Error performing existence check for database
I am new to oracle . I installed oracle 10. As basic installation. When I tried to generate new database from node I got error. Error log file shows
*** traceback - mtidbLogin : (-19)
*** traceback - baseExecuteStandalone : (-19)
*** traceback - baseExecuteFile : (-19)
*** traceback - msqlExecuteFile : (-19)
How to handele this error.
Sanaru
Sanaru,
so far you didn't respond to any of the questions asked. 'An application' again doesn't tell anything.
To create a database in Oracle you would need to use the 'Database Creation Assistant' or sql*plus.
As you seem to think Oracle is SQLserver sold by a different vendor, you use your own application, which creates a SQLserver database, to create an Oracle database. This is not going to work ever. A database in SQLserver is a schema in Oracle.
Also creating an Oracle database in an installation program is a very bad idea.
No professional Oracle DBA will allow this.
It can be done, but you would need to run Database Creation Assistant in silent mode.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?
Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.
-
So I bought a Powerbook G4 from a pawn shop and yes, I did check to see if it was still good. everything works fine but I need an update because I have OS X 10.3. So I connect to the internet and then I click on ''Software Update'' and I wait. But then a message opens saying ''An error occurred while checking for updates'' And I don't know why. HELP!!!
Something temporarily wrong with your internet connection?
Be aware that this is a very large file to download, it needs a strong consistent internet connection.
Have the iPhone on the charger cable too.
In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware). -
"software update" "An error occurred while checking for updates"
When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response. -
ERROR 801881e1 while checking for phone update
i get the following ERROR 801881e1 while checking for my phone update. I really want some solution. pls help if anyone knows about this. i really want the amber update.
Try this ..
Go to settings-->keyboard-->add keyboard and select any .. let it download to the phone ..
Now check for the update ...
If it goes thru' fine, you may remove the added keyboard by again going to settings-->keyboard and long press on the one you want to .. then select 'remove' .. -
i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
the same thing happens in my ipad too.Thank you! I've been trying all day to get this to work! and finally i found the answer!
amensistech wrote:
I found a fix for this.
Go to Wifi Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
Set the DNS to 8.8.8.8 and then go back to the software update page.
This time it shall work.
I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
Do rate me and reply if it works. -
Error as Attribute check for Asst, Govt & Parl Bus & PA to Dpty Chair fail
Hi,
I have created a new user and the user can not use the "SHOP" transaction in SRM portal. He is getting the error "Attribute for user XXXX contains errors. Inform system admin".
I have checked the org. stracture through PPOSA_BBP and find the error as "Attribute check for YYYY failed".
Could any body please suggest me what I need to do now?
where,
XXXX----name of the user
YYYY----Position of the user
Thanks,
PijushhI
users_gen
execute
now select
copy user and employee data from template
and
now
select radio button
create users from existion su01 users (since you have already created SU01 user in gui)
then execute
org id 5XXXXXXX - where do you want to assign the user ( this is org id from ppoma_bbp)
and selcect country of that org .(country must be mentioned in org 5XXX in the address tab)
and continur
and area of users
type your user id and execute
muthu -
An error occured while checking for a software update!
unable to check for update,an error occured while checking for a software update! thats the one who appear to my setting please help me!
Hi there,
You may find the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
Oracle Error occured, while checking for Already Committed data
Hi,
In my 1 day old workspace I see more than 3000 errors logged in the owb_error_log_table with text as shown below , can someone from Oracle please advise what the problem seems to be ?
Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.2.en_GB
Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.1.en_GB
Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.1.en_GB
Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.2.en_GB
There are many more examples of other errors as well. Google returns nothing for these error....am I the first one to face these errors. We are using 11gRelease2 on RHEL.
They all have a error text of ORA-01403: no data found
tks in advance.I haven't been able to pin it down to a specific action that causes these errors. I have been having various other problems when importing tables ...the screen just freezes and nothing happens. When I queried this table from sql developer to check if I can spot anything and I found these errors.
The screen freezes when I add a new oracle location - the test works fine - but when I click OK to the add oracle location screen it just freezes and nothing happens. -
error message: Unable to check updates. an error accured while checking for a software update.
It is all in your WIFI.
I have 2 internal Wifi networks at home. In one (family) the software update works immediately, in the other one (guess) it gives me the same error "Unable to Check for Udpate" ... The guess network I did set up carries some restrictions being the reason why the update does not work. -
Wanted to. Update my ipad2 wirelessly,went to general,software update,then message appers:"unable to check for update an error occurred while checking for a software update." how do I fix that?
