Error: Page cannot be displayed when testing BSP application from SE80

Hi:
I am new to SAP 4.7. I need help in running BSP application from SE80. When I run, I am geting error the page cannot be displayed. Can some suggests/advice what are the neccessary steps ahould follow to run BSP application.
Thanks,
Venkat.

Welcome to the forums and welcome to BSP. There are a few things we kindly ask
Take a look at this weblog: <a href="/people/brian.mckellar/blog/2004/06/11/bsp-trouble-shooting-getting-help">BSP Trouble Shooting: Getting Help</a>
That will help you jump several of the hurdles you'll come across as you get started.
As for your problem if you are receiving the message "Service is not active" then you need to go into the transaction SICF in your system and follow the tree (take a look at the path in your browser /sap/bc/...) and select each until you get down to the one you are trying to look at and active it.
If you are getting errors about other ones not activated then do the same for those.
If you are not getting those errors and your browser is simply telling you "Can't find it or something" then in "Internet Options" in your browser advanced tab uncheck the "Show Friendly HTTP Errors".
You can also check transaction ST22 to see if there is a short dump in which case that will help analyze the problem.
Otherwise you'll need to give us more info including your SP level (recommend you jump up to at least 43 on ABA and BASIS)
Message was edited by: Craig Cmehil
OK so Brian was faster...

Similar Messages

Error when testing BSP application in SE80

Hi Experts,
When i try to test the connection in se80 and SICF, I am getting the below error, Could you please help me to fix this.
(Server: Netweaver CRM, windows, MSSQL)
Error when processing your request
What has happened?
The URL http://sap0206.sap.xxxxx.com:8002/sap/bc/bsp/sap/crm_ic/auiitems.do was not called due to an error.
Note
The following error text was processed in the system C02 : Access via 'NULL' object reference not possible.
The error occurred on the application server SAP0206_C02_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DO_PREPARE_OUTPUT of program CL_CRM_IC_AUIITEMS_IMPL=======CP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system C02 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server SAP0206_C02_02 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server SAP0206_C02_02 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 300 -u: SAPTCC -l: E -s: C02 -i: SAP0206_C02_02 -w: 0 -d: 20110412 -t: 142205 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi,
Please, post runtime error from ST22.
Best Regards,
Aleh

"Page cannot be displayed" when opening DatabaseControl in Oracle 11g

Hi,
This is a new installation of Oracle 11.2.0.3 on Win 2003 32bit. The install was successful (at least no errors) but I am having a problem with Enterprise Manager. When I go to the web page (https://servername:1158/em) then I receive the error "Page cannot be displayed"
I get this whether I use the servername/localhost/IP in the url.
I ran emctl status dbconsole and it indicated that the service was up and running.
Also tried starting the service through cmd prompt rather than services window and this also shows the service starting up correctly.
I can connect without issue through SQLPLus too.
I would appreciate any guidance on what else to try and what logs to check in order to determine why this is happening.
Thanks

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Enterprise Management » Enterprise Manager which is OEM dedicated forum site.
Regard
Helios

"Error page cannot be displayed" in the Internet Explorer

In BSP application while clicking a button in the server page we are getting "Error page cannot be displayed".
Is this error occurring due to some problem in R3 server or due to some connectivity issues.

server page ?? you must mean your HTMLB page or just web page.
have you checked what does the coding behind that button do ?? did you also check in SICF in folder Error Pages whether there´s a page that has been declared there, but which does not exist ??
.... and don´t repeat the threads !!

Error: "The page cannot be displayed" when trying to login to portal

Hi All;
I can not login to portal, when I click login in portal home page
http:<server_name>/pls/portal , the sso login screen will never come up, producing an error The page cannot be displayed
http://:<server_name>/pls/portal/PORTAL.wwsec_app_priv.login?p_requested_url=PORTAL.home&p_cancel_url=PORTAL.home
BI Components:
Portal:portal is up and running.
Http Server is up and running.
OC4J_Portal is up and running
Any one has an idea ?
Thanks.

Try the troubleshooting documentation:
- http://download.oracle.com/docs/cd/B14099_19/portal.1014/b19305/cg_app_k.htm#sthref2513
Mick.

Preview error Page Cannot be Displayed in transaction SBWP

When I workflow item is selected in SBWP, the preview section is not displayed. The preview section should show the description of the document and the objects and attachments to the archivelink document. Instead it gives the error that the page cannot be displayed. This is only happening to one user, so my assumption is this related to a machine or software setting. We have reinstalled SAP, but that did not resolve the issue.

Hi,
It is related to their SAPGUI release & patch level or their version of Internet Explorer. Apply the latest SAPGUI patch on the users machine and it should solve the issue. If not check what version of IE they are using compared to everyone else...perhaps they need a new version also.
Regards,
Eddie

'The page cannot be displayed' when I use IE to open Web Dynpro demo

In the package 'SWDP_DEMO_TUTORIALS' .
Folder Web Dynpro Applicat. -> WDT_ALV ==> URL = 'http://abcdev.:8000/sap/bc/webdynpro/sap/wdt_alv'
then Right click and choose Test.
IE is open but 'The page cannot be displayed'. (http://abcdev.:8000/sap/bc/webdynpro/sap/wdt_alv?sap-client=210&sap-language=EN)
1. I actived neccessary service in SICF already. (http://forum.consolut.net/viewtopic.php?f=8&t=1313)
2. C:\WINDOWS\system32\drivers\etc -> hosts file has 2 record.
127.0.0.1 localhost
HP002264446493 HP002264446493
I think I have to add the SAP server IP
So I click at menu bar -> System -> Status and press Other Kernel info. (Green)
==>> I get Host = abcdev and IP address = 10.74.XX.YY
After that, I add the 10.74.XX.YY abcdev to be the last line.
Is it correct?
3. No data in table HTTPURLLOC.
4. ECC 6 and I never installed Netweaver.
PS. I create my own web dynpro but the layout is not working 'The page cannot be displayed' .
Thank you very much.

