Error "Package in non-original system only modifiabl with Organizer Tools"

Assign Customer Objcet PROG to Package "Z001"(created by myself),it pop-up error "Package in non-original system only modifiabl with Organizer Tools"
how can  i deal with this error?
could any warm-hearted fellow give me some tips ?
tks a lot !

Hi sophie,
i think you transported this package from another system to a new system and you are trying to modify the package.
just have a look at below link hop it will help ,otherwise let us know
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm
cheers
shibu

Similar Messages

  • Carry out repairs in non-original system only if they are urgent

    Hi Experts,
    I am getting this message "Carry out repairs in non-original system only if they are urgent" while i try to edit a z function module which i have created in the development system. Because of this I can't change the code, I need to use the insert, delete....buttons.
    Please help , itz urgent.
    Thanks & Regards,
    Soumya.

    Hello Soumya
    Obviously the Z-function module was originally created on another development system. Therefore you get this message.
    If you have transferred your function group to another development system then simply change the source system of the function group. You can do this using transaction SE03 (function "Change Object Entries...") or you can use function module TRINT_TADIR_MODIFY.
    Regards,
      Uwe

  • Msg in Dev Box - Carry out repairs in non-original system only if urgent

    Hi, I noticed that I am getting the message "Carry out repairs in non-original system only if they are urgent" when I try to edit certain DTP's in my Development BW Envirionment.  This is very unexpected and caught me by surprise. 
    1. Can anyone tell me what might be causing this?
    2. Can anyone tell me what Table I might be able to peruse and determine what the source system is for this DTP?
    Thanks for any help with this...

    HI
    You will get this warning for when modifying an object in ANY system, if that object was not created in that system, but transported from some other system. So, you will get this warning in your Quality/Test/Production systems for the objects which are transported from Development system.
    Just ignore if it is in  the DEV SYSTEM OR talk to the system administrator.
    Hope u got it,
    Thanx & Regards,
    RavIChandra
    Edited by: Ravichandra.bi on Dec 8, 2011 4:04 AM
    Edited by: Ravichandra.bi on Dec 8, 2011 8:24 AM

  • Generate Change Pointers in non Original System

    I have developped in the inbound badis a trigger to generate the change pointers in a non-original system.
    Do you know if there is a standard way to generate change pointers in a non-original system?
    Landscape is as follow:
    Original System => Intermediate System => Final System
    I would like to generate change pointers in the Intermediate System to transfer master data into the Final System...

    Hi,
      Thanks for your reply.
      the configuration for change pointers is already done, the problem is that if changes are send from the original system, it doesn't generate a change pointer in the intermediate system.
      In the end, the intermediate system doesn't send the information to the final system as there are no change pointers generated by the changes received from the original system.
      What I'm doing at the moment is to generate those change pointers in the inbound badi in the intermadiate system, I'm wondering if there is not a standard solution for this kind of implementation.
    Cheers,
    Lucien.

  • When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

    When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

    Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
      <author name="PrintUI.com"/>
      <description/>
      <license-agreement/>
      <products>
        <product maxversion="" name="InDesign" primary="true" version="7.0"/>
      </products>
      <files>
        <file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
      </files>
      <update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
    </macromedia-extension>

  • Error while connecting to external system in SM59 with ICM_HTTP_SSL_ERROR

    Hi all,
    we have configured an SM59 RFC destination of G type which pings to the external third party server. Before testing we have uploaded the external server certificate in PI system. it was working fine with * HTTP 200 OK* message. since 2 days we are facing the ICM_HTTP_SSL_ERROR while testing the connection. when we telnet from PI to the external system using the port no.443, its getting connected.
    so any idea why it started giving the error.
    We have check out this forums but of no help.
    [ICM_HTTP_SSL_ERROR|ICM_HTTP_SSL_ERROR;
    The trace file dev_icm says
    [Thr 52] Thu Jan 20 14:34:00 2011
    [Thr 52] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_CONNECTION_LOST
    [Thr 52]    session uses PSE file "/usr/sap/XD1/DVEBMGS00/sec/SAPSSLDRV.pse"
    [Thr 52] No Secude Error present in trace stack!
    [Thr 52]   SSL_get_state() returned 0x00002141 "SSLv3 read server key exchange B"
    [Thr 52]   SSL NI-sock: local=192.168.127.70:65243  peer=80.78.2.187:443
    [Thr 52] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000d50fd0)==SSSLERR_SSL_CONNECT
    [Thr 52] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00370a03} [icxxconn_mt.c 1957]
    [Thr 81] Thu Jan 20 14:34:15 2011
    [Thr 81] IcmWorkerThread: end worker thread 53
    [Thr 80] Thu Jan 20 14:44:45 2011
    [Thr 80] IcmWorkerThread: end worker thread 52
    Thanks,
    Asem

    Hareen,
    We checked the the note 1318906 and followed the steps but error persists.
    Could you please advice more on this.
    Rahul,
    The note you mentioned is for different error "ICM_HTTP_INTERNAL_ERROR".
    Br
    Asem

  • Carry out repairs in non-original....