Try set DNS to 8.8.8.8 (do not change the other numbers)
http://i1224.photobucket.com/albums/ee374/Diavonex/53526605.jpg -
I Can't able to download IOS 7. I n my software update it is giving an error " Unable to check for updates. An error occured while checking for software update". What can be done for this error?
Me too having the same thing what's the solution for this how can I update
-
Script Error message when checking for updates....
Post Author: rcoleman
CA Forum: General Feedback
Getting a Script Error message when checking for updates or logging in to Crystal Reports. CR Developer v XI 11.0.0.1994.
Script Error
Line 481
Position 41
If g3()=True then main=True: Exit Fun
FYI to the Site Administratorparkerpress wrote:
Any idea how to solve this if I haven't activated the 3GS service? I've been doing fine on wireless only.
Steve
Same problem here. After upgrading to iOS 4.2.1 a couple of weeks ago I'm getting the same error as the OP in the first post. I've never activated the 3G service.
I tried turning the cellular service on and checking for updates, pulled and replaced the SIM card, rebooted, nothing helps. I'm still getting the error when I click on the "Check for Update" button in iTunes (v10.1) when my iPad 64GB 3G is connected to my iMac. Any help would be appreciated. TIA. -
ORA-01423: error encountered while checking for extra rows in exact fetch
ERROR at line 1:
ORA-01423: error encountered while checking for extra rows in exact fetch
ORA-01722: invalid number
ORA-06512: at "Department.get_emp_name", line 57
ORA-06512: at line 14
Hi
The above are the error messages I am running into and I am not sure what it means at all. I do have a query which select few rows into cursor
cursor c_requested is
select * from departments where emp_id in (1, 2, 3)
now from these rows I again creating a query dynamically
open c_requested;
loop
fetch c_requested into deptID, name, authorized; -- declared variables
exit when c_requested%NotFound;
sqlstring := 'Select name from employees where deptID = ' || deptID || ' and Authorized = ' || authorized;
begin
execute immediate sqlstring into description; -- declared variable
exit;
exception when no_data_found then
description := 'FILTER_OUT';
end;
end loop;
close c_requested;
This code is inside a function get_emp_name(). When I execute this function I am getting the above errors. I really appreciate all your help. Please let me know if you need more information.
Thank you very muchThank you very much damorgan,
I looked through my code and figured out what was wrong. I had a varchar2 column in the table where I was passing a value 999 instead of '999'. Thanks again.
I have one more question. I am using cursor to loop through.. here is my code
rowcount integer;
cursor c_emp is
select * from employees where empID in (....);
begin
open c_emp;
rowcount := c_emp%RowCount;
loop
end loop;
dbms_output.put_line(rowcount);
end;
I am getting rowcount = 0 even though there are many values in it. I am not sure if I am using the where clause properly. Any help would be appreciated.
thank you. -
My IPhone won't let me update software. Mess is- unable to check for update. An error occurred while checking for software update. What is wrong?
amm wait..first download the latest software (7.1.1) from the verified page..
then after the download completes.. back up ur device !
then after the back up completes.. turn off ur device
after that process jst hold down the home button for about 10 seconds and without leaving the button connect the usb cable to the pc. this process takes ur phone to the recovery mode!
now on the itunes press (shift ) and then click on update it opens some opener of the files now select the latest software that u've jst downloaded from the internet now there go..
Maybe you are looking for
-
Hi I've been digitizing my LP collection using the AIFF file format. Most songs are in the 30-40MB range and my 320 GB HD is filling up fast. My plan is to get Apple TV, play them over my home theater speakers and get rid of the LPs when I'm done. I
-
Problem when using Ctr-Z in Java editor
If I create a component in the Desgin view, the switch to Java Editor and uze Cancel (or Ctrl+Z), it cancle the op�ration, ie remove the code added when the component was created. The component is also removed in Design view. However, it is stil pres
-
Difference in sending/testing message from IE and AE of RWB
Hi Experts, Is there any difference in sending/testing a message from IE and AE of Component Monitoring in RWB? Please provide your inputs. Thanks. Regards Bhanu. Edited by: Bhanu Tiruveedula on Nov 11, 2009 8:09 PM
-
My iPhoto has been doing this for the past 4 days. The pinwheel never goes away. I have forced quit countless times and still it does not work. I have looked all over the internet but have yet to find a solution that makes my iPhoto usable again. Can
-
Revision: 6809 Author: [email protected] Date: 2009-05-11 16:00:50 -0700 (Mon, 11 May 2009) Log Message: