"Error parsing MPEG Metadata file.

I have been using Encore for about 4 years: 1.5 -> 2.
Recently I have had problems with projects exported as an avi file from Premier 2 and used in a simple menu and timeline in Encore 2. Typically projects were about an hour long. Chapter points were added in Encore automatically every 3 mins for general navigation assistance. I checked the project was OK and pressed Build. After watching the video transcoding progress bar creep to 100%, the error message appears immediately the process appears to have completed - "Error parsing MPEG Metadata file. Deleting or renaming filename.m2v.xmpses" will allow you to import, but any markers will be lost". On the previous occasion I went back to the assets, highlighted the avi file and transcoded it manually (automatically). No error message. I then built and burned the DVD.
I have sometimes cured problems by removing any info from the final chapter point - delete the visible info. This may have just solved this last problem despite the initial build being reported as being free of problems. Following the first problem I rechecked and was told there was a problem with the final chapter point. I deleted the chapter point info and it has built and burned satisfactorily.
Two questions.
What is causing this problem. I have burned lots of DVDs over the years with Encore. Is the use of chapter points the cause of the problem. There have been quite a lot of reports of this in other (Matrox) forums. I am using Matrox RTX100. How can I prevent this huge waste of time - a build may take me a couple of hours.
Is it better to export the Premier Pro2 timeline as an avi and use Encore for the transcoding, or is it better to export a trancoded file from Premier directly and just include this in the Encore project. If yes, which format should I export it in. I have the Premier and Matrox transcoding options.
Roger

Not sure if this is causing the error, but since version 2 Encore automatically adds a chapter point on the last available GOP. It could be that the last of your 3 minute chapter markers is closer to this final chapter point than 0.4 seconds. The DVD-Video specification requires chapter points to be at least 0.4 seconds apart.

Similar Messages

Error Parsing MPEG metadata file (repeatedly!)

Hello, I am getting the error message "Error parsing MPEG Metadata file. deleting or renaming <pathname>\cache\temp_transcodes\ss_aJstrm_5\ss_AJstrm_v5.m2v.xmpses" will allow you to import, but any markers will be lost". I have a fairly simple DVD (I think) ..one menu (PAL_Projector-MENU) and 9 slideshows of JPEG images. I start to build a DVD or DVD Folder (tried both). I get "no errors detected" when I do a Project check. I keep cycling through these error messages hoping I am eventually going to get to the end. I delete the files as it suggests, and restart after it forces a save. I have gone round the cycle about 10 times - not sure when it's likley to end. Help anyone? XP Pro SP2, Pentium 4 CPU 3.00 GHz, 2GB RAM. Thanks Mark

M,
Like I said, i don't use encore for slideshows, so I can't really give expert advice on this one. However I do 90% of my video productions with adobe software and 10% with pinnacle. I have had WAY too many issues burning DVD's and Playback issues and rendering issues with pinnacle, however their music video/slide show automation is by far the best out there. Aside from software we'll get back on topic. I would recommend starting a whole new slideshow from scratch. Create a new project, import new photos, etc. Start with the basics to do your trial and error. Don't use a menu, don't loop anything. Just import, set your title button to the first picture, and set the end action to stop. Then try to burn, however instead of wasting discs, try writing an image file, or even just build the dvd folders. Other than that, I'm not too sure what direction to head, but start basic and trial and error everything from that point. If you have msn you can contact me at [email protected] and maybe i can further assist you. Either way, let me know how you make out.

