Error Passing an internal table between BSP pages
Any time there is data in the internal table and I try to pass it from one BSP page to the next I get an Web error. I've heard that it is possible to pass an internal table from one page to the next. can anyone point me in the right direction here?
You can do this with the navigation object only if the table is very small. Overwise it overflows 2+KB limitation of URLs.
Alternative ideas is to use server side cookies (search forum for many examples).
If stateful, just hang stuff of your application class.
Similar Messages
-
how do I fill up the internal table on BSP page.
I have the following code in a view
<htmlb:textView text = "PO # "
design = "EMPHASIZED" />
<htmlb:inputField invalid = "false"
value = "po number"
required = "true" />
v_po_num type ref to my_model
but when I execute the BSP, i'm getting "po number" displayed in the PO number field. Couldn't figure out
why it is not displaying the value retrieved from the model method. -
Transfer of Internal Table between BSP's
Hi all,
Can i transfer an internal table across BSP's if so how?
Thanx in advance,
Regards,
Altaf.hai,
ypu can do it by using server side cookies and to know how to dit please see this link.
http://help.sap.com/saphelp_erp2005/helpdata/en/bd/4cd23a09313b37e10000000a11405a/content.htm<a href="http://http://help.sap.com/saphelp_erp2005/helpdata/en/bd/4cd23a09313b37e10000000a11405a/content.htm">http://http://help.sap.com/saphelp_erp2005/helpdata/en/bd/4cd23a09313b37e10000000a11405a/content.htm</a>
cheers -
How to pass internal table between views
Hello Experts,
How to pass an internal table between views? I have followed some steps but its showing an error.
i have created a table type of ZTTYPE_VBAP and line type VBAP.
I have declared in component controllers attribute LT_VBAP of associated type ZTTYPE_VBAP .
But when i am using this in my method in component controller its not taking.Venkata123# wrote:
Hello Experts,
>
> How to pass an internal table between views? I have followed some steps but its showing an error.
>
> i have created a table type of ZTTYPE_VBAP and line type VBAP.
> I have declared in component controllers attribute LT_VBAP of associated type ZTTYPE_VBAP .
> But when i am using this in my method in component controller its not taking.
you will have to declare a node with the attributes in the context tab of component controller. by doing this you will make this node a global one in your entire application . now copy the value you have in the internal table of yours in this node.
after doing so you can read this node anywhere in the program and you can retrieve the values.
regards,
sahai.s -
How to pass a internal table into Java Bean
Hi Experts,
I created a JSPDyn page to display Sales orders form R/3 using bapi_sales_order_getlist.
I used JCO to establish connectivity between JSP Dynpage and R/3. I executed the bapi successfully, i want to move the sales orders retrieved from the Bapi to a Java Bean. So that i can use the bean to populate the value as a table.
with regards,
James.
Valuable answers will be rewarded.....Hi Bala,
If you want to pass this internal table between different methods of the same view then write the contents of this internal table to a context node of your view using BIND_TABLE. You can then read the contents of this internal table from the other method using the reference of that node & the GET_STATIC_ATTRIBUTES_TABLE method.
However if you want to pass the internal table between methods of different views then create a context node at the COMPONENTCONTROLLER level & then do a context mapping of this node to your local views context in both your views. You can follow the same BIND_TABLE & GET_STATIC_ATTRIBUTES_TABLE methods approach.
Regards,
Uday -
How to pass a internal table used in one method to another method in a view
hi all,
Is it possible to pass a internal table from one method to another method in a view??
If so , kindly help me.Hi Bala,
If you want to pass this internal table between different methods of the same view then write the contents of this internal table to a context node of your view using BIND_TABLE. You can then read the contents of this internal table from the other method using the reference of that node & the GET_STATIC_ATTRIBUTES_TABLE method.
However if you want to pass the internal table between methods of different views then create a context node at the COMPONENTCONTROLLER level & then do a context mapping of this node to your local views context in both your views. You can follow the same BIND_TABLE & GET_STATIC_ATTRIBUTES_TABLE methods approach.
Regards,
Uday -
How to export internal table and pass the internal table to another screen?
Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*" REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*" REFERENCE(OUT_RESULT) TYPE CHAR9
*" REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
RaydenHi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*" REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*" REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*" OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden -
How to pass the internal table defined in program to ALV
Hi Friends,
I have a doubt regaring the ALV's,
How can we pass the internal table defined in the program to ALV by not filling the attribute (I_STRUCTURE_NAME) in the REUSE_ALV_LIST_DISPLAY.
I have tried many ways but unable to pass the structure of the internal table. I am getting the error message "Field Catalog Not Specified......" and its terminating and when i am giving the I_STRUCTURE_NAME = 'INTERNAL-TABLE-NAME' then its displaying a blank screen with all the tool-bars and icons...(No output of internal table data is seen on the screen) .
and when i am passing the DDIC table or structure ( for eg. LFA1) to I_STRUCTURE_NAME then its displaying with any error.
Plaese help in resolving this problem....
Regards
Pradeep GoliHi,
Check this thread which gives example of ALV. This will give you an idea.
Interactive ALV
ashish -
How to pass the internal table data to smartforms
Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = T_SSFCTRLOP
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = T_SSFCOMPOP
USER_SETTINGS = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
LT_PRDLBL = LT_PRDLBL1
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PMNehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
<_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks, -
Passing dynamic internal table into ALV
I have made one ALV report where i had created one button 'GENERATE'. ON CLICKING THIS BUTTON the data in the ALV report is downloaded to excel file.
i have used this:-
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
window_title = l_title
default_extension = 'XLS'
initial_directory = 'C:\'
CHANGING
filename = filename
path = path
fullpath = fullpath
user_action = user_action
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
OTHERS = 4.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Check which button is pressed
IF user_action <> cl_gui_frontend_services=>action_ok.
EXIT.
ENDIF.
Download error data collected from the internal table
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
filename = fullpath
filetype = 'ASC'
write_field_separator = '#'
codepage = '4103'
write_bom = c_true
CHANGING
data_tab = gi_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24.
If selection is successful
IF sy-subrc EQ 0.
MESSAGE s004 . " File created successfully
ELSE.
MESSAGE i005 . " File is not created successfully
ENDIF.
In the table i have passed the internal table . this is working fine.
<b>But,
The problem is if i want to display the data in diferent layout based on selection screen criteria the data downloaded are same as default layout.
how to pass a dynamic internal table in the
CALL METHOD cl_gui_frontend_services=>gui_download</b>Hi ,
here is the Program for Download
REPORT yrs_download_transport_request.
PARAMETERS:
p_reqest TYPE trkorr OBLIGATORY,
p_folder(255) TYPE c LOWER CASE, p_sepr OBLIGATORY.
DATA:
folder TYPE string,
retval LIKE TABLE OF ddshretval WITH HEADER LINE,
fldvalue LIKE help_info-fldvalue,
transdir TYPE text255,
filename(255),
trfile(20) TYPE c,
datatab TYPE TABLE OF text8192 WITH HEADER LINE,
len TYPE i,
flen TYPE i.
TYPE-POOLS: sabc, stms, trwbo.
INITIALIZATION.
CONCATENATE sy-sysid 'K*' INTO p_reqest.
IF sy-opsys = 'Windows NT'.
p_sepr = ''.
ELSE.
p_sepr = '/'.
ENDIF.
* CALL FUNCTION 'WSAF_BUILD_SEPARATOR'
* IMPORTING
* separator = p_sepr
* EXCEPTIONS
* separator_not_maintained = 1
* wrong_call = 2
* wsaf_config_not_maintained = 3
* OTHERS = 4.
* IF sy-subrc NE 0.
* MESSAGE s001(00)
* WITH
* 'Unable to find out the separator symbol for the system.'(011).
* ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_reqest.
DATA:
tt_system TYPE TABLE OF tmscsys WITH HEADER LINE,
es_selected_request TYPE trwbo_request_header,
es_selected_task TYPE trwbo_request_header,
iv_organizer_type TYPE trwbo_calling_organizer,
is_selection TYPE trwbo_selection.
iv_organizer_type = 'W'. is_selection-reqstatus = 'R'.