    I am trying to update a few programs that are z programs but I get the follow message each time I go into edit mode:
    'Carry out repairs in non-original systems only if they are urgent'.
    Is there a way for me to get rid of this message?  I can't figure out how to update these programs.
    Regards,
    Davis

    It is in change mode but I can't make any changes.  I have to click the button that says INSERT and that inserts the following code:
    [code]*{   INSERT         &$&$&$&$                                          1
    *}   INSERT[/code]
    So each time I need to insert code I would have to click on this button which doesn't seem right to me.
    Regards,
    Aaron

  • MESSAGE ERROR: WIP a target cost only possible with Product Cost by Period

    I work with orders assign to WBS Element (Non-valuated stock).
    If I enter confirmation to an order created, and then execute KKAX transaction to calculate WIP, the system shows this error message u201Cu2018WIP a target cost only possible with Product Cost by Periodu2019u201D, but actually the result has been calculated ok.
    If WIP is executed collectively KKAO the error message is the same but the result is not calculated
    Everything suggests that what we want is possible, but the error doesnu2019t disappear
    Does anyone know what could be reason for the error?
    Thanks

    Hi
    Check your RA key and WIP customizing... WIP at target cost is possible only in Product cost by period
    Check your settlement rule in Prod Order.. I guess it would be FUL and not PER.. FUL settlement means you are in product cost by order.. There seems to be a mismatch between your settlement type (FUL/PER) and WIP config
    Moreover, if your stock is non valuated, do you at all need to calculate WIP for prod orders? I dont think so
    Ajay M

  • Non Admin System User in Oracle Linux

    When installing OL 6-3 I am asked to specify the root user and at the end of the installation a non admin system user.
    I am slightly confused as to the purpose of this non admin system user.
    Q1. What is if for / not for and how does it differ from root ?
    Q2. Is is really just the Desktop Admin user ( whereas root is the superuser for the server as a whole ) ?
    Q3. Now that I have specified this non admin user - how do I change this role to another user I have created ( I made a poor choice of username in the first place ! ) i.e. does this non system admin user have any specially designated roles or privileges at Linux level, which I need to enable on the other user that I now wish to be the non admin system user ?
    Advice greatly appreciated,
    Jim

    Jimbo wrote:
    When installing OL 6-3 I am asked to specify the root user and at the end of the installation a non admin system user.
    I am slightly confused as to the purpose of this non admin system user.
    Q1. What is if for / not for and how does it differ from root ?The viewpoint on modern *nix is that:
    - Logging in remtoely directly as root is often a bad thing to be discouraged, and may pose a security threat.
    - Generally logging in as root is a bad thing; best practice is to acquire superuser privileges only when needed.
    This is so much so that some (most?) distributions are preventing a direct login by root at all, and then need a
    >
    Q2. Is is really just the Desktop Admin userNo really, essentially each user can maintain (administer) his own desktop ... though I expect there are ways of restricting this.
    ( whereas root is the superuser for the server as a whole ) ?This is essentially true.
    >
    Q3. Now that I have specified this non admin user - how do I change this role to another user I have created ( I made a poor choice of username in the first place ! ) i.e. does this non system admin user have any specially designated roles or privileges at Linux level, which I need to enable on the other user that I now wish to be the non admin system user ?most gui tools running on root will realise root privileges are needed and ask for it.
    From a terminal window:
    To change to the root user use:
    su -
    to check to another user you may:
    su - otheruser
    ...... However this user may have trouble running a graphical program ...
    ( The alternative ssh -X otheruser@localhost .... is a simple way round this)
    >
    Advice greatly appreciated,
    JimJust as I finished preparing this I noticed Dude has already answered. I think we're saying essentially the same thing. I've fleshed things out a little more. Please be aware I could be had up for technical/conceptual inaccuracies in my reply; so please take as a general direction.

  • Migration of SAP Workflow to non-SAP system

    Hi All,
    If there is a SAP Standard or custom Business Workflow in SAP system and if we want to implement the same business flow in some non-SAP system(EX: Oracle Apps,Workflow tools etc.,) where Workflows can be used...
    Can we migrate the SAP workflow into that system (non-SAP) by converting to the SAP Workflow template in xml or other format that supports the non-SAP system?
    Can the above said scenario be done?
    Or what is the process of Migrations of Workflows from SAP to non-SAP or Vice versa.?
    Thanks in advance
    Hraish Kollipara

    Hi,
    From your posting what I can understand is you want to model the same Process in other System e.g. Oracle Apps  which is already modeled and working properly in SAP system. I wonder if its possible to download the template from a system and use it in other. As per my knowledge every system has its own development Engine which is configured to work in a specified way. So if its possible then its really time saving.
    Regards,
    Vaishali.
    Edited by: Vaishali Rautray on Nov 20, 2009 5:20 PM

  • Restore original Sony firmware on Xperia Z with Linux tools

    Hello,
    I tried Cyanogenmod 10.2 Milestone and after that my IMEI was gone and I could not make calls any longer.
    I now would like to restore the original Sony firmware for my Xperia Z. But, I do not use and do not have MS Windows. I have the Android SDK installed.
    How can I restore the original Sony firmware just with Linux tools? Can I do that with the Android SDK?
    Thank you in advance.