Error parsing xml licence file

I just get a weblogic server 4.5.1 evaluation version CD. I get this errorweblogic.common.LicenseCorruptException: Error parsing XML license file. [java.util.EmptyStackException at java.util.Stack.peek(Stack.java:70) at weblogic.xml.license.Handler.characters(Handler.java:63) at weblogic.xml.license.BaseParser.sendCharacters(BaseParser.java:120) at weblogic.xml.license.BaseParser.eatComment(Compiled Code) at weblogic.xml.license.WEBLOGICLICENSESParser.parse(Compiled Code) at weblogic.xml.license.BaseParser.parse(Compiled Code) at weblogic.common.internal.LicenseInfo.loadXML(Compiled Code) at weblogic.common.internal.ServerUtil.initLogging(Compiled Code) at weblogic.common.internal.ServerUtil.initLogging(ServerUtil.java:82) at weblogic.common.internal.ServerUtil.<clinit>(ServerUtil.java:75) at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:851) at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:790) at weblogic.Server.startServerDynamically(Server.java:87) at weblogic.Server.main(Server.java:61) at weblogic.NTServiceHelper.run(NTServiceHelper.java:19) at java.lang.Thread.run(Thread.java:466)]I also have installed the jdk1.3can anyone tell me the cause ? thanks a lot !

Is there anybody can help. It is urgent. I need to setup the development server ASAP.

Error parsing XML license file

i need assistance while installing WebLogic 5.1 Evaluation version on my NT Server and i also registered and downloaded the key for that but still my server is not functioning as it gives me a license file error in java.....
The error is as follows....
*****Start********
weblogic.common.LicenseCorruptException: Error parsing XML license file. [java.util.EmptyStackException
at java.util.Stack.peek(Stack.java, Compiled Code)
at java.lang.Exception.<init>(Exception.java, Compiled Code)
at java.lang.RuntimeException.<init>(RuntimeException.java, Compiled Code)
at java.util.EmptyStackException.<init>(EmptyStackException.java, Compiled Code)
at java.util.Stack.peek(Stack.java, Compiled Code)
at weblogic.xml.license.Handler.characters(Handler.java:63)
at weblogic.xml.license.BaseParser.sendCharacters(BaseParser.java:120)
at weblogic.xml.license.BaseParser.eatComment(BaseParser.java, Compiled Code)
at weblogic.xml.license.WEBLOGICLICENSESParser.parse(WEBLOGICLICENSESParser.java, Compiled Code)
at weblogic.xml.license.BaseParser.parse(BaseParser.java, Compiled Code)
at weblogic.common.internal.LicenseInfo.loadXML(LicenseInfo.java, Compiled Code)
at weblogic.common.internal.ServerUtil.initLogging(ServerUtil.java, Compiled Code)
at weblogic.common.internal.ServerUtil.initLogging(ServerUtil.java:82)
at weblogic.common.internal.ServerUtil.<clinit>(ServerUtil.java:75)
at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:883)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:822)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
*****End******
The License file i downloaded was from the website as i was told to do so...
I would really appreaciate your help in the above error to solve my problem as i am trying to learn weblogic and am stuck at the very bigenning..
Thanx a lot...

If you can, upgrade your jdbcKona/MSSQLserver4 driver to
at least version 4.5.1.2.
Branka Billante wrote:
>
I am trying to debug my code in VisualCafe and I get the following
error:
java.sql.SQLException: java.sql.SQLException: License Problem:
The following applies to holders of standard BEA/WebXpress licenses:
weblogic.d.h: Error parsing XML license file. [java.lang.Exception:
java.lang.ClassCastException: weblogic.xml.license.WEBLOGICLICENSES
at weblogic.i.g.a(Unknown Source)
at weblogic.i.b.i(Unknown Source)
I am running the exect code in a non-debug enviroment and it works
fine. Does anybody know what the problem could be?
Thanks,
Branka Billante
Moai Technologies, Inc.--
Chuck Karish BEA Systems
[email protected] San Francisco, CA
(415) 317-0182 (cell) (415) 402-7692