I change host file to 'abcdev.' but it does not work.
If I use command 'ping -t 10.74.XX.YY' , it's ok.
If I use ping -t abcdev.:8000, it's not working.
PS. IE version 6 and Connection -> Lan settings ==> Not set anything.
Help me please!!!
Edited by: marshi on Feb 8, 2011 2:34 PM

Just installed LMS 3.2 and get "Page Cannot Be Displayed" when trying to access it.

I installed CiscoWorks LMS 3.2 on a Server 2008 SP1 machine. Installation went fine. I am using IE 7.0 on the server to access LMS 3.2. I get the web interface for the unsecure site but when I provide my login credentials, I get redirected to the 443 site and the generic IE Page Cannot Be Displayed is returned.

Could be CSCtb17186:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb17186
https://supportforums.cisco.com/message/1328649#1328649
Also, LMS 3.2 calls for manually setting the amount of swap on Win2k8:
https://supportforums.cisco.com/message/680507#680507

Page cannot be displayed after login to applications

Hi,
On trying to login to self services, the browser returns "Page cannot be displayed". I checked the apache error_log and it says
File does not exist: /ins01_app01/EUROPA/europacomn/portal/EUROPA_camvmowt2/favicon.ico
[Thu Sep 17 03:42:35 2009] [notice] caught SIGTERM, shutting down
I bounced apache, but did not help.
I ran autoconfig and it was successful.
I tried to open aoljtest.jsp page "http://...../OA_HTML/jsp/fnd/aoljtest.jsp" and it renders correctly.
Any help will be greatly appreciated.
Thanks,
Moni

Hi,
What is the application release?
Was this working before? If yes, what changes have been done recently?
Please verify that no errors can be found in the database log file.
If the document referenced above did not help, I would suggest you enable debug to collect more details about the error -- See (249669.1 - How To Collect Apache and Jserv Debugging Details For Applications 11i) for details.
Regards,
Hussein

Dreamweaver Form Won't Submit- Says Error page cannot be displayed

My dreamweaver form won't submit because it says there is an error. Am I doing something wrong? I don't know much about forms and how they submit but I heard that in order for their to be a confirmation page I have to create a php page? Here's my code. Thanks!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Rental and Availability Information</title>
<style type="text/css">

</style>
<link href="CSS Styles/ActivBorder.css" rel="stylesheet" type="text/css" />
<link href="CSS Styles/border.css" rel="stylesheet" type="text/css" />
<style type="text/css">

