Error: Photo Delivery Failed
Every time I try to email a photo I get this error:
Photo Delivery Failed
A copy has been placed in your Outbox. Operation could not be completed.
(NSStreamSocketSSLErrorDomain error -9829.)
My default e-mail account is GMail imap, and I have no problem sending text-only email messages.
Any thoughts?
I'm having this issue now on my iPhone.
I'm using Gmail via POP to send email. I can send text messages w/o any problems, however when I send photos I get the following error:
Photo Delivery Failed
A copy has been placed in your Outbox. Operation could not be completed. (NSStreamSocketSSLErrorDomain error -9829.)
I assume that the fix is to delete my email account on my iphone and then resync or something similar... but before I do this I'm hoping that someone can verify a set of steps to solve this issue.
Similar Messages
-
"photo delivery failed" yet photos are received and keep sending
i have the first gen iphone and have a problem since november, sending photos...getting the error message "Photo Delivery Failed" yet photos are received and it keeps sending it 3 - 6 times. the first time it happened it sent up to 40 times to the annoyance of my family....unfortunately i had sent the photo to several family members! i shut off the phone completely. but once i rebooted the next day, it continued resending and giving me the error message, just not so many times now. i am reluctant to send photos to anybody now. but i know it still happens because i send photos from my iphone for work purposes to my work email quite often. (my employer won't allow to install itunes to download them on my work computer...)
Ok, I'm not the only one having this problem! Anyone? I've tried deleting the yahoo account and reinstalling and that hasn't worked.
-
Photo Delivery Failed - then iPhone sends 6-8 copies of the Photo
Photo Delivery Failed - then iPhone sends 6-8 copies of the Photo, each a minute a part?
iPhone 3G ver 2.1, happens on edge & 3G, wifi seems to handle the photo
these are pics shot from the iPhone 3G itself, any ideas?Help! I have the same issue. I use YAHOO. When I send a photo from my iPhone, it gives an error message "Photo Delivery Failed". I click ok. The Photo was actually sent to the email address even though I had the error message. Next time I unlock the iPhone, I see the Photo Delivery Failure message again. The iPhone then proceeds to send multiple copies of the photo to the email address. I cannot stop it from sending duplicates.
Any suggestions? -
Trying to setup an Exchange 2013 server, with the DC and Exchange on same machine. WHen I try to deliver for either of the 2 mailboxes I have setup, I get this error.
The server returned status code 451 - Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
It doesn't seem to be a resource issue (I'm running an XL instance on Azure), and all other connectivity works fine (and fast). I just can't receive email there.
Looking in the event logs, I saw one issue related to the Front End HTTP proxy, but I wouldn't assume that's relevant here. (And connectivity via Outlook & OWA seem to be fine, with the exception
of some redirect issues on the latter).
I did end up installing Exchange on a secondary drive for space considerations, so the location is different... not sure if that would factor in either.
Any ideas? I don't even really know where to start debugging this. I'm trying to set this up to work on some event sync/forwarding code.Ok, I think I solved my problem but figured I would update here for others who may be running into the same issue.
In my \Exchange\TransportRoles\Logs\FrontEnd\ProtocolLog\SmtpReceive\*.LOG, I found more detailed information on the issue.
"Message or connection acked with status Retry and response
451 4.4.0 Error encountered while communicating with primary target IP address: ""421 4.2.1 Unable to connect.""
Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 10.10.10.1:2525"
I thought creating an endpoint for 25 would be sufficient, but once I created another endpoint for 2525 then my tests started working. -
Photo upload to iCloud fails with the error message 'Upload failed due to network error'. Ideas?
I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?
I doubt this issue is related to the Mac Mini specifically.
I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
Upload Failed
44 items were not uploaded due to a network error.
However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
Expanding Details shows the following log:
https://gist.github.com/jameswthorne/757e319b9fee63119890 -
Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!
Did this ever get resolved, as I am having the same issue. Trying to learn LR5 AFTER a decade using Aperture. I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message. Using latest version of Mac OS X.
-
All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?
Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key ) -
During the verification phase of burning photos it fails yet it seems that all the photos are there?
during the verification phase of burning photos it fails yet it seems that all the photos are there?
Greetings,
Verification occurs after the burn is complete. The computer goes back to check the disk it just completed burning for errors. The disk is burned, it just didn't burn to the computer's satisfaction and may contain errors that will prevent it from working either on this computer or others. Then again it may work fine if it is a very minor error.
Common causes:
Low quality DVD/CD media
DVD/CD media that does not match the specifications for the drive in the computer
Resolutions:
Buy a brand of DVD/CD that has a reputation for making quality media
Check to see what speeds your optical drive in your computer supports: http://support.apple.com/specs/#imac
--- Once you locate your model on the specs page search for the word "optical" and make note of the speed of disks the drive uses. If your drive says it burns at 8x for example and you purchase a 16x disk then the disk does not match the drive.