Error parsing tag-library file

Anyone know how to tackle this one?
Error parsing JSP page /AnteDateLogin.jsp line 3
Error parsing tag-library file:/u01/web/ias102/j2ee/home/applications/antedate/antedate/WEB-INF/lib/uixtags.jar: Illegal XML character: .
Here is what goes to the console.
ora03 $ at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.javaorg.xml.sax.SAXParseException: Illegal XML character: .
at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1038)
at org.apache.crimson.parser.InputEntity.parsedContent(InputEntity.java:593)
at org.apache.crimson.parser.Parser2.content(Parser2.java:1747)
at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1468)
at org.apache.crimson.parser.Parser2.content(Parser2.java:1700)
at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1468)
at org.apache.crimson.parser.Parser2.content(Parser2.java:1700)
at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1468)
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:499)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:304)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:433)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:179)
at com.evermind.xml.JavaxXMLUtils.getJavaxDocument(JavaxXMLUtils.java:35)
at com.evermind.xml.XMLUtils.getDocument(XMLUtils.java:157)
at com.evermind.server.http.TagLibraryInfoImplBase.parse(TagLibraryInfoImplBase.java:82)
at com.evermind.server.http.TagLibraryInfoImplBase.<init>(TagLibraryInfoImplBase.java:47)
at com.evermind.server.http.TagLibraryArchive.<init>(TagLibraryArchive.java:40)
at com.evermind.server.http.TagLibraryArchive.getArchive(TagLibraryArchive.java:98)
at com.evermind.server.http.TagLibraryStorage.getTagLibContext(TagLibraryStorage.java:183)
at com.evermind.server.http.HttpApplication.getTagLibContext(HttpApplication.java:5897)
at com.evermind.server.http.JSPPageCompilation.addTagLibTag(JSPPageCompilation.java:2229)
at com.evermind.server.http.JSPPageCompilation.compile(JSPPageCompilation.java:278)
at com.evermind.server.http.JSPPage.compile(JSPPage.java:115)
at com.evermind.server.http.HttpApplication.getJSP(HttpApplication.java:5324)
at com.evermind.server.http.HttpApplication.serviceJSP(HttpApplication.java:5423)
at com.evermind.server.http.JSPServlet.service(JSPServlet.java:31)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:508)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:177)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:576)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:62)

Doe anybody have an idea?

Error while exporting metadata file /iam-features-ldap-sync/LDAPUser.xml

Hi All,
i am trying to export /iam-features-ldap-sync/LDAPUser.xml metadata file with the weblogic properties mentioned below
# Weblogic Server Name on which OIM application is running
wls_servername=oim_server1
# If you are importing or exporting any out of box event handlers, value is oim.
# For rest of the out of box metadata, value is OIMMetadata.
# If you are importing or exporting any custom data, always use application name as OIMMetadata.
application_name=OIMMetadata
# Directory location from which XML file should be imported.
# Lets say I want to import User.xml and it is in the location /scratc/asmaram/temp/oim/file/User.xml,
# I should give from location value as /scratc/asmaram/temp/oim. Make sure no other files exist
# in this folder or in its sub folders. Import utility tries to recursively import all the files under the
# from location folder. This property is only used by weblogicImportMetadata.sh
metadata_from_loc=@metadata_from_loc
# Directory location to which XML file should be exported to
metadata_to_loc=D:/MDS
# For example /file/User.xml to export user entity definition. You can specify multiple xml files as comma separated values.
# This property is only used by weblogicExportMetadata.sh and weblogicDeleteMetadata.sh scripts
metadata_files=/metadata/iam-features-ldap-sync/LDAPUser.xml
# Application version
application_version=11.1.1.3.0
i get the following error
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Starting export metadata script ....
Please enter your username [weblogic] :weblogic
Please enter your password [welcome1] :
Please enter your server URL [t3://localhost:7001] :t3://hostname:7001
Connecting to t3://hostname:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'OIMDOMAIN'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to domainRuntime tree. This is a read-only tree with DomainMBea
n as the root.
For more help, use help(domainRuntime)
Problem invoking WLST - Traceback (innermost last):
File "C:\Oracle\Middleware\Oracle_IDM1\server\bin\weblogicExportMetadata.py";,
line 22, in ?
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\mdsWLSTCommands.py";, line 134, i
n exportMetadata
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\mdsWLSTCommands.py";, line 568, i
n executeAppRuntimeMBeanOperation
File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\mdsWLSTCommands.py";, line 538, i
n getMDSAppRuntimeMBean
UserWarning: MDS-91002: MDS Application runtime MBean for "OIMMetadata" is not available. "exportMetadata" operation failure.
i have exported these files multiple times, it never gave an errror, but this time i see this error, please help.
Thanks in advance