</style>
</head>
<body>
<form id="form2" name="form2" method="post" action="inquiryreceipt.html">
<table width="556" border="0" align="center" cellspacing="0" bgcolor="#003366" class="ImageBorder">
    <tr>
      <td colspan="3" valign="top"><div align="center" class="style50"><u>Rental and Availability Information</u></div></td>
    </tr>
    <tr>
      <td width="189"><div align="right" class="style18 style57"><span class="style21">Name:</span></div></td>
      <td colspan="2"><input name="name" type="text" id="name" size="50" maxlength="100" /></td>
    </tr>
    <tr>
      <td><div align="right" class="style18 style57"><span class="style21">Property of Interest: </span></div></td>
      <td colspan="2"><label>
        <select name="property" size="1" id="property">
          <option>Butte Creek</option>
          <option>Casa De Ladrillo</option>
          <option>Collins Island</option>
          <option>The Crosby Estate</option>
          <option>Kailua Beach</option>
          <option>Keefer Ranch</option>
          <option>Koko Head</option>
          <option>Rancho Mirage</option>
          <option>San Diego Luxury High Rise</option>
          <option>Santiago Canyon</option>
          <option>South Lake Tahoe</option>
        </select>
      </label></td>
    </tr>
    <tr>
      <td><div align="right" class="style18 style57"><span class="style21">Dates:</span></div></td>
      <td width="83" align="right" bgcolor="#003366"><div align="right" class="style58">
        <div align="right"><span class="style21">Arrival:</span></div>
      </div></td>
      <td width="270" align="left" bgcolor="#003366" class="FormBorder"><strong>
        <select name="smonth" id="smonth">
          <option>Month</option>
          <option value="January">January</option>
          <option value="February">February</option>
          <option value="March">March</option>
          <option value="April">April</option>
          <option value="May">May</option>
          <option value="June">June</option>
          <option value="July">July</option>
          <option value="August">August</option>
          <option value="Semptember">September</option>
          <option value="Octover">October</option>
          <option value="November">November</option>
          <option value="December">December</option>
        </select>
        <select name="select" id="select">
          <option>Day</option>
          <option value="1">1</option>
          <option value="2">2</option>
          <option value="3">3</option>
          <option value="4">4</option>
          <option value="5">5</option>
          <option value="6">6</option>
          <option value="7">7</option>
          <option value="8">8</option>
          <option value="9">9</option>
          <option value="10">10</option>
          <option value="11">11</option>
          <option value="12">12</option>
          <option value="13">13</option>
          <option value="14">14</option>
          <option value="15">15</option>
          <option value="16">16</option>
          <option value="17">17</option>
          <option value="18">18</option>
          <option value="19">19</option>
          <option value="20">20</option>
          <option value="21">21</option>
          <option value="22">22</option>
          <option value="23">23</option>
          <option value="24">24</option>
          <option value="25">25</option>
          <option value="26">26</option>
          <option value="27">27</option>
          <option value="28">28</option>
          <option value="29">29</option>
          <option value="30">30</option>
          <option value="31">31</option>
        </select>
        <strong><strong>
        <select name="select2" id="select2">
          <option>Year</option>
          <option value="2002">2002</option>
          <option value="2003">2003</option>
          <option value="2004">2004</option>
          <option value="2005">2005</option>
          <option value="2006">2006</option>
          <option value="2007">2007</option>
          <option value="2003">2008</option>
        </select>
        </strong></strong>      </strong>
      <div align="left"></div>      <div align="left"></div></td>
    </tr>
    <tr>
      <td><span class="style57"></span></td>
      <td bgcolor="#003366"><div align="right" class="style58">
        <div align="right"><span class="style21">Departure:</span></div>
      </div></td>
      <td align="left" valign="middle" bgcolor="#003366" class="FormBorder"><strong>
        <select name="smonth" id="smonth">
          <option>Month</option>
          <option value="January">January</option>
          <option value="February">February</option>
          <option value="March">March</option>
          <option value="April">April</option>
          <option value="May">May</option>
          <option value="June">June</option>
          <option value="July">July</option>
          <option value="August">August</option>
          <option value="Semptember">September</option>
          <option value="Octover">October</option>
          <option value="November">November</option>
          <option value="December">December</option>
        </select>
        <select name="sday" id="sday">
          <option>Day</option>
          <option value="1">1</option>
          <option value="2">2</option>
          <option value="3">3</option>
          <option value="4">4</option>
          <option value="5">5</option>
          <option value="6">6</option>
          <option value="7">7</option>
          <option value="8">8</option>
          <option value="9">9</option>
          <option value="10">10</option>
          <option value="11">11</option>
          <option value="12">12</option>
          <option value="13">13</option>
          <option value="14">14</option>
          <option value="15">15</option>
          <option value="16">16</option>
          <option value="17">17</option>
          <option value="18">18</option>
          <option value="19">19</option>
          <option value="20">20</option>
          <option value="21">21</option>
          <option value="22">22</option>
          <option value="23">23</option>
          <option value="24">24</option>
          <option value="25">25</option>
          <option value="26">26</option>
          <option value="27">27</option>
          <option value="28">28</option>
          <option value="29">29</option>
          <option value="30">30</option>
          <option value="31">31</option>
        </select>
        <strong> <strong><strong>
        <select name="syear" id="syear">
          <option>Year</option>
          <option value="2002">2002</option>
          <option value="2003">2003</option>
          <option value="2004">2004</option>
          <option value="2005">2005</option>
          <option value="2006">2006</option>
          <option value="2007">2007</option>
          <option value="2003">2008</option>
        </select>
        </strong></strong></strong>      </strong></td>
    </tr>
    <tr>
      <td><div align="right" class="style18 style57"><span class="style21">Email:</span></div></td>
      <td colspan="2"><input name="email" type="text" id="email" size="50" maxlength="50" /></td>
    </tr>
    <tr>
      <td><div align="right" class="style18 style57"><span class="style21">Phone: </span></div></td>
      <td colspan="2"><input name="phone" type="text" id="phone" size="30" maxlength="30" /></td>
    </tr>
    <tr>
      <td height="204" valign="top" bgcolor="#003366"><div align="right" class="style18 style57"><span class="style21">Additional Info: </span></div></td>
      <td colspan="2" bgcolor="#003366"><label>
        <textarea name="info" cols="40" rows="10" id="info"></textarea>
      </label></td>
    </tr>
    <tr bgcolor="#660000" class="FormBorder">
      <td height="33" valign="middle" bgcolor="#003366"><label for="Submit"></label>
          <label for="label3"></label></td>
      <td colspan="2" align="center" valign="middle" bgcolor="#003366"><div align="left">
          <input type="reset" name="Reset" value="Clear" id="Submit" />
          <input type="submit" name="Submit" value="Submit" id="label3" />
      </div></td>
    </tr>
    <tr bgcolor="#660000" class="FormBorder">
      <td height="33" valign="middle" bgcolor="#003366"><div align="left" class="style43"><span class="style29 style44"><strong>«</strong></span> <a href="Index.html" class="style60"><span class="style61 style21"><u>HOME</u></span></a></div></td>
      <td colspan="2" align="center" valign="middle" bgcolor="#003366"> </td>
    </tr>
</table>
<div align="center"><span class="style42">©<strong><a href="Index.html">TheBestSpots.com</a>   Phone: (800) 761-9819 Fax: (949) 851-0450 <a href="mailto:[email protected]"><br />
[email protected]</a></strong></span> </div>
</form>
</body>
</html>

I believe my it guys have php on their server. When I look on the internet
to try and use the form to test it, I get the error:
The website cannot display the page
HTTP 500
Most likely causes:
The website is under maintenance.
The website has a programming error.
What you can try:
Refresh the page.
Go back to the previous page.
Here's one php code I have linked to one of my documents:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
<style type="text/css">