CALL FUNCTION 'TR_PRESENT_REQUESTS_SEL_POPUP'
EXPORTING
iv_organizer_type = iv_organizer_type
is_selection = is_selection
IMPORTING
es_selected_request = es_selected_request
es_selected_task = es_selected_task.
p_reqest = es_selected_request-trkorr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_folder.
DATA: title TYPE string.
title = 'Select target folder'(005).
CALL METHOD cl_gui_frontend_services=>directory_browse
EXPORTING
window_title = title
CHANGING
selected_folder = folder
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
OTHERS = 3.
CALL FUNCTION 'CONTROL_FLUSH'
EXCEPTIONS
cntl_system_error = 1
cntl_error = 2
OTHERS = 3.
p_folder = folder.
AT SELECTION-SCREEN ON p_reqest.
DATA: request_info TYPE stms_wbo_request,
request_infos TYPE stms_wbo_requests.
REFRESH request_infos.
CALL FUNCTION 'TMS_MGR_READ_TRANSPORT_REQUEST'
EXPORTING
iv_request = p_reqest
iv_header_only = 'X'
IMPORTING
et_request_infos = request_infos
EXCEPTIONS
read_config_failed = 1
table_of_requests_is_empty = 2
system_not_available = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR request_info.
READ TABLE request_infos INTO request_info INDEX 1.
IF sy-subrc NE 0
OR request_info-e070-trkorr IS INITIAL.
MESSAGE e398(00) WITH 'Request'(006) p_reqest 'not found'(007).
ELSEIF request_info-e070-trstatus NE 'R'.
MESSAGE e398(00)
WITH 'You must release request'(008)
request_info-e070-trkorr
'before downloading'(009).
ENDIF.
START-OF-SELECTION.
folder = p_folder.
CONCATENATE p_reqest+3(7) '.' p_reqest(3) INTO trfile.
CALL FUNCTION 'RSPO_R_SAPGPARAM'
EXPORTING
name = 'DIR_TRANS'
IMPORTING
value = transdir
EXCEPTIONS
error = 0
OTHERS = 0.
PERFORM copy_file USING 'cofiles' trfile.
trfile(1) = 'R'.
PERFORM copy_file USING 'data' trfile.
trfile(1) = 'D'.
PERFORM copy_file USING 'data' trfile.
* FORM copy_file *
* --> SUBDIR * * --> FNAME *
FORM copy_file USING subdir fname.
DATA:
auth_filename TYPE authb-filename,
gui_filename TYPE string.
CONCATENATE transdir subdir fname
INTO filename
SEPARATED BY p_sepr.
REFRESH datatab.
CLEAR flen.
auth_filename = filename.
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
EXPORTING
activity = sabc_act_read
filename = auth_filename
EXCEPTIONS
no_authority = 1
activity_unknown = 2
OTHERS = 3.
IF sy-subrc <> 0.
FORMAT COLOR COL_NEGATIVE.
WRITE: / 'Read access denied. File'(001),
filename.
FORMAT COLOR OFF. EXIT.
ENDIF.
OPEN DATASET filename FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
FORMAT COLOR COL_TOTAL.
WRITE: / 'File open error'(010), filename.
FORMAT COLOR OFF. EXIT.
ENDIF.
DO.
CLEAR len.
READ DATASET filename INTO datatab LENGTH len.
flen = flen + len.
IF len > 0. APPEND datatab. ENDIF.
IF sy-subrc NE 0.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET filename.
CONCATENATE p_folder '' fname INTO gui_filename.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = flen
filename = gui_filename
filetype = 'BIN'
CHANGING
data_tab = datatab[]
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 24.
IF sy-subrc = 0.
WRITE: / 'File'(002), filename, 'downloaded. Length'(003), flen.
ELSE.
FORMAT COLOR COL_NEGATIVE.
WRITE: / 'File download error. Filename:'(004), filename.
FORMAT COLOR OFF.
ENDIF.
ENDFORM. "copy_file
Reward points if it is usefull....