Glad that worked.
Working with MDS, another way is to use the EM console for exporting/importing data from/to MDS. This I find lot easier rather than working with the OOTB script.
Steps are:
http://ADMINSTRATION_SERVER/em
Navigate to Identity and Access, oim. Right-click and navigate to System MBean Browser.
Under Application Defined MBeans, navigate to oracle.mds.lcm, Server:oim_server1, Application:oim, MDSAppRuntime.
To export the configuration files:
•     Click the Operations tab, and then click exportMetaData.
•     In the toLocation field, enter /tmp or the name of another directory.
•     Select createSubDir as false.
•     In the docs field, enter the complete file location as the Element.
•     Also select false for excludeAllCust, excludeBaseDocs, and excludeExtendedMetadata. Then, click Invoke.
This exports the file specified in the docs field to the directory specified in the toLocation field.
To import the configuration files:
•     Click importMetaData
•     In the fromLocation field, enter /tmp or the name of the directory in which you have the configuration files.
•     Select createSubDir as false.
•     In the docs field, enter the complete file location as the Element. For example, /db/oim-config.xml.
•     Also select false for excludeAllCust, excludeBaseDocs, and excludeExtendedMetadata. Then, click Invoke.
This imports the file specified in the docs field to MDS in the toLocation field.
HTH

VSphere Client VERSION 5 - error parsing clients.xml file

hi
i'm trying to connect my server via vsphere client VERSION 5! but i get that stupid error that was common in vsphere 4 "Error parsing the server "SERVER
IP" "clients.xml" file. Login will continue, contact your system administrator"
this error was in vsphere 4 but i get it in vsphere client 5 , any ideas?

Hello Ali Salehi,
Thank you for posting in the TechNet forum.
Have you made any changes before this issue?
As this issue is related to VMware, to receive better support, it is recommended to contact the VMware support.
Additionally, if the program is Vista compatible, you can try Vista compatibility mode. If this isn’t Vista compatible, and you meet the hardware requirements, you can try using the XP Mode. You can find more information at the following link:
http://www.microsoft.com/windows/virtual-pc/get-started.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Error parsing a XML file

Hi!
I'm using the package org.apache.xerces
when I run this code:
DOMParser parser= new DOMParser();
parser.parse(new InputSource(new FileInputStream("test.xml")));
Document doc=parser.getDocument();
Node node=(Node)doc;
NodeList nodeList = node.getChildNodes();
System.out.println("Inicio...");
System.out.println(nodeList.item(0).getChildNodes().item(0).getNodeName());
System.out.println(nodeList.item(0).getChildNodes().item(0).getChildNodes().item(0).getNodeValue());
System.out.println(nodeList.item(0).getChildNodes().item(1).getNodeName());
System.out.println(nodeList.item(0).getChildNodes().item(1).getChildNodes().item(0).getNodeValue());
I get has expected:
one
tag one
two
tag two
But if I put spaces or returns on de xml file I get error. Why I can't format the file. It only works when the text is all on the same line!!

<parent>
<one>Test1</one>
<two>Teste2</two>
</parent>
Your parent element has 5 children. The first is a text element containing only a newline character. The second is a one element. The third is a text element containing only a newline character. The fourth is a two element. The fifth is a ... you get the picture now?

Import error with MPEG-2 files: Brorsoft Video Converter to Apple Prores.

Hi,
The Brorsoft Video Converter software gives me an 'import error' message when I attempt to import files from a folder on my desktop. That folder contains many mpg files (MPEG-2 Video, AC3). Those files in the folder on my desktop came from a Sony video camera.
I need to convert those mpg files to Apple Prores 422 HQ so I can then edit them in Apple Final Cut Pro X.
But when I go to import those mpg files into the Brorsoft Video Converter software, it comes up with a message saying: 'import error', indicating that the Brorsoft Video Converter software does not understand the type of file.
I am on Mac OS X Version 10.6.8.
I've emailed Brorsoft support but I don't think English is their first language – they've emailed back to me asking for clarification of the problem. And I need the problem fixed as I have to edit this video for someone that has many waiting customers.
Could something have changed in the files when I copied them from the video camera to the desktop?
Thanks in advance.
Cheers,
Paul