</style>
</head>
<body>
<div align="center">
<table width="780" height="150" border="1" class="ThankYou">
    <tr>
      <td valign="middle"><div align="center">
        <p class="style4">Thank You For Submitting Your Comments!</p>
        <p>-The Best Spots<br />
          Luxury Vacation Rentals</p>
      </div></td>
    </tr>
</table>
<p align="left"><img src="BOPIcon copy.gif" alt="BirdOfParadise" width="36" height="36" /><span class="style3"><a href="Index.html">TheBestSpots.com </a></span></p>
</div>
<p>
<?php
$txtToAddr = '[email protected]' ;
   $txtSubj = 'Guest Comment From '. $_POST['fname'] . ' ' . $_POST['lname'] . ' email '. $_POST['email'] . ' Property' . $_POST['property'] ;
$txtFromAddr = $_POST['email'];
$txtBody = $startdate = $_POST['smonth'] . $_POST['sday'] . $_POST['syear'] . ' ' . $enddate = $_POST['emonth'] . $_POST['eday'] . $_POST['eyear'] . ' ' . $_POST['comments'] ;
   $headers = 'From: '. $txtFromAddr . "\r\n" .
    'Reply-To: ' . $txtFromAddr . "\r\n" .
    'X-Mailer: PHP/' . phpversion();
    // echo " Thank you for you request. You will be contacted within 1 business day.";
    mail( "$txtToAddr", "$txtSubj", "$txtBody", "$headers");
?>
</p>
<p> </p>
<p> </p>
</body>
</html>
And here's the other php code I have linked to the other:
<?php
$FM_VERS = "8.05";      // script version
/* ex:set ts=4 sw=4 et:
* FormMail PHP script from Tectite.com. This script requires PHP 4 or later.
* Copyright (c) 2001-2008 Root Software and Open Concepts Pty Ltd
* (ABN 93 003 733 499), Melbourne, Australia.
* This script is free for all use as described in the "Copying and Use" and
* "Warranty and Disclaimer" sections below.
* Visit us at http://www.tectite.com/ for updates and more information.
*** If you use Tectite FormMail, please support its development and other
*** freeware products by putting the following link on your website:
*** Visit www.tectite.com for free <a href="http://www.tectite.com/">form processing script</a>.
* Author: Russell Robinson, 2nd October 2001
* Last Modified: RR 14:07 Wed 15 August 2007
* QVCS Version: $Revision: 1.4 $
* Read This First
* ~~~~~~~~~~~~~~~
* This script is very well documented and quite large! It looks daunting,
* but really isn't.
* If you have experience with PHP or other scripting languages,
* here's what you *need* to read:
*      - Configuration (TARGET_EMAIL & DEF_ALERT)
*      - Creating Forms
* That's it! (Alternatively, just read the Quick Start and/or
* Quicker Start section below).
* Full configuration documentation is here:
*      http://www.tectite.com/fmdoc/index.php
* Purpose:
* ~~~~~~~~
* To accept information from an HTML form via HTTP and mail it to recipients.
* What does this PHP script do?
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* On your web site, you may have one or more HTML forms that accept
* information from people visiting your website. Your aim is for your
* website to email that information to you and/or add it to a database.
* FormMail performs those functions.
* Quick Start
* ~~~~~~~~~~~
* 1. Edit this file and set TARGET_EMAIL for your requirements (near
*      line 235 in this file - replace "yourhost\.com" with your mail server's
*      name). We also strongly recommend you set DEF_ALERT (the next
*      configuration below TARGET_EMAIL).
* 2. Install this file as formmail.php (or other name ending in .php)
*     on your web server.
* 3. Create an HTML form and:
*      - specify a hidden field called "recipients" with the email address
*        of the person to receive the form's results.
*      - in the your form tag set the action attribute to
*        the formmail.php you uploaded to your web server
* Once you have FormMail working, you may be interested in some advanced
* usage and features. We have HOW-TO guides at www.tectite.com which
* describe many of the advanced processing you can do with FormMail.
*      http://www.tectite.com/fmhowto/guides.php
* Quicker Start
* ~~~~~~~~~~~~~
* Use the FormMail Configuration Wizard here:
*      http://www.tectite.com/wizards/fmconf.php
* By answering a few questions you'll get a configured FormMail and
* a sample HTML form ready to upload and use on your server.
* Features
* ~~~~~~~~
* For a list of features go to: http://www.tectite.com/formmailpage.php
* Security
* ~~~~~~~~
* Security is the primary concern in accepting data from your website
* visitors.
* Tectite FormMail has several security features designed into it. Note,
* however, it requires configuration for your particular web site.
* Configuration
* ~~~~~~~~~~~~~
* To configure this script, go to the section titled "CONFIGURATION"
* (after reading the legal stuff below).
* There is only one mandatory setting: TARGET_EMAIL
* and one strongly recommended setting: DEF_ALERT
* Full configuration information is available here:
*      http://www.tectite.com/fmdoc/index.php
* Creating Forms
* ~~~~~~~~~~~~~~
* Go to this URL to learn how to write HTML forms for use with
* Tectite FormMail: http://www.tectite.com/fmdoc/creating_forms.php
* Copying and Use
* ~~~~~~~~~~~~~~~
* Tectite FormMail is provided free of charge and may be freely distributed
* and used provided that you:
*      1. keep this header, including copyright and comments,
*         in place and unmodified; and,
*      2. do not charge a fee for distributing it, without an agreement
*         in writing with Root Software allowing you to do so; and,
*      3. if you modify FormMail before distributing it, you clearly
*         identify:
*              a) who you are
*              b) how to contact you
*              c) what changes you have made
*              d) why you have made those changes.
* Warranty and Disclaimer
* ~~~~~~~~~~~~~~~~~~~~~~~
* Tectite FormMail is provided free-of-charge and with ABSOLUTELY NO WARRANTY.
* It has not been verified for use in critical applications, including,
* but not limited to, medicine, defense, aircraft, space exploration,
* or any other potentially dangerous activity.
* By using Tectite FormMail you agree to indemnify Root Software and