Girish -
Passing an Internal Table as parameter to a method
Hi,
Can we pass an internal table as a parameter to a method.if so how can we do that?i am new to abap objects..Hi Matt,
Here is the code that i am trying to execute.I am extracting the data in the method "Extract" and passing it to the method "Display" to produce a report output.When i execute this it is giving me an error saying that t_mara is not an internal table since i just refered it with x_mara in the class definition.So how can i modify this code to pass t_mara as an internal table from the method "Extract".Please help me.
*& Report ZOBJ_PRAC *
REPORT zobj_prac .
CLASS example DEFINITION
CLASS example DEFINITION.
PUBLIC SECTION.
TYPES : BEGIN OF x_mara,
matnr TYPE matnr,
ersda TYPE ersda,
END OF x_mara.
METHODS : extract EXPORTING t_mara TYPE x_mara,
display IMPORTING it_mara TYPE x_mara.
ENDCLASS. "example DEFINITION
"example IMPLEMENTATION
CLASS example IMPLEMENTATION
CLASS example IMPLEMENTATION.
METHOD extract.
DATA :lt_mara TYPE STANDARD TABLE OF x_mara INITIAL SIZE 0,
lw_mara TYPE x_mara.
SELECT matnr ersda FROM mara INTO TABLE lt_mara UP TO 10 ROWS.
t_mara[] = lt_mara[].
ENDMETHOD. "extract
METHOD display.
DATA :lt_mara TYPE STANDARD TABLE OF x_mara INITIAL SIZE 0,
lw_mara TYPE x_mara.
lt_mara[] = it_mara[].
LOOP AT lt_mara INTO lw_mara.
WRITE:/ lw_mara-matnr,
20 lw_mara-ersda.
ENDLOOP.
ENDCLASS. "example IMPLEMENTATION
START-OF-SELECTION.
DATA : b1 TYPE REF TO example.
CREATE OBJECT b1 TYPE example.
TYPES : BEGIN OF x_mara,
matnr TYPE matnr,
ersda TYPE ersda,
END OF x_mara.
data : t_mara type standard table of x_mara initial size 0,
it_mara type standard table of x_mara initial size 0.
call method b1->extract
importing
t_mara = t_mara.
it_mara[] = t_mara[].
call method b1->display
exporting
it_mara = it_mara.
Edited by: Sai Chaitanya on Dec 2, 2008 5:30 AM -
How to submit a report ,Passing the internal tables from parent report
How to submit a report ,Passing the internal tables from the parent report ?
The SUBMIT statement executes a report from within a report. i.e. you could have a drill-down which
calls another report. Can only execute reports of type '1'.
*Code used to execute a report
SUBMIT Zreport.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
seltab_wa-low = pnppernr-low.
append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
*Example Code (Retrieving list from memory)
DATA BEGIN OF itab_list OCCURS 0.
INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
filler1(01) TYPE c,
field1(06) TYPE c,
filler(08) TYPE c,
field2(10) TYPE c,
filler3(01) TYPE c,
field3(10) TYPE c,
filler4(01) TYPE c,
field4(3) TYPE c,
filler5(02) TYPE c,
field5(15) TYPE c,
filler6(02) TYPE c,
field6(30) TYPE c,
filler7(43) TYPE c,
field7(10) TYPE c,
END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = vlist
listobject = itab_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
Submit report as job
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif. -
How to pass an internal table to LVC_FIELDCATALOG_MERGE
Hi Abap'ers
I want to know how to pass an internal table to the function module LVC_FIELDCATALOG_MERGE, as like we do in the FM REUSE_ALV_FIELDCATALOG_MERGE.
For Eg
v_name = 'I_OUTPUT'.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = wrk_repid
i_internal_tabname = v_name
i_inclname = wrk_repid
changing
ct_fieldcat = wrk_fld_cat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
Where I_OUTPUT is the internal table name.Re: LVC_FIELDCATALOG_MERGE with internal table
Check this
In PBO,
Building the field catalog
PERFORM f9001_build_field_cat TABLES i_fieldcat
USING 'ZCSA_MARKETIING_EXPENSE_OUTPUT'
FORM f9001_build_field_cat TABLES p_fieldcat STRUCTURE lvc_s_fcat
USING value(p_structure).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_structure
CHANGING
ct_fieldcat = p_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE i013 WITH text-e05."Error in ALV field catalogue creation
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " f9001_build_field_cat
U can create a structure or example pass MARA then it will take the structure of MARA. -
How to Pass the Internal table of a report to Smart Form
Hi Experts,
I have one report in which from selection screen i am getting the values from the users, and upon that values i am filling data in to the internal table.
Now i want to pass that internal table data to the smart form
and print that data in the smart form.
So could you pls give me some pseudo code or any steps to achieve it.
Thanks & Regards,
DSHi DS,
First of all you need to create a SF and then need to call the FM generated by the FM in your report.
In the SF in the form interface>tables tab>mention the name of the table and its type structure.
Pls note that a new structure has to be created as the same type of your internal table which holds the data.
And the import and export parameters as just the same as in a FM.
Now after you create and activate your SF a FM will be generated (wen u execute your SF you will be taken to this SE37 screen with the name of FM so no probs..)
You can call this FM in your report. Hope this helps.
Ex:
say itab has your final data, and you also want to export a variable var1 to the SF.
after your normal report operations end, call the FM and pass on these data.
say your FM name is FM1.
call function FM1
exporting
var1 = var1
tables
itab1 = itab1.
pls note that in the SF also i gave the same names, it is not mandatory to give the same names.
and as you want to print a table in the smartforms, you need to create a table in the smart forms and then display the data which is quite simple.
Hope this helps...
if you need any further explanations, pls revert...
Regards,
Narendra.
Reward points if helpful!!! -
Passing an internal table WITH HEADER LINE to abap object
Hi. In another thread, it was explained how to pass an internal table to an abap object method. Is it possible to pass an internal table that has a header line, and RETAIN the header line once the table has been passed?
My problem is, that I can pass the table, update it, but the read buffer is not populated when returning from the object's method. This is the result of being able to pass a STANDARD TABLE type, but not a STANDARD TABLE WITH HEADER LINE.
This means that I have to read the table into a work area instead of doing a READ TABLE LKNA1 within the method, which is what I need to do.
Thanks.Please check this sample program, notice that it is modifing the internal table and passing it back modified as well as passing the "work area" or "header line" back thru the exporting parameter.
report zrich_0001.
* CLASS lcl_app DEFINITION
class lcl_app definition.
public section.
types: t_t001 type table of t001.
class-data: it001 type table of t001.
class-data: xt001 like line of it001.
class-methods: change_table
exporting ex_wt001 type t001
changing im_t001 type t_t001.
endclass.
data: w_t001 type t001.
data: a_t001 type table of t001 with header line.
start-of-selection.
select * into table a_t001 from t001.
call method lcl_app=>change_table
importing
ex_wt001 = w_t001
changing
im_t001 = a_t001[] .
check sy-subrc = 0.
* CLASS lcl_app IMPLEMENTATION
class lcl_app implementation.
method change_table.
loop at im_t001 into xt001.
concatenate xt001-butxt 'Changed'
into xt001-butxt separated by space.
modify im_t001 from xt001.
endloop.
ex_wt001 = xt001.
endmethod.
endclass.
Regards,
Rich Heilman
Maybe you are looking for
-
BAPI for Scheduling a background job
Hi all, is there any bapi for scheduling a background job? i mean can we do background job using bapi If not how can we create a bapi for scheduling a background job. Thanks & Regards, Azhar
-
Special TEXT doesn't appear as it should when published
I used a spiffy font on my website, but after it's published, it doesn't show up on Mac or PC. It reverts to some arial-type font. I used to be able to keep the font by putting a shape over it and making it opaque, but I don't remember exactly how I
-
How to create and modify an infotype in E-recruiting?
Hi All, it's necessary to add some fields specifics of the country for the ID , can i use the Customer Include for the infotype 0001 or it's possible create a new infotype? Thank's Best Regards
-
Pdf file saving text information blank
i am trying to fill out a pdf file, but when i save it, it saves the information i have filled out blank.
-
Create a Calendar item from sms
Hi, there is a way to create a calendar event from a "link" in a sms? Example SMS: "Hello, your appointment is for 02/02/2013 at 10:15" I would like that when i receive the sms on my iphone, was created a calendar event for the specified time, or whe