Hi Tom,
Thanks for your prompt reply. I was using a friend's video camera – I've just texted him for the exact model of Sony video camera. I didn't yet have the Brorsoft Video Converter software when I had to give the video camera back to my friend. So, I copied the files off the video camera to my desktop.
It records onto an internal hard drive. And yes you're right, I don't need to go HQ. I also tried plain Apple Pro Res. That didn't work either. It comes up with 'Import error' message, so it seems like it just doesn't understand the file type.
When I go 'Get Info' on one of the files off the camera, it tells me it is an 'MPEG-2 video, AC3' file.
I'll try and get MPEG Streamclip like you suggested and see if that works.
Thanks again.
Cheers,
Paul

Parsing of JSP File failed

 I have many Jsp files already used at WLS51,
 when I move to WLS6.0 I get the following error:
 Parsing of JSP File '/Ticket/Reservation/ImmigrationSeqNbr.jsp' failed:
 /Ticket/Reservation/ImmigrationSeqNbr.jsp(353): scriptlet close brace '}' unbalanced
 at line 353 which breaks scope '_base_service_scope_'
 probably occurred due to an error in /Ticket/Reservation/ImmigrationSeqNbr.jsp
 line 353:
 finally{
 Can you help me what is the mean of the errro message?
 And how to solve that?
 Thx


 It's telling you there is a syntax error in your JSP. Which would be strange if
 it worked fine in 5.1. Please post the JSP.
 Mike
 "Samuel Pun" <[email protected]> wrote:
 >
 >I have many Jsp files already used at WLS51,
 >when I move to WLS6.0 I get the following error:
 >
 >Parsing of JSP File '/Ticket/Reservation/ImmigrationSeqNbr.jsp' failed:
 >--------------------------------------------------------------------------------
 > /Ticket/Reservation/ImmigrationSeqNbr.jsp(353): scriptlet close brace
 >'}' unbalanced
 >at line 353 which breaks scope '_base_service_scope_'
 >probably occurred due to an error in /Ticket/Reservation/ImmigrationSeqNbr.jsp
 >line 353:
 >finally{
 >
 >Can you help me what is the mean of the errro message?
 >And how to solve that?
 >Thx

Opatch error 'Unable to parse the xml file'

Hi there,
I am new to installing patches on Oarcle and I need to install patch 12375678 on my windows system, Oracle 11.2.0.2.
I have followed the instructions in the readme.txt file, but got this error and I have not come across anywhere on the web that explain how I could fix it.
Could you please advise?
Thanks
C:\>set oracle_home=C:\oracle\product\11.2.0\dbhome_1
C:\>echo %oracle_home%
C:\oracle\product\11.2.0\dbhome_1
C:\>cd C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678
C:\oracle\product\11.2.0\dbhome_1\inventory\oneoffs\12375678>opatch apply
Invoking OPatch 11.2.0.1.1
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : C:\oracle\product\11.2.0\dbhome_1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.2.0.1.1
OUI version : 11.2.0.2.0
OUI location : C:\oracle\product\11.2.0\dbhome_1\oui
Log file location : C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch2
012-05-21_15-28-52PM.log
Patch history file: C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opatch_
history.txt
ApplySession applying interim patch '12375678' to OH 'C:\oracle\product\11.2.0\d
bhome_1'
Running prerequisite checks...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '12375678' for restore. This might take a
while...
Backing up files affected by the patch '12375678' for rollback. This might take
a while...
Patching component oracle.rdbms, 11.2.0.2.0...
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\xml\xsl\kuexttbl.xsl"
Patching component oracle.rdbms.dbscripts, 11.2.0.2.0...
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpd.plb"
Copying file to "C:\oracle\product\11.2.0\dbhome_1\rdbms\admin\prvtbpw.plb"
ApplySession adding interim patch '12375678' to inventory
Interim Patch metadata parsing failure... 'Unable to parse the xml file.'
ApplySession failed: ApplySession failed in system modification phase... 'Unable
to create patchObject'
OPatch will attempt to restore the system...
Restoring the Oracle Home...
OPatch was able to restore your system. Look at log file and timestamp of each f
ile to make sure your system is in the state prior to applying the patch.
OPatch failed with error code = 73

