this thread while trying to resolve this problem - How to start Workbench (Toplink 10g) Not sure if it applies to your situation, but thought it might be helpful.
If this doesn't help, perhaps you can paste the contents of your workbench.cmd file into this thread and we can try to debug the issue further.
Neil

CGEN-01079 SYSTEM ERROR: Module: Cannot find a content canvas for stacked c

hi i am new to designer
i am using designer 6 i
i am getting follwing error
CGEN-01079 SYSTEM ERROR: Module: Cannot find a content canvas for stacked canvas CG$PAGE_1
Please suggest

For the Stacked canvas there should be a content canvas mandatory in the forms.
you designed the canvas and changed the type as stacked. but there is at least one mandatory content canvas for the forms.

Java teststand - Error 1500 Cannot find class

Hi everyone,
I am using TestStand 2010 and Java 1.7.
I try to add a java class in the Computer example folder, and call the method.
The java class is simply like below, because I just want to try calling my own java class.
I have set the Class Path in Start JVM to the directory where the Computer example (which is also the directory where I put my java class) are located.
TestStand can call the Computer's methods, but not mine (got error Error 1500 Cannot find class). I put my my java method calling among the defaults Computer example calls.
Furthermore I have read similiar threads but still I cannot solve the error.
Where is the part I miss, actually? Please share some insights.
Note: I even try to leave the Class Path empty, but TestStand still can call the Computer's methods. Why?
public class TestJava {
public static void main(String[] args) {
public String returnString(boolean a){
return "success";
Solved!
Go to Solution.

In order to load a class that is inside a package you have to use the package notation (or modify the example in order to use it). The path to the class is passed directly to the JVM in order to load the class, but really what is needed is the package from the class path including the full path to the class.
That means you have to do the following:
1. Set the class path to the base directory where you built all your classes, if you have the following structure:
MyFile.java
builds
MyPackage
MyFile.class
You have to set the classpath to the builds directory
2. When you configure your steps, you have to set the path to the class in your Java steps to MyPackage/MyFile.class (note separator is a slash, not the usual Windows backslash, so the browse button doesn't quite help with that).
Another important thing is that when you set the classpath you are deleting the normal class path in Java, if you are using Java classes from the default libraries you might have to add <jre directory>\lib\rt.jar

Syincing error message "Cannot find required disk" - Help!

I have a third gen 4gig nano that I got at Christmas. I added two CD's onto it when I got it. Now, however, I'm having trouble syning anything else - that's all I've been able to put on it are the two CD's even though I've added more into my library. I keep getting the error message "Cannot find required disk". Can anyone help me or tell me what I need to do?
Thanks in advance!

Even though you're not getting a -50, I'd check on the following document. (Your message is one of the possible symptoms of the problem outlined in the document.)
iTunes displays -50 error message when syncing iPod on Windows XP

DTW Error 65171 "Cannot find this object in B1"

Hello experts
By trying to perform a massive modifying of Journal entries using DTW I am getting this error for all the lines of my source file. I am trying to modify cost center, so I am using the JDT1 template for the data load.
The thing is that by checking Step 5 "Map Object Fields", "Source Data" tab is displaying all the data as it is on the file, but on "Target Data" tab I can not find Journal entry number and LineNum, the rest f the data is ok, but those two fields are not being retrieved on "Target Data".
Thanks in advance and regards

Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty

Firefox V4 opens Windows error message "Cannot find...."

I updated Firefox to version 4. Now, every time I open Firefox a Windows Error popup appears stating...
Windows cannot find
'https://login.yahoo.com/config/login_verify2?.intl=us&rand=832809823&i=IWZkZHNKIXRzZnNydEpidXV4dSF0ZEqOZHh4fH5iU356YmNYcnM%3d&.src=ym'
In spite of the error message, Firefox proceeds to open normally and takes me to Yahoo.com. Closing the error message has no affect pro or con...so, the message is merely a nuisance. I've tried everything I can think of to permanently remove it with no success. Running a deep scan to find out if it is a virus didn't find anything. Am using XP Home edition. By the way, I get a similar Windows error message when I try to open GMAIL, and Firefox then opens my GMAIL account. Weird.
Am hoping someone can tell me how to prevent these messages from appearing. Thanks in advance!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Error oxe800001 - cannot find iphone

Similar Messages

Maybe you are looking for