* Open Concepts Pty Ltd, their agents, employees, directors and
* associated companies and businesses from any liability whatsoever.
* We still care
* ~~~~~~~~~~~~~
* If you find a bug or fault in FormMail, please report it to us.
* We will respond to your report and make endeavours to rectify any
* faults you've detected as soon as possible.
* To contact us please register on our forums at:
*      http://www.tectite.com/vbforums/
* or view our contact information:
*      http://www.tectite.com/contacts.php
* Version History
* ~~~~~~~~~~~~~~~
* Near the top of this file, you'll find its version. The version
* line looks like this:
*       $FM_VERS = "N.MM";     /* script version ...
* The version history used to be located within this file. However,
* starting with Version 8.00 we've moved it...
* You can read the complete version history of FormMail on our
* main website here:
*   http://www.tectite.com/fmdoc/version_history.php
    // Capture the current date and time, for various purposes.
$lNow = time();
set_magic_quotes_runtime(0);        // disable this silly setting (usually not enabled)
ini_set('track_errors',1);          // enable $php_errormsg
$aAlertInfo = array();
$aPHPVERSION = array();
$sLangID = "";                      // the language ID
$aMessages = array();               // all FormMail messages in the appropriate
                                    // language
$bUseOldVars = IsOldVersion($aPHPVERSION);
    // seed the random number generate if not version 4.2.0 or later
if (!IsPHPAtLeast("4.2.0"))
    mt_srand(time());
    // we set references to the appropriate arrays to handle PHP version differences
    // Session vars are selected after we start the session.
if ($bUseOldVars)
    $aServerVars = &$HTTP_SERVER_VARS;
    $aGetVars = &$HTTP_GET_VARS;
    $aFormVars = &$HTTP_POST_VARS;
    $aFileVars = &$HTTP_POST_FILES;
    $aEnvVars = &$HTTP_ENV_VARS;
else
    $aServerVars = &$_SERVER;
    $aGetVars = &$_GET;
    $aFormVars = &$_POST;
    $aFileVars = &$_FILES;
    $aEnvVars = &$_ENV;
$bIsGetMethod = false;
    // If the form submission was using the GET method, switch to the
    // GET vars instead of the POST vars
if (isset($aServerVars["REQUEST_METHOD"]) && $aServerVars["REQUEST_METHOD"] === "GET")
    $bIsGetMethod = true;
    if ($bUseOldVars)
        $aFormVars = &$HTTP_GET_VARS;
    else
        $aFormVars = &$_GET;
if (!isset($REAL_DOCUMENT_ROOT))
    SetRealDocumentRoot();
if (isset($aServerVars['SERVER_PORT']))
    $SCHEME = ($aServerVars['SERVER_PORT'] == 80) ? "http://" : "https://";
else
    $SCHEME = "";
if (isset($aServerVars['SERVER_NAME']))
    $SERVER = $aServerVars['SERVER_NAME'];
else
    $SERVER = "";
/* CONFIGURATION (do not alter this line in any way!!!)                      */
* This is the *only* place where you need to modify things to use formmail.php
* on your particular system. This section finishes at "END OF CONFIGURATION".
* Help for all settings can be found on our website:
* http://www.tectite.com/fmdoc/index.php
* Also, above each setting is a direct URL to the help information for the
* setting.
            /* Help: http://www.tectite.com/fmdoc/email_name.php */
define("EMAIL_NAME","^[-a-z0-9.]+");    // the '^' is an important security feature!
            /* Help: http://www.tectite.com/fmdoc/target_email.php */
$TARGET_EMAIL = array(EMAIL_NAME."@thebestspots\.com$");
            /* Help: http://www.tectite.com/fmdoc/def_alert.php */
define("DEF_ALERT","[email protected]");
            /* Help: http://www.tectite.com/fmdoc/set_real_document_root.php */
$SET_REAL_DOCUMENT_ROOT = "";       // overrides the value set by SetRealDocumentRoot function
    // override $REAL_DOCUMENT_ROOT from the $SET_REAL_DOCUMENT_ROOT value (if any)
    // Do not alter the following code (next 3 lines)!
if (isset($SET_REAL_DOCUMENT_ROOT) && $SET_REAL_DOCUMENT_ROOT !== "")
    $REAL_DOCUMENT_ROOT = $SET_REAL_DOCUMENT_ROOT;
            /* Help: http://www.tectite.com/fmdoc/config_check.php */
$CONFIG_CHECK = array("TARGET_EMAIL");
            /* Help: http://www.tectite.com/fmdoc/at_mangle.php */
define("AT_MANGLE","5VLNXQL");
            /* Help: http://www.tectite.com/fmdoc/target_urls.php */
$TARGET_URLS = array();         // default; no URLs allowed
            /* Help: http://www.tectite.com/fmdoc/head_crlf.php */
define("HEAD_CRLF","\r\n");
            /* Help: http://www.tectite.com/fmdoc/body_lf.php */
define("BODY_LF","\r\n");       // the new default: use this for CR+LF
//define("BODY_LF","\n");       // the old default: just LF
            /* Help: http://www.tectite.com/fmdoc/from_user.php */
$FROM_USER = "";                            // the default - setting not used
            /* Help: http://www.tectite.com/fmdoc/sendmail_f_option.php */
define("SENDMAIL_F_OPTION",false);
define("SENDMAIL_F_OPTION_LINE",__LINE__-1);    // don't modify this line!
            /* Help: http://www.tectite.com/fmdoc/fixed_sender.php */
$FIXED_SENDER = "";
            /* Help: http://www.tectite.com/fmdoc/set_sender_from_email.php */
define("SET_SENDER_FROM_EMAIL",false);
            /* Help: http://www.tectite.com/fmdoc/ini_set_from.php */
define("INI_SET_FROM",false);
            /* Help: http://www.tectite.com/fmdoc/logdir.php */
$LOGDIR = "";                           // directory for log files; empty string to
                                        // disallow log files
            /* Help: http://www.tectite.com/fmdoc/autorespondlog.php */
$AUTORESPONDLOG = "";           // file name in $LOGDIR for the auto responder
                                // log; empty string for no auto responder log
            /* Help: http://www.tectite.com/fmdoc/csv_file_settings.php */
$CSVDIR = "";                       // directory for csv files; empty string to
                                    // disallow csv files
$CSVSEP = ",";      // comma separator between fields (columns)
$CSVINTSEP = ";";   // semicolon is the separator for fields (columns)
                    // with multiple values (checkboxes, etc.)
$CSVQUOTE = '"';    // all fields in the CSV are quoted with this character;