Hope that helps! -
eprint center shows computr connected email address is allowed to send email to printer but when i send email get mail delivery failed this is a permanent error 550 5.7.1 command
For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee -
Error: Windows Vista failed to start. A recent hardware or software change might be the cause
PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance. -
SEVERE ERROR: Starting system failed, rc=0
Hi Experts
I am having problem in SRM 2.0 to SRM 5.5(NW 7) Upgrade. I have problem in startup of Shadow Instance. Here is log description.
more DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 01] Wed Jan 9 17:56:30 2008
[Thr 01] WLM Tag 'ED2/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4722694
*[Thr 01] **LOG Q01=> MsSInit, MSStart (Msg Server 1 4722694) [msxxserv_mt. 1824
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] load acl file = /usr/sap/put/ED2/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 01] HTTP logging is switch off
*[Thr 01] **LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3174]
*[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8*
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:8100) [nixxi.cpp 3174]
*[Thr 01] *** ERROR => MsHttpCommInit: Ni2Listen(8100) (rc=NIESERV_USED) [msxxhtt*
p_mt. 3444]
*[Thr 01] *** ERROR => MsHttpPortBind: MsHttpCommInit (port=8100) [msxxhttp_mt. 3*
847]
*[Thr 01] *** HTTP port 8100 state CLOSED ****
[Thr 01] MsHttpOwnDomain: own domain[1] = ent.agt.ab.ca
[Thr 01] ms/icf_info_server : deleted
*[Thr 01] *** I listen to port sapmsSHDED2 (3605) ****
[Thr 01] CUSTOMER KEY: >N1501146322<
more STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080109175630")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPED2
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPED2
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX
_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/ED2/SYS/exe/run
4 ETQ399 ext. env.: LIBPATH=/usr/sap/ED2/SYS/exe/run:/usr/lib:/lib:/usr/sap/ED2/
SYS/exe/run
4 ETQ399 2008/01/09 17:56:30: put_execute: (startsap) forkpid:9027768
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
You help & time in this matter will be highly appreciated.
Thanks & Regards
JigneshHi Marcus
Thanks for quick response. I did same exercise earlier. Shadow Instance started without dispatcher.
iedm3330dd:ed2adm> ps -ef | grep ED2_DVEBMGS01
ed2adm 4817018 7942216 0 09:16:45 - 0:00 ms.sapED2_DVEBMGS01 pf=/usr/s
ap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4821170 7942216 0 09:16:45 - 0:00 co.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4849734 7942216 0 09:16:45 - 0:00 se.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4853912 8847520 0 10:01:29 pts/1 0:00 grep ED2_DVEBMGS01
Log file :
iedm3330dd:ed2adm> pwd
/usr/sap/put/ED2/DVEBMGS01/work
iedm3330dd:ed2adm> more dev_disp.new
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid ED2
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 4853984
Thu Jan 10 09:16:46 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4853984) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 111 successfully loaded
shared lib "dw_xtc.so" version 111 successfully loaded
shared lib "dw_stl.so" version 111 successfully loaded
shared lib "dw_gui.so" version 111 successfully loaded
shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
WARNING => DpNetCheck: NiServToNo(sapdp01) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw01) failed (rc=-3) [dpxxtool2.c 5223]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >iedm3330dd_ED2_01 <
DpShMCreate: sizeof(wp_adm) 7488 (936)
DpShMCreate: sizeof(tm_adm) 4957464 (24664)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548040/548048
DpShMCreate: sizeof(comm_adm) 548048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 7000000000a6000, size: 5603560)
DpShMCreate: allocated sys_adm at 7000000000a6000
DpShMCreate: allocated wp_adm at 7000000000a7ba0
DpShMCreate: allocated tm_adm_list at 7000000000a98e0
DpShMCreate: allocated tm_adm at 7000000000a9940
DpShMCreate: allocated wp_ca_adm at 700000000563e58
DpShMCreate: allocated appc_ca_adm at 7000000005684a8
DpShMCreate: allocated comm_adm at 700000000569c18
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 7000000005ef8e8
DpShMCreate: allocated gw_adm at 7000000005ef968
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 7000000005ef998
DpShMCreate: allocated wall_adm at 7000000005ef9a0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed (--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:16:56 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 10 16:16:56 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl Us
er Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Thu Jan 10 16:16:56 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 1870]
Dump of tm_adm structure: Thu Jan 10 16:16:56 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jan 10 16:16:56 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:17:01 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >iedm3330dd_ED2_01 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x110750af0 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 1, 3 )
ShmCreate( 1, 0, 2, -> 0x7000000000a4000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 2, 3 )
ShmCreate( 2, 0, 2, -> 0x7000000000a6000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x700000030000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 14, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 11, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 33, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 42, 0, 2, 0xfffffffffffec78 )
Profile configuration error detected, use temporary corrected setup
Shared Pool 40: ipc/shm_psize_40 = 68000000 (too small)
Shared Pool 40: (smaller than default 112000000)
Shared Pool 40: (default size assumed 112000000)
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 43, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 45, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 44, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 54, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 46, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 47, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 17, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 34, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 58, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 51, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 52, 3 )
ShmCreate( 52, 0, 2, -> 0x700000000600000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 30, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 56, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 10, 3 )
ShmCreate( 10, 0, 2, -> 0x700000000000000 )
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 57, 0, 2, 0xfffffffffffec78 )
ShmCreate( 10, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 10 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0xfffffffffffed60 )
ShmKeyPermission( 62 ) = 0740 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0xfffffffffffed70 )
ShmGet( 10, 31, 0, 2, 0xfffffffffffebf8 )
ShmCreate( 10, 0, 2, 0xfffffffffffea18 )
ShmKeyPermission( 10 ) = 0740 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 4853984) [dpxxdisp.c 10631]
shutdown completed - server stopped ***
I have already requested for port entry change in services file.