your actions.xml must not be able to be read.
open it in notepad yourself to see does it open, if so its not corrupt, if doesnt open download patch again.
More then likely will be fine so try locate the patch in a shorter home path, like c:\patches\12375678 and see does it install from there.
Only other thing I can think of is the main inventory.xml, usually c:\program files\oracle\inventory\inventory.xml
try notepad with that too.

Need some help with DNG and error parsing the files

Ok, so I found out that I can't open NEF files with CS2 from my Nikon D3100 - unless I upgrade to CS6, or use the DNG converter. I did download the DNG converter that came with the Camera RAW 3.7 (for CS2) in one of Adobe's links, but when I try to convert the NEF files, the DNG converter says "There is an error parsing the file". If it helps, I have Windows 7. Is there a different version of the DNG converter I should be using? Thanks!

A simple Google search will find it. For some reason it isn't on the Adobe website. If you upgrade to CS6 you'll find much improvement in your raw conversions.
http://blogs.adobe.com/lightroomjournal/2012/12/camera-raw-7-3-and-dng-converter-7-3-now-a vailable.html

'Stream requested does not exist' error while importing MPEG-2 file.

Hi.
I received the following error when attempting to import an MPEG-2 file as a Timeline:
'Stream requested does not exist'
What does this mean?
Thanks,
William Johnston

Let me introduce you to the SEARCH link
http://www.adobeforums.com/cgi-bin/webx?126@@.1de98ec0
Go there and enter
Stream requested does not exist
As well as this message thread, there are over a dozen other messages you may read
If you don't find a solution... come back here and post more information
Always provide DETAILED computer and software information, including all hardware and software brand/model and version numbers, with DETAILS about the input files you are using and any output files you wish to create, plus read
How to ask a GOOD Forum question with COMPLETE information
First message gives 5 specific suggestions (you may do #5 for FREE, depending on your problem and purchase date) and then tells how to ask a question in such a manner that you provide all the information that you WILL be asked, for anyone to be able to provide an answer
Second message has advice, and links, concerning optimizing a computer for video editing
Third message concerns things that USED to work, but now do not (and more questions to answer)
Also, for Premiere Pro, check the
Wiki FAQ

Error parsing recording file

Hi,
I am trying to open JRockit recorded xml file with JRA tool. Getting message ' Error parsing recording file'.
Thanks
ranga

For older versions of JRockit, you had to use exactly the same version of JRockit when you created the recording as when you opened it.
With more recent versions (R26.0 and later iirc) it is sufficient if the JRA reader version is >= the version of JRockit producing the recording. Or in other words, make sure you are running the latest version of JRockit on your developer workstation.
-- Henrik

Error parsing PLV file

I get an error message attempting to use the 'Plan Visualizer'. I posted a question on this subject already and got the feedback from one of SAP's own HANA gurus that it probably is due to a bug ( Error parsing PLV file ).
Since I have not seen anybody else raising the same issue and there are others (my assumption) using the same set-up as I am (HANA SP8 on BW740 SP8) I suppose that it is very possible that it is not a real bug (since IF it indeed is a bug, others must have had the same problem).
Is there anyway to get a confirmation if this is a bug (requiring a fix by e.g. OSS) or a problem specific to my installation/set-up/configuration that I might be able to fix (myself or with help).
As you can imagine I am keen on solving this since it is quite a handicap to not be able to analyze the performance in the system.
Thanks.

For older versions of JRockit, you had to use exactly the same version of JRockit when you created the recording as when you opened it.
With more recent versions (R26.0 and later iirc) it is sufficient if the JRA reader version is >= the version of JRockit producing the recording. Or in other words, make sure you are running the latest version of JRockit on your developer workstation.
-- Henrik

"Error parsing MPEG Metadata file.

Similar Messages

Maybe you are looking for