                    // default is double quote. You can change it to
                    // single quote or leave it empty for no quotes.
//$CSVQUOTE = "'"; // use this if you want single quotes
$CSVOPEN = "";      // set to "b" to force line terminations to be
                    // kept as $CSVLINE setting below, regardless of
                    // operating system. Keep as empty string and
                    // leave $CSVLINE unchanged, to get text file
                    // terminations for your server's operating system.
                    // (Line feed on UNIX, carriage-return line feed on Windows).
$CSVLINE = "\n";    // line termination for CSV files. The default is
                    // a single line feed, which may be modified for your
                    // server's operating system. If you want to change
                    // this value, you *must* set $CSVOPEN = "b".
            /* Help: http://www.tectite.com/fmdoc/templatedir.php */
$TEMPLATEDIR = "";                  // directory for template files; empty string
                                    // if you don't have any templates
            /* Help: http://www.tectite.com/fmdoc/templateurl.php */
$TEMPLATEURL = "";                  // default; no template URL
            /* Help: http://www.tectite.com/fmdoc/multiformdir.php */
$MULTIFORMDIR = "";         // directory for multi-form template files; empty string
                            // if you're not using multi-forms
            /* Help: http://www.tectite.com/fmdoc/multiformurl.php */
$MULTIFORMURL = "";                 // default; no multi-forms templates URL
            /* Help: http://www.tectite.com/fmdoc/authentication_settings.php */
$AUTHENTICATE = "";
//$AUTHENTICATE = "Basic cnVzc2VsbHI6dGVzdA==";        // example
$AUTH_USER = "";
$AUTH_PW = "";
            /* Help: http://www.tectite.com/fmdoc/form_ini_file.php */
$FORM_INI_FILE = "";
            /* Help: http://www.tectite.com/fmdoc/moduledir.php */
$MODULEDIR = ".";
            /* Help: http://www.tectite.com/fmdoc/fmcompute.php */
$FMCOMPUTE = "fmcompute.php";
            /* Help: http://www.tectite.com/fmdoc/fmgeoip.php */
$FMGEOIP = "fmgeoip.php";
            /* Help: http://www.tectite.com/fmdoc/advanced_templates.php */
define("ADVANCED_TEMPLATES",false);     // set to true for advanced templates
            /* Help: http://www.tectite.com/fmdoc/limited_import.php */
define("LIMITED_IMPORT",true);      // set to true if your database cannot
                                    // handle escaped quotes or newlines within
                                    // imported data. Microsoft Access is one
                                    // example.
            /* Help: http://www.tectite.com/fmdoc/valid_env.php */
$VALID_ENV = array('HTTP_REFERER','REMOTE_HOST','REMOTE_ADDR','REMOTE_USER',
                'HTTP_USER_AGENT');
            /* Help: http://www.tectite.com/fmdoc/fileuploads.php */
define("FILEUPLOADS",false);        // set to true to allow file attachments
            /* Help: http://www.tectite.com/fmdoc/max_file_upload_size.php */
define("MAX_FILE_UPLOAD_SIZE",0);       // default of 0 means that other software
                                        // controls the maximum file upload size
                                        // (FormMail doesn't test the file size)
            /* Help: http://www.tectite.com/fmdoc/file_repository.php */
$FILE_REPOSITORY = "";
            /* Help: http://www.tectite.com/fmdoc/file_mode.php */
define("FILE_MODE",0664);     // always precede with 0 to specify octal!
            /* Help: http://www.tectite.com/fmdoc/file_overwrite.php */
define("FILE_OVERWRITE",true);
            /* Help: http://www.tectite.com/fmdoc/next_num_file.php */
$NEXT_NUM_FILE = "";
            /* Help: http://www.tectite.com/fmdoc/put_data_in_url.php */
define("PUT_DATA_IN_URL",true); // set to true to place data in the URL
                                    // for bad_url redirects
            /* Help: http://www.tectite.com/fmdoc/db_see_input.php */
define("DB_SEE_INPUT",false);       // set to true to just see the input values
            /* Help: http://www.tectite.com/fmdoc/db_see_ini.php */
define("DB_SEE_INI",false);     // set to true to just see the ini file
            /* Help: http://www.tectite.com/fmdoc/maxstring.php */
define("MAXSTRING",1024);           // maximum string length for a value
            /* Help: http://www.tectite.com/fmdoc/bshowmesgnumbers.php */
$bShowMesgNumbers = false;
            /* Help: http://www.tectite.com/fmdoc/filters.php */
            /* Note for Tectite personnel: the upgrade Wizard will merge new values
             * but be careful of $var usage and quoting in new entries.
$FILTERS = array("encode"=>"$REAL_DOCUMENT_ROOT/cgi-bin/fmencoder -kpubkey.txt",
                "null"=>"null",
                "csv"=>"csv");
            /* Help: http://www.tectite.com/fmdoc/socket_filters.php */
$SOCKET_FILTERS = array(
                 "httpencode"=>array("site"=>"YourSiteHere",
                    "port"=>80,
                    "path"=>"/cgi-bin/fmencoder",
                    "params"=>array(array("name"=>"key",
                            "file"=>"$REAL_DOCUMENT_ROOT/cgi-bin/pubkey.txt"))),
                 "sslencode"=>array("site"=>"ssl://YourSecureSiteHere",
                    "port"=>443,
                    "path"=>"/cgi-bin/fmencoder",
                    "params"=>array(array("name"=>"key",
                            "file"=>"$REAL_DOCUMENT_ROOT/cgi-bin/pubkey.txt"))),
            /* Help: http://www.tectite.com/fmdoc/filter_attribs.php */
$FILTER_ATTRIBS = array("encode"=>"Strips,MIME=application/vnd.fmencoded,Encrypts",
                        "httpencode"=>"Strips,MIME=application/vnd.fmencoded,Encrypts",
                        "sslencode"=>"Strips,MIME=application/vnd.fmencoded,Encrypts",
                        "csv"=>"Strips,MIME=text/csv",);
            /* Help: http://www.tectite.com/fmdoc/check_for_new_version.php */
define("CHECK_FOR_NEW_VERSION",true);
define("CHECK_DAYS",30);