Jignesh -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you
Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen -
An error has occurred: "Failed to process the request."
I try to make a deploy and this error appears:
[code]An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Product: null, Vendor: null, Version: null, Build ID: 6.3007.00.0000.20040726091658.0000 (release=630_VAL_REL, buildtime=2004-07-29:21:25:09[UTC], changelist=267691, host=PWDFM026), Build Date: Fri May 06 16:36:04 VET 2005
Web Dynpro code generators of DC local/PruebasEstilos:
SapDictionaryGenerationCore: 6.4014.00.0000.20050818151336.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:08:16[UTC], changelist=363802, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4014.00.0000.20050818152356.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:11:31[UTC], changelist=363818, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:18[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapGenerationFrameworkCore: 6.4014.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:01:32[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:15:40[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4014.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:05:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:26[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:16:08[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/progmodel/gci/IGCIComponentDelegate
Loader Info -
ClassLoader name: [local/PruebasEstilos]
Parent loader name: [Frame ClassLoader]
References:
common:service:http;service:servlet_jsp
service:ejb
common:service:iiop;service:naming;service:p4;service:ts
service:jmsconnector
library:jsse
library:servlet
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:j2eeca
library:jms
library:opensql
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
interface:resourcecontext_api
interface:webservices
interface:ejbserialization
sap.com/tcwddispwda
sap.com/tcwdcorecomp
service:webdynpro
service:sld
library:tcddicddicservices
library:com.sap.aii.proxy.framework
library:tcgraphicsigs
library:com.sap.mw.jco
library:com.sap.lcr.api.cimclient
library:sapxmltoolkit
library:com.sap.aii.util.rb
library:com.sap.util.monitor.jarm
library:tcddicddicruntime
library:com.sap.aii.util.xml
library:tccolapi
library:com.sap.aii.util.misc
library:tc~cmi
library:tccolruntime
Resources:
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\local\PruebasEstilos\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
The error occurred while trying to load "sap.wdp.InternalTest1".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:328)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:40)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doInit(ClientComponent.java:775)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:329)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:356)
at com.sap.tc.webdynpro.clientserver.task.Task.createApplication(Task.java:219)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:547)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:57)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:139)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:101)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:38)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
[/code]
I don't know what does it mean, I will appreciate it any helpfull information as soon as possible(urgent).
TokioHi, Armin
In fact I'm using NWDS SP14 but I don't know what is the version of Web AS.
I was reading and posting few days ago some question about install and uninstall Web AS, J2EE Server, etc. I could do something but just when I' trying to deploy and run NWDS Application that error occurred.
Well, I supose in this case I have to install a new version of Web AS, from the "SDN Download Catalog" what I must to do? ...
In Download - Sneak Preview SAP NetWeaver page, what exactly I have to download to install:
<i>Download file 1 (1.9GB)
Download file 2 (1.9GB)
Download file 3 (.5GB)
Download file 4 (.8GB)</i> ?
Thanks for your help...
Tokio
Maybe you are looking for
-
How do I transfer my ipod libray from one computer to another?
I had my library on another computer that I no longer have access to. How do I transfer what is on my ipod onto my itunes library? I don't want to lose my 600+ songs!!
-
Just moved our ASP 2.0 based web application to a Windows 2012 Standard Cloud Server. A directory is used for temporary copying of files for the application. The Read Write access is properly given and everything works but then stops working in abo
-
I have downloaded an album and one of the songs quit after 15 secs, any ideas
-
Hi all, i am calling RFC FM in SRM from R3..this RFC FM is a ZFM..it contains PRPS-POSID values..so..for conversion of values to SRM i m using CONVERSION_EXIT_ABPSN_OUTPUT in RFC ZFM..but here i am converting each and every POSID values before checki
-
Mail trigger for Task assigned in collaboration room
Hi, When a task is assigned to an user, mail does not get triggered to the assignee, but triggers to only tracker. Is it possible to trigger mail for the assignee to?. Also is there any way to set alert mail for the tasks both for assignee and tracke