    GREAT! I HAVE MY IMEI BACK!!!
    After installing the latest Cyanogenmod I have my IMEI back and the SIM card works again.
    To avoid future problems, how do I backup my IMEI? What folders or files do I need to backup the IMEI?
    Thank you.

  • Error during Upgradation SCM 5.0 to SCM 5.1 Non-Unicode System

    Hi,
    I am Upgrading SCM 5.0 Non-Unicode System to SCM 5.1 Non-unicode on Windows 2003 Server with MSS 2005 DB. During the initial PREPARE (EXTRACTKRN_PRE) phase I am getting an error like
    init
    2010/06/15 07:03:45 PREPARE: START OF PHASE EXTRACTKRN_PRE
    ERROR: Cannot find file 'C:\SCM_2007_Upgrade_Media\51033508_8\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_X86_64_AUPG
    KERNEL.TOC'
    SEVERE ERROR(S) OCCURRED IN EXTRACTKRN_PRE !!!
    The file name it is looking for does not exist in any of the Kernel versions I have checked. If I try to skip this step it is asking for the PASSWORD. How can I get this password? (only from SAP Support or any note?).
    What is the Solution for the above ERROR. Please help.
    Thanks,
    Ajay.

    > I am not posting the question in the same group. I am posting in different groups due the confusion of in which group to post > > and of course to get faster response. All people cant check all the groups to answer. Moreover I am not keeping the questions > open. As soon as I get the answer I am proving the answer in every group and immediately closing the question.
    > So what is the problem with that? I do not think this is creating any inconvenience to any one, just increasing the number of questions in the group.
    This is not wanted as written in the "Rules of engagement". This is a public forum, not a "help desk".
    > OK, As you said If I post only in a single group do you guarantee that you will check every time all the groups to answer my question/ find my question?
    Again, this is a forum where the question are answered on a volunteered basis. "Demanding" help is not the way to go, you can ask for help but there's no guarantee that you'll get an answer. If you urgently need help use the official support channels or get yourself a consultant on-site who can answer all your question instantly.
    > And please paste the URL of those rules that this is wrong. Since I didnt read that.
    It's the first entry in every forum, it contains the "Rules of Engagement" which say:
    Please do not Cross post.
    Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
    Just imagine if everyone like you would paste questions in several forums.
    Markus
    Edited by: Markus Doehr on Jun 15, 2010 5:29 PM
    Edited by: Markus Doehr on Jun 15, 2010 5:30 PM

  • 'Error Occured in the Source System' for Non SAP system

    Hi Gurus,
    We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
    Please suggest me how to proceed for this error for Non SAP Systems?

    Hi,
    Check the RFC connection in SM59 and reactivate the source system again.
    Hope this helps..
    Thank you,
    S R.

  • Hierarchy R3PRODHIER may only be changed in the original system

    Hi Experts
    I have created a new Product Hierarchy in R/3 when i try to replicated them into CRM by using initial replication of DNL_CUST_PROD1.system throwing an error saying :  Hierarchy R3PRODHIER may only be changed in the original system R3LNT200. ....in the SMQ2 before doing initial replication of  DNL_CUST_PROD1 status was green.
    And again i try to replicated the DNL_CUST_PROD1 by  reguest load which has run successfully and 3 blocks are generated then  i run the initial replication of Material but status of initial replication status in waiting. which is not run i mean to say.
    then i again  created a Request load for Object Material and which is run success fully
    but my problem is i did not see the  new hierarchy and products too in Table COMM_PRODUCT
    .and when i see status of the in DNL_CUST_PROD1in R3am1. which is in ABORT .
    Hence i request you could you please help me inorder to make green status of the DNL_CUST_PROD1 in r3am1 so that i can able to nun material successfully
    i would appreciate you help
    thanking you
    Regards
    Swathi

    Hi Swathi,
      I'm assuming this development is copied from your production.
    For example: Go to COMM_PRODUCT table and check the log sys field. Now it will show the Production Logical System. So you need to convert this value.
      After the client copy, basis needs to execute BDLS transaction.  This transaction is used to convert the logical systems in all the Database Tables.
         Perform this conversion only for Client Dependent Tables.
         Execute below conversion in CRM Development Box
                       CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                       ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
          In ECC Development Box
                       CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                       ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
    Regards,
    Bhanu

  • Set ZATTR_PROD may only be changed in the original system

    Please,
    Iu2019ve enhancement the PRODUCT_CUSTOMER2 BADI to change product attribute type when Iu2019m replicating products from ECC to CRM.
    When I try to replicate the material from ECC to CRM thereu2019s the follow error:
    "Set ZATTR_PROD may only be changed in the original system"
    How can I solve it?
    Thanks in advance
    Edited by: Ronaldo Alvarenga on Oct 25, 2010 11:17 PM

    Hello,
    Maintain an entry for Z* settype in below path:
    SPRO>IMG>CRM>Master Data>Products>Enhancements>Allow Changes to Product Data.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

Maybe you are looking for