            /* Help: http://www.tectite.com/fmdoc/scratch_pad.php */
$SCRATCH_PAD = "";
            /* Help: http://www.tectite.com/fmdoc/cleanup_time.php */
$CLEANUP_TIME = 60;     // cleanup time in minutes
            /* Help: http://www.tectite.com/fmdoc/cleanup_chance.php */
$CLEANUP_CHANCE = 20;     // percentage probability that cleanup will be performed
            /* Help: http://www.tectite.com/fmdoc/pear_settings.php */
$PEAR_SMTP_HOST = "";
$PEAR_SMTP_PORT = 25;
$PEAR_SMTP_USER = "";
$PEAR_SMTP_PWD = "";
            /* Help: http://www.tectite.com/fmdoc/alert_on_user_error.php */
define("ALERT_ON_USER_ERROR",true);
            /* Help: http://www.tectite.com/fmdoc/enable_attack_detection.php */
define("ENABLE_ATTACK_DETECTION",true);
            /* Help: http://www.tectite.com/fmdoc/attack_detection_url.php */
define("ATTACK_DETECTION_URL","");
            /* Help: http://www.tectite.com/fmdoc/alert_on_attack_detection.php */
define("ALERT_ON_ATTACK_DETECTION",false);
            /* Help: http://www.tectite.com/fmdoc/attack_detection_mime.php */
define("ATTACK_DETECTION_MIME",true);
            /* Help: http://www.tectite.com/fmdoc/attack_detection_dups.php */
$ATTACK_DETECTION_DUPS = array("realname","address1","address2","country","zip",
                                "phone","postcode","state","email");
            /* Help: http://www.tectite.com/fmdoc/attack_detection_specials.php */
define("ATTACK_DETECTION_SPECIALS",true);
            /* Help: http://www.tectite.com/fmdoc/attack_detection_specials.php */
$ATTACK_DETECTION_SPECIALS_ONLY_EMAIL = array("derive_fields","required",
                    "mail_options","good_url","bad_url","good_template",
                    "bad_template");
            /* Help: http://www.tectite.com/fmdoc/attack_detection_specials.php */
$ATTACK_DETECTION_SPECIALS_ANY_EMAIL = array("subject");
            /* Help: http://www.tectite.com/fmdoc/attack_detection_many_urls.php */
define("ATTACK_DETECTION_MANY_URLS",0);
            /* Help: http://www.tectite.com/fmdoc/attack_detection_many_url_fields.php */
define("ATTACK_DETECTION_MANY_URL_FIELDS",0);
            /* Help: http://www.tectite.com/fmdoc/attack_detection_url_patterns.php */
$ATTACK_DETECTION_URL_PATTERNS = array(
            '(^|[^-a-z_.0-9]+)(?<!@)([-a-z0-9]+\.)+(com|org|net|biz|info|name|pro|tel|asia|cat)\b',
            '(^|[^-a-z_.0-9]+)(?<!@)([-a-z0-9]+\.)+(com{0,1}|org|net)\.[a-z][a-z]\b');
            /* Help: http://www.tectite.com/fmdoc/attack_detection_ignore_errors.php */
define("ATTACK_DETECTION_IGNORE_ERRORS",false);
            /* Help: http://www.tectite.com/fmdoc/geoip_lic.php */
$GEOIP_LIC = "";        // default - no GeoIP
            /* Help: http://www.tectite.com/fmdoc/zero_is_empty.php */
define("ZERO_IS_EMPTY",false);
            /* Help: http://www.tectite.com/fmdoc/session_name.php */
$SESSION_NAME = "";
            /* Help: http://www.tectite.com/fmdoc/hook_dir.php */
$HOOK_DIR = "";
/* UPGRADE CONTROL
** FILTERS:lt:8.04:merge:The FILTERS configuration has
** been modified to include some new standard filters.:
** FILTER_ATTRIBS:lt:8.04:no_keep:The FILTER_ATTRIBS configuration has
** been modified to include new information about the standard filters.:
** ATTACK_DETECTION_URL_PATTERNS:eq:8.02:no_keep:The ATTACK_DETECTION_URL_PATTERNS
** configuration has been modified to fix a bug.:
** FILTER_ATTRIBS:lt:4.00:no_keep:The FILTER_ATTRIBS configuration has
** been modified to include new information about the standard filters.:
** SET_REAL_DOCUMENT_ROOT:gt:4.07:copy_from=REAL_DOCUMENT_ROOT:The
** REAL_DOCUMENT_ROOT configuration has been renamed to SET_REAL_DOCUMENT_ROOT.:
** EMAIL_NAME:lt:6.01:no_keep:The EMAIL_NAME configuration has
** been modified to match hyphens ('-') in email addresses.:
** ZERO_IS_EMPTY:le:6.01:set_to=true:ZERO_IS_EMPTY has been
** set to a value that duplicates previous behaviour.:
** END OF CONTROL
/* END OF CONFIGURATION (do not alter this line in any way!!!)               */
    // the following constants define all FormMail messages
define('MSG_SCRIPT_VERSION',0);     // This script requires at least PHP version...
define('MSG_END_VERS_CHK',1);       // If you're happy...
define('MSG_VERS_CHK',2);           // A later version of FormMail is available...
define('MSG_CHK_FILE_ERROR',3);     // Unable to create check file...
define('MSG_UNK_VALUE_SPEC',4);     // derive_fields: unknown value specification...
define('MSG_INV_VALUE_SPEC',5);     // derive_fields: invalid value specification...
define('MSG_DERIVED_INVALID',6);    // Some derive_fields specifications...
define('MSG_INT_FORM_ERROR',7);     // Internal form error...
define('MSG_OPTIONS_INVALID',8);    // Some mail_options settings...
define('MSG_PLSWAIT_REDIR',9);      // Please wait while you are redirected...
define('MSG_IFNOT_REDIR',10);       // If you are not redirected...
define('MSG_PEAR_OBJ',11);          // Failed to create PEAR Mail object...
define('MSG_PEAR_ERROR',12);        // PEAR Mail error...
define('MSG_NO_FOPT_ADDR',13);      // You have specified "SendMailFOption"...
define('MSG_MORE_INFO',14);         // More information...
define('MSG_INFO_STOPPED',15);      // Extra alert information suppressed...
define('MSG_FM_ALERT',16);          // FormMail alert
define('MSG_FM_ERROR',17);          // FormMail script error
define('MSG_FM_ERROR_LINE',18);     // The following error occurred...
define('MSG_USERDATA_STOPPED',19); // User data suppressed...
define('MSG_FILTERED',20);          // This alert has been filtered...
define('MSG_TEMPLATES',21);         // You must set either TEMPLATEDIR or TEMPLATEURL...
define('MSG_OPEN_TEMPLATE',22);     // Failed to open template...
define('MSG_ERROR_PROC',23);        // An error occurred while processing...
define('MSG_ALERT_DONE',24);        // Our staff have been alerted...
define('MSG_PLS_CONTACT',25);       // Please contact us directly...
define('MSG_APOLOGY',26);           // We apologize for any inconvenience...
define('MSG_ABOUT_FORMMAIL',27);    // Your form submission was processed by...
define('MSG_PREG_FAI

UWL giving "Page Cannot be Displayed" when accessed through Internet

Dear all,
We have exposed our portal to Internet and are currently testing the functionality.
All applications are working fine except UWL and Identity Management. UWL is working fine if I'm not using the Webdynpro UI for display.
Later we checked. Only the Webdynpro based applications are having problem when accessing through Internet.
What can be the reason for this? Please help. We are stuck up because of this.
Best Regards,
Aparnna
Edited by: Aparnna Prasad on Aug 13, 2008 2:48 PM

Dear Aparna,
   Please check the following things
   1. Enter the Hosts enteries of R/3 and EP server.
   2. Try to ping the r/3 & EP server outside your network.
Regards
Ponnusamy

Page cannot be displayed error when executing WAD

Hi all,
I'm getting this error (Page cannot be displayed) when i execute my WAD. What is curious is that i can execute it ok i some machines, but some others get the error.
Anyone knows what could be causing this?
I've tried in different machines, all with Win XP sp2 and IE6 browser... and remains the same: some execute the WAD ok, some don't.
I'll appreciate any help on this.
Thank you,
g.

I had the same error and was a PROXY problem....
I fix it setting in IE connetions the access to HTTP://MYSERVER/...ETC....in LAN Configuration->advanced options in IE....it works fine for me....
Regards...

Page cannot be displayed error when login to EBS home page

Hi All,
I have some problem login to EBS page, if only one responsibility is active to user it will get error Page cannot be Displayed error 404 on the Main Menu.
However if 2 or more responsibilities are active no error will come up and it will show all responsibilities.
Below is the log I got from apache.
[Thu Apr 28 15:58:26 2011] [warn] mod_plsql: Stale Connection due to Oracle error 6502
[Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
ORA-06512: at "APPS.ICX_CALL", line 1077
ORA-06512: at "APPS.ORACLENAVIGATE", line 2358
ORA-06512: at line 28
Appreciate if someone can share something about this.
Database Server
RDBMS : 10.2.0.2.0
Oracle Applications : 11.5.10.2
Thanks a lot

Hi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help!

Page cannot be displayed error in Communication channel monitoring

Hi,
when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
I am testing this for the for the first time in QA environment.
But in development , CC monitoring works fine in the same Laptop.
I have checked the hosts file and it has the IP address and system name present in it.
i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
we are using PI 7.0, windows XP and IE 7.0.
Could anyone help to solve this problem?
Thanks
JJ

I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
instead of the FQDN you can also open the page using the IP address of the server.
I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
This may be because you did not mark the thread as a question
Regards,
Abhishek.

View layout is not displaying, ( The page cannot be displayed)

Hi guys,
we have recently installed the ECC6. In webdynpro component, the view layout is not displaying, instead it showing the error message like " the page cannot be displayed".
I came to know that, in order to display the view layout we need to activate some services .
Please let me know what are the services should activate in order to display the layout.
Regards
Srinivas

Hi Sana,
this is very absic problem in webdynpro, lots of threades are there do search..
getting error 'Page cannot be displayed' in view layout
ABAP Web Dynpro : view designer layout error !
Layout Tab Preview: This program cannot display the webpage
Cheers,
Kris.

Error: Page cannot be displayed when testing BSP application from SE80

Similar Messages

Maybe